Kolab Groupware OBS

Changes of Revision 96

pykolab.spec Changed

pykolab-0.7.tar.gz/.gitignore Added

pykolab-0.7.tar.gz/.tx Added

pykolab-0.7.tar.gz/.tx/config Added

pykolab-0.7.tar.gz/ChangeLog Deleted

@@ -1,6087 +0,0 @@
-commit c297111746bd1fca73a9049971a8106f3be4fa16
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jan 15 16:25:19 2014 +0100
-
-    Prep for 0.5.17
-
-commit e60ec6ab05f15539f720fbbe068435d5f57883ac
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jan 15 16:25:03 2014 +0100
-
-    Circumvent decoding errors in log messages from causing authentication to fail
-
-commit 42d98f8722d288950518f2b1f21dd1f635795c39
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jan 14 13:26:20 2014 +0100
-
-    Add a configuration option to disable the application of the recipient policy by the kolabd daemon -- so the web administration panel can continue to suggest a generated value but allow read/write access to the attribute in its form(s).
-    
-    Conflicts:
-    	conf/kolab.conf
-
-commit f754519d2a58eab829184c460be6b42df4eb4268
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jan 14 13:20:22 2014 +0100
-
-    .lower() both the mailserver_attribute as well as the result_attribute
-
-commit 22035823051733b2a5f74b10610139ceaadde421
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jan 14 13:18:12 2014 +0100
-
-    Verbose logging about the tests we execute to see if a user needs to be subscribed to a particular (additional) folder.
-    Attempt to subscribe, but fail without a traceback should subscribing not succeed.
-    Verbose logging on the server address found for a mailbox, for the purpose of troubleshooting deployments that exploit case-sensitivity of server addresses.
-    
-    Conflicts:
-    	pykolab/imap/__init__.py
-
-commit e771aa6abbc258c13772211028dcdf525cab4ba9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jan 14 13:02:33 2014 +0100
-
-    Entry Change Notifications of type None (such as during the initial synchronization using persistent search) may still have a mail server attribute value on their entry.
-
-commit 7f579ade3fd1607eecb113228d8636aa91da58a1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Nov 25 17:33:49 2013 +0100
-
-    Release 0.5.16
-
-commit 8f4f8d31e99a5e983130bbc02df7a918502f5de2
-Author: Aleksander Machniak <machniak@kolabsys.com>
-Date:   Mon Nov 25 17:00:03 2013 +0100
-
-    Address #1627 once and for all, by simply not encoding / decoding the message but instead insert the envelope headers
-    
-    Conflicts:
-    	wallace/module_footer.py
-
-commit ce6a2744df9d0c408d7747bfbcd6f48a47824f40
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 23 12:53:24 2013 +0200
-
-    Bump release to 0.5.15
-
-commit e1c7a521dcedb61135be23ed37bbfe762812f4a4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 23 12:51:48 2013 +0200
-
-    Add the supported_controls setting to the [ldap] section
-
-commit 4e0f2935fbd85e7ba235d2f10a5dedefac066856
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 18 14:36:10 2013 +0100
-
-    Avoid duplicating the search for a domain root dn / domain connection
-
-commit 141606a63cb6561e548a4839b998c2103b145377
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Sep 20 15:03:08 2013 +0100
-
-    Increase the efficiency of three frequently used queries:
-    
-      - The search for recipients does not have to include the nsuniqueid attribute,
-      - Not all domains list have to include all domains,
-      - There's no need to search for supported controls if we already know what controls are supported.
-
-commit 468557e3799b647c3b444ff7c7f8eac07fa55c18
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 31 20:25:04 2013 +0100
-
-    Catch LDAP errors
-
-commit fa65938b3b1e8efac5a01987fce44eae20a1079c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 9 14:49:04 2013 +0100
-
-    Make sure events hold the required X-Kolab-MIME-Version: 3.0 header
-
-commit 84f8fc974e7847ab325fbefa40041d97fe5cc216
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Jul 6 11:06:48 2013 +0100
-
-    Use utf-7 names when deleting folders by wildcard match as well
-
-commit a35735afa63e61fd49d7cc80f0001988414edbaa
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 5 21:48:22 2013 +0100
-
-    0.5.14
-
-commit 3491b74df4ef6010f2f3df223ca2c3d421cb3d51
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 5 20:22:33 2013 +0100
-
-    Fix the utf7 backend versus preferred utf8 display
-
-commit 6ffd3d291d73e778338525c48ba2572d5b4f969a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 5 19:50:38 2013 +0100
-
-    Make sure the pattern for deleting mailboxes is passed on right between various function calls
-
-commit 26a08fdcc8746650e279770ecf52077d96a0821f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 5 19:38:56 2013 +0100
-
-    If a string isn't unicode, attempt to make it so
-
-commit ae26c04fefaf11e16601348099952b90bdf5bfc8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 5 19:38:34 2013 +0100
-
-    Decode the mailbox names in kolab list-mailboxes
-
-commit f654d9d51a245a6fc3f6b0ff5412f442cbe8c99a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 5 19:26:32 2013 +0100
-
-    Use imap.create_folder() for kolab cm
-
-commit cac4578a364762b7b3240acc1e04f23c14d02ade
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 5 18:08:52 2013 +0100
-
-    pykolab 0.5.13
-
-commit 67813db2f3fce7ae37c763fd1baf64f38a1709c8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 5 18:07:48 2013 +0100
-
-    Correct IMAP not being loaded / initialized
-
-commit 64196a670ccd3efbbf968d64a7b6fce00b8c5bdf
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 5 18:06:16 2013 +0100
-
-    Correct the resulting message in message_from_string not detecting the message is multipart
-
-commit 9c5a9c6d076317b4ab12a8c7da0a44984bf65dd1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 5 18:03:08 2013 +0100
-
-    Correct conversion to utf7
-
-commit db06665be4e8356208c975b87fb1f6750a1e842f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 5 17:09:53 2013 +0100
-
-    Make sure folder names are utf-7 encoded
-    
-    Conflicts:
-    	pykolab/imap/__init__.py
-
-commit 481936527f5f65a80e83c4807b79c7a1c0f272bf
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jun 3 12:01:09 2013 +0100
-
-    Prevent search access from allowing users to read userpassword attributes
-
-commit 38023876abbdb0dcea25d56c8e3e6277ec13f80a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 22 13:50:41 2013 +0200
-
-    Only obtain the value of the cache_entry if the entry supplied in the callback does not already have a result attribute value
-
-commit 93e28ab95f665c0e484de306b10bd9b11099b387
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 22 13:28:46 2013 +0200
-
-    Remove erroneous print statement
-
-commit ad600c78ea858f600055dd24cece64a3440e0dea
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 22 13:27:06 2013 +0200
-
-    Correct parsing folder names with spaces (#1887)
-
-commit 70d9da4a57441a752fa0a8098aca345f91e6d3c6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 22 13:15:15 2013 +0200
-
-    Upon deletion of an entry, see if we can get to the value of the result attribute using our cache
-
-commit 2ea1d290988ca83ff9947ea942a8a4e033e51020
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 22 13:10:14 2013 +0200
-
-    Make sure we ship the value of the unique attribute back to the callback (#1875)
-
-commit 9b34909c840fef0f8c2c1c5f0faf25c6a4692b73
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 22 11:47:09 2013 +0200
-
-    Catch a case in which the list of domain name spaces is empty
-
-commit 44080e6e10733d80dc9a5bf230eabf54083f7b90
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 19 11:03:41 2013 +0100
-
-    Disable kolab_core plugin
-
-commit 215d28353283f28df684ca828adac7d4037e19cf
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 17 10:03:25 2013 +0200
-
-    Bump release
-
-commit f9598d9d10360699f9c295ec6febe4d005663721
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 16 20:43:18 2013 +0200
-
-    pykolab/utils really cannot deal with a list of primary mail attribute values
-
-commit a57e486f5739b4b374e428d43497909ad91fba2a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 16 20:42:57 2013 +0200
-
-    Catch the cases where a recipient policy fails
-
-commit 4f71ab2bb9587fca701cf5147ba5bdef1626b0b6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 16 20:42:17 2013 +0200
-
-    Be a little more verbose about what exactly goes wrong when we catch the exception
-
-commit 944a395dc2f00cca7e47b506b7c1224657ccc557
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 16 20:00:37 2013 +0200
-
-    Return user_attrs['mail'], which exists, while mail is not set
-
-commit 3a209a1668221e4e2cba904e26eee991a3bf021a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 16 19:44:43 2013 +0200
-
-    Make sure a non-existent result attribute value does not result in an attempt to create a mailbox
-
-commit ff1aa0f1e2fa7cd7c33eb5d7f046f548da9e69da
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 16 19:41:29 2013 +0200
-
-    Make sure a failing recipient policy does not result in a blocked process (#1878)
-
-commit 9877c353bb00d9a1eeae7bafe51c727836a0d921
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 16 19:47:50 2013 +0200
-
-    Return if the entry result attribute is empty or does not exist
-
-commit 4e8e861f36982644397f67e0f08f62cb3e63623d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 6 14:52:04 2013 +0100
-
-    Release 0.5.12
-
-commit 256c6a4f69b6799a94c10721e12927b4a7e9334b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 6 14:51:50 2013 +0100
-
-    Remove templates we are not using anymore
-
-commit 1ae33d76b8eaea3509d04fda08b05c4c7c757588
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 30 16:42:44 2013 +0100
-
-    These files can go too
-
-commit f804fb79958caea1c1bc13585b76608e0cca398d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 30 16:41:35 2013 +0100
-
-    Supply setup-kolab routines for the new kolab-freebusy service
-
-commit 0f2f1537e9721bf16e5f16248f7db343b22068c7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 29 15:43:33 2013 +0200
-
-    Add a note on the possible value of this Active Directory unique_attribute
-
-commit 507515dd994483b997a49dc0208680108f560510
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 29 15:30:39 2013 +0200
-
-    Handle objectSid binary blobs to be a unique_attribute attribute name
-
-commit 6a7a997f1984dca045113aed4995606ce1b128ec
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 29 13:59:44 2013 +0200
-
-    Add the new setting [kolab] sync_interval to the default configuration
-
-commit f4915013da5d4846f76a81933e8a54f5e55a811a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 29 13:49:41 2013 +0200
-
-    If the entry_dn is None, we are chasing referrals - which we do not want.
-
-commit fb7b5d11817333abffea4d484d58bad722c75396
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 29 13:48:44 2013 +0200
-
-    Try using one supported control, and abort the entire synchronization if it succeeds. If the configured control does not succeed, try the next supported control
-
-commit 8b001c078ce6aa241c69a2dae517885d9c635ff8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 29 13:39:26 2013 +0200
-
-    Add a timestamp format modifier, for the purpose of further integration with Active Directory, that uses a .0Z addition to the modifytimestamp.
-
-commit f2879dafdd531c6182404b8b38bedf2ffd0d9025
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 29 13:34:17 2013 +0200
-
-    Add a [kolab] section setting 'sync_interval', used as the interval between authn/authz synchronization calls.
-    
-    Synchronization would otherwise continue to occur with paged searches, or vlv searches, immediately after finishing a run.
-
-commit f4f0f44e570b6e95a6c98d308c8e17773f1d811e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 4 13:46:37 2013 +0100
-
-    Fix metadata parsing
-
-commit 9899cbee690d29e6ed8b9ffb9b0161625dd1e0e2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 3 14:34:58 2013 +0200
-
-    Disconnect from the authn/authz database after closing the client connection
-
-commit 4275f237a86d32880569c8cd65c15565dde6130f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 4 13:36:34 2013 +0100
-
-    Apply diff for #1627, #1631 (non-ascii characters cause wallace tracebacks)
-
-commit 837bf4fe7a6d2b33feae8bf463c866b936766892
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Feb 6 18:22:33 2013 +0000
-
-    Ensure that when new aliases are being compared to the old ones, the lists are compared in a sorted, list-over-set manner. (#1560)
-
-commit 5038a508e6af07f1bf7a55f95e877d84cf8568c9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jan 30 14:31:52 2013 +0000
-
-    Ensure an attribute obtained is case-insensitive when we look it up
-
-commit d68c3703b65b097f185a1e641efa0bc0dc010982
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jan 10 16:49:34 2013 +0100
-
-    Make sure we transliterate the components before we push them in to a policy (#1508)
-
-commit 92f86d192411962c44e5c88338d314f9d35903e8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jan 10 16:47:22 2013 +0100
-
-    Add debug statements for transliteration using pykolab.utils.translate(), so we can work out bugs such as #1508 and #1536
-
-commit f0119b59ec6e2cd98669908295d188273584d540
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jan 10 12:12:16 2013 +0000
-
-    Add kolab_use_subscriptions setting to configuration template
-    
-    Conflicts:
-    	share/templates/roundcubemail/kolab.inc.php.tpl
-
-commit 261cb5309273e2ce240bd17954af7012b5b43670
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jan 9 14:03:35 2013 +0000
-
-    Bump version number
-
-commit c13045e4e2b8ba594c4b8c806aa4f22267585732
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jan 9 13:59:29 2013 +0000
-
-    Make sure the sasl_username is realmed, or we run in to server configuration problem errors
-
-commit 7099803125af47ce2ddaf1da4159d1930a2eabf3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Dec 26 17:26:00 2012 +0100
-
-    Continuously loop through the synchronization, sleeping 1 second each run - except when a keyboard interrupt is issued
-
-commit 8c726c54842e69426eb6d689ea6317eef91af61c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Dec 26 16:24:46 2012 +0100
-
-    Take in to account a _change_none_user can still require a mailbox rename
-
-commit 7404e83d8c639db6948321dafaf5341972c476af
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Dec 26 14:39:24 2012 +0100
-
-    Apply the recipient policy to entries with existing attributes as well (so mailboxes get renamed and such).
-
-commit d6a9544b3c594daa8756fa4b71d38ef970e792cf
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 28 18:12:58 2012 +0000
-
-    Use our set_metadata() call on IMAP.
-
-commit dce9ec73738756d0667647e309966e1728620167
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 4 15:13:44 2012 +0000
-
-    Allow the caller to cache.get_entry() to specify the entry should not be updated automatically
-
-commit a7a074685fa4cb03d4e1dffde399459dd847409a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 30 12:01:17 2012 +0000
-
-    Use cache, not conf.changelog
-    Use a ReconnectLDAPObject rather than a SimpleLDAPObject
-
-commit 7777262894cf4d1e5ef72eeb69cd9f3dacc89dc6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 30 12:00:04 2012 +0000
-
-    try/except synchronizing and gracefully exit if something goes wrong. The master kolabd process will restart synchronization
-
-commit bce3066e540a8c1c2e22b875dc77c8d20741b254
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 30 11:59:30 2012 +0000
-
-    Check if a domain name space synchronization process is still alive
-    try/except removing our PID file
-
-commit 0751de3ff518aaac94bc96f17ee90b4fa2b42604
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 25 11:57:27 2012 +0100
-
-    Set version to 0.5.10
-
-commit 94059e70dcbc7b78bf5b3d217227d11db06b924a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Dec 24 17:14:42 2012 +0100
-
-    Use the original SMTP communication exchange for recipients and senders (#1469)
-
-commit 7368cb82c46b8636a89646879fed86c7bc9adf7c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Dec 24 17:13:43 2012 +0100
-
-    Adjust the resources module to match the new format in which files are written to the spool (#1469)
-
-commit cfebb760d664f1f6013d679d2c311fb069c49061
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Dec 24 17:11:54 2012 +0100
-
-    Write out messages received to the spool as a JSON object that preserves the SMTP communication exchange (#1469)
-
-commit 9fef3d45ba11645ecf5cb8bc9d8feaac09cfdc8b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Dec 21 18:15:40 2012 +0100
-
-    Bump release
-
-commit c0036ddc4fc497833544ed0f38320337dd40dee6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Dec 21 18:15:01 2012 +0100
-
-    Fix error in if clause logic
-
-commit 64853f89bbbe355cc973ada573d3039bc46a6a46
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Dec 20 16:49:08 2012 +0100
-
-    Actually require python-sqlalchemy
-
-commit 89e9bfc50bfa142865f7dc701eeb3b5268f4802d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Dec 20 16:47:21 2012 +0100
-
-    Set version number to 0.5.9
-
-commit cc35e6e43844dd5d95ae7ab9c458ae78d57cf2fb
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Dec 20 16:35:41 2012 +0100
-
-    Find a Kolab LDAP schema extensions file starting with kolab and ending with '.ldif' so that it does not actually matter whether kolab2.ldif or kolab3.ldif is installed. (#1487)
-    Log an error if the schema file for LDAP schema extensions for Kolab cannot be found, or cannot be copied. (#1487)
-    Append the ACI for kolab extensions only when the schema is actually successfully inserted. (#1487)
-
-commit 8bfceded5c9d758fb590b7ebe218a19eaa192769
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Dec 19 14:47:16 2012 +0100
-
-    Use the ldap server configured in /etc/kolab/kolab.conf (#1475)
-
-commit 0d7e29bd4eeeed088cd8abcb78fdc730b949e5bf
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Dec 19 14:45:26 2012 +0100
-
-    Adjust utils.parse_ldap_uri()
-
-commit 481f8a17dfc69de4c50bd6eb3013a324481401b2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Dec 19 14:20:42 2012 +0100
-
-    Retrieve the /shared/vendor/cyrus-imapd/server annotation
-
-commit 6d13a81036557b0f02417f982b3879bd88c51602
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Dec 17 13:18:46 2012 +0000
-
-    Add objectclass inetdomain for custom inetdomainbasedn attribute (#1473)
-
-commit f71ed484027704e075a28c882a3b7cdeba846845
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 11 13:16:27 2012 +0000
-
-    Lower-case the mailbox name for user mailboxes (#1455)
-
-commit a762de521545cc92b9236f90a785d755f46c63ce
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 30 13:33:14 2012 +0000
-
-    Bump release
-
-commit d8149edc769603e0a14bfe062c56f06c9fddf742
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 30 13:32:35 2012 +0000
-
-    Correct whether or not to set the TLS certificates on RPM-based distributions
-
-commit b203f164504a9901242260ad36fb08ec951c2dec
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Nov 29 13:11:54 2012 +0000
-
-    Correct indentation and correct smtp sasl configuration
-
-commit 136307d7ceafab24f317ebe4b2721176c998bae7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Nov 29 12:23:18 2012 +0000
-
-    Do not change the tls settings for debian at all
-
-commit 87bc6b242461ff64b3b505ca0242755133c9f4cb
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Nov 29 12:14:18 2012 +0000
-
-    Correct the configuration of the path to the certificate file to use for SSL/TLS (#1397)
-
-commit 6d473681548dbc1f809fc439d23c29ff71292a79
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Nov 29 11:57:21 2012 +0000
-
-    Substitute the path to the Kolab SMTP Access Policy executable for the correct value (#1396)
-
-commit 16ad884b279d01b5c0a3cac9cc876790d5b90211
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Nov 26 14:42:15 2012 +0000
-
-    Release 0.5.8-2
-
-commit 8dd1e8a6be67f95338e7b9dcf752bdb9a349fdc8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Nov 25 14:03:49 2012 +0000
-
-    Disable and shut down saslauthd before starting kolab-saslauthd
-
-commit 1ea303d92a99011ad67552769c479134c3e66e67
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Nov 25 13:21:44 2012 +0000
-
-    Import os before using it
-
-commit 96f3ff3e3d315980d3f36f5a622f15377e6bdefc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Nov 25 12:38:44 2012 +0000
-
-    Move unlinking /tmp/kolab-setup-my.cnf from components to upper-level run call
-
-commit 06627fd5289e9118e09559a2bebcd76113bd6cec
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Nov 25 12:48:00 2012 +0000
-
-    Remove the use of log from utils
-
-commit e33da72dd28c298d121c8c683947c62523d52db2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Nov 25 10:58:44 2012 +0000
-
-    Set version to 0.5.8
-
-commit 6b3a01e6434c5b58648793581f1c7e190179ed82
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Nov 25 10:44:47 2012 +0000
-
-    Correct path to wallace tmpfiles.d
-
-commit c07aa3ae7e29362fb81e9d3e08a2b7a8db0e8a28
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Nov 25 10:33:04 2012 +0000
-
-    Remove ChangeLog from source code management
-
-commit d34b78e81b102e753e6f65aeea50251937db493a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Nov 25 10:32:01 2012 +0000
-
-    Really only ask the question what MySQL we are setting up if /var/run/mysqld/mysqld.sock exists
-
-commit fd70b4189dd23af78cd43b08e55a581318f0ed7c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Nov 25 10:31:33 2012 +0000
-
-    Require pyasn1{,-modules} for tests
-
-commit d95ce1f1eab6574a3285e938153128b1ffec817c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Nov 25 10:31:25 2012 +0000
-
-    Include tmpfiles.d in dist tarball
-
-commit 8a2710a744ed73ad0c7d2c02a725f9dd9fd4cde6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Nov 25 10:31:02 2012 +0000
-
-    Include tmpfiles.d in dist tarball
-
-commit 2dc7ba51c66cd90d0f5248a44c4a0fce36aa003e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 23 17:10:11 2012 +0000
-
-    Set version to 0.5.7
-
-commit 665a63e301135eda680f8904c7d211aef96284dc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Nov 22 09:29:54 2012 +0000
-
-    Provide a mechanism to select a process in which an existing MySQL server is used (#1177)
-
-commit 1c1639f08e1ead98a39de35459c448d232ba1c05
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Nov 22 08:59:13 2012 +0000
-
-    Remove /tmp/kolab-setup-my.cnf after setup, and chmod it 0600 before writing out anything relevant.
