Kolab Groupware OBS

kolab-syncroton.spec Changed

debian.changelog Changed

kolab-syncroton-2.3.19.tar.gz/composer.json-dist -> kolab-syncroton-2.3.20.tar.gz/composer.json-dist Changed

kolab-syncroton-2.3.19.tar.gz/config/config.inc.php.dist -> kolab-syncroton-2.3.20.tar.gz/config/config.inc.php.dist Changed

kolab-syncroton-2.3.19.tar.gz/lib/ext/rtf.php -> kolab-syncroton-2.3.20.tar.gz/lib/ext/rtf.php Changed

@@ -214,20 +214,20 @@
             $flagCount = 0;
             $flags = 0;
             while ($out<$oblen) {
-                $flags = ($flagCount++ % 8 == 0) ? ord($src{$in++}) : $flags >> 1;
+                $flags = ($flagCount++ % 8 == 0) ? ord($src[$in++]) : $flags >> 1;
                 if (($flags & 1) == 1) {
-                    $offset = ord($src{$in++});
-                    $length = ord($src{$in++});
+                    $offset = ord($src[$in++]);
+                    $length = ord($src[$in++]);
                     $offset = ($offset << 4) | ($length >> 4);
                     $length = ($length & 0xF) + 2;
                     $offset = (int)($out / 4096) * 4096 + $offset;
                     if ($offset >= $out) $offset -= 4096;
                     $end = $offset + $length;
                     while ($offset < $end) {
-                        $dst{$out++} = $dst{$offset++};
+                        $dst[$out++] = $dst[$offset++];
                     };
                 } else {
-                    $dst{$out++} = $src{$in++};
+                    $dst[$out++] = $src[$in++];
                 }
             }
             $src = $dst;
@@ -249,7 +249,7 @@
         $c=0;
         $end = $off + $len;
         for($i=$off;$i < $end;$i++) {
-            $c=$this->CRC32_TABLE[($c ^ ord($buf{$i})) & 0xFF] ^ (($c >> 8) & 0x00ffffff);
+            $c=$this->CRC32_TABLE[($c ^ ord($buf[$i])) & 0xFF] ^ (($c >> 8) & 0x00ffffff);
         }
         return $c;                                                                                                                              
     }

kolab-syncroton-2.3.19.tar.gz/lib/kolab_sync_data_calendar.php -> kolab-syncroton-2.3.20.tar.gz/lib/kolab_sync_data_calendar.php Changed

@@ -894,14 +894,14 @@
             }
         }
 
-        if ($value && $value instanceof DateTime) {
-            if ($event['start'] && ($interval = $event['start']->diff($value))) {
+        if (!empty($value) && $value instanceof DateTime) {
+            if (!empty($event['start']) && ($interval = $event['start']->diff($value))) {
                 if ($interval->invert && !$interval->m && !$interval->y) {
                     return intval(round($interval->s/60) + $interval->i + $interval->h * 60 + $interval->d * 60 * 24);
                 }
             }
         }
-        else if ($value && preg_match('/^([-+]*)[PT]*([0-9]+)([WDHMS])$/', $value, $matches)) {
+        else if (!empty($value) && preg_match('/^([-+]*)[PT]*([0-9]+)([WDHMS])$/', $value, $matches)) {
             $value = intval($matches[2]);
 
             if ($value && $matches[1] != '-') {
@@ -925,7 +925,7 @@
     protected function to_kolab_alarm($value, $event)
     {
         if ($value === null || $value === '') {
-            return (array) $event['valarms'];
+            return isset($event['valarms']) ? (array) $event['valarms'] : array();
         }
 
         $valarms     = array();
@@ -943,8 +943,8 @@
         }
 
         $valarms[] = array(
-            'action'      => $current['action'] ?: 'DISPLAY',
-            'description' => $current['description'] ?: '',
+            'action'      => !empty($current['action']) ? $current['action'] : 'DISPLAY',
+            'description' => !empty($current['description']) ? $current['description'] : '',
             'trigger'     => sprintf('-PT%dM', $value),
         );

kolab-syncroton-2.3.19.tar.gz/lib/kolab_sync_data_email.php -> kolab-syncroton-2.3.20.tar.gz/lib/kolab_sync_data_email.php Changed

kolab-syncroton-2.3.19.tar.gz/lib/kolab_sync_message.php -> kolab-syncroton-2.3.20.tar.gz/lib/kolab_sync_message.php Changed