-
-commit d9092312a66776a4480c11f63f6559c5c934d428
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 21 13:50:29 2012 +0000
-
-    Add an option --user to allow list-mailbox-metadata and set-mailbox-metadata to be performed on behalf of the user (thus includes private annotations)
-
-commit bae001371d7af80a1c1a432cb4f7111fcd9d6348
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Nov 20 14:18:19 2012 +0000
-
-    Ignore *.orig and *.rej
-
-commit 0e813970edc8e2c92ace7076db24a1ce8a0386f2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 21 13:47:37 2012 +0000
-
-    Restart the Kolab SASL Authentication daemon before restarting the Cyrus IMAP daemon
-
-commit 45ef0a03924aa756075a92a6f0ce15c1f0ca8bff
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 21 10:13:11 2012 +0000
-
-    Ensure the mailbox name is lower-cased upon creation
-
-commit c5fccafe358a47029a074dae2c64987fa633b234
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Nov 20 14:17:13 2012 +0000
-
-    import sys (#1317)
-
-commit 51adf1dc6680802eda24bd077f314ee60c7c96b2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Nov 13 12:25:55 2012 +0000
-
-    pop the correctly indexed argument off the list
-
-commit ce7282b78e4784faff9fb4df2a5ebe3077915db6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Nov 12 12:10:45 2012 +0000
-
-    No looking at conf.cli_args for command components anymore
-
-commit 32c5a63c26e625cbcbddc54ea59042bb44a2579b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Nov 12 12:10:26 2012 +0000
-
-    Eject the cli components from sys.argv
-
-commit 62559e19643cfeccc1088a30b652b462bbf7b405
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Nov 10 17:03:32 2012 +0000
-
-    Supply your very basic "does this value represent True or False?" function
-
-commit 8ce72466d98609702d33c7dfa257e9dc384009ed
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Nov 10 17:02:40 2012 +0000
-
-    Allow a grouped command to be executed like so:
-    
-      $ kolab sieve list
-
-commit adb0fdbb232381df04303681b1474c501c2354af
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Nov 10 16:26:03 2012 +0000
-
-    Display help if an unknown command is specified (and do not bail out on --help).
-    Fix typo
-
-commit 62b1fc94377f6ff303d51d18974bf088460412e4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Nov 10 16:24:32 2012 +0000
-
-    Exclude group commands from the upper-level list of commands.
-
-commit f171957f373c1dc316389f99635145135f58369b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Nov 10 16:23:32 2012 +0000
-
-    Fix names of commands referred to in the description of alias commands.
-
-commit 9163470b761af3c3f046176226b9400dcb42d00e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Nov 10 01:57:01 2012 +0000
-
-    Make sure the result_attribute dict key exists
-
-commit 63196ecfd572970595e8d7853388a59de60267ad
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Nov 10 01:56:45 2012 +0000
-
-    Bind the new connection before operating against it
-
-commit 8e07c86a0b1c6a08f009b92ecc55de5c0ee1e906
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 7 15:18:21 2012 +0000
-
-    Load libcalendaring plugin for Roundcube
-
-commit abb9e550de375d766809f0cb3450b9b7fba8f5c9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Nov 3 16:18:40 2012 +0000
-
-    Initialize auth before any work begins
-
-commit c01e4f00637b2a4d2e5b9e5a2568f2805e99e5cf
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Nov 3 16:18:12 2012 +0000
-
-    Catch Broken Pipe error (#1170)
-
-commit e0d4f5e1acaf86dd6fe7bd4599f3ee1faff71b6c
-Author: Paul Klos <kolab@klos2day.nl>
-Date:   Wed Oct 24 09:18:41 2012 -0400
-
-    Release 0.5.6
-
-commit 36b801c0a9deab721e63abcb35c9a60609e3a673
-Author: Paul Klos <kolab@klos2day.nl>
-Date:   Wed Oct 24 09:14:42 2012 -0400
-
-    Corrected indentation
-
-commit 4ef657abbb86deb765f3eaf49fcce73ea0425cc1
-Author: Johannes Graumann <johannes_graumann@web.de>
-Date:   Mon Oct 15 23:19:36 2012 +0300
-
-    Debianize: Provide 'time' required by quick fix for current 389-ds bug prohibiting proper restart (see 46a7fbf2a15f347c5fd1d579a5980d87d1906010);
-    
-    Bug reported upstream and fixed in 289-ds parent releases >= 1.2.11.15-1 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=689389 ;
-    (cherry picked from commit 98f26ff425ebd635b7262996e09d0e8d689974b6)
-
-commit 00b2a137a4256ebbba872188305de39cc0abf743
-Author: Johannes Graumann <johannes_graumann@web.de>
-Date:   Mon Oct 15 23:02:06 2012 +0300
-
-    Debianize: Check for existence of Debian-specific 'dirsrv' user and use for user/group default if present;
-    (cherry picked from commit 8624fe67b992c9a1f5d6e9b4c2f88eeaaafc67f0)
-
-commit 89aada4795207c870da0b2cf9011d450685266f5
-Author: Johannes Graumann <johannes_graumann@web.de>
-Date:   Mon Oct 15 22:41:34 2012 +0300
-
-    Debianize: Adapt to Debians use of roundcube rather than roundcubemail;
-    (cherry picked from commit 87a93c748fb5b1591a9e26e6cd377e22f54706d0)
-
-commit a84b5045a4f7513fcd3931108d1a8fdf435db48d
-Author: Johannes Graumann <johannes_graumann@web.de>
-Date:   Mon Oct 15 22:37:55 2012 +0300
-
-    Clarify otherwise redundant warning message;
-    (cherry picked from commit 9f4d66dfe7a0eb9e059433372d3b3b8ebfc55155)
-
-commit 69de7c43102e07f0d8e7cb81668eea93e9860e48
-Author: Johannes Graumann <johannes_graumann@web.de>
-Date:   Mon Oct 15 22:36:41 2012 +0300
-
-    Debianize: Edit /etc/default/spamassassin to allow for init script mediated startup;
-    (cherry picked from commit a2486764ecca3a6203d2ba6dfabeff66c95a9e58)
-
-commit fd18fa9adb754db6178bda26e48ccea31375de2d
-Author: Johannes Graumann <johannes_graumann@web.de>
-Date:   Mon Oct 15 22:35:45 2012 +0300
-
-    Debianize: Provide amavisd-requested /etc/mailname - possibly remediable through enhancement filed as #1080?
-    (cherry picked from commit a01d23ee133c90565f7ef0a49f41970ccc7efa75)
-
-commit c3ea31c955a924b89f3a4e2abbdad5233dafbd71
-Author: Johannes Graumann <johannes_graumann@web.de>
-Date:   Mon Oct 15 22:34:14 2012 +0300
-
-    Debianize: Conditionally adapt amavisd configuration path;
-    (cherry picked from commit 728ca8f9910761474ec7ad4fedd6e5793040596c)
-
-commit 0d0c09ab361d6712a2fc43ee9c487dbad6a98865
-Author: Paul Klos <kolab@klos2day.nl>
-Date:   Wed Oct 24 07:31:06 2012 -0400
-
-    Corrected indentation
-
-commit 97fe39d0bf4bc0ce86a454d07ea7a4e58c2c4756
-Author: Johannes Graumann <johannes_graumann@web.de>
-Date:   Mon Oct 15 22:33:09 2012 +0300
-
-    Debianize: Provide main.cf from Debian's example file if user choose not to debconf-configure postfix during installation;
-
-commit 6e49491cdfa359d79a076c9a74179c5b67612bb8
-Author: Johannes Graumann <johannes_graumann@web.de>
-Date:   Mon Oct 15 22:29:10 2012 +0300
-
-    Debianize: Adapt setup-ds* paths;
-
-commit 45841df53fcc3fafd98265f78068f9b1395853a2
-Author: Johannes Graumann <johannes_graumann@web.de>
-Date:   Mon Oct 15 22:25:26 2012 +0300
-
-    Clarify otherwise redundant warning message;
-
-commit 2cbecd918f846ae7a22236c119c80ea695662d7a
-Author: Paul Klos <kolab@klos2day.nl>
-Date:   Wed Oct 24 07:13:36 2012 -0400
-
-    Cherry-picked commits
-        6c297ab957fb166c4e6c67361de50f98cf6d7c20
-        cfc34c5f7fca9b45220c99e0bd6983dc3ea353f3
-    from master branch and corrected indentation.
-
-commit 6c297ab957fb166c4e6c67361de50f98cf6d7c20
-Author: Johannes Graumann <johannes_graumann@web.de>
-Date:   Mon Oct 15 22:20:06 2012 +0300
-
-    Debianize: Edit /etc/default/kolab-saslauthd to allow for init script mediated startup;
-
-commit cfc34c5f7fca9b45220c99e0bd6983dc3ea353f3
-Author: Johannes Graumann <johannes_graumann@web.de>
-Date:   Mon Oct 15 22:17:06 2012 +0300
-
-    Debianize service restarts/init script updates;
-
-commit 1f27afd02cc0022db0c464b3dfcbadf77773da23
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 5 16:07:51 2012 +0100
-
-    Set the correct default folder annotations for Spam and Trash (#1090)
-
-commit 2411a020413e4899c5508249b63e6cd7bd9cf657
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 5 16:05:28 2012 +0100
-
-    Set the correct annotation on the Trash folder (#1091)
-
-commit 3a546e0b7a59c881d8366aabe1cf5cf2050a572d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 5 16:02:47 2012 +0100
-
-    Allow the specification of a php.ini location, and attempt the two known locations (#1084)
-
-commit d211a6e58afe537d9d4b8fbcd3d8c82ce54a39f0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 5 15:51:46 2012 +0100
-
-    Skip Amavis configuration if no file /etc/amavisd/amavisd.conf exists
-
-commit b92d2972edcd5ec3325c91aec8a0b197e3e3403d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 5 14:41:21 2012 +0100
-
-    Only attempt to change the permissions on a logfile after verifying such file actually exists. (#1072)
-
-commit 44569a17eec2a0bc5d31e4016d399d7db9206229
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Oct 1 15:40:49 2012 +0100
-
-    Add tmpfiles.d configuration files
-
-commit 3434a5891e5e48b20a28431b9f20f2241cee4448
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Oct 1 12:52:32 2012 +0100
-
-    Prevent traceback on undefined Error exception (#1014)
-
-commit 64725059c447459a05f4c488954520caf47bee8e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Sep 18 10:20:23 2012 +0100
-
-    Bump release
-
-commit 213c5141572ce1186309333d8bf717123722b618
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Sep 18 10:19:53 2012 +0100
-
-    Fix syntax error
-
-commit 11408ada162194049823c35099f87575e1fdfd24
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 17 18:34:40 2012 +0100
-
-    Make integers be floats before we make the division
-
-commit 79953231f11bac98efe9b85276a3210474fd0e74
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 17 16:40:22 2012 +0100
-
-    Release 0.5.5
-
-commit f3d9637d9b9f59c7fd2ec0dccb3d1cb42172b877
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 17 16:38:18 2012 +0100
-
-    Don't forget to ship setup_syncroton
-
-commit 3e004dd37800cf70823458b623b1b7b888bb4964
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Sep 16 19:35:41 2012 +0100
-
-    Ensure unique recipients in list
-
-commit 89bb442a2817280f74464934b5daa0a042a9de1b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Sep 16 19:23:51 2012 +0100
-
-    Re-enable and tweak the kolab_smtp_access_policy cache
-
-commit 3e48993b80e7a75b176edc58fece0360f581d723
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Sep 16 19:20:06 2012 +0100
-
-    Set the default retention time for policy enforcement caching to 1 day
-
-commit 052587814b5893887ab95944e545e6ccd7160c9c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Sep 16 18:55:09 2012 +0100
-
-    Make sure Auth() is only created for the relevant domain, and at the right time (#1017)
-
-commit ca36ac058d4a324749667f9e37c68eef31ef422a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Sep 14 12:41:51 2012 +0100
-
-    Resolve #1006:
-    
-    - Clause getting a quota root as it is not necessary for a quota root to even exist.
-    - Clause receiving a response of (None, None, None) before applying any math.
-
-commit 3bcd1633493b7f0891ed333a035d1120fa12c073
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Sep 14 08:37:10 2012 +0100
-
-    Make sure no division by zero occurs in listing quota. (#1005)
-
-commit bc561af329e78170ad913a4df8de1c3d7de60a57
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Sep 13 14:08:03 2012 +0100
-
-    Include syncrepl module with pykolab
-
-commit 7b4888f9118966593408560a92e8162c52f2c5d0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Sep 13 14:04:07 2012 +0100
-
-    Only actually fail listing domains if the primary domain is the domain auth has been instantiated for (#1004)
-
-commit d00412cf9c84152cf6f4ba7f1542ecc7e9ecbd4b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 12 12:16:42 2012 +0100
-
-    Revert "List Default-Start runlevels explicitly, and start the services on runlevel 2 as well"
-    
-    This reverts commit 231f51d7f8bfbbb2d9de42741ab5a59baec5b876.
-
-commit 231f51d7f8bfbbb2d9de42741ab5a59baec5b876
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 12 12:09:32 2012 +0100
-
-    List Default-Start runlevels explicitly, and start the services on runlevel 2 as well
-
-commit 654c8c9d0f6cceafcdcbbb10704d5c28fbd16f5e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Sep 9 15:04:19 2012 +0100
-
-    Fix path for setup-ds-admin on Debian
-
-commit c52d414f8756a405fd98df58f7ca2abc040a5fe1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Sep 7 13:12:42 2012 +0100
-
-    Make sure quota changes propagate from LDAP to IMAP
-
-commit b241933e98c81fde65b2af9d0e873e00dea7b75d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Sep 7 12:46:32 2012 +0100
-
-    Remove these test templates
-
-commit 0011c58cb6d3171912ce2b97b40f0e1285898371
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Sep 7 12:46:08 2012 +0100
-
-    Clause cmd_list_quota to accept there may be no quota at all
-
-commit 729ef57b9d88fa8dd576c2dead454b2097ab5f13
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Sep 7 12:45:30 2012 +0100
-
-    Remove compose_addressbook from template files to compile and include
-
-commit dfb7f341a65de9c8cfce925484ac7a7b755598e4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Sep 7 12:44:29 2012 +0100
-
-    Include $_SERVER["HTTP_HOST"] specific configuration if it is available.
-    
-    Conflicts:
-    	share/templates/roundcubemail/kolab.inc.php.tpl
-
-commit 77186dd4f9284e8bb89aaf900132f3dd70491173
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Sep 6 12:32:25 2012 +0100
-
-    Move setting the quota to outside of the loop where we login as the user
-
-commit 2f87524023d9cc907b5015cc7fbe3b217f4f432b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Sep 4 15:27:47 2012 +0100
-
-    Release 0.5.4
-
-commit 48ffdcd019de3f1c8c2fe8b704648db8b127662f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Sep 4 13:05:39 2012 +0100
-
-    Cherry-pick changes to pykolab/imap/__init__.py from master
-
-commit 8dd7946abde86de2ddc99396b22a8486f1fa0519
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Sep 4 12:35:36 2012 +0100
-
-    Make sure we don't attempt to parse a mailbox path in full, while we are logged in as a user
-
-commit 9c4c10371707bdd20a7696387617f7b8d7116228
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Sep 4 12:34:57 2012 +0100
-
-    Remove setting / removing cyrus-admin privileges before setting annotations, as we now login in as the user before setting any annotations
-
-commit 8a917659e27d152a59ae2be378d6888d024e519a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Sep 1 16:29:49 2012 +0100
-
-    Update the default autocreate_folders to 1) include the namespace to set the annotation in, 2) conform with http://wiki.kolab.org/Kolab_3.0_Storage_Format#Annotations
-
-commit 3275ba41c56776fdc5193f4f6d1a609902a6a867
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Sep 4 10:40:00 2012 +0100
-
-    Correctly pass on the original recipients to the SMTP forwarding
-
-commit 919b7fd80416f9b9d59de7f3cfea2eb3f64efe7a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Aug 28 13:29:09 2012 +0100
-
-    Preserve any secondary recipient email address attribute values that may have already been specified (#973)
-
-commit c7fc2981cfadf9001a3c0292e8ce0d873d834ee9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Aug 26 11:34:10 2012 +0100
-
-    Remove unused, obsolete horde configuration
-
-commit 03679a41adf3261724836f5aa326f2c2305a790f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Aug 23 15:37:21 2012 +0100
-
-    Clause the inclusion of /etc/init.d/functions (it should exist)
-    Include /etc/default/$service if the file exists
-    
-    Both changes work towards resolving #972
-
-commit e23e8ea12e43dfcf58a90f477ff2be31f21b71ec
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Aug 23 15:38:27 2012 +0100
-
-    Reconnect after "login as..."