@@ -193,75 +193,39 @@
         // remove empty headers
         $headers = array_filter($headers);
 
-        // send thru SMTP server using custom SMTP library
-        if ($rcube->config->get('smtp_server')) {
-            $smtp_headers = $headers;
-            // generate list of recipients
-            $recipients = array();
-
-            if (!empty($headers['To']))
-                $recipients[] = $headers['To'];
-            if (!empty($headers['Cc']))
-                $recipients[] = $headers['Cc'];
-            if (!empty($headers['Bcc']))
-                $recipients[] = $headers['Bcc'];
-
-            // remove Bcc header
-            unset($smtp_headers['Bcc']);
-
-            // send message
-            if (!is_object($rcube->smtp)) {
-                $rcube->smtp_init(true);
-            }
+        $smtp_headers = $headers;
 
-            $sent = $rcube->smtp->send_mail($headers['From'], $recipients, $smtp_headers, $this->body, $smtp_opts);
-            $smtp_response = $rcube->smtp->get_response();
-            $smtp_error    = $rcube->smtp->get_error();
+        // generate list of recipients
+        $recipients = array();
 
-            // log error
-            if (!$sent) {
-                rcube::raise_error(array('code' => 800, 'type' => 'smtp',
-                    'line' => __LINE__, 'file' => __FILE__,
-                    'message' => "SMTP error: ".join("\n", $smtp_response)), true, false);
-            }
+        if (!empty($headers['To']))
+            $recipients[] = $headers['To'];
+        if (!empty($headers['Cc']))
+            $recipients[] = $headers['Cc'];
+        if (!empty($headers['Bcc']))
+            $recipients[] = $headers['Bcc'];
+
+        if (empty($headers['To']) && empty($headers['Cc'])) {
+            $headers['To'] = 'undisclosed-recipients:;';
         }
-        // send mail using PHP's mail() function
-        else {
-            $mail_headers = $headers;
-            $delim        = $rcube->config->header_delimiter();
-            $subject      = $headers['Subject'];
-            $to           = $headers['To'];
-
-            // unset some headers because they will be added by the mail() function
-            unset($mail_headers['To'], $mail_headers['Subject']);
-
-            // #1485779
-            if (strtoupper(substr(PHP_OS, 0, 3)) === 'WIN') {
-                if (preg_match_all('/<([^@]+@[^>]+)>/', $to, $m)) {
-                    $to = implode(', ', $m[1]);
-                }
-            }
 
-            foreach ($mail_headers as $header => $header_value) {
-                $mail_headers[$header] = $header . ': ' . $header_value;
-            }
-            $header_str = rtrim(implode("\r\n", $mail_headers));
+        // remove Bcc header
+        unset($smtp_headers['Bcc']);
 
-            if ($delim != "\r\n") {
-                $header_str = str_replace("\r\n", $delim, $header_str);
-                $msg_body   = str_replace("\r\n", $delim, $this->body);
-                $to         = str_replace("\r\n", $delim, $to);
-                $subject    = str_replace("\r\n", $delim, $subject);
-            }
+        // send message
+        if (!is_object($rcube->smtp)) {
+            $rcube->smtp_init(true);
+        }
 
-            if (ini_get('safe_mode')) {
-                $sent = mail($to, $subject, $msg_body, $header_str);
-            }
-            else {
-                $from = rcube_mime::decode_address_list($headers['From'], 1, false, null, true);
-                $from = $from[0];
-                $sent = mail($to, $subject, $msg_body, $header_str, "-f$from");
-            }
+        $sent = $rcube->smtp->send_mail($headers['From'], $recipients, $smtp_headers, $this->body, $smtp_opts);
+        $smtp_response = $rcube->smtp->get_response();
+        $smtp_error    = $rcube->smtp->get_error();
+
+        // log error
+        if (!$sent) {
+            rcube::raise_error(array('code' => 800, 'type' => 'smtp',
+                'line' => __LINE__, 'file' => __FILE__,
+                'message' => "SMTP error: ".join("\n", $smtp_response)), true, false);
         }
 
         if ($sent) {
@@ -270,25 +234,20 @@
             // remove MDN headers after sending
             unset($headers['Return-Receipt-To'], $headers['Disposition-Notification-To']);
 