-
-commit 71bbac8d8f9ee0b4222a373c9c42b4d049dec1ee
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Aug 23 15:39:17 2012 +0100
-
-    Catch situations in which we have not gotten the appropriate separator yet
-
-commit d0df0d50b680778ca75eb4f2d44469da6683691f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Aug 17 16:51:24 2012 +0100
-
-    Forcefully use the larry skin
-
-commit cf805cbe0983ea6cf6353d12d6ab56540dd5042a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 15 09:50:49 2012 +0100
-
-    Update plugin list
-
-commit 44f1bfff4fe8efbdf854b5e7337c0d6c14c30c87
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Aug 11 15:07:54 2012 +0100
-
-    Update localization to use Transifex
-
-commit eb396ba3112759794f50f7bcd6b39ab8b7aecf4e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Aug 11 15:04:24 2012 +0100
-
-    Set .tx/config to pykolab-0.5 resource
-
-commit e50094fd5c6dfa0dc407f8bc3323287e4d39a8de
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Aug 11 13:49:45 2012 +0100
-
-    Attempt to be a little smarter when updating the language files
-
-commit d60a6d308e25b7f417c8de6f9c666e1bdcf9cf7e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Aug 11 14:54:16 2012 +0100
-
-    Add Transifex configuration file
-
-commit b280f27e06f6b3dc5d89d1db4d0d0a11dea068c5
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Aug 10 15:53:20 2012 +0100
-
-    Bump teeny for 0.5.3 release
-
-commit 0df2808a48ddaaa3f7c3150e036d102303c5ec12
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 8 16:56:13 2012 +0200
-
-    Add a command to rename a (user's) mailbox
-
-commit b11254c47b8e34841096aa29bdaddee77032802a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 8 15:55:55 2012 +0100
-
-    Fix typo
-
-commit 417ff49dc51d627a09a8c84c39d270deee3d168b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 8 15:05:01 2012 +0100
-
-    Ship commands to set and list mailbox metadata
-
-commit a445352de6186de3e2f2b73adc1dfdc0a73d48ed
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 8 15:04:38 2012 +0100
-
-    Add functions that support some of the new command line client commands
-
-commit c3b6340193458d39fd83b67d8c3cf9ad0869cb44
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 8 15:04:02 2012 +0100
-
-    Print mailbox ACLs listed in a somewhat parseable format
-
-commit 6edd913b83e57e2df5b8403c3fb9757d237003fe
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 8 15:03:26 2012 +0100
-
-    Make cyruslib support recognizing the difference between shared and private annotations
-
-commit c290f4d355ef9ab4a3011eb846affd60f1457049
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Aug 7 12:39:45 2012 +0100
-
-    Remove duplicate build requirements
-
-commit 9ae42876d8138f9b5a91762ad22500123d88fc0e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Aug 7 12:34:03 2012 +0100
-
-    Add new command-line utility commands lam, sam and dam (list, set and delete ACLs entries on mailboxes)
-
-commit e935591a4cb62f85e5590d914b5913d051ac4836
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Aug 7 11:39:06 2012 +0100
-
-    Fix typo
-
-commit 1e1fd7e59449f0739413e6c6190e0a20864ce911
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Aug 7 09:55:42 2012 +0100
-
-    Update the default configuration to include the [kolab_hosting] section
-
-commit d5581f3e336f94725304578bd8ef77e30d16edb4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Aug 6 17:00:40 2012 +0100
-
-    Bump teeny release for bugfix release 0.5.2
-
-commit f1914c04c8e924b81aeffd1e465654ff81ff40ca
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Aug 6 16:55:40 2012 +0100
-
-    Prevent options from components from being added twice (#941)
-
-commit 8636607bc5bb01ee6c4c4e52e1cc4f3fa1739df3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Aug 6 16:58:00 2012 +0100
-
-    Use timezone from cli option --timezone if specified (#942)
-    Correct path used with Augeas insert (#943)
-
-commit 933d9a23f272c7633b195ed435a288e8015a2fa5
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Aug 6 14:49:47 2012 +0100
-
-    Bump release for hotfix
-
-commit 9d77d0548f40b70da0d1ed16a5f362530234ed09
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Aug 6 14:48:56 2012 +0100
-
-    Fix entry_dn being referred to a little too early
-
-commit 3c890648406e656377a585e5c33f93f559e4372e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Aug 5 20:25:34 2012 +0100
-
-    Bump teeny for release of 0.5.1
-
-commit 885e2be65bdd27ee40e11921a0a3a0a98746d644
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Aug 5 20:12:11 2012 +0100
-
-    Make sure new users are subscribed to all folders in the personal namespace (#922)
-
-commit e9203b501fc18b684a37651341e34218db2b8c7c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Aug 5 15:33:50 2012 +0100
-
-    Prevent a singular alias (a basestring thanks to normalization) from being compared to a list, causing an endless modification loop for corner-case LDAP entries (#934)
-
-commit f0bdaf9a768b9fb2e180595c3ee965df146e1cde
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Aug 4 13:18:35 2012 +0100
-
-    Set default ACL on associateddomain=%(domain)s,cn=kolab,cn=config to allow users in %(rootdn)s to read their own domain information (#927)
-
-commit e18c12b6c8951738f685d632a1337e1e11c8a31f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Aug 4 11:48:15 2012 +0100
-
-    Add a notice on the setup now being executed (#919)
-
-commit 47805d9733a97d52f1236d9f5adfc08287ae5c21
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Aug 4 11:44:43 2012 +0100
-
-    Ensure all components get their chance to insert their own command-line switches
-
-commit 03b7bd9f19b635bd4818240a7b88f01c6cb44d3a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Aug 4 11:07:37 2012 +0100
-
-    Ask for the timezone if it hasn't been specified over the command-line options
-
-commit e1f0780b02149278390517e7731f8b39ad7d7556
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Aug 4 11:04:57 2012 +0100
-
-    Add setup_php for the PHP timezone
-
-commit d3fae3685b2e9bd905887def6d8378cf728a3246
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Aug 4 00:08:22 2012 +0100
-
-    Fix #916 (iTip messages w/o resources getting stuck)
-
-commit 14343d7078e4b8871184491471172cf17f81dd6c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Aug 3 16:37:01 2012 +0100
-
-    Release version 0.5.0
-
-commit 670e4c5527b0199b748c651b6dde9b4e944088d8
-Merge: edac79c 9d20b49
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Aug 3 16:36:41 2012 +0100
-
-    Merge branch 'master' of ssh://git.kolabsys.com/git/pykolab
-
-commit edac79c4a05fb7e04cc6a012b5ac3b40d5856ca9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Aug 3 16:36:22 2012 +0100
-
-    Adjust the freebusy server setting for a default deployment
-
-commit 9d20b49533afad2488078e96e89b686a8b516063
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Aug 2 23:57:03 2012 +0200
-
-    Add size, time and lookthrough limits, and idle timeout for the service account by default
-
-commit 0686afc5f8bc1c4b01ad359fa82988d63954487e
-Merge: 1d6cd67 c68eb41
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Aug 2 16:43:38 2012 +0200
-
-    Merge branch 'master' of ssh://git.kolab.org/git/pykolab
-
-commit 1d6cd67de1f83ac1db4daf37a3c54684db185edd
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Aug 2 16:37:38 2012 +0200
-
-    Make the default installation refuse anonymous binds, but allow a command-line option to allow anonymous binds.
-    Add size, search, time and idle limits to the service account
-
-commit c68eb41b30872f6620284b827e3aad680f7aa679
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 1 10:59:23 2012 +0100
-
-    Explain what user / group we are expecting to get.
-
-commit 4ff69e9753435b90e8b9eb538dd6fdabcd7282f8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 30 19:36:26 2012 +0100
-
-    Add autocomplete_single = true for roundcube configuration
-    Add default setting for vlv_search
-
-commit 0af5021ad9af906ff0ac79162f8034a2180bf33b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 30 18:13:20 2012 +0100
-
-    Bump pre-release
-
-commit 57dce51c66cfc7425041a3b841067cdc06540e6c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 30 18:12:49 2012 +0100
-
-    Update roundcube's main.inc.php to include the activesync plugin instead of the zpush plugin
-
-commit ad1f621259f21382478037108edfd6b987729f24
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 30 13:02:00 2012 +0100
-
-    Update rebuild.sh
-
-commit d4d2317478d063688f35eb648e6f453bee5a7c92
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 30 13:01:41 2012 +0100
-
-    Bump pre-release
-
-commit de83ec69d5592db428090bfff90052d546115d1e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 30 13:01:19 2012 +0100
-
-    Do not exclude %{_sbindir}/kolab-test
-
-commit 29973329fbb90300770289dd59f1faa0e170ac6b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 30 12:27:29 2012 +0100
-
-    Correct Makefile.am (tests/* not shipped, kolabtest.py in install)
-
-commit f46ca1d9d87993ba55d097ff7a919e6c685b9ec2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 30 12:12:33 2012 +0100
-
-    Remove kolabtest.py from automake
-
-commit dd1ff28822448688ab7be0e3a95440fb06e05581
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 30 12:10:16 2012 +0100
-
-    Bump prerelease
-
-commit 1093b3bd453111602739cc004a6fb025b8b6c621
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 30 11:11:04 2012 +0200
-
-    Add bin/rebuild.sh to .gitignore
-
-commit 32c9b4925c49a2513d17e189d3c731b0d265c015
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 30 11:10:43 2012 +0200
-
-    Import modules needed
-
-commit f7e567af623289d2a2b9372c569633cc8091f826
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 27 11:29:33 2012 +0200
-
-    Add more build requirements, even though redundant, so that a clone of this repository only needs a single yum-builddep for the build to succeed
-
-commit 9f1258853c71bfd8a7ce6819fb8740f381fb397c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 27 11:29:20 2012 +0200
-
-    Add setup procedure for Syncroton
-
-commit a413bf77e7b78ba93bd369f3439f5856350454b3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 27 11:23:34 2012 +0200
-
-    Add libkolab mysql.sql to initialization
-
-commit b401410cf8237f131fbdab8fb6a800621e42740a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jul 26 17:47:57 2012 +0200
-
-    Add odfviewer and tasklist plugins
-
-commit a03796a1b498fc6fe7fc52aa7adde11adbd820b2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 25 13:43:59 2012 +0200
-
-    Add settings that Syncroton thinks are nice and useful
-
-commit 8333b4872b103ed094cce295d319e1c43975ee1a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 25 09:48:44 2012 +0200
-
-    Bump pre-release
-
-commit 0c11c87422c730ab5202e452141fffb142f0dfbe
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 25 09:48:12 2012 +0200
-
-    Make sure to pass along conf to the roundcube template as well
-
-commit 4581f966d76d7375ae2616618e692f38e655eea9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 25 09:47:50 2012 +0200
-
-    Prioritize Syncrepl over paged search control / vlv
-
-commit 8f5dacadddb345932df7b3f3c0a7b2511ae71268
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 25 09:47:12 2012 +0200
-
-    Add syncrepl compatibility for OpenLDAP
-
-commit 0462630173579c7ddc9a3a3e27e99c841b300ea2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 20 10:37:45 2012 +0100
-
-    Remove obsolete kolabtest.py
-
-commit 744e5ee8c207354421c0803b49f602cf66bd3cf8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 20 10:35:38 2012 +0100
-
-    Correct the running of tests in %check to only include unit tests
-
-commit efaef7e429879c34d30c12c4561ab201f2dec27e
-Merge: c3cb7ec bde1f6b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 20 10:34:05 2012 +0100
-
-    Merge branch 'master' of ssh://git.kolabsys.com/git/pykolab
-
-commit bde1f6b4d468c6f9e9f7586280c79736ca07ca91
-Merge: a91c6f3 2c9f4f4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 20 09:20:59 2012 +0200
-
-    Merge branch 'master' of ssh://git.kolab.org/git/pykolab
-
-commit a91c6f384436c910e7f98dfbec5765026fe4e0c5
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 20 09:20:19 2012 +0200
-
-    Add some functional tests, move unit tests to separate directory
-
-commit 30ea265c66630f7961aa957ea8448086977f7a4f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 18 19:11:27 2012 +0200
-
-    Add some tests for the client-side of the WAP API.
-
-commit cdb841b97a6e0a563c9227e08c9001d58acf2658
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 18 19:08:56 2012 +0200
-
-    Accept user argument to user_info() function
-    Add a request_raw() function and make the request() function use it
-    Add function form_value_generate()
-    Accept a domain argument to the authenticate function
-
-commit abb12c868b4cb138b8bbd1af67b1dd31fb883aa7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 18 19:08:09 2012 +0200
-
-    Apply the correct sys.path extension
-
-commit d44815b60ab21da0f6d04e0d9f218828aa27cdb4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 18 19:07:35 2012 +0200
-
-    Execute the correct change notification callback function
-
-commit c3cb7ec328dfac4579a246753455fa592e0dcd46
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 18 12:01:16 2012 +0100
-
-    Bump pre-release
-
-commit ede89aab8d5eac1d8173347b22c3cc408d1aff39
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 18 12:01:01 2012 +0100
-
-    Update timezone test
-
-commit e389b12b4deb578ea2e57c50a24f47afc8a07981
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 18 10:38:14 2012 +0100
-
-    Generate the localhost.pem dummy certificate if it doesn't exist (#886)
-
-commit 173da3f2b9e0b95550c20c4b36a3f0d90c0a29c7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 18 00:02:35 2012 +0100
-
-    Bump pre-release
-
-commit 2c9f4f4af7fbfe7739a32794eda5c0045cc85280
-Merge: 31a96c5 21b33ad
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 18 00:01:51 2012 +0100
-
-    Merge branch 'master' of ssh://git.kolabsys.com/git/pykolab
-
-commit 31a96c533281c2e25b5b324bc49361b13b77853c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 18 00:01:03 2012 +0100
-
-    Add dependency on python-kolabformat in addition to libkolabxml
-
-commit 21b33ad600d70e178eb48a9053314f58559fccfa
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 17 22:59:48 2012 +0200
-
-    Add timezone test
-
-commit 7480dafd4cf99d2ef533a9c9dd2f3b31b843d7a0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 17 22:59:08 2012 +0200
-
-    Fix pykolab.xml.event.get_end()
-
-commit f144bc0e96c90e29ac465409e9cae5c0544388fd
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 17 15:47:40 2012 +0200
-
-    Fully implement delegation
-
-commit b3ed3762f8c064d5454fcf9d7d0edfbde226029d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 17 15:45:46 2012 +0200
-
-    Add TODO for to_message_itip() in pykolab.xml.event.Event
-    Only log an error about no sender having been specified when from_address is None
-
-commit 4c28c8afc519425b0c30c7ab8aa0e46d0d9356ff
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 17 15:35:26 2012 +0200
-
-    Add delegation support.
-    Fix calling for data on the organizer
-
-commit a4770fcb2d67e144e1b4a63bb5d0f0fb20ab391a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 17 10:34:34 2012 +0200
-
-    Reduce code footprint for itip/resource detection,
-    Reduce code footprint for event updates and methods other than requests
-
-commit 337a1a1c28b0499ab480469a90ae82d639615755
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 17 10:52:32 2012 +0100
-
-    Fix reference to cyrus-imapd section, which is actually named cyrus-imap
-
-commit 7cb5d6f9e6276c5e258204fdd10ae5c38ce50931
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 16 15:25:47 2012 +0100
-
-    Bump pre-release
-
-commit ae7fcaf0642c588901c1498f34894f6702bec6d4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 16 15:24:31 2012 +0100
-
-    Add icalendar tests
-
-commit 455bef1bfcd918d19f0df3ebe89b1b1a207f8751
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 16 14:13:04 2012 +0100
-
-    Create spool directories for wallace
-
-commit 113bdbc4c3e211c0682f392f4691924de6d84943
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 16 13:33:52 2012 +0100
-
-    Fix packaging issue (invalid %attr mode line)
-
-commit 15f07fd7ac0031c67ae33c94e7f0af85fb8adc3d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 16 13:24:22 2012 +0100
-
-    Bump pre-release
-
-commit df981ed2a84c35ab66a6ab82a87a645a57b424fc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 16 13:24:04 2012 +0100
-
-    Start wallace with setup
-
-commit 25ed51dacc8bf40518dc4ee932cfa8e296171809
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 16 13:21:49 2012 +0100
-
-    Supply default for default_locale in the default configuration
-
-commit fe80686531bcb8f68b3fa4beef5b277152046ffb
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 16 13:20:53 2012 +0100
-
-    Pull the correct default locale (#883)
-
-commit 06acf4fbccf0d9f2a986145116aef45eb754e517
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 16 13:19:56 2012 +0100
-
-    Enable wallace content filtering by default
-
-commit f4fc482d5317e35759448b986a85e6900e680d98
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 16 13:19:28 2012 +0100
-
-    Fix typo
-
-commit 469f9c5520799be5dde1f3d7cba8ce317a9213e9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 16 12:57:11 2012 +0100
-
-    Escape unsupported locale setting (#883)
-
-commit 1b5a666f9a12d55a382fb608ed2cd03dba3dcf99
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 13 15:02:15 2012 +0100
-
-    Fix tests for basestrings while actually we want strs
-
-commit 53b5d85dda5f956892a0074863d965d4c14a96fe
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 13 14:56:45 2012 +0100
-
-    Attempt to fix running tests on target platforms
-
-commit b7fda1267f8b9d85601b7a283b59ff54c8b671d4
-Merge: d0f7f0c 2f9376c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 13 14:48:03 2012 +0100
-
-    Merge branch 'master' of ssh://git.kolabsys.com/git/pykolab
-
-commit d0f7f0cc150bb2369b848201e58a14447899e86a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 13 14:47:35 2012 +0100
-
-    This error should actually just be a debug message
-
-commit ce7e7072857d3122c89de30543051ef3c5fad2e9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 13 14:47:01 2012 +0100
-
-    Make sure timezone handling is implemented for start and end dates
-    Also, do not accidentally convert dates to datetimes
-
-commit 01abb8447a1f52bbba181c2abacbe916d60b2793
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 13 14:46:00 2012 +0100
-
-    Add resource_filter to local_recipient_maps
-
-commit 5e6901f09d3df30c6dbb60daf3f5d98db53af936
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 13 14:44:32 2012 +0100
-
-    Add spool directories needed for wallace
-
-commit 2f9376cdfaca44939041cf9c809cb83a148af108
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 13 13:43:32 2012 +0200
-
-    Use utility function to_dt() before comparing es/is/ee/es, greatly simplifying this part of the code
-    Make sure we have append permissions
-
-commit bbabfa8913b349c79023df2fcfba79b257ddc7d4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 13 13:39:02 2012 +0200
-
-    Add utils.to_dt() as a convenience function to transform a d or dt into a datetime (with timezone) for comparison in resource management
-
-commit 02b4f24ca5cf66fd108f723cb4bfb6319a9d93a8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 13 13:38:48 2012 +0200
-
-    Add utils for common actions
-
-commit 02b4fb9b938a0a8db21241fdb7c223caca5f881e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 13 10:57:23 2012 +0100
-
-    Fix $prog variable so the service manages to stop when requested
-
-commit 4517af7aeaa7d6ff925a289943d70ece1ce70035
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 13 09:20:02 2012 +0100
-
-    Bump pre-release
-
-commit 6714e135e16caff77b2576237e6f8002dfb4b94f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 13 09:19:38 2012 +0100
-
-    from distutils import version
-
-commit 2c34c47f564d2f5c7d3cb115448a51707b43da99
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jul 12 14:24:54 2012 +0100
-
-    Bump pre-release
-
-commit 84e658f2ab2e2cb55c25e312dc6933fb6dae994d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jun 21 10:23:03 2012 +0100
-
-    Add wap_client
-    
-    Conflicts:
-    	pykolab/Makefile.am
-
-commit 51b48fea228a04ccb2891c2e889fc0fc512ab070
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jul 12 12:52:04 2012 +0100
-
-    Add set_ and get_lastmodified() functions
-
-commit 1cd55767c0ca4a6e9150a04b8d684d2f60461d47
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jul 12 12:51:43 2012 +0100
-
-    Follow standard indentation for these daemon options
-
-commit e5febd81c65218e7ca1dd2226e35aa4e02617799
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jul 12 12:24:11 2012 +0100
-
-    Bump pre-release
-
-commit 6c6a868467b36d5b5d5dfbc1f3882131e11d2558
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jul 12 12:22:44 2012 +0100
-
-    Provide Python 2.6 compatibility in multiprocessing.Pool class arguments
-    Execute do_wallace() only the one time
-
-commit e679b768f55589ab30817a17dcdb7e88be23f85a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jul 12 11:56:47 2012 +0100
-
-    Prevent failure from writing the pidfile from stopping the process from running (#877)
-
-commit 63e9da31281eda0d634c2511e404d50e64a908af
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jul 12 11:55:25 2012 +0100
-
-    Correct permission problem on the pidfile directory (#877)
-
-commit 0b6ae00ef5e3a41780928c7d2ecae9f7eb045a20
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 11 15:46:36 2012 +0100
-
-    Bump pre-release
-
-commit 6201e52c7701891b2f3a1ba91d51d338ef74cec4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 11 15:45:45 2012 +0100
-
-    Import modules used,
-    Avoid using log (not available),
-    Avoid printing out information when it's irrelevant
-
-commit 2ab8963285e34959005fbbc26a218443ed60c1a1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 11 15:28:23 2012 +0100
-
-    Fix wallace %post (#873)
-
-commit f833da8067e29eb89ab9d9876fcd1a74afb5b503
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 11 15:24:18 2012 +0100
-
-    Bump pre-release
-
-commit bd6da451f9428ae66a7980f5802392fe979c948f
-Merge: 70e35ba 69bd973
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 11 15:23:53 2012 +0100
-
-    Merge branch 'master' of ssh://git.kolabsys.com/git/pykolab
-
-commit 70e35ba03b22d60097c7371084d23bd1944fc069
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 11 14:40:44 2012 +0100
-
-    Bump pre-release
-
-commit a182a939513865cf94d65c2a6dbb449be834a440
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 11 14:07:13 2012 +0100
-
-    Add command-line options for the targeted process username and group name
-
-commit 569f7874038253f407d1414a696974dd5d6e8991
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 11 14:02:53 2012 +0100
-
-    Bump pre-release
-
-commit 901a513c5e929c80d01cbda68805e246f068ddbf
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 11 14:02:27 2012 +0100
-
-    Add Auth.search_entry_by_attribute
-
-commit 69bd973cf52c04c3a0c89a6355190e235c417214
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 11 13:26:51 2012 +0200
-
-    Add ou=Shared Folders to LDAP setup
-
-commit 0d91d43d85653d27e5c33968e5ff132bde644864
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 11 13:25:56 2012 +0200
-
-    Add ou=Resources to setting up LDAP
-
-commit 8e969f8f8fa576370e2e6cb165e0a39bea7a02a3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 9 16:11:56 2012 +0100
-
-    Add explicit requirement for cyrus-sasl to kolab-saslauthd
-
-commit 75ab12c01636b476cf2c09215cfa1032c52f14d3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jun 21 10:23:27 2012 +0100
-
-    Bump pre-release
-
-commit 723715772f4c2ea8b691ea9c221473ceecc18f44
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jun 21 10:23:03 2012 +0100
-
-    Add wap_client
-
-commit 0c4f845ce0441feec565a0ab5a521377d949a2e2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jun 21 10:18:44 2012 +0100
-
-    Add mailserver_attribute to the default configuration
-
-commit 52fae42619833a394dde8cf755dd4f77da52c7d4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jun 21 10:16:46 2012 +0100
-
-    If a realm is specified, can be found, use that realm to instantiate Auth (or use the primary_domain) (#852)
-
-commit 0e0c89b4f89d15a01aef61689ec899fa2a958e2d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jun 14 15:15:57 2012 +0100
-
-    Prevent utils.translate() traceback (#842)
-
-commit 44cf0065f458714edec23b1d6b093426cd493de1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 17:01:05 2012 +0100
-
-    Add pykolab.imap.cyrus.Cyrus.connect()
-
-commit 185be06162c19d9b4a5bacdfb10912829bcb79b6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 17:00:42 2012 +0100
-
-    Add set_quota()
-
-commit 85e9ef8d3e5a8f4204b4bff2c546d3b1cc4dfe0d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 16:59:33 2012 +0100
-
-    Reduce dynamicquota complexity for now
-
-commit f34e68f7c1a9b31de59a8d16a00db1fef69059d9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 16:58:44 2012 +0100
-
-    Add user quota handling
-    Some lengthy line reductions
-
-commit a154359af4f205caa694f1dcebbaf03490c1c3ae
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 16:45:13 2012 +0100
-
-    Only create directories that do not already exist
-    Do not use log it doesn't exist here
-
-commit 957e51a28d2961d31cbac32b21c4f2ec01c20774
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 16:44:51 2012 +0100
-
-    Import the required utils
-
-commit c4bcedbe35e24fd8264cff077044f5309855fce3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 16:43:03 2012 +0100
-
-    Failed or no quota should return None, not 0 (which is actually valid quota)
-
-commit 968f53e040591fce8790cd0aba030f6f6810e758
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 11:47:42 2012 +0100
-
-    Some pylint errors,
-    Add lq/lqr functions
-
-commit 1d22592d4c67620effdbfb9fdf72b63bc8303ece
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 11:47:13 2012 +0100
-
-    Start implementing the quota enforcement again
-
-commit dd9464f89d8a8632f5ae777b5964ff0d04be7bb9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 11:46:45 2012 +0100
-
-    Clarify it's not UTF-7 exactly, it's IMAP UTF-7 ;-)
-
-commit 8c1f5eb1594913d07d727409fb682dd5e6416b60
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 11:40:24 2012 +0100
-
-    Add command 'list-quota'
-
-commit 9d544f1ed4f7181d11916d3cf19a00e08acfe1a3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 11:39:54 2012 +0100
-
-    Fix command-line sync
-
-commit f2247ae5bc393e813e3775c82e1c051dbbcabd78
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 11:39:18 2012 +0100
-
-    Add hard dependency on pyasn1{,-modules}
-
-commit e3d33d10fbdbf362b89476fbdab6c7a6ca0a45fb
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 11:37:40 2012 +0100
-
-    Make use of the new ensure_directory() function (#840)
-
-commit 1df64e63556db23be0d701ca10c4fd35f87f9aec
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 11:37:19 2012 +0100
-
-    Add helper function to ensure a directory exists, and with the correct permissions
-
-commit d310f8a8ba453cc1030a6a83cbdd8332a5fb64ff
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 13 11:35:06 2012 +0100
-
-    Add QUOTAROOT command lqr
-
-commit 5c1c4c70bae2be6e50063434e8ec69ef89bd4983
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jun 12 13:08:50 2012 +0100
-
-    Search for or fallback to the default_locale for the user's preferredlanguage attribute. (#839)
-
-commit ac539faed494c3abdf6abbbae42fbb9dfcb4aad8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jun 11 14:12:50 2012 +0100
-
-    Remove synchronize() function (obsolete)
-
-commit 3df45ed444e38853e683334b4a5cbdd7e3d17d2a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jun 11 14:12:40 2012 +0100
-
-    Sort functions alphabetically
-
-commit 30a82aebf2cabbd8842bd5b4da2c0a91b971e7bf
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jun 8 13:04:00 2012 +0100
-
-    Add amavisd configuration to setup_mta
-
-commit 0843e90fc61b28a8cf13aa1e1443585873c4a1da
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jun 8 12:58:24 2012 +0100
-
-    Replace the values with variables
-
-commit 3bcf9a6e60580006182e3521cae4ea68f188f882
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jun 8 11:48:08 2012 +0100
-
-    Escape all variables for cheetah
-
-commit f1f0863b3768c2aced91ba9b07a7bdc45bf991c4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jun 8 11:45:46 2012 +0100
-
-    Add amavisd.conf.tpl
-
-commit c5ff297472a0ae585e7ad19634cb10611f98922c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jun 7 17:39:46 2012 +0100
-
-    Include "body" in the list of sieve extensions by default. (#832)
-
-commit 83b168527a91a6ebaf2b4c4dc0970bf3dd3941ec
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 6 17:10:29 2012 +0200
-
-    Accept recipients that are not LDAP entries (#829)
-
-commit c5c1b63e68f65b4999ad035dd168c5d530d949fe
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 6 16:09:56 2012 +0200
-
-    Include LSB headers for default-start and default-stop
-
-commit 5b96c88e3777c16f50b87227fc46e48807aa5b8a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jun 6 10:22:02 2012 +0200
-
-    Correct the Kolab SMTP Access Policy not matching alias email address to it's own authenticated entry (#827)
-
-commit 6e6f603f9351e64920ab5b4b71340347d3528f2f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jun 5 12:42:14 2012 +0200
-
-    sys.exit(0) on timeout waiting for DATA request state, or logs will show the policy in error (#817)
-
-commit 721ed5bb6a54b0aa817fcab9cae78a13e2d9f3f4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jun 5 12:40:27 2012 +0200
-
-    Quote the password entered to the temporary defaults file (#825)
-
-commit dc65e08a6acfdf239b8089153e2025d1c80a50ad
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jun 5 12:28:22 2012 +0200
-
-    Use find_recipient() instead of find_user() to verify delegation. (#826)
-
-commit f66e8f9a9d1a5f1a620f450c4c1f1c109d5747d7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Jun 3 18:36:54 2012 +0200
-
-    Multiple recipient entries to be found associated with the recipient email address to result in the SMTP Access Policy not being applied. (#816)
-
-commit d8665844e86329e4f0db2fdb4fafe4335328bcfd
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Jun 3 16:56:36 2012 +0200
-
-    Set inetdomainbasedn attribute value for root dns that are not the same as the standard dn for the configured domain name.
-
-commit 7c7f989572325a62de65e3e8080a9f848148d638
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 31 16:14:17 2012 +0200
-
-    A default setup does not support SSL
-
-commit 445cf0701f7dc9e301f256cf270afdb4b9a772a8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 31 14:45:14 2012 +0200
-
-    Attempt to append to the log file, escape permission errors on log file
-
-commit 46703a8c8a615f3d75728536bc2bb272d2d40316
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 31 14:45:05 2012 +0200
-
-    Add make check target
-
-commit 54225ac2020234df7821b59e0165721340cdd0a9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 30 15:04:51 2012 +0200
-
-    Fix auto-completion (#812)
-
-commit 6773c015c5422f4b265ba59fb190fc22156d0469
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 30 14:41:38 2012 +0200
-
-    Do not load commands that fail loading (#811)
-
-commit bb2020d418255e0a3767878c48474896ed57c55a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 30 14:04:31 2012 +0200
-
-    Remove inconsistent default option value for log file and replace with correct location
-
-commit 02c032ccb58b4aed02f9cb0590e0f36c5dfb8b63
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 30 11:01:15 2012 +0200
-
-    Add kolab-saslauthd.sysconfig
-
-commit e2b0cacccc6aed5fbd8864fc694f437130899327
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 29 10:47:39 2012 +0200
-
-    Make sure we use no functions that have been introduced in Python > 2.6 (#803)
-
-commit 70851f82d1d67336cde884569d37bc484361e53f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 28 14:11:06 2012 +0200
-
-    Introduce a timeout for requests that end prematurely and never reach the data protocol state (#780)
-
-commit 3b3d2b56a880e9ce08a3bb1279860d4dc6eed069
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 25 16:37:54 2012 +0100
-
-    Make sure squatter runs regularly (#801)
-
-commit 3c189aa376e98790ab006d16f5b61b82059ef3ad
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 25 08:29:13 2012 +0100
-
-    Make sure our log file has the correct owner, group and read/write permissions
-
-commit c116e801d7611d38f5c70f0d148de1616be5643e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 24 17:20:48 2012 +0100
-
-    - Use pools instead of the less subtle threading, as threading would
-      allow the daemon to lock up under heavy (> 10k/s) load.
-
-commit 205d67c00df3f0562469be8114bddc1a535a7202
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 24 17:19:11 2012 +0100
-
-    Remove extraordinary debug logging statements and conform to the general <= 80 chars line width convention
-
-commit 0a287401ae7a29a9e30696f4774f160ca751a34d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 24 12:15:13 2012 +0100
-
-    Extend tests to 43 in total (attendee, event)
-
-commit c8b897e57342e565c7f01fcbffc470c14fab73f6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 24 12:03:46 2012 +0100
-
-    For an attendee (delegator) delegating to, the participant status must be set to DELEGATED
-
-commit 63f91132045535cf7c48757fb1afbe08c7f252d6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 24 11:49:41 2012 +0100
-
-    Generate an object uid upon instantiation of the Event() object
-    Add keyword 'cutype' as a valid parameter to add_attendee()
-    Add function delegate([delegators], [delegatees])
-    Correct call to obtaining an attendee's participant status
-    Add function get_ical_attendee_participant_status() that returns the string (key) not the constant (value)
-
-commit f4f1183d1a66df1d4faff511b178867d879a90b1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 24 11:48:23 2012 +0100
-
-    Add delegate_from(delegators) and delegate_to(delegatees) functions
-    Add various setter and getter functions
-
-commit 4063fbf9ddc282696f0a514f4332fb8505014617
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 23 18:35:32 2012 +0100
-
-    Bump pre-release for rebuild
-
-commit 6124367f8e5bfa56eef0e58ee9394f0263850297
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 23 18:35:00 2012 +0100
-
-    Escape EL 6 missing assertIsInstance in testing
-
-commit 5c44c0561610b70212222636d297388b82b4b0b2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 23 15:34:52 2012 +0100
-
-    Add build requirement for python-icalendar
-
-commit c7beaa4b6295406076ecf941cfdf3358bfd6752e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 23 15:19:27 2012 +0100
-
-    Also add in libkolabxml (or, actually, python-kolabformat) as a build requirement
-
-commit d995c108d0599bd4c1a6f5e9943e97e438519523
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 23 15:09:39 2012 +0100
-
-    Also require python-ldap for the build
-
-commit 37c467f5f57ee2cd0677fc8e28da59ce8cd01828
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 23 14:20:58 2012 +0100
-
-    Bump pre-release
-
-commit aef76ccc531c579737c1276ce3c9672f3aeecb4e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 23 14:20:36 2012 +0100
-
-    Add build requirement for python-nose and execute tests in %check
-
-commit fbd202c47d4891b189de7218c6f89f39cab2bd43
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 23 14:17:47 2012 +0100
-
-    Include tests/*.py in EXTRA_DIST
-
-commit 40e3e4d130da66fe1b973629d83883193e342bc5
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 23 14:17:25 2012 +0100
-
-    Add extra classes to export
-
-commit 12a225d6f2ea74be610a6b00bf5d54e7272deb1f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 23 14:14:41 2012 +0100
-
-    Add raising exceptions for invalid values being passed along.
-    Use maps to lookup values or keys
-    Remove print and log.debug statements
-    Add functions get_attendee, get_attendee_by_email, get_attendee_by_name
-    Check input for set_start, set_end
-
-commit bd561b3e7b4e26d53d6882eb9d42c437f4c8bd60
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 23 14:02:12 2012 +0100
-
-    Add exception raising to attendee
-
-commit 84992b37c15405a6276ced189a9de185c000a3da
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 23 14:00:55 2012 +0100
-
-    Rename test files to at least somewhat indicate what each of them is for.
-    Add tests for contact references
-
-commit 8dbdba5cc919cefc5b4ab12f2b2cfeb14b2c4ae1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 23 13:38:40 2012 +0100
-
-    Begin work on a set of unittests
-
-commit 90785cfbce1a9cd0f773b0ad28592fb1537e2a69
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 22 19:16:37 2012 +0100
-
-    Rebase on top of python-icalendar 3.0
-
-commit fb1a50024e454c9c78b71990bf986e9dcc0ac606
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 22 19:14:06 2012 +0100
-
-    Add a sub-package pykolab-xml (requiring libkolabxml, required by wallace)
-
-commit 6d0e9317c91f98fac955356563363c9cfa0d8a9b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 22 19:13:53 2012 +0100
-
-    Add xml/ to dist
-
-commit 1c1b580e9c9e9f98eb6a5faf25e061cbf0d413e4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 22 19:13:26 2012 +0100
-
-    Add default for setting sharedfolder_filter
-
-commit 3e893314d7c0a6caf007c98b9089d596669416e0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 22 03:46:42 2012 +0100
-
-    Update Wallace resource module to send iTip responses to the organizer
-    Create directory tree needed
-
-commit 7184d5f07958887e500907d28a38659595ea62c6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 22 03:46:06 2012 +0100
-
-    Create the necessary directories way after init
-
-commit fd2cee5019d765fa28e1f2d9c33bd5c4af08c367
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 22 03:45:34 2012 +0100
-
-    Update event to spec of replying with sensible iTip messages
-
-commit 17cab1bb4e5271ff7330c229f65161b4cca29b89
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 22 03:44:55 2012 +0100
-
-    Add additional helper functions to contact references
-
-commit 45310fe30d302d30359c119d2a783e3223d2fb54
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 22 03:44:25 2012 +0100
-
-    Update participant_status_map
-    Add additional helper functions
-
-commit 33e3eb39fee78bc917ade346530ab9859603ee85
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 21 14:46:49 2012 +0100
-
-    Be a little more robust about the shared folder strategy.
-    
-    The kolabTargetFolder attribute is not yet being value-checked, and even
-    though the objectClass kolabSharedFolder is required, the value for the
-    attribute may or may not have been prefixed with 'shared/' or 'shared.'
-
-commit 726fcdf9a002f706d048a8dd135be328d0849010
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 21 14:44:55 2012 +0100
-
-    Add the new settings to the default kolab.conf
-
-commit 0387b1dc726f4b7e55f6fa01f42808a0135755c1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 21 14:40:24 2012 +0100
-
-    Initial, rough version of resource handling
-
-commit 8b6068013328566e52540d4e9dcc91e80b3708f5
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 21 14:40:00 2012 +0100
-
-    If possible, switch user/groups when starting
-
-commit 0412e7428532533e3f57c01b6f5f8e2d853d7b0a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 21 14:39:34 2012 +0100
-
-    Start wallace as non-root
-
-commit 5b46eef3ef59edba8b936d8f4ced49917a18020d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 21 14:39:05 2012 +0100
-
-    Rough implementation of kolabformat wrapper
-
-commit 90379b582f5ae828af3ee915c7bcf89bb3af6545
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 21 14:38:45 2012 +0100
-
-    Add function find_resource()
-
-commit 18e7a55b4c030b23d502d73b7bffa91be3b80f2a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 21 14:38:01 2012 +0100
-
-    Add find_resource()
-    Bind before actually getting entry attributes
-
-commit b9ca026e2c9d98277be635f2264f48747190194e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 18 12:48:30 2012 +0100
-
-    Correct the permissions on /var/lib/kolab and /var/log/kolab
-
-commit 32c1c0720ec1ef3b0d8e84e2dfc39e7e59e01bdf
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 18 12:43:54 2012 +0100
-
-    Prevent attempting to modify an entry with an empty modlist (#786)
-
-commit 04076f9edd1edccf01cbc956ee880ff935effd4c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 18 10:50:53 2012 +0100
-
-    Correct command name
-
-commit bccd7c16fbc4ae1eb4aaa1dff4a4a8adbfebba41
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 18 10:50:06 2012 +0100
-
-    Set shared to be the postuser
-
-commit 58eb1a94395e5113680b31b22e821201bffdc836
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 18 10:29:12 2012 +0100
-
-    Set the permissions on /var/run/kolabd/ to the kolab user
-
-commit 2b5984074d09e517b53b993206b93c1014351649
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 18 10:18:35 2012 +0100
-
-    cache_entry is an object with attributes, not a dictionary (#784)
-
-commit 8b8ce00d11d4b75e1d735864ff462627d257c462
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 18 10:17:30 2012 +0100
-
-    Extra verbosity on the recipient policy in debug level 8
-    Add type resource to be tested for
-    Add _change_none_None() function to address traceback when attempting to find an entry type and failing
-
-commit c8db0733e61c63a298b918933eafae415833f798
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 17 13:24:51 2012 +0100
-
-    Rename search_filter => query_filter (#782)
-
-commit 050f1c8b89073b121d27ff90b885131b88e7c38e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 17 12:59:54 2012 +0100
-
-    Sleep 2 seconds before attempting to restart the httpd service (#773)
-
-commit 0061e2aab75c2509f4e0cd999723f9faa462fe94
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 17 10:25:12 2012 +0100
-
-    Resolve pylint long lines issue
-
-commit f79a60a70c8562e35033477d32c2ab70792be4b1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 17 10:24:43 2012 +0100
-
-    Update kolabd/process to set it's own name after the domain name being served
-
-commit dd014204726e24b9383939a3c362c545b4c98067
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 17 10:09:43 2012 +0100
-
-    Make as sure as possible, kolabd does not run with any non-kolab privileges
-
-commit 327d454e7ba88b8a0b50fac3be088f6fed7ddc26
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 17 10:04:29 2012 +0100
-
-    Set kolabd to run as kolab:kolab (systemd) or with daemon options --user kolab
-
-commit 1bb67edadd665af35366a07d60d61ef966c15d22
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 16 13:29:16 2012 +0100
-
-    24 characters is not the same as 25 characters (#715, #770)
-
-commit 095c5745e6d51508dd91848d2d9b85276a8cfeb3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 15 16:17:39 2012 +0100
-
-    Do not print entry_id and entry_dn for get_entry_attributes() (#775)
-
-commit a71fdfdd17cdbf1e9ef17e074ab27407ed627b5e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 15 16:08:05 2012 +0100
-
-    Make sure all services are started and configured to start on boot (#772)
-
-commit 479cbbfa20736b44d5bcf75b0ccf150801738d1e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 15 12:39:12 2012 +0100
-
-    Include a copy of the default kolab.conf as documentation
-
-commit f34bb8e3e0b37fa5f815af559a948a11b3890b24
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 15 12:35:10 2012 +0100
-
-    Set by default the ssl_verify_peer and ssl_verify_host settings to false (#751, #c19)
-
-commit 76981d741b1ae89b93dad85e32223d88ac3a82ab
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 15 09:09:29 2012 +0100
-
-    Add command add-domain
-
-commit 00388ab258f74bc0bdfab72560a6505851471334
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 15 09:08:56 2012 +0100
-
-    Prepand our paths rather then appending them
-
-commit e72a028338f99ffde982f583cdc2f506c974d534
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 15 09:08:21 2012 +0100
-
-    Fix confirmation dialog
-    Fix ask_question() with confirm=True
-
-commit a0a600b02e705b5f822ca3434e9934f4c99ad963
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 15 09:07:20 2012 +0100
-
-    Require cyrus-sasl-plain (#763)
-
-commit 47dd75bda798ee76968c0c6e7fba0ff4114c2d5f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 14 15:34:33 2012 +0100
-
-    Correct the query_filter used in local recipient maps or postfix will always find a group it may conclude is therefore a valid recipient (#761)
-
-commit f6a8abaa0233ef94850a9493d56440eec19200e1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 14 12:53:11 2012 +0100
-
-    The setting is called content_filter, not content-filter
-
-commit 15d0c430d3b7f985821c05942826786035980e27
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 14 11:59:17 2012 +0100
-
-    Add domain_add() function
-    Add more debugging statements
-
-commit 8a9e853245a10e6b6906da121d3ae1e335d5621d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 14 11:58:58 2012 +0100
-
-    Remove wap_client/request.py it served no purpose
-
-commit 63617be06a287fcba675d736eb20cbc2ec183539
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 14 11:58:01 2012 +0100
-
-    Default can be an empty string as well as None (if the default is a missing configuration value)
-
-commit deb3fd58506fbc8553ac3d52bd8a80576379d09c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 14 11:57:39 2012 +0100
-
-    Use log.error() instead of print >> sys.stderr
-
-commit 7960e263a1522142bfb845eb32ee7cbf810e14ee
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 14 11:57:12 2012 +0100
-
-    The idea is to return none, not whatever arbitrary string
-
-commit 6aefc3863a3669a261d2b0d704ff561ae387e715
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 14 11:56:40 2012 +0100
-
-    Unset add_domain from not being implemented yet
-
-commit 2f5b7c672f0794614e9b1cdcb23e333dedb78809
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 14 11:55:12 2012 +0100
-
-    Correct cmd_list_domains to use the configured domain_name_attribute
-
-commit 10dd11e96ad0bb535573953984a6e4c086d8e0bc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 14 11:52:06 2012 +0100
-
-    Correct cmd_list_deleted_mailboxes
-
-commit 1eb236d0477a9f3b1d779cf12a24002e9d353c22
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 17:34:06 2012 +0100
-
-    Remove the tests that did not work anyway
-
-commit 846511d44d65c17e9d33526c355c7d322446bd14
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 17:33:32 2012 +0100
-
-    Remove the tests that didn't work anyway
-
-commit 72199df0fed7582faccd784cae856cc3547a0a08
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 17:32:34 2012 +0100
-
-    Delete the tests that didn't work anyway
-
-commit 7e04f6ace9ca18fab5943a67d65bbc7519847db0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 17:32:19 2012 +0100
-
-    Mature the wap_client module
-
-commit 774804d674a36733db51e76ce7da2353f7d5bf2c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 17:31:09 2012 +0100
-
-    Update set_entry_attributes() to include the capability to delete and replace
-
-commit f73808f23fb87e46d8691e2bed204c0e57dc48dc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 17:30:48 2012 +0100
-
-    Update cmd_remove_mailaddress
-
-commit 417aaf699afca747ee41484a5c840a4ea4b3b2ff
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 17:30:00 2012 +0100
-
-    Wildcard %{python_sitelib}/cyruslib.py* because not all build systems byte-compile this file
-
-commit 2d9745ef2f7c58302c7045f9cef13f4b45546956
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 17:29:36 2012 +0100
-
-    Add calls for set_entry_attribute() and set_entry_attributes()
-
-commit 48d6241fd3dd8c3b776677c73837636a4d74003f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 17:07:29 2012 +0100
-
-    Correct commands referring to cmd_name
-
-commit a6ec33719ebd910aaf826132489ce014af562923
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 17:05:29 2012 +0100
-
-    Correct cmd_list_mailboxes
-
-commit 8547c0f2d92065e354986a7f53ce49098d994978
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 17:05:07 2012 +0100
-
-    Correct cmd_delete_mailbox.py
-
-commit 6b49689c5b655f4d262a1cd27956ab56ab06225f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 17:04:38 2012 +0100
-
-    Enable use of alias commands with cli options
-
-commit bdaefc9e82e48f683c0a4a6f527c327cbc18ba65
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 17:03:29 2012 +0100
-
-    Correct cmd_create_mailbox.py
-
-commit a2dc01ba14aa4cbbef81f5438fa748c4ac14a436
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 13 16:52:24 2012 +0100
-
-    Add Auth function get_entry_attributes()
-
-commit 0c934737995fa5633e7790230c0783b7dd7e0587
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 12 15:17:43 2012 +0100
-
-    master branch is deriving from pykolab-0.4, so bump the version number and set the pre-release release tag
-
-commit 6ea8339291d8739c145144e6bee3d3873e6b91a2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 12 14:50:42 2012 +0100
-
-    The LDAP setup component should ask for confirmation and allow the alteration of the domain name space and root dn used (#716)
-
-commit 9d1e262bc890ed664069332f6f6000d061ff571e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 12 14:39:25 2012 +0100
-
-    Make utils.multiline_message() prepend and append a carrier return for clarity on the console
-
-commit a31e53033bb2923e2743d3045c036b9e9df25f9e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 12 14:15:44 2012 +0100
-
-    During setup, scratch the des_key setting for Roundcube (#715)
-
-commit bcd2b2fdf90bccd29c281f8143bc9ba73edda01d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 11 16:27:28 2012 +0100
-
-    Do not echo passwords back even during confirmation
-
-commit 43cb3e58da39fd7c7566d952691d815488104dd6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 11 16:05:45 2012 +0100
-
-    Initialize Auth() after the configuration has been finalized.