-            // get all recipients
-            if ($headers['Cc'])
-                $mailto .= ' ' . $headers['Cc'];
-            if ($headers['Bcc'])
-                $mailto .= ' ' . $headers['Bcc'];
-            if (preg_match_all('/<([^@]+@[^>]+)>/', $mailto, $m))
-                $mailto = implode(', ', array_unique($m[1]));
-
             if ($rcube->config->get('smtp_log')) {
-                rcube::write_log('sendmail', sprintf("User %s [%s]; Message for %s; %s",
+                // get all recipient addresses
+                $mailto = rcube_mime::decode_address_list(implode(',', $recipients), null, false, null, true);
+
+                rcube::write_log('sendmail', sprintf("User %s [%s]; Message %s for %s; %s",
                     $rcube->get_user_name(),
-                    $_SERVER['REMOTE_ADDR'],
-                    $mailto,
-                    !empty($smtp_response) ? join('; ', $smtp_response) : ''));
+                    rcube_utils::remote_addr(),
+                    $headers['Message-ID'],
+                    implode(', ', $mailto),
+                    !empty($smtp_response) ? implode('; ', $smtp_response) : '')
+                );
             }
         }
 
-        unset($headers['Bcc']);
-
         $this->headers = $headers;
 
         return $sent;
@@ -327,7 +286,7 @@
         }
 
         // single part
-        $enc = strtolower($hdrs['Content-Transfer-Encoding']);
+        $enc = !empty($hdrs['Content-Transfer-Encoding']) ? strtolower($hdrs['Content-Transfer-Encoding']) : null;
 
         // do nothing if already encoded
         if ($enc != 'quoted-printable' && $enc != 'base64') {

kolab-syncroton-2.3.19.tar.gz/lib/kolab_sync_timezone_converter.php -> kolab-syncroton-2.3.20.tar.gz/lib/kolab_sync_timezone_converter.php Changed

@@ -284,7 +284,7 @@
 
         for ($i=5; $i>0; $i--) {
             if ($this->_isNthOcurrenceOfWeekdayInMonth($transitionDate, $i)) {
-                $_offsets[$_type . 'Day'] = $i;
+                $_offsets[$_type . 'Week'] = $i;
                 break;
             };
         }
@@ -351,7 +351,7 @@
         $standardOffset = ($_offsets['bias'] + $_offsets['standardBias']) * 60 * -1;
 
         // check each condition in a single if statement and break the chain when one condition is not met - for performance reasons
-        if ($standardOffset == $_standardTransition['offset'] ) {
+        if ($standardOffset == $_standardTransition['offset']) {
 
             if (empty($_offsets['daylightMonth']) && (empty($_daylightTransition) || empty($_daylightTransition['isdst']))) {
                 // No DST
@@ -363,17 +363,24 @@
             // the milestone is sending a positive value for daylightBias while it should send a negative value
             $daylightOffsetMilestone = ($_offsets['bias'] + ($_offsets['daylightBias'] * -1) ) * 60 * -1;
 
-            if ($daylightOffset == $_daylightTransition['offset'] || $daylightOffsetMilestone == $_daylightTransition['offset']) {
-                $standardDate = new DateTime($_standardTransition['time'], $tz);
-                $daylightDate = new DateTime($_daylightTransition['time'], $tz);
+            if (
+                !empty($_daylightTransition)
+                && ($daylightOffset == $_daylightTransition['offset'] || $daylightOffsetMilestone == $_daylightTransition['offset'])
+            ) {
+                // date-time input here contains UTC timezone specifier (+0000),
+                // we have to convert the date to the requested timezone afterwards.
+                $standardDate = new DateTime($_standardTransition['time']);
+                $daylightDate = new DateTime($_daylightTransition['time']);
+                $standardDate->setTimezone($tz);
+                $daylightDate->setTimezone($tz);
 