-    Fix the kolab smtp access policy using legacy API calls
-
-commit d63495232db482983fcc26d5f3924f260c58f4e1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 11 11:52:27 2012 +0100
-
-    Add SSL settings for the Kolab Web Administration Panel (#757)
-
-commit 21dd69ca0531b507f4d9a2936acab726613d4c40
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 10 19:51:31 2012 +0100
-
-    Set inet_interfaces to 'all' for Postfix's main.cf (#754)
-
-commit 459341b61a569b988acc2a3b7e8584f72dd1d88d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 10 16:47:08 2012 +0100
-
-    Re-enable caching (#752)
-
-commit 280425b764f4d9524251904d69dc559cba2f3838
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 10 16:39:52 2012 +0100
-
-    Add back the cache.get_entry() routine
-
-commit 119c93df239dfbb451662e1e6cef2ee53129dd54
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 10 16:39:08 2012 +0100
-
-    Do not attempt to create a mailbox if no value for the result attribute we're looking for exists (#750)
-
-commit c1bb1dd576a8d6791986da8aaf1517cd8bae225a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 10 16:38:07 2012 +0100
-
-    Correct cache.get_entry() use of strtime (should have been strftime) and Python native datetime objects (we were passing the literal string)
-
-commit 86fbc965b3bd9c845d5d0efcc014e4ebff300f87
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 10 16:17:12 2012 +0100
-
-    Rename the 'example.org' section to the primary domain having been set up if appropriate (#750)
-
-commit 9f203fc1820c2a2d3630b4a8d62036fcaaaa6887
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 10 15:25:31 2012 +0100
-
-    Provide required function for multi-line messages while keeping the source code somewhat clean
-
-commit 835bc71f09aa0c56737499fd9e97a265abc46e6b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 10 15:24:20 2012 +0100
-
-    Add verbiage on what accounts and what passwords we are asking for (#738)
-    Ask for confirmation of passwords (#748)
-
-commit 167d20723f7033014de09049266c42f1c2bd465a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 10 14:41:16 2012 +0100
-
-    Allow utils.ask_question() to request confirmation of the input
-
-commit c06a170dc7a8c0f91b58d4a9a5b2fc5900438b55
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 10 02:04:24 2012 +0100
-
-    Exclude %{_bindir}/kolab-test
-
-commit 09f40898174ec24e8cbbd7e96afde7faa20bd788
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 9 14:26:07 2012 +0100
-
-    Update po files
-
-commit 14bd17f4c4acba558628f13418060ae6e7802b36
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 9 14:25:54 2012 +0100
-
-    Update script to update language files
-
-commit b2b60e26d5915cf50160f8044a4f27c7f77e6470
-Merge: 3d94ae6 63acf78
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 9 12:00:00 2012 +0100
-
-    Merge branch 'master' of ssh://git.kolabsys.com/git/pykolab
-
-commit 3d94ae66d7d8eca5e516c45d59d878d214843f7e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 9 11:58:44 2012 +0100
-
-    Return a timestamp according to the format required
-
-commit 73e71902fe8f27cbb25d5a62f01c417bb84c3432
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed May 9 11:57:13 2012 +0100
-
-    Correct the handling of Paged Results, and be somewhat compatible with Python LDAP 2.3 while doing so.
-    Make sure the preferredlanguage attribute is set either to the attribute value obtained or the default locale configured.
-    Correct handling a missing set of mail_attributes if they lead to non-existent secondary mail address attribute names.
-
-commit aa923c4abf0562a326bd10700f6eebe58bf3a3c0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 8 21:56:50 2012 +0100
-
-    Vastly increase the debug verbosity on level 9 (trace), as the lack of SQLAlchemy plus dependencies goes over silently.
-
-commit 63acf78a4961f78034baf88e9ea8fed83f459bd1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 8 10:25:02 2012 -0400
-
-    Remove the imports of legacy auth and imap
-
-commit e0326b2e0d7b9fb88592baf7dc1991bd4d35a0e6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 7 01:03:08 2012 +0100
-
-    Configure the kolabd service to start on boot (#725)
-
-commit b9eb14cf4f34a279d33c56464fb8688c75d36ace
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 7 01:01:30 2012 +0100
-
-    Remove ChangeLog (#726)
-
-commit ae9c91f4afa9e26eebb5a2f4a8288d9dd43fb232
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon May 7 00:59:38 2012 +0100
-
-    Add ChangeLog to .gitignore, it is generated
-
-commit 4425c58b3de6a89acace9c15c97714ad0ff4011b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 6 17:57:04 2012 +0100
-
-    Release 0.4.0-1
-
-commit a6e0cdd6eee09dfe6b5da6ba5a5f673556d4a661
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 6 17:56:24 2012 +0100
-
-    Use correct variable name for freebusy template
-
-commit 7007aea484e33ba130594c42c876cd10eba9a469
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 6 13:41:25 2012 +0100
-
-    Bump pre-release
-
-commit e9cb83fec2eb700e530df77ec0b32dcbf9e3cf99
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 6 13:41:06 2012 +0100
-
-    Correct variable name
-
-commit 66cb2b091c3e59abc5aa9fc413f059b6837b6deb
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 6 11:53:35 2012 +0100
-
-    Bump pre-release
-
-commit 3507c91d8308870637245e54e6d8acec1208ca53
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 6 11:53:10 2012 +0100
-
-    Correct duplication in setup_freebusy
-
-commit 9bc25577dfaa1235b6971affe8bd9f566ea261e9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 6 11:52:20 2012 +0100
-
-    Add fbtemplate_DATA
-
-commit 0c060b48212616874bc2984e67509fb4989c1d1e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 6 00:17:52 2012 +0100
-
-    Bump pre-release
-
-commit a71c738585d0d169f5e03f8e51296f9d89cff933
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun May 6 00:17:19 2012 +0100
-
-    Correct paths for freebusy configuration
-
-commit 06cf3d5976d3a495d2ccce1b71bddc2465368bba
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 20:31:47 2012 +0100
-
-    Bump pre-release
-
-commit cf383257f7abe863ddca8eabb20464409c7f0e53
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 20:31:16 2012 +0100
-
-    Correct running in unbuffered mode
-
-commit 168171fc34e65879fd6d25a9e4795caabc0e0af8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 17:11:45 2012 +0100
-
-    Bump pre-release
-
-commit 0a151c662c67c17cffeee7e80e04a6348f0516af
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 17:11:07 2012 +0100
-
-    Add freebusy and zpush setup routines
-    Restart httpd server rather then starting it
-
-commit b3ff42571c0edab8e5b3c064ba3a488a1b534bab
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 17:10:23 2012 +0100
-
-    Truly remove any buffering that may exist
-
-commit 0d0a51065a6780dc40c21ff4250f6cb6b7db7896
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 15:44:03 2012 +0100
-
-    Bump pre-release
-
-commit 7f9167d2726d7cc48c85fcc36c06ea5a6db80add
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 15:43:11 2012 +0100
-
-    Add rebuild.sh.in to GIT
-
-commit 3912777a8cb8e5a0a2bd6eb48069095c5e3ce205
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 15:28:32 2012 +0100
-
-    Bump pre-release
-
-commit a7113ee384f490df83ef0ecf41df94eb58755a69
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 15:28:04 2012 +0100
-
-    Add a rebuild.sh for my own personal convenience
-
-commit 5fe4069058cc921c6183f3184bd91ea5a9b35ea9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 15:27:13 2012 +0100
-
-    Correct variables in zpush configuration template
-
-commit a355e652a7b0d271247dfdf9304c00e8814465c4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 14:12:21 2012 +0100
-
-    Bump pre-release
-
-commit 5ee3071696cdde66a26b8366b1b99ff0d6f307fe
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 14:11:02 2012 +0100
-
-    Correct smtpd_*_restrictions referring to a variable that is going to be expanded during parsing
-
-commit af9a357a6b13874ec6e1ccf30da00ef091a1d6d6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 14:09:55 2012 +0100
-
-    Flush stderr and stdout when asking a question
-
-commit 62c419ed0ccac9faa4b3ce4afb7daaaaf43236c7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 13:12:48 2012 +0100
-
-    Bump pre-release
-
-commit 10050ea8c4393e7a79ed0844757259b7224911b4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 02:12:00 2012 +0100
-
-    Add freebusy configuration file
-
-commit 36db38827d97a769e92a01727389a47491034577
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 02:04:57 2012 +0100
-
-    Add zpush configuration file template
-
-commit fa8610f4ac59b448cc5516a6eedc2386cddcff08
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 02:04:23 2012 +0100
-
-    Ship extra setup routines
-    Ship extra template files
-
-commit be0ef5a68ffc3ece17acb0a6a3df281375789040
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 02:03:46 2012 +0100
-
-    Add the submission service to postfix/master.cf.tpl
-
-commit b73cc1c23ac6e40ac9883b476bb3f69739120342
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 02:03:24 2012 +0100
-
-    Add basic kolab configuration template
-
-commit fbdb316b766747004dc7f17a9dab1098211105ab
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat May 5 02:03:09 2012 +0100
-
-    Store the mysql password for user roundcube in conf
-
-commit 9090cfaf49bb7bd73ef8a54c90e7607338749ab4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 18:26:16 2012 +0100
-
-    Set correct certificate paths to a freshly generated dummy certificate
-
-commit eb0e0cb4e81d5daf9f2d78fcc02ce2d788164acd
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 18:19:08 2012 +0100
-
-    Fix another typo
-
-commit 844c99635e5f449e44cf51f7ef2e8595cb3132f5
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 16:46:47 2012 +0100
-
-    Bump pre-release
-
-commit 410bf5dca72d3079c276d3dd9b6a017e5dcbd972
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 16:46:33 2012 +0100
-
-    Lint issue
-
-commit ce08efd8fe57d7a8b359f26b265c0a1891c71f31
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 16:35:46 2012 +0100
-
-    Disable plugin terms by default
-
-commit 31c00e8ab2c9252c05d655fa3430b6692919a595
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 16:30:37 2012 +0100
-
-    Add horde_cache to sql schema files,
-    prevent duplicates
-
-commit 6ef876162465a0e8ca6f7ec2da21eb87f007a931
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 16:23:43 2012 +0100
-
-    Remove print statement (#721)
-
-commit 0cd026f71ac18945c9015d709cfe8b92f6e90e18
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 16:18:54 2012 +0100
-
-    Bump pre-release
-
-commit 87526c424771516dffa5d726425ef557914b236b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 16:17:53 2012 +0100
-
-    Correct typos
-
-commit 4fa4da38d3d8ecdc0aee090605aaa5ea0e0de0bc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 16:17:04 2012 +0100
-
-    Actually set entry attributes
-
-commit 193061bb0bbdfdac9fa537371f5fd395cf9cf5a4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 14:04:59 2012 +0100
-
-    Bump pre-release
-
-commit 79958158335ff95370f915ed55bcf04028875e43
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 14:04:15 2012 +0100
-
-    This is where the actual default should come from, but pykolab/base.py:def config_get doesn't take into account the defaults
-
-commit fff443ef7205c03ee51747414b1ca6f686e212a0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 14:04:00 2012 +0100
-
-    Make sure a default mailserver_attribute is set
-
-commit 45c5bea87be934124f92a08333541e0c80e8fd04
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 14:02:12 2012 +0100
-
-    Use the default theme
-
-commit b863d25bc9570bbf0d0d4258ff979fb6301d2b53
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 01:01:31 2012 +0100
-
-    Bump pre-release
-
-commit edb5a0145ff597793b9bc0134647317ed1ad365a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 01:01:07 2012 +0100
-
-    Also require python-cheetah
-
-commit 7778863a0fe5ed03460ba7ed3226de1c6737e36f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri May 4 01:00:49 2012 +0100
-
-    Include more components to setup
-
-commit 70c329e6295ace7eaf05816cd9ec2769452b7b17
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 20:42:16 2012 +0100
-
-    Add more debugging
-
-commit 0b652a20ed2580a8e2d35339f68fdf3a27c4f3b6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 17:51:26 2012 +0100
-
-    Bump pre-release
-
-commit bf6b66e1038231f65cb991e190b1ae4b79cc60f0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 17:51:04 2012 +0100
-
-    Correct cache_entry call
-
-commit a256037e35128c30360c6a5ad5718045e1e85386
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 16:05:16 2012 +0100
-
-    Bump pre-release
-
-commit a8f9b177b728908dc2257f94f3e184ea69f3793a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 16:04:55 2012 +0100
-
-    Correct the use of mysql commands and debugging
-
-commit 834589fb53548e58a02ea02dce67011a8a4a806d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 16:04:34 2012 +0100
-
-    Set the MySQL root password
-
-commit b5aa2db0c05416f2a3ff4fe7f580efcdcf238535
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 16:04:08 2012 +0100
-
-    Import Template from Cheetah.Template
-
-commit e6718ddec843f91f44f0fff42e522685b0224547
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 16:03:36 2012 +0100
-
-    Add kolab_wap section
-
-commit 16293b6e69836c8853570cf1ba1b1a55cade5d39
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 15:03:44 2012 +0100
-
-    Bump pre-release
-
-commit a2905078b8e065ff61f5159fe141c180242ff302
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 15:03:12 2012 +0100
-
-    Add apache user to the kolab group
-
-commit 4892e46650a58f4fd9f206217005316537da8e03
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 15:02:17 2012 +0100
-
-    Correct permissions for /etc/kolab/kolab.conf
-
-commit d9375d2be9348831f588b6cf8c074a6e43a592df
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 15:01:57 2012 +0100
-
-    Add deploying master.cf
-
-commit c34d64f3b56353c2c46ffccbf423a40627fe4f3c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 15:01:24 2012 +0100
-
-    Add a template for master.cf
-
-commit 58f832ae12ab54acef7ed6b2576f461ecb62e29a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 13:24:59 2012 +0100
-
-    Bump pre-release
-
-commit 2843fdb8bf71aef985b00592ea0f88d4e719b264
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 13:24:32 2012 +0100
-
-    Adjust autofoo for the new templates
-
-commit c2ee99f72e5d683d1e3e88d5a0b68dca1943460d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 13:24:11 2012 +0100
-
-    Use the Roundcube templates in setup_roundcube
-
-commit 4a5c8e92a390dba483a9ff58d6b7a3005014f0b6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 13:23:58 2012 +0100
-
-    Add Roundcube templates
-
-commit 6764a33c367188f5aa0eb5e9a682797e8cc7b149
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 11:19:42 2012 +0100
-
-    Add cyrus.conf and imapd.conf templates
-
-commit b152dd98b3a53ae3b91474e36eea50145a2b0649
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu May 3 11:19:12 2012 +0100
-
-    Use templates for as long as Augeas does not ship lenses for /etc/cyrus.conf / /etc/imapd.conf
-
-commit 8fe7ac01670efa64aa7ae895cd1fec8947d00de8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue May 1 11:54:57 2012 +0100
-
-    Require python-augeas for kolab-cli package which includes the setup procedures
-    Bump pre-release
-
-commit f1f955530e8d8b9398e9ce045b64a695bd9e75c0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 27 15:24:34 2012 +0100
-
-    Bump minor to 4, establishing version series 0.4
-
-commit 5d2036cd7d3ecb6d44ed1a54f4835fb85a067696
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 27 15:22:33 2012 +0100
-
-    Use the configured administrator login
-    Correct some of the options set in /etc/imapd.conf
-
-commit 1ab25276c9b0425ac638ab0935a8c5d30d699048
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 27 15:22:16 2012 +0100
-
-    Use the configured administrator login
-
-commit f2d68e09b3b536159a4929b5e0a812a018cc477d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 27 15:21:40 2012 +0100
-
-    Use self.m over imap.m
-
-commit 3bcd24035724cad66dd989a0007407d3a037c037
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 27 15:02:34 2012 +0100
-
-    Simplify use of caching
-
-commit 7735e7549ffee28d279d5cd49008c4095aca56b8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 27 15:00:10 2012 +0100
-
-    Correct the comparison of potential secondary mail addresses with the known primary mail address
-    Make use of caching so we can maintain some sort of state in between restarts
-
-commit 80e68deaff4f6bfa9875b6733c9cd7f9068b2ac8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 27 14:59:36 2012 +0100
-
-    Add auth/ldap/cache.py to the dist
-
-commit c093465b37658350e00a488492219b634f9558df
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 27 14:58:56 2012 +0100
-
-    Add a local sqlite cache layer to track when the daemon last synchronized, and what the last state was exactly
-
-commit 4054fb9435ec9e95f89d90e3794caed251071ab7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 24 15:46:42 2012 +0200
-
-    Add kolabd and mysql setup
-
-commit 06ceb84a63d38cc2ab238c8a24efeb8c66f2a57b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 24 15:46:29 2012 +0200
-
-    Bump prerelease
-
-commit 281e9b2eb9847bab32e12bd2ff796c897866f895
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 24 15:46:10 2012 +0200
-
-    Set the default for imap_virtual_domains
-
-commit c178883c4220c0cea8736b758d5ee82f445457ad
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 24 15:45:46 2012 +0200
-
-    Correct the authentication function
-
-commit 9d6b584e7826c0586895d974f91fd69dae645cd0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 24 15:45:05 2012 +0200
-
-    Connect the instance of Auth() or authentication will fail
-
-commit 934359775551443e95ecf67978dec07b86377478
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 24 15:10:14 2012 +0200
-
-    Allow domain=None to be passed to Auth()
-
-commit 00cfbaceebb863148b21f62af2d9c7acd89f1fa3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 24 15:06:25 2012 +0200
-
-    Admins include cyrus-admin, not cyrus-imapd
-
-commit 733b7119c192673e950dec81bdbad22feba4ad0d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 24 14:47:56 2012 +0200
-
-    Write out the configuration file to the default location.
-    Start the server after setup.
-
-commit 0d474191803e5be746e0fedefa1683cb6cb7a1b8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 24 14:47:32 2012 +0200
-
-    Use domain_filter over kolab_domain_filter
-
-commit 132e781c8741029624913a965472307128456de4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 24 10:27:59 2012 +0200
-
-    Add --silent to the options passed along to setup-ds-admin.pl
-
-commit d6306920bfcf1ca4342666be289096b83774af3f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Apr 21 18:05:06 2012 +0100
-
-    Supply some inline documentation in the default configuration file
-
-commit 9b8cc5b6819b2fe576d0fbe2a07e6da859bf76da
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Apr 21 16:00:07 2012 +0100
-
-    Update pykolab.spec for Fedora vs. Enterprise Linux installations (sysvinit vs. systemd, to be more precise)
-    Install the Wallace init scripts
-
-commit 9244a6c54b09fa841369b7aea26a201adfd10437
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Apr 21 15:59:19 2012 +0100
-
-    Allow overriding the fqdn and thus hostname and domain name used by adding --fqdn
-
-commit 8f4dbeeaf917f4fb6fa4cf693ab131fa444144ed
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Apr 21 15:58:11 2012 +0100
-
-    Allow setup components to add cli options, and suppress sequencing output
-
-commit 0eab2f43ac6bcfb72b1f8fb970376aca11d2d328
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Apr 21 15:57:28 2012 +0100
-
-    Install setup-kolab script
-
-commit 3a1ab1fb04fc2030776ad22d845f3c0c6ea77ace
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 20 11:46:34 2012 +0100
-
-    Correct condition
-
-commit a752c475cda8cbb3b16a6204123810990f764488
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 20 11:44:18 2012 +0100
-
-    Update installation and %pre/%post installation routines
-    Move CLI components to kolab-cli package
-
-commit 1ec0bdeddb9919ab66f0f35248ccd36964135229
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 20 11:34:04 2012 +0100
-
-    Install systemd unit files for Fedora > 15
-
-commit 07f108b041d21880d6d1fababb78d1c33b447f1f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 20 11:33:34 2012 +0100
-
-    Rename wallace system files back to the intended names
-
-commit 77d3804884bd6fc13182ec26f8d2d447cda3be61
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Apr 19 17:00:20 2012 +0100
-
-    Rebase on specification
-
-commit 1a2d4b809307316a59961811d3f252e0b50477fe
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Apr 19 16:58:46 2012 +0100
-
-    Add systemd file for kolab-saslauthd
-
-commit 5d4c3e69fd9ed03703f2ccc7feb46396f0e6bad9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Apr 19 16:57:56 2012 +0100
-
-    Provide some preliminary setup.
-
-commit 98237c3fa335d54469f435761689be2b7a4cbc8a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Apr 19 16:57:13 2012 +0100
-
-    Merge
-
-commit 0a993d4b3c0b3afe76ed07d177b891791f6ae94f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Apr 19 16:56:16 2012 +0100
-
-    Add kolabd systemd file
-    Refactor process management in kolabd
-
-commit 9663ff263d90af9156112f46c9d7b1651664cb0f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Apr 19 16:55:14 2012 +0100
-
-    Wallace: Add pid file option and make sure we write it out and handle signals
-
-commit 940d3985175be8ba977faf5559800963c81c64d6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Apr 19 16:55:00 2012 +0100
-
-    Add the sources for Wallace
-
-commit c4581c05b1b7667d655b23612000d21fa700bfd3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Apr 19 16:54:31 2012 +0100
-
-    Add sysconfig, systemd and sysvinit files for Wallace
-
-commit 20b093ae09b9ad78c53141af958b129bdcc69cb7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 17 10:08:44 2012 +0100
-
-    Bump prerelease
-
-commit 1462a29b9667af47c587e2b90648ed4106e53b7c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 17 10:07:57 2012 +0100
-
-    Prevent kolabd from having started too early, and not being able to connect to Cyrus IMAP, from defuncting the entire daemon
-
-commit 3527dc014a687c16c3794fcdb20c7e5f076f450f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 17 10:00:18 2012 +0100
-
-    Bump pre-release
-
-commit 73776a82589d28257f06ab84bb872ab89c83ef7c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 17 09:56:11 2012 +0100
-
-    try/except setting annotations on folders (#705)
-
-commit c62189144721d0c8aa7e8a37f75eaa45fcb0735f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 17 09:49:25 2012 +0100
-
-    try/except getting a user's attribute (#706)
-
-commit 38a66012ac40ba0d984609b9eb9522f10f768daf
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 16 20:18:29 2012 +0100
-
-    Update default configuration
-
-commit 98b57c8b67776bd9b6725c56a5362f114340692e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 16 17:21:17 2012 +0100
-
-    65 is too early in the boot process
-
-commit 673a04c3b6d651ab115546384530861e17b9d672
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 16 13:55:51 2012 +0100
-
-    Bump pre-release
-
-commit 8dab42441b813631306bc27282288dcd2277bb1c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 16 13:55:27 2012 +0100
-
-    Remove requirement on python-ldap >= 2.4, and use any python-ldap available
-
-commit 7a035d583d3c8cd961fb7881c86ce3769bab4e5d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 13 12:48:37 2012 +0100
-
-    Bump pre-release
-
-commit 9422f2cc8899c74e09f1dc047d049a74e72da283
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 13 12:48:13 2012 +0100
-
-    Fix some mistakes in the previous commit
-
-commit 8c6f0209bb5cef9be92cc6ef794397e2a2e6d313
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 13 12:33:39 2012 +0100
-
-    Bump pre-release
-
-commit 6bcf448d8ee1a9a542d7798c39a68d1be604c61f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Apr 13 12:33:10 2012 +0100
-
-    Allow the Kolab SMTP Access Policy to consult groups as well
-
-commit bc0af8397060e65a265bc9ce22df17b1353bf436
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Apr 10 11:20:26 2012 +0100
-
-    Silence the stdout logger if it can detect we're meant to fork to the background
-
-commit 316771abdd0a9be7010936081d3b1fec900a5884
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Apr 8 15:07:09 2012 +0100
-
-    Bump pre-release
-
-commit b1fd2589c6a80cd834d5e5d8b5512021a83cc615
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Apr 8 15:06:38 2012 +0100
-
-    Only make integers become a string on modify
-
-commit b43779a966d238a3ebf657aa0a9f36d7ee4a339f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Apr 8 14:46:54 2012 +0100
-
-    Bump pre-release
-
-commit a9adfa55489f5985f03273e99560218c5a267a13
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Apr 8 14:46:25 2012 +0100
-
-    Use current_server, not server, as server is undefined in this context
-
-commit 996d7a9a433ac7290fecb5bf342361784de810f1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Apr 8 14:42:08 2012 +0100
-
-    Add TODOs to setup_ldap
-
-commit 913fc968c506aef006c32cec592aa9ab8bf2f174
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Apr 8 14:41:43 2012 +0100
-
-    Include relevant setup components in the dist
-
-commit 0123d55d358731119c57d3a7e4269c30691fe830
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Apr 8 13:49:20 2012 +0100
-
-    Correct macro used for the sysvinit rc.d directory
-
-commit 2992ee8ba598d24b54d9d7eabaff603d67132470
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Apr 8 13:41:36 2012 +0100
-
-    Bump pre-release
-
-commit 4b7299189dbbd1e4825c67b64a11301497a2fa08
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Apr 8 13:40:45 2012 +0100
-
-    Insert TODO
-
-commit 4090928dcf5aa57933b7b265c661f809eae83671
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Apr 8 13:39:44 2012 +0100
-
-    Connect to the new server using the template for the original uri
-
-commit 720c111b46bc4c558e93d752cf6152a588536d8f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Apr 8 13:39:32 2012 +0100
-
-    Use the configured quota attribute
-
-commit 07ef012ce1660979b53b8b383c19444f164bf50b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Apr 8 13:34:11 2012 +0100
-
-    Correct adding back in an attribute
-
-commit 1e8c12a01a6be9a0b4b48ebbfb13048a6d11f3bd
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Apr 8 13:10:51 2012 +0100
-
-    Do not reconnect to get an annotation
-
-commit ecf63205e0538ddbaac083b61dcbcbf0c4623b80
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 20 17:50:54 2012 +0100
-
-    Update wallace to comply with some pylint warnings/errors
-
-commit 18f35345380722f87416ff8d021a4dd133af19db
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 20 17:50:14 2012 +0100
-
-    Do not include a password in source code files
-
-commit 065149af2ea917f5056dcb82140ae7d87bc084b4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 20 17:49:39 2012 +0100
-
-    Evaluating args this way doesn't make any sense (it's not used anywhere but in setup anyway)
-
-commit 3322a02b5e6240f754cce529bc3ae331a1c18bac
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 20 17:49:08 2012 +0100
-
-    Add utils.generate_password() for setup-kolab.py
-
-commit 796413f66f681d6735245f99fcb2c7c082f749de
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 20 17:48:41 2012 +0100
-
-    Implement a version of setup-kolab.py around 389 Directory Server
-
-commit 812920a2077860091bd003956fdf4296d187b329
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 13 16:17:34 2012 +0000
-
-    Split out connect.py and request.py
-
-commit 3ee814c43398756b1756628ab8e1f9d09e1acec6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 9 11:33:12 2012 +0000
-
-    Correct the use of envelope_sender (this is a list??)
-
-commit a1d61b59186acf4e148baae656df86556f575b9e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 9 11:33:00 2012 +0000
-
-    Simplify the use of email here as well
-
-commit c7a80b9e38b4313a2f589031462575c2093eecc9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 9 10:49:31 2012 +0000
-
-    Simplify the use of the email library by importing only the correct things
-
-commit 2354a1c857b163bda603f19956122a539e2b4a12
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 9 10:40:32 2012 +0000
-
-    Correct the port to be 10026
-
-commit 8f4e77a6488d9d286d83eba6712134354ddad93c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 9 10:38:37 2012 +0000
-
-    Correct some pylint conventions
-
-commit 107f91157704dbc5b6b7054cf420da5ef651027f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 9 10:38:13 2012 +0000
-
-    Correct some pylint conventions
-
-commit 61714a5e0d99ba1bc08eeac7f0ead106d72abae3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 9 10:37:49 2012 +0000
-
-    Correct some pylint conventions
-
-commit 0ae2417b2c4a614fd70c512b1283be37dd0c31dd
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 9 10:34:47 2012 +0000
-
-    Correct some pylint conventions/warnings/errors
-
-commit 02a9568915ea6017e887cb835b20888d6a30b73d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 9 10:33:44 2012 +0000
-
-    Correct some pylint conventions/errors/warnings
-
-commit fb76e19ce360ef9cbc3e9b506ad44046e511e363
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 9 10:32:59 2012 +0000
-
-    Add bin/ commands to pylint,
-    Make the list of files and directories to check a little more readable,
-    Escape the return code for pylint.
-
-commit 9867e7503682709ee25375eabf0f54b12acc738d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 9 10:22:44 2012 +0000
-
-    Execute and include pylint.log in the distribution tarball
-
-commit f213cbc49d412ab4ebb3d2ea4932be52756f5228
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 9 08:51:14 2012 +0000
-
-    Replace the use of httplib with urllib
-    Do not re-spool deferred messages that were already deferred
-
-commit 2cb4a47d99dcd55db0db3fd11d63d3c9e6a2962a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Mar 8 10:34:20 2012 +0000
-
-    Allow -b/--bind and -p/--port options to be specified on the command-line, for greater flexibility.
-    Move the standard port to 10027.
-
-commit 5e7fdbb97435fd823290c4040f01d1fe8481b9f7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Mar 8 10:03:20 2012 +0000
-
-    Fix the empty recipient inserting at the data request state
-
-commit 4daf6124d0a72fe8227d3b9e6035e7050e550f6b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 6 10:41:54 2012 +0000
-
-    Update Makefiles
-
-commit 372eb6cdd8396be35bb86ec145c4881ff393c76b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 6 10:28:32 2012 +0000
-
-    Remove zpush tests
-
-commit e3a60392c58e0fb0902dfc2d3ff8299315be9e5e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 6 10:27:52 2012 +0000
-
-    Update the inclusion of tests files
-
-commit 3f8322c7e87c798c45f77098db400c78e6a6b677
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 6 10:16:42 2012 +0000
-
-    Bump prerelease
-
-commit 13f6d51d1055cd0feff46f348de9cd81f8755e05
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 6 10:16:11 2012 +0000
-
-    Add search_users() to Auth as well
-
-commit c201bf1264122105a201b68db7aa7d6843dafb90
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 6 10:15:53 2012 +0000
-
-    Fix typo
-
-commit 9e4ca546531e36916121e12d4f68d2256592d8f7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 6 09:29:37 2012 +0000
-
-    Start counting at 1 for secondary addresses as well
-
-commit 1779104d7e23b481a52ce5ec3c54c268401ea62e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 6 09:29:04 2012 +0000
-
-    Start counting at 1
-
-commit 708a3703149943febe0b086281c7e16d97c681a3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 6 09:28:29 2012 +0000
-
-    Allow overriding the base_dn for find_user()
-    Add search_user()
-
-commit 91102c4fd11e4f4f4539bb1522d32d306e1cd904
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 2 15:49:04 2012 +0000
-
-    Add the wallace run code
-
-commit b481dac3b79ed078879516d1d720448e3591d138
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 2 15:48:33 2012 +0000
-
-    Add kolabd.sysconfig
-
-commit f68403e44926e0ea3cbcf4f6f153aedade5b8dec
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 2 15:47:38 2012 +0000
-
-    Update kolabtest.py to the new test suite semantics
-
-commit 219e2a96d15e867b220cc92ee91a03ede0984cfc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 2 15:47:14 2012 +0000
-
-    Add the bare bones of Wallace with the optout module
-
-commit 2d7c188c7bea6932918d74715c32b2575358dd4a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 2 15:46:35 2012 +0000
-
-    Redo test suites
-
-commit 3533710ef014bf541daa2d0107bae8b34a8e9a20
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 2 15:46:00 2012 +0000
-
-    Add additional commands
-
-commit 3334c2ed460ef138f1ed3a9f3e01c2cc6ab24531
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 2 15:45:29 2012 +0000
-
-    Convert command list-domains to using the wap client
-
-commit 00d655a36452fd023062ae5cafe2080c46f79441
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 2 15:44:56 2012 +0000
-
-    Add the command-line wap client
-
-commit 5c3cb04cbc195d6e20824cb80fa12173623eb9db
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Mar 2 12:48:59 2012 +0000
-
-    conf.get_list() should always return a list
-
-commit ca23a3074be34a28b1595e9db167b7a6f7459645
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Feb 24 13:40:29 2012 +0000
-
-    Do not reset the retval for each plugin
-
-commit b3d17f8b87a9b9a9864ec701bbf3d2105f613914
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Feb 24 13:28:52 2012 +0000
-
-    Bump prerelease
-
-commit 8e8f0ce73e30e07f6edc9089bdc8f3445fbc57bc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Feb 24 13:28:26 2012 +0000
-
-    Remove additional print statement
-
-commit c81b96a5c629dc20cc4a79eda9f124e78f807ea6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Feb 24 13:22:17 2012 +0000
-
-    Bump prerelease
-
-commit a20f3891f03a8509fd5f23025fb945995bcdde18
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Feb 24 13:21:59 2012 +0000
-
-    Do not solely support syncrepl (this is a development thing)
-
-commit ec88785a50e045fced5ed7f86efd0c6e91fc7c61
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Feb 24 13:21:18 2012 +0000
-
-    Mandatorily add uid to the list of authentication attributes to search for
-    Start on sync_repl support
-
-commit bab75f963d922fdbac6b86290f29312d74763c09
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Feb 24 13:20:58 2012 +0000
-
-    Remove print statements
-
-commit c62ce1d095ef694de120867555de692a54b5acd6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Feb 11 14:43:17 2012 +0100
-
-    Add user parameter to be passed to the dynamicquota plugin
-
-commit 57a618ec992e77e83aa4894fcc3431f83db119c8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Feb 11 14:42:47 2012 +0100
-
-    Always return a return value, by default None, and only after all plugins have run
-
-commit b81fd0b37408891a312483242d90ac82e112ce04
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Feb 11 14:41:48 2012 +0100
-
-    Pass the user along with the dynamicquota plugin, so it can recognize policies based on roles
-
-commit 159ec790e8fb0870f07a245bc36342feb57f22aa
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Feb 11 14:41:05 2012 +0100
-
-    Set the return value for "no setting" to None, not an arbitrary default value
-
-commit 01efa922ba167e930ed426c610d30ff3cfd4ae6f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Feb 11 14:38:26 2012 +0100
-
-    Test for self._auth, but not as a dictionary
-
-commit 0424098e4173f44bd206ccb89c24e62545977f7c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Feb 11 14:36:04 2012 +0100
-
-    Correct indentation to match check on whether attribute on self exists
-
-commit 65b0905032e99caa7a16866f6b6a1f89400b0dc6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Feb 11 14:33:28 2012 +0100
-
-    Flush stdout/stderr
-
-commit 94dc3f68914a9aaf3d2441f90b2577afde05cf4b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Feb 11 14:33:01 2012 +0100
-
-    Catch sqlalchemy API incompatibility
-
-commit 5fa5c3d1cf2cb04e96d47efa4bfcfcc0104e6834
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Feb 11 12:39:20 2012 +0100
-
-    Add stub imap_setup.py
-
-commit 60fdb600d147557cd6c0fc2a530e9c54dd22f05b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Feb 11 12:37:10 2012 +0100
-
-    Bump prerelease
-
-commit 2b94311d874a35a78acc44a0546fea50b62e2c7c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Feb 11 12:36:42 2012 +0100
-
-    Add kolab-cli package contents
-
-commit adc24c02eb542c3032e072e09ed5c20cc0db94d1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jan 4 13:14:50 2012 +0100
-
-    Update copyright
-
-commit 6570fb06a787f3b3bf59d40e412105c0a9f4eedc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jan 4 12:29:49 2012 +0100
-
-    Don't forget to try/except importing the Entitlements class, and then only fail afterwards
-
-commit 84b58bf324226ac321cee8726bb46d864318cb9e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jan 4 12:17:26 2012 +0100
-
-    Add the framework for entitlements (there's no enforcement yet, but initialization fails if data does not check out)
-
-commit 9cf635005cd404c095d59f742fd44c7f9cf989e0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jan 2 14:33:04 2012 +0100
-
-    Update .gitignore with backup files and swap files from Kate
-
-commit f452173ce0c152cb4c2eb909f3378b13fba74f2d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 6 17:54:13 2011 +0000
-
-    Bump prerelease
-
-commit bca1ca59aeeed0c52ed47a5ade47e0288a54b729
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 6 17:53:48 2011 +0000
-
-    Fix typo
-
-commit 9155e3c4c2415389200ba75cea846e8e5ee766ae
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 6 17:33:21 2011 +0000
-
-    Bump prerelease
-
-commit 76109c3c16fc5b6bf163eae0d2a21085bfcfcc8b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 6 17:32:40 2011 +0000
-
-    First translate, then lowercase the mail attributes.