                 if ($standardDate->format('n') == $_offsets['standardMonth'] &&
                     $daylightDate->format('n') == $_offsets['daylightMonth'] &&
                     $standardDate->format('w') == $_offsets['standardDayOfWeek'] &&
                     $daylightDate->format('w') == $_offsets['daylightDayOfWeek']
                 ) {
-                    return $this->_isNthOcurrenceOfWeekdayInMonth($daylightDate, $_offsets['daylightDay']) &&
-                           $this->_isNthOcurrenceOfWeekdayInMonth($standardDate, $_offsets['standardDay']);
+                    return $this->_isNthOcurrenceOfWeekdayInMonth($daylightDate, $_offsets['daylightWeek']) &&
+                           $this->_isNthOcurrenceOfWeekdayInMonth($standardDate, $_offsets['standardWeek']);
                 }
             }
         }
@@ -389,10 +396,20 @@
      */
     protected function _unpackTimezoneInfo($_packedTimezoneInfo)
     {
-        $timezoneUnpackString = 'lbias/a64standardName/vstandardYear/vstandardMonth/vstandardDayOfWeek/vstandardDay/vstandardHour/vstandardMinute/vstandardSecond/vstandardMilliseconds/lstandardBias/a64daylightName/vdaylightYear/vdaylightMonth/vdaylightDayOfWeek/vdaylightDay/vdaylightHour/vdaylightMinute/vdaylightSecond/vdaylightMilliseconds/ldaylightBias';
+        $timezoneUnpackString = 'lbias/a64standardName/vstandardYear/vstandardMonth/vstandardDayOfWeek/vstandardWeek/vstandardHour/vstandardMinute/vstandardSecond/vstandardMilliseconds/lstandardBias'
+            . '/a64daylightName/vdaylightYear/vdaylightMonth/vdaylightDayOfWeek/vdaylightWeek/vdaylightHour/vdaylightMinute/vdaylightSecond/vdaylightMilliseconds/ldaylightBias';
 
         $timezoneInfo = unpack($timezoneUnpackString, base64_decode($_packedTimezoneInfo));
 
+        if ($timezoneInfo['standardHour'] == 23 && $timezoneInfo['standardMilliseconds'] == 999
+            && $timezoneInfo['standardMinute'] == 59 && $timezoneInfo['standardSecond'] == 59
+        ) {
+            $timezoneInfo['standardHour'] = 24;
+            $timezoneInfo['standardMinute'] = 0;
+            $timezoneInfo['standardSecond'] = 0;
+            $timezoneInfo['standardMilliseconds'] = 0;
+        }
+
         return $timezoneInfo;
     }
 
@@ -408,6 +425,16 @@
             return null;
         }
 
+        // According to e.g. https://docs.microsoft.com/en-us/windows/win32/api/minwinbase/ns-minwinbase-systemtime,
+        // 24 is not allowed in the Hour field, and consequently Outlook can't deal with it.
+        // This is the same workaround that Outlook applies.
+        if ($_timezoneInfo['standardHour'] == 24) {
+            $_timezoneInfo['standardHour'] = 23;
+            $_timezoneInfo['standardMinute'] = 59;
+            $_timezoneInfo['standardSecond'] = 59;
+            $_timezoneInfo['standardMilliseconds'] = 999;
+        }
+
         $packed = pack(
             "la64vvvvvvvvla64vvvvvvvvl",
             $_timezoneInfo['bias'],
@@ -415,7 +442,7 @@
             $_timezoneInfo['standardYear'],
             $_timezoneInfo['standardMonth'],
             $_timezoneInfo['standardDayOfWeek'],
-            $_timezoneInfo['standardDay'],
+            $_timezoneInfo['standardWeek'],
             $_timezoneInfo['standardHour'],
             $_timezoneInfo['standardMinute'],
             $_timezoneInfo['standardSecond'],
@@ -425,7 +452,7 @@
             $_timezoneInfo['daylightYear'],
             $_timezoneInfo['daylightMonth'],
             $_timezoneInfo['daylightDayOfWeek'],
-            $_timezoneInfo['daylightDay'],
+            $_timezoneInfo['daylightWeek'],
             $_timezoneInfo['daylightHour'],
             $_timezoneInfo['daylightMinute'],
             $_timezoneInfo['daylightSecond'],
@@ -452,7 +479,7 @@
             'standardYear'      => 0,
             'standardMonth'     => 0,
             'standardDayOfWeek' => 0,
-            'standardDay'       => 0,
+            'standardWeek'      => 0,
             'standardHour'      => 0,
             'standardMinute'    => 0,
             'standardSecond'    => 0,
@@ -462,7 +489,7 @@
             'daylightYear'      => 0,
             'daylightMonth'     => 0,
             'daylightDayOfWeek' => 0,
-            'daylightDay'       => 0,
+            'daylightWeek'      => 0,
             'daylightHour'      => 0,
             'daylightMinute'    => 0,
             'daylightSecond'    => 0,
@@ -481,8 +508,8 @@
     protected function _validateOffsets($value)
     {
         // validate $value
-        if ((!empty($value['standardMonth']) || !empty($value['standardDay']) || !empty($value['daylightMonth']) || !empty($value['daylightDay'])) &&
-            (empty($value['standardMonth']) || empty($value['standardDay']) || empty($value['daylightMonth']) || empty($value['daylightDay']))
+        if ((!empty($value['standardMonth']) || !empty($value['standardWeek']) || !empty($value['daylightMonth']) || !empty($value['daylightWeek'])) &&
+            (empty($value['standardMonth']) || empty($value['standardWeek']) || empty($value['daylightMonth']) || empty($value['daylightWeek']))
         ) {
             // It is not possible not set standard offsets without setting daylight offsets and vice versa
             return false;
@@ -617,7 +644,7 @@
 