-
-commit 4658e8acdbb17c67f3b84e412ee37c810c3af549
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 6 17:32:11 2011 +0000
-
-    Fix "automatic" reconnecting should the connection timeout / cease to exist
-
-commit 56a66d16532896d9b93be9fe0806a8b18a7c2bda
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 6 17:27:11 2011 +0000
-
-    Update obtaining the preferred language for a user
-
-commit bdd6e6a28d45bb909aa75140a1bd6316556f7903
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 6 12:44:23 2011 +0000
-
-    Bump prerelease
-
-commit 339ca6bddefc166c487ecdd4092f9f34b274ff7f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 6 12:43:57 2011 +0000
-
-    Update default_locale setting (default and obtaining)
-
-commit c26dbac28dfdb62e2f6a47ccd75c562819bc6156
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 6 12:34:34 2011 +0000
-
-    Bump prerelease
-
-commit 727fb62b579c7c9a56dda165996e9a9bb84cd5b1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 6 12:34:05 2011 +0000
-
-    Use the available user_attrs dictionary, not the non-existent user dictionary
-
-commit 425b53619deaf92d3fd41964de159a3809b4f05f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 6 11:04:03 2011 +0000
-
-    Bump prerelease
-
-commit b300f00c14270a3a5e2f52332259090ccc3c919d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Dec 6 09:46:01 2011 +0000
-
-    Add an default_locale setting to indicate the preferred system locale and default for all users
-    Add preferredLanguage setting to LDAP attributes obtained with a user account
-
-commit ed14a87d9912f504cfe513b9db9765e4590aa52f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Dec 5 16:20:25 2011 +0000
-
-    Use iconv to normalize/translate strings into their ascii representation
-
-commit a6a58cb40175115da485afc5a605928d01403eac
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Dec 4 18:46:58 2011 +0000
-
-    Translate a 'ó' into a 'o'.
-
-commit 0bb882ad21c9521e3489ecd5bef42d3b47c74c9e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Dec 1 18:36:54 2011 +0000
-
-    Bump prelease
-
-commit f0c49cef4c01dc8d9d9424922cf5a27d8be41d7f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Dec 1 18:36:24 2011 +0000
-
-    Attempt to execute a noop command before attempting to reuse the connection.
-
-commit ac2cd5d1a64fc2a966d4640f0928fbea09937fe1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Nov 29 22:18:57 2011 +0000
-
-    Bump prelease
-
-commit bde8890fe3d1243ed6903a62db3105ef5ce8180d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Nov 29 22:18:24 2011 +0000
-
-    Tidy up (first log, then conf)
-
-commit 78d40271e62b5ada19b76849b545fb2044e53610
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Nov 29 22:17:51 2011 +0000
-
-    Allow re-login to an existing IMAP server connection.
-    Outcomment the incomplete if statement in Cyrus
-
-commit 746901752b119f5c53ce6b334f863f7b248fc46d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Nov 24 21:06:00 2011 +0000
-
-    Bump prerelease
-
-commit 34e09258076ec4b9f2e2ad90a3db7eb4f0e9337a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Nov 24 21:04:35 2011 +0000
-
-    Connect to the IMAP server for the particular domain
-
-commit 50f5c8ab7b7020f6e679cd5a6d965da8017ef48a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Nov 24 21:03:46 2011 +0000
-
-    Replace setting ldap/uri or <domain>/uri with <domain>/ldap_uri
-
-commit 953f35b331e9c613eecb4a04a713abd982d2cdd0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 23 07:54:44 2011 +0100
-
-    Lowercase rules and sender/recipient addresses when parsing the policy, or the policy values may not match the input values.
-    
-    It is safe to lowercase both as exploiting case-sensitivity in mail address local parts or domain name spaces is not allowed.
-    
-    Demo Python code:
-    
-        >>> address = "Jeroen.vanMeeuwen@kolab.org"
-        >>> address.startswith('jeroen')
-        False
-    
-    Solves #496.
-
-commit 5b349dbbb9c1d41d9bb01e477f77b13542dc0a8c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Nov 22 12:56:42 2011 +0100
-
-    Accept any arguments passed on to signal handlers
-
-commit 74ae6bdb18ee1a0bef0757784b4d701b0a08a6fd
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Nov 21 18:15:15 2011 +0100
-
-    Close stdout when removing the handler
-
-commit f37e3435eaacef0390c46f61641fda06f664fa21
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Nov 21 18:12:26 2011 +0100
-
-    Bump prerelease
-
-commit eee9247b505e2cb823caf935dc0cd47cd73a6d31
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Nov 21 18:10:24 2011 +0100
-
-    Remove stdout log handler when executing kolab_smtp_access_policy
-    Add parsing an LDAP DN as a separate function call
-    Add parsing an LDAP URI as a separate function call
-    Use these functions in parse_policy()
-    Disable caching for now
-    Only process the complete request in the DATA protocol stage
-
-commit 9e29b36f4cb2fdd716e1c4713607e1962383da60
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Nov 21 17:40:36 2011 +0100
-
-    We don't actually care about the parameters sent by signal handlers, but we must accept the correct number of parameters.
-    
-      Fixes #516
-
-commit 66b6626f4cbf07a0ca7ff58fa5ed7f209094107e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Nov 21 13:54:24 2011 +0100
-
-    Only create the INBOX folder and apply the rest of the logic when the INBOX folder does not already exist
-
-commit 7e1324dad409e2f9319c3347f071364f0c8f12aa
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 16 00:52:00 2011 +0000
-
-    The recipient policy should recognize special characters in a given name or surname, and replace them with the equivalent ascii valid in an email address.
-    
-      This fixes #509.
-
-commit 31405a32477129f1f8a1a916ffb90b790aaf8949
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 16 00:51:17 2011 +0000
-
-    Add utils.parse_ldap_uri(uri) to parse memberUrl and other LDAP references with
-
-commit f82c7350cd4f0257ab22cbcf0cb6523ba500ff81
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 11 20:33:46 2011 +0000
-
-    A seperator is correctly spelled separator
-
-commit 4253ccba3edbfacca8e79f23e716cc16fc47d525
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 23:05:32 2011 +0000
-
-    Set the default for virtual_domains to 'userid'
-
-commit 7f4f1cb996ad2a45700f7f41b56a613235636305
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 23:04:58 2011 +0000
-
-    Comment out a section of code that should include some debug statements rather then "print" statements
-
-commit 1644d783d2b86ac4b2386fd7c2351b743c8960d6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 23:04:25 2011 +0000
-
-    Bump prerelease
-
-commit daa5b7849f4a1bca689f4a589b71465885fb79f6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 23:02:27 2011 +0000
-
-    Have the sysvinit scripts make use of the -p option
-    Fix default PID file location for kolab-saslauthd
-
-commit a5b0049c34e74c5725f31c615254464fe8d61de8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 23:00:30 2011 +0000
-
-    Add signal handlers to kolabd and saslauthd
-    Add -p / --pid-file option to these daemons
-
-commit 44169b3a26e74ef4e2dcebd35cdbe938d1f11b90
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 17:14:30 2011 +0000
-
-    Remove $MECH and $SOCKETDIR from starting the daemon
-
-commit 9de20ab0991b37ba71ee8ba8d15ffe7491fd2848
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 15:28:11 2011 +0000
-
-    Own /var/run/kolabd/
-
-commit 3b2e32183dda46a7f424738c495d3cd140c52103
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 15:27:17 2011 +0000
-
-    When attempting to find a user_dn, use the base_dn as the search base (ou=People vs. ou=Special Users)
-
-commit 08bc3a29d75b918b4769969345f6fc8b9e763866
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 15:27:05 2011 +0000
-
-    Fix not loading plugins from installed packages
-
-commit 4ff70ee8ecf15e96c59ac707a377ad01e873cbbc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 15:26:44 2011 +0000
-
-    Adjust sysvinit settings for kolabd and saslauthd
-
-commit 16c5b83ca5e6a67185a7d756d6172388c9ba2575
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 13:26:28 2011 +0000
-
-    Bump prerelease
-
-commit 2338814c2f84d1aa7bede235703a0b85a10a9dcf
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 13:25:54 2011 +0000
-
-    Fix forking to the background
-
-commit 8e397c829a317334be759c640710c512a601046f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 13:07:17 2011 +0000
-
-    Bump prerelease
-
-commit fe2d91869348c057cee2dd91ba214b272a97d291
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 13:06:57 2011 +0000
-
-    SASLDaemon has no attribute thread_count
-
-commit 0e8a5848550a1fbb4b64b9527a6cdccfb247ba89
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 13:06:05 2011 +0000
-
-    Include /etc/sysconfig/kolab{d,-saslauthd} in dist, and ship them as part of the RPM packages
-
-commit b82fa343260626e1908fc20ba499c6f73a4e9866
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 13:00:16 2011 +0000
-
-    Update saslauthd sysvinit script
-
-commit 8847bcf8a2c97ee3ef7c75985ce3a03dd576cf81
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 12:26:02 2011 +0000
-
-    Correct source location for kolab-server sysvinit script to install
-
-commit 9056f7c4b94b7df08da9d7b9462177559eff5de2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 12:20:02 2011 +0000
-
-    Make sure to create /etc/rc.d/init.d before installing init scripts into it
-
-commit 44c1d779f9681f19fbdbc3f4aa34f7b52b7333a6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 12:14:54 2011 +0000
-
-    Correct source location for kolabd.py and saslauthd.py
-
-commit 546e58a0627395a03d7532194103564d3349f4d5
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 12:08:12 2011 +0000
-
-    Install sysvinit rc scripts for kolabd and kolab-saslauthd
-
-commit bf9893f6d338f5dccd7e9cae9b682390c2eaaf4e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 11:59:41 2011 +0000
-
-    Own the directories that saslauthd is going to install
-
-commit 62073628f16ee0cbb5a9e2253ede5b7356a75300
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 11:59:25 2011 +0000
-
-    Move installing saslauthd as part of saslauthd's own Makefile.am
-
-commit b1ca449cfe4e497b6192f592e1bab4e85f156f2f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 11:59:13 2011 +0000
-
-    Install as executable
-
-commit 93f84a5d10f0b9fd64a840631832271f122034d7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 11:56:21 2011 +0000
-
-    Refactor kolab_smtp_access_policy to take into account subsequent access policy requests, and query databases only after the complete policy request has been received.
-
-commit b482086e4c42012a7651b8bdf590ee35c3dad909
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Nov 9 11:46:04 2011 +0000
-
-    Use regular search in _find_dn()
-
-commit ab3aeee1a30ee60458f7df99f13aea2992dd784c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 4 11:40:54 2011 +0000
-
-    Merge stash
-
-commit b6ba2d8b09a60e30abc2ad576bc5fb5126d16ccb
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 4 11:39:51 2011 +0000
-
-    Merge stash - no changes
-
-commit 30bf4a165eda33c14d493cdd2e91e5f0b3f614b9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 4 11:38:41 2011 +0000
-
-    Fix reference to revisor
-
-commit ab86e1e85ea181e2e3082c8f10864a567b7f2b0f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 28 12:41:35 2011 +0100
-
-    Enhance handling of search mail attributes
-
-commit f692c2c86d39f5da66922989656488ce03a5e710
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 28 12:40:44 2011 +0100
-
-    Add license header to pykolab/utils
-
-commit 22cfcd2406a44a49bbd263a2600f923a28f8be4c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 28 12:18:43 2011 +0100
-
-    Use the CLI command registration mechanism for setup components as well
-
-commit 45d4f21fe57ba47f97bf29e714bacdecdd2edca2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 28 12:17:41 2011 +0100
-
-    Use one fork per domain name space found
-
-commit c7a72390e2996039da5920981780030e066db960
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 28 12:17:06 2011 +0100
-
-    Do not use a dictionary for auth to store domain name space specific authentication objects in
-
-commit b555c228ff5f65b5502580d53bfa2a1e693f0897
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 28 12:16:09 2011 +0100
-
-    Correct bug tracking URL
-
-commit 7e340bee4b2eb76610a886f73354718c73ffdc9e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 28 12:15:32 2011 +0100
-
-    Correct commands parsing
-
-commit 7790ecb12466e2022061ca5cd0b0565975349681
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 28 12:14:52 2011 +0100
-
-    Allow the user to be passed to be a simple dn basestring
-
-commit 5b5a863282fb37508a4536bdbaa670912317aebc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 19 13:24:30 2011 +0100
-
-    Bump the release minor number for added features, and potentially breaking compatibility (with other applications of which there are none at this point)
-
-commit 6a154d0e2c41716df5da1944eb526081b42514de
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 19 13:23:57 2011 +0100
-
-    Include telemetry commands for the command-line in the telemetry sub-package
-
-commit 7423834758dda2093a6e8e675ab4078c5f87ffcd
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 19 13:22:42 2011 +0100
-
-    Restructure the command-line interface so that it can be extended easier, and particular commands can be shipped in seperate packages
-
-commit 7f981d42521913a3f7a715cd043cbf7fba5009b0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 19 13:20:18 2011 +0100
-
-    Prepare logger for multi-threading, by including the process PID in the debug messages.
-
-commit 11b08b988b983043f0c058014831228d4a4db985
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 19 13:19:18 2011 +0100
-
-    Correct attempting to load the wrong library (imap -> imaplib)
-    Circumvent cases where the port is not set
-
-commit 46884732b48f8ffb8d3c9b17c2e163f31a6eb4db
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Oct 2 15:44:48 2011 +0200
-
-    Update packaging
-
-commit 7cc9142f25af37feda41c4a5685009498d835e01
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Oct 2 15:44:37 2011 +0200
-
-    Install kolab_parse_telemetry
-
-commit 8614ecfac134d73b925a8478b3749315d3248273
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Sep 30 16:26:55 2011 +0200
-
-    Fix logging
-
-commit 45a877b33c797ccab7b35af9068bf0ea05518e00
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Sep 30 16:26:30 2011 +0200
-
-    Use the correct key
-
-commit 7aea161f9cccd84c5855e219d014fa5aec5884c3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Sep 30 16:25:06 2011 +0200
-
-    Fix debuglevel not set in Conf
-
-commit 14c07fad629d9e007786b98a1ab8f6bbc0e4a85d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 26 16:44:32 2011 +0100
-
-    Clean up import code
-
-commit 6a1290ef060c4a7982b400b04f2771a688124c21
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 26 11:58:56 2011 +0100
-
-    Update IMAP libs to be more consistent in terminology
-
-commit 12e585451d2089fb688f299342a8a4e6e5c614f6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 26 11:58:26 2011 +0100
-
-    Some other utilities like debug output, but do not take into account multiple levels of debugging.
-
-commit 1888524f0e8db15921d84d7bea6315af36825ae3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 26 11:58:08 2011 +0100
-
-    Reduce log level required for non-tracing output
-
-commit d71bf4c22beaf3ad5204bab0edcee454881c7084
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 26 11:57:33 2011 +0100
-
-    Strip object's keys with value None
-
-commit a0071cf51effbb2c0c65f9f6c6e6c060b22ab9e0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 26 11:55:06 2011 +0100
-
-    Ensure mail address assigned through Recipient Policies are unique amongst all attributes to a user we consider a valid recipient mail address.
-    Wrap lines
-
-commit 01ecf279a0dcdde1ab3b22d6d0c8fa4f1f8c6b59
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 26 11:35:42 2011 +0100
-
-    Add some telemetry report commands and wrap lines properly
-
-commit 8d8404ed73c89f32de7fe8344e364099c4de1a90
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 26 11:15:02 2011 +0100
-
-    Add telemetry log parsing capabilities
-
-commit 4c13cbbcedafb8c1483dd31e71e0cee8ef47476c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 26 11:14:48 2011 +0100
-
-    Add *.log to .gitignore
-
-commit 325a19c6a2f9fc529a15668494eaf59032e94ff9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 26 11:14:01 2011 +0100
-
-    Add bin/test* to .gitignore
-
-commit 0c376127e2cc0661a84411e0e73e88b56f5bbc2e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 26 11:12:37 2011 +0100
-
-    Add statistical accounting for sender <-> recipient counts per date to the Kolab SMTP Access Policy
-
-commit 1cd487981b53d3e453132393faa2742aac083deb
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Sep 23 16:14:53 2011 +0100
-
-    Update dynamicquota plugin to obey LDAP changes to quota
-
-commit 10065c30df1fe22d111ea5ddd8648c9af06bd24a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Sep 23 16:03:02 2011 +0100
-
-    Update kolabd synchronizing routine
-
-commit bec94af8319f5343e57253bc69cf4a13c16ccde0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 15:13:02 2011 +0100
-
-    Fix syntax error
-
-commit 6ecd2a55995e24095c58ea689932f0b584a9ae40
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 15:06:17 2011 +0100
-
-    Use math.floor(), not math.round()
-
-commit 18a4e35cce6294e12f49ea363f94c04ec599a800
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 15:01:46 2011 +0100
-
-    Version 0.2.1
-
-commit ad2307a724ce0c2163f18471a2c1bc843f06fe6a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 15:01:11 2011 +0100
-
-    Make sure to import math
-
-commit 8c8c9433f5a8f7f814c3d37fdf5610a30b5ba5f9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 12:38:26 2011 +0100
-
-    Add tarball target to Makefile.am
-
-commit d08f7bfe8719aa8cc8b9db73f61b416ca1a37916
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 12:26:02 2011 +0100
-
-    Bring us one step closer to version 1.0
-
-commit 11da87abc4b7bbf50e0c4e4135be05d55a6d2b99
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 12:23:18 2011 +0100
-
-    Detect running in a Murder using the CAPABILITIES line
-
-commit ac337546adcd3e0505a84384730ba65e3cd962e0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 12:22:45 2011 +0100
-
-    Consolidate abstract mailbox delete() function
-
-commit 321269cf8f3e8459991260799e51fdf4d9482015
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 12:20:34 2011 +0100
-
-    Allow increased tracing verbosity on executing plugin hooks
-
-commit 75a73b7182a7e5b2cc14331503c110591e6571e4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 12:19:36 2011 +0100
-
-    Add conf.get_list() function to retrieve a python list from a comma and/or space seperated list
-
-commit 038ef94e3b58484e3907f982ed2748e8936f37c3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 12:18:51 2011 +0100
-
-    Shuffle some of the commands around for alphabetical ordering
-    Add alias shorthand functions
-    Add some future functions to be implemented
-
-commit 8552c02a92f75813a299ce77dab69233926f2d7f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 12:17:41 2011 +0100
-
-    Make sure we have a list of domains before attempting to search for anything
-    Add auth.get_user_attributes() for more then one attribute.
-
-commit 2733017d432ea32a0a7f42d164a70232364e8f60
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 12:17:16 2011 +0100
-
-    Add some words on kolab smtp access policy settings
-
-commit 98cf1af6955eb35a8858b9cf3d7483f650a1c441
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 12:15:23 2011 +0100
-
-    Make the attributes to search for valid addresses a configuration item.
-
-commit de29a02a1cc6a3a1cf86d624432f1ef14ec95be1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 11:43:00 2011 +0100
-
-    Verify whether the user is using an alias as well
-
-commit 6430642c0925d44b82b89a1c000135d4ffd4bad5
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Sep 21 11:10:25 2011 +0100
-
-    Add currently unused function verify_quota.
-    Order functions alphabetically.