     protected function _loadFromCache($key)
     {
-        if ($cache = $this->getCache) {
+        if ($cache = $this->getCache()) {
             return $cache->get($key);
         }
 
@@ -626,7 +653,7 @@
 
     protected function _saveInCache($value, $key)
     {
-        if ($cache = $this->getCache) {
+        if ($cache = $this->getCache()) {
             $cache->set($key, $value);
         }
     }

kolab-syncroton-2.3.19.tar.gz/tests/body_converter.php -> kolab-syncroton-2.3.20.tar.gz/tests/body_converter.php Changed

kolab-syncroton-2.3.19.tar.gz/tests/data.php -> kolab-syncroton-2.3.20.tar.gz/tests/data.php Changed

kolab-syncroton-2.3.19.tar.gz/tests/data_calendar.php -> kolab-syncroton-2.3.20.tar.gz/tests/data_calendar.php Changed

kolab-syncroton-2.3.19.tar.gz/tests/data_tasks.php -> kolab-syncroton-2.3.20.tar.gz/tests/data_tasks.php Changed

kolab-syncroton-2.3.19.tar.gz/tests/message.php -> kolab-syncroton-2.3.20.tar.gz/tests/message.php Changed

kolab-syncroton-2.3.19.tar.gz/tests/timezone_converter.php -> kolab-syncroton-2.3.20.tar.gz/tests/timezone_converter.php Changed

@@ -1,6 +1,6 @@
 <?php
 
-class timezone_converter extends PHPUnit_Framework_TestCase
+class timezone_converter extends PHPUnit\Framework\TestCase
 {
     function setUp()
     {
@@ -9,14 +9,13 @@
 
     function test_list_timezones()
     {
-        date_default_timezone_set('America/Los_Angeles');
+//        date_default_timezone_set('America/Los_Angeles');
 
         $converter = timezone_converter_test::getInstance();
-
-        $input  = 'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAoAAAAEAAIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAMAAAAFAAEAAAAAAAAAxP///w==';
-        $output = $converter->getListOfTimezones($input);
+        $output = $converter->getListOfTimezones('AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAoAAAAEAAIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAMAAAAFAAEAAAAAAAAAxP///w==');
 
         $this->assertTrue(is_array($output));
+        $this->assertSame(array(), $output);
 
         $converter = timezone_converter_test::getInstance();
         $output    = $converter->getListOfTimezones('xP///0MAZQBuAHQAcgBhAGwAIABFAHUAcgBvAHAAZQAgAFMAdABhAG4AZABhAHIAZAAgAFQAaQBtAGUAAAAAAAAAAAAAAAoAAAAFAAMAAAAAAAAAAAAAAEMAZQBuAHQAcgBhAGwAIABFAHUAcgBvAHAAZQAgAEQAYQB5AGwAaQBnAGgAdAAgAFQAaQBtAGUAAAAAAAAAAAAAAAMAAAAFAAIAAAAAAAAAxP///w==');
@@ -29,6 +28,12 @@
 
         $this->assertTrue(is_array($output));
         $this->assertTrue(isset($output['America/Los_Angeles']));
+
+        $converter = timezone_converter_test::getInstance();
+        $output = $converter->getListOfTimezones('Lv///0kAcgBhAG4AIABTAHQAYQBuAGQAYQByAGQAIABUAGkAbQBlAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAkAAgADABcAOwA7AOcDAAAAAEkAcgBhAG4AIABEAGEAeQBsAGkAZwBoAHQAIABUAGkAbQBlAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAMAAQAEAAAAAAAAAAAAxP///w==');
+
+        $this->assertTrue(is_array($output));
+        $this->assertTrue(isset($output['Asia/Tehran']));
     }
 
     function test_get_timezone()
@@ -73,11 +78,11 @@
 
         $this->assertSame($output['standardBias'], 0);
         $this->assertSame($output['standardMonth'], 10);
-        $this->assertSame($output['standardDay'], 5);
+        $this->assertSame($output['standardWeek'], 5);
         $this->assertSame($output['standardHour'], 3);
         $this->assertSame($output['daylightBias'], -60);
         $this->assertSame($output['daylightMonth'], 3);
-        $this->assertSame($output['daylightDay'], 5);
+        $this->assertSame($output['daylightWeek'], 5);
         $this->assertSame($output['daylightHour'], 2);
 
         $output = $converter->getOffsetsForTimezone('America/Los_Angeles', $datetime);
@@ -85,11 +90,11 @@
         $this->assertSame($output['bias'], 480);
         $this->assertSame($output['standardBias'], 0);
         $this->assertSame($output['standardMonth'], 11);
-        $this->assertSame($output['standardDay'], 1);
+        $this->assertSame($output['standardWeek'], 1);
         $this->assertSame($output['standardHour'], 2);
         $this->assertSame($output['daylightBias'], -60);
         $this->assertSame($output['daylightMonth'], 3);
-        $this->assertSame($output['daylightDay'], 2);
+        $this->assertSame($output['daylightWeek'], 2);
         $this->assertSame($output['daylightHour'], 2);
 
         $output = $converter->getOffsetsForTimezone('Atlantic/Azores', $datetime);
@@ -97,13 +102,53 @@
         $this->assertSame($output['bias'], 60);
         $this->assertSame($output['standardBias'], 0);
         $this->assertSame($output['standardMonth'], 10);
-        $this->assertSame($output['standardDay'], 5);
+        $this->assertSame($output['standardWeek'], 5);
         $this->assertSame($output['standardHour'], 1);
         $this->assertSame($output['daylightBias'], -60);
         $this->assertSame($output['daylightMonth'], 3);
-        $this->assertSame($output['daylightDay'], 5);
+        $this->assertSame($output['daylightWeek'], 5);
+        $this->assertSame($output['daylightHour'], 0);
+
+        $output = $converter->getOffsetsForTimezone('Asia/Tehran', $datetime);
+
+        $this->assertSame($output['bias'], -210);
+        $this->assertSame($output['standardBias'], 0);
+        $this->assertSame($output['standardMonth'], 9);
+        $this->assertSame($output['standardWeek'], 3);
+        $this->assertSame($output['standardDayOfWeek'], 2);
+        $this->assertSame($output['standardHour'], 24);
+        $this->assertSame($output['daylightBias'], -60);
+        $this->assertSame($output['daylightMonth'], 3);
+        $this->assertSame($output['daylightWeek'], 4);
+        $this->assertSame($output['daylightDayOfWeek'], 1);
         $this->assertSame($output['daylightHour'], 0);
     }
+
+    function data_timezone_conversion()
+    {
+        return array(
+            array('Asia/Tehran', 'Lv///wAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAkAAgADABcAOwA7AOcDAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAMAAQAEAAAAAAAAAAAAxP///w=='),
+            array('Pacific/Pago_Pago', 'lAIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=='),
+            array('Europe/Warsaw', 'xP///wAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAoAAAAFAAMAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAMAAAAFAAIAAAAAAAAAxP///w=='),
+        );
+    }
+
+    /**
+     * @dataProvider data_timezone_conversion
+     */
+    function test_timezone_conversion($tz, $expected)
+    {
+        $datetime  = new DateTime('2021-07-01T12:00:00Z');
+        $converter = timezone_converter_test::getInstance();
+        $output = $converter->encodeTimezone($tz, $datetime);
+
+        $this->assertSame($expected, $output);
+
+        $output = $converter->getListOfTimezones($output);
+
+        $this->assertTrue(is_array($output));
+        $this->assertTrue(isset($output[$tz]));
+    }
 }
 
 class timezone_converter_test extends kolab_sync_timezone_converter

kolab-syncroton.dsc Changed

plesk.kolab_syncroton.inc.php Changed

Changes of Revision 40