-
-commit 8f4b809e3a030ea2d3e2b1f93cf71a731f7a4e56
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Sep 13 15:16:54 2011 +0100
-
-    Bump release adding a command 'kolab export'
-
-commit ddf3ae610c727e90e8b7c861da88a79369cdea1f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Sep 13 15:15:27 2011 +0100
-
-    Add a command export
-
-commit b023694650c2e0accd8d5495b23cad30ca68dc8c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 12 16:08:31 2011 +0100
-
-    Bump release
-
-commit 5fd48d99789956abfc7bf1f72c5ab69357f19f01
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 12 16:08:01 2011 +0100
-
-    Make sure the sender exists before continuing
-
-commit 9eb9bfcbbdcc38681cf706be140debb3ba016d42
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Sep 12 16:07:28 2011 +0100
-
-    Make sure to translate secondary domains into the primary domain key before triggering the domain name space specific authentication technology instance
-
-commit 6f712c0fbec5983cf10626739613a9b29222bd27
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Aug 15 18:40:38 2011 -0400
-
-    Log using the correct variable
-
-commit e6dc1f88a35c470e359705d671a018458d5bf1a7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Aug 15 17:50:57 2011 -0400
-
-    Add policy_done (part two of #332)
-
-commit 8ce75cbc9994142561f6f6afbfa78219f47c5a5c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Aug 15 17:46:24 2011 -0400
-
-    Bump release
-
-commit 339818bfba3f6facb48fe498a375cb567fb01093
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Aug 15 17:41:19 2011 -0400
-
-    Fix bug #332: Recipients are verified on the SMTP level, but rejected in the access policy
-
-commit ba6fd6a45ddbd715a016d27e2d901bf3d09080e6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 3 11:46:25 2011 -0400
-
-    Bump release
-
-commit 486eb3985782841cb5028e0ab4f31824238fba3c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 3 11:44:38 2011 -0400
-
-    Clean up the cache before attempting to insert anything
-
-commit e4f095d560342ba3f93a3effeea1bae2b2b06983
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 3 09:04:02 2011 -0400
-
-    Bump release
-
-commit 783563a4ed9aba2628037539c3e1f75e7e79f04f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 3 09:03:38 2011 -0400
-
-    Correct the inserts back into cache
-
-commit 961743dc37f00d916b8388bc905ce18d626dad6c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 3 08:36:10 2011 -0400
-
-    Bump release
-
-commit 02dc5eaf28696f0c10fbfa19101cec1ae60577fb
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Aug 3 08:35:49 2011 -0400
-
-    Correct __version__ and __release__
-
-commit 0f1aa31f1f256c38e003837d7e4fcc44166b6061
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Aug 2 15:36:21 2011 -0400
-
-    Fix %pre
-
-commit 18a724eae69f5046fcde3facf6cae7c611a5e86f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Aug 2 11:19:46 2011 -0400
-
-    Add users/groups to the packaging for pykolab
-
-commit d93922a222bfe7759955841c9e5aae28f502a4c4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Aug 1 14:34:44 2011 -0400
-
-    Bump version and reset release
-
-commit ce1429e7f3af6763109301e3b5936e297466a588
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Aug 1 14:19:45 2011 -0400
-
-    Using len() on an empty result is not useful. Fixes #258
-
-commit 835f25790ff6dfed09e2b2b437691008ebd55297
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 29 16:36:29 2011 -0400
-
-    Bump release
-
-commit 0ec772807decee7440f7a99b3be2a4725026d7c5
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 29 15:29:42 2011 -0400
-
-    Require more recent sqlalchemy
-
-commit 42e95c7721d5b9449e697b769fc29e968909d9d6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 29 13:02:39 2011 -0400
-
-    Bump release
-
-commit 71587ad53f97a954969bdef73fb24e4fc60e6851
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 29 13:01:52 2011 -0400
-
-    Add dependency on python-sqlalchemy
-
-commit e4c7a4bd74b60876286b74bc1834425a4b583bf5
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jul 29 13:00:51 2011 -0400
-
-    Enhance kolab_smtp_access_policy by providing it with sqlalchemy-based SQL caching
-
-commit ebd1d9e9042a6a90e1ded684870b2ba9e667dc14
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 25 16:56:36 2011 -0400
-
-    Ship kolab_smtp_access_policy
-
-commit 5045e4b90bb49d23b9d5814c7128dbf186190ebf
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 25 16:50:36 2011 -0400
-
-    Lookup the domain name space specific configuration section by domain name space
-
-commit 1b86a960b8270c9a91c5c6d6a3e83bccda667e0c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 18 15:23:35 2011 +0200
-
-    Bump release
-
-commit 286705a702674b16f8f142238edf0c2eb1b36e59
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 18 15:23:01 2011 +0200
-
-    Make sure we only hand out one result per policy request
-
-commit 5ff684c37594dba5bf5936a40b685aa65e8da6ef
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 18 14:19:53 2011 +0200
-
-    Bump release
-
-commit 8e15d2962e5c990830c4d902294aa47d9ad826a3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 18 14:18:43 2011 +0200
-
-    Temporarily disable the cache for issues with multi-threading, and memory load upon high throughput
-
-commit 31b26a6ffc6d4369525a13e69fdfd7da44b386d3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 13 11:10:42 2011 +0200
-
-    Bump release
-
-commit d3952cd88932febef95e4198516d05323d624cc1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 13 11:10:20 2011 +0200
-
-    Can't indefinitely loop
-
-commit 19d239e8f668b735d4cd69c51e3989590618d025
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 13 10:45:28 2011 +0200
-
-    Bump release
-
-commit bcfd9f6c0ee4077e7eb7ba13618ab0e951d0774f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 13 10:44:41 2011 +0200
-
-    Make sure we always end up with a result,
-    Improve log messages,
-    Read policy requests indefinitely
-
-commit f49b722a01222ddc31b07d0c54b96eef8d3f9c8c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 11 22:30:17 2011 +0200
-
-    Bump release
-
-commit ec0611d710283330082674d71c2f514892f36fb4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 11 22:29:56 2011 +0200
-
-    Remember to set sender_allowed to true under the correct circumstances
-
-commit 44fadad98a7377515611cae47a0b60d0c31a0d81
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 6 18:25:46 2011 +0100
-
-    Bump release
-
-commit 39afc3b19cc724b5a2100fd66d0944b892a3368c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 6 18:25:00 2011 +0100
-
-    Use verify_domain() to verify the domain name space is something we host. Helps determining when to search and where to search for user objects
-
-commit 5430cac17017e335ddc1a6243c4ee386c44b9dde
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 6 18:24:41 2011 +0100
-
-    Set a default logfile
-
-commit 6cc40d31ef0aab69b4d3868e277cfaddad226d9d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 6 18:24:09 2011 +0100
-
-    On el5, urlparse returns a tuple
-
-commit 00ef2f73974fd25b437f43d4feb978edcdd741e7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 6 18:23:35 2011 +0100
-
-    Allow for additional filter parameters to be send through the API
-
-commit a538ca41792679ca44f6abbb0e44d848b5c3f5e3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 6 17:18:18 2011 +0100
-
-    Allow the mapping of secondary domain names back onto the primary domain name space authentication library
-
-commit 6c6eb002a30c386ab8ca4629b8e88656dd9a7a7c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 6 16:52:48 2011 +0100
-
-    Use a regular search for domain name spaces
-
-commit 3ae7582f6d569ae7f8f0b83b3b88cfdb29614a51
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 6 15:56:47 2011 +0100
-
-    Sneak in another version bump
-
-commit 3f68a96c2aaae2115297f16e7eaacb985a1a21c2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 6 15:56:20 2011 +0100
-
-    Insert more logging statements and be more verbose in any reject messages as to what the reason is of the rejection
-
-commit 322dbbedeb3ba5e2c8619b06a66db99f3bf16fc1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 6 11:49:48 2011 +0100
-
-    Provide a bunch more commentary in the code
-
-commit f83f240cf0b9edfc16fe23cd3bb6ace03a465dce
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 6 11:28:22 2011 +0100
-
-    Bump release
-
-commit c2d2373ac4190ad1d7c99d03260e3ce622d18073
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jul 6 11:28:12 2011 +0100
-
-    Add cyrus.py
-
-commit 619bf425c57bb516d6cea2275f79026f06bab142
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 23:53:50 2011 +0100
-
-    Bump release
-
-commit e5628adee78efaad76e595b9f0534cb39d0c656a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 19:55:38 2011 +0100
-
-    Add directories to own
-
-commit 55d0838487f45b73cef7646c298e9ba4559dd4cb
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 19:55:23 2011 +0100
-
-    Add directories to create
-
-commit 68422fedfe7d5db35bbb12a6ac765a7507fd6ff5
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 19:53:57 2011 +0100
-
-    Correct path to cache
-
-commit d9a7b05a12559e37d0e61b4e3dc85e4d3b27b19a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 19:27:03 2011 +0100
-
-    Make sure we use /var/lib/kolab/cache/
-
-commit 205d3e034985c17e74eba01e1d79e3658130186b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 17:38:01 2011 +0100
-
-    Avoid having to call the logger with a kw logfile
-
-commit 7e6d27a5da81f2cb8966c1a72de103024463690e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 15:33:47 2011 +0100
-
-    Bump release by just a tiny little bit
-
-commit 6e0cace0773528ab41dd9559e69b0b46e666ada6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 15:33:25 2011 +0100
-
-    Add an additional boolean to the call to connect to imap, whether or not to login
-
-commit 5730afec6a3d17b77676d59295cb275d5c4d9c02
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 15:32:01 2011 +0100
-
-    Only use authentication credentials for authorization, such as when verifying whether the sender is a delegate, if the sasl_username has been supplied
-
-commit 7a5c36fd28db707a9e6cc984d2201931f4fc23c8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 13:53:56 2011 +0100
-
-    Bump release
-
-commit f50750867f5f82077e645c288f68c66ff5e611a2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 13:53:37 2011 +0100
-
-    No longer require python-ldap >= 2.4.0
-
-commit 582cd5f957ff99fa52fd7682b9ad9b9b8b9f816a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 13:53:01 2011 +0100
-
-    Provide a _regular_search API call
-
-commit 9540f069b515e3ba6badd64414a47e93ceafa1dd
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 13:25:35 2011 +0100
-
-    Avoid unknown keyword recoverable
-
-commit 78f17cb9d1213d4c1529b644d72f304bca6bc32a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 13:25:13 2011 +0100
-
-    Avoid unknown keyword recoverable
-
-commit ecc170674d3486b4589d29b71657157d1123424a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 13:05:22 2011 +0100
-
-    Ensure an empty line follows our message.
-    Use permit() instead of defer_if_permit()
-
-commit 4db2566d1391ec458a6b4dd9a5324ae6f658ea15
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 13:04:08 2011 +0100
-
-    Amend some of the _connect() code
-
-commit a5462b9450047521bd766280c0d1b0af17f297ee
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 10:00:03 2011 +0100
-
-    Annotate the difference between a solution and a workaround
-
-commit 6125a1c672bfb0f50a256475034685116202bcda
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 09:59:27 2011 +0100
-
-    Install the saslauthd module in python's sitelib, too
-
-commit 3d9b7aa9998b3a71bf790199a45d6ee1521581ea
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 09:59:01 2011 +0100
-
-    Add action dunno for Kolab SMTP Access Policy
-
-commit b4cb49dd3690d8be274335fdfd423eb5339e76f9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 09:58:47 2011 +0100
-
-    Remove unused import
-
-commit ed15509ca71bc93ca7d2fd063fd453c585fc9834
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jul 5 09:42:58 2011 +0100
-
-    Try only two locations for caching, /var/lib/kolab/ and /tmp/
-    Make sure we use the recipient as the object to pull kolabAllowSMTPSender from
-
-commit b982bd940db33270ed9b25fa11032ca291d94a54
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 18:32:34 2011 +0100
-
-    Require python-ldap >= 2.4.0
-
-commit a979af801737a1512c1756e2f6ed8a69ba617d3d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 17:23:01 2011 +0100
-
-    Wrapper around errors we're going to throw
-
-commit 6771a7fb990a43bf7eaaf35bfef141a2cc3e0d0e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 17:20:06 2011 +0100
-
-    Require python-ldap
-
-commit 42f6b59ede889ea31a3f87b499d79b4bfd78c744
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 17:11:12 2011 +0100
-
-    Include pykolab.conf
-
-commit 6c2dae837e31a9bd063c49bb03746d681a2b76d2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 17:08:08 2011 +0100
-
-    If the folder does not exist, there's no annotations to be returned. This is a case for undelete.
-
-commit b7d8802c82886067d6849612397d31215456d3a0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 16:15:46 2011 +0100
-
-    Avoid very long lines
-
-commit 8c15a0c480c9dd2ae074933cd71a25bb543004b9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 16:15:27 2011 +0100
-
-    Update locations to install our python files
-
-commit 96c64763ad8d08489415cbde48635112fe7958f8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 15:48:13 2011 +0100
-
-    Separate package for kolab-server (/usr/sbin/kolabd)
-
-commit eaacd018f6334ad78b81bc0896cc99d3cd681e94
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 15:32:38 2011 +0100
-
-    Bump release to rebuild without dependency on kolab-python
-
-commit ca6a5430187c09e2c000caadc701a2db96a0d7c7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 14:37:50 2011 +0100
-
-    Make sure all the secondary recipient policies are executed
-
-commit 2b483d09d7301d35c92e5f87b5032d4d513bc44e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 14:36:06 2011 +0100
-
-    Do not call a delete we do not have,
-    For an undelete, first transfer to the target server of the target folder, if any other then the default
-
-commit 2db7807b78fb46155736d344b3fa429ade90ff82
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 14:34:17 2011 +0100
-
-    Update the configuration lib to be a little more robust
-
-commit 209af0b2cb5529fff2ae7db5bc30cf14e1a7c7d6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 14:32:58 2011 +0100
-
-    Provide supportControls search before actual search, but use normal search where appropriate
-
-commit 3a55c071692e1846d4a36ae4589d6924360c49cd
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 14:31:34 2011 +0100
-
-    Correct default for service in is_service()
-
-commit c837fda74052c5dd4e2060f334f5ccec3f6c84e8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 14:29:45 2011 +0100
-
-    Add a constant for KOLAB_LIB_PATH (/var/lib/kolab/)
-
-commit c6afa01abf303dcc83ba1967c31832e14fd23b73
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 14:29:19 2011 +0100
-
-    Update the packaging / release
-
-commit cd5febfb7be4ae4907759c0518cfe16a6c07289e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 14:28:52 2011 +0100
-
-    Add kolab smtp access policy plugin for postfix
-
-commit 694c0a493c15b931375ef7482245c2d5f8044133
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Jul 4 14:28:39 2011 +0100
-
-    Update po files
-
-commit ba0a4c06fec4cbcb2a763257592cd841f1ed20dd
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jun 17 16:08:54 2011 -0500
-
-    Fix the undelete code
-
-commit b415ce79de1271eacbcb6dd5e65d15ded8662ada
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jun 17 16:07:00 2011 -0500
-
-    Update the sync and undelete commands
-
-commit ba6b4c314e13b6a5fd73bbad6b69ef91a32132f4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jun 17 16:06:08 2011 -0500
-
-    Add an XFER call
-
-commit 29009021bd4050a467b9a96abfc82f0d201883d3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jun 17 16:05:48 2011 -0500
-
-    Fix the URL to the bugtracker
-
-commit cd92ac9d39a82a1471dc2277cb55655ab3f8f0ef
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jun 9 12:35:29 2011 +0100
-
-    Update the gen-ldif script
-
-commit 7c44e21b986c82fcee875c6855fcb03673222a2f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Jun 9 12:34:34 2011 +0100
-
-    Change the bug reporting URL
-
-commit 8823099e26dae10dcdebf39152cca92895b3253a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Jun 7 11:41:37 2011 +0100
-
-    Remove current version of kwap
-
-commit 841a05a13637cdf3aff88d1703e2753356e64231
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Jun 3 15:56:45 2011 +0100
-
-    Rename the setup for IMAP
-
-commit 898a4926973c57b341ffdcc48ae30df173436a38
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 11 12:00:11 2011 +0100
-
-    Fix to conform to my own indentation rules
-    Need to pass 'self' as well
-
-commit a44f887e6609d46f39c6f4266a175dce1671d2a0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 11 11:52:29 2011 +0100
-
-    Pull out auth and conf from becoming multi-instance all over the place. One of each suffices.
-    Clean up imap module, along with making the imap.cyrus module work better
-
-commit de8818dd793a1b1caff98be0ff03fc3e032f9f92
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Apr 11 11:51:07 2011 +0100
-
-    Make our auth.ldap module agnostic to python-ldap 2.4 changes
-
-commit b8a2d3b78886126ece422c3141d7bce92e67c65c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Mar 26 17:47:18 2011 +0000
-
-    Increase documentation but primarily write out TODOs
-
-commit aa668ab1bc93254dd03f22bbd85736992dbaa07c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Mar 26 17:42:43 2011 +0000
-
-    Normalize secondary mail in order to compare against primary mail, only return any new or unique results. Exploiting case-sensitivity is considered bad karma anyways.
-
-commit 617e4c80a44d1d67208948f72aa58c63e0793f35
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Mar 26 17:40:50 2011 +0000
-
-    Attemp to import a file that is actually generated with autofoo
-
-commit 780011b096d583b92634f503a58f6667f5b6a839
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Mar 26 17:40:03 2011 +0000
-
-    Ensure that regardless whether or not input is a list or dict, the result can still be normalized
-
-commit 715ba3a676efe04ca2bd11a9d6727074b9a6edfb
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Mar 24 16:31:18 2011 +0000
-
-    Add -l option to specify the loglevel
-
-commit 375d171c5c3ebe0129679231fdc98b9209c19605
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Mar 24 16:28:17 2011 +0000
-
-    Add '-l' option for the loglevel
-
-commit 81d89d1964a0e438b5869bddaf324d906afb9f60
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 19:26:09 2011 +0000
-
-    Fix some of the CLI routines
-
-commit 309aacf7f82de776229ba51f1da20b980db6b983
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 19:25:16 2011 +0000
-
-    Provide convenience functions to IMAP()
-
-commit dba6cf148af7a148d134471cab5ded391e3923d6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 19:24:06 2011 +0000
-
-    Add undelete() to Cyrus
-
-commit 0e7f65f1fc9742e6feb2d2b97074972effa534f6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 13:20:40 2011 +0000
-
-    The SASL authentication daemon too can use the logging and config subsystem enhancements
-
-commit b2c7f60ec0cf67b6510c8126f31e015d316634cb
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 13:19:30 2011 +0000
-
-    The plugins can now make use of the logging facilities,
-    Have the plugins be passed keywords and reflect that
-
-commit 5e5441ecd228e2fa71d6406ba6a7f1f94422d389
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 13:18:49 2011 +0000
-
-    Refactor the logging subsystem
-
-commit f4838fe27f98749f0fa0663d3d940eb5309c75b7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 13:17:43 2011 +0000
-
-    Enhance imap handling with the ability to move users,
-    Provide a Cyrus (Murder) specific handling library
-    Enhance usage of logging and config subsystems
-
-commit 6dce8af0d6e1677950940c11c4b25ec2d1216a79
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 13:16:38 2011 +0000
-
-    Enhance configuration subsystem, and drop runtime
-
-commit fff400379f15390fbf90a75a1748f230bbdf0ee6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 13:15:27 2011 +0000
-
-    Enhance logger and config subsystem usage in pykolab.auth
-
-commit 50519b624a9e3aeb67cad2131ebe227d1d38f4d1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 13:12:10 2011 +0000
-
-    Provide the functions for logging and config enhancements applied throughout the rest of the software
-
-commit e853de01cbc077e9cd31b2f479631ed87dfd1a30
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 13:11:33 2011 +0000
-
-    Remove the saslauthd component from kolabd
-
-commit c125bb6af218622da1426ee37b503e04471c6c3a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 13:10:49 2011 +0000
-
-    Enhance logging and config system in kolabd
-    Reuse the existing Auth() instance (avoid duplicate log entries)
-
-commit 4fd84dc9fce729114370fee5d5f8aff3b4ee95e3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 13:06:01 2011 +0000
-
-    Correct default setting
-
-commit 3ce9034d8c795fce7dd3adba79915fc814dfd455
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 13:05:19 2011 +0000
-
-    Update bin/gen-ldif with the objectclasses and attributes also in the default configuration
-
-commit e06ef982a1207bdd32e3886f02d4abdc86b793f3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 23 13:04:43 2011 +0000
-
-    Attempt to import the file that is actually generated by autofoo
-
-commit e8435b5d42e3432b4c349cf7a52706cbba83f4ca
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 19:03:30 2011 +0000
-
-    Ignore the src/ directory
-
-commit c183e5772139ca67cda102540c14e5410780f1bb
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 18:15:37 2011 +0000
-
-    Add api call for the domain section
-
-commit b7fc8775fcd2b3a2f278b80b63a14acd5120df09
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 18:14:07 2011 +0000
-
-    Catch cases a non-Kolab user needs to authenticate (e.g. 'cyrus-admin' outside of user_base_dn)
-
-commit 2aec8c84bf20fffacd1a8bdb30b104436eef372d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 18:07:27 2011 +0000
-
-    Fix the autofoo wrt. plugins having been moved
-
-commit 1a6d9ae93de38aa6c53f4cc2cf8d71e13d4ba83b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 18:06:31 2011 +0000
-
-    Remove saslauthd options and code from the main daemon
-
-commit 9950787088462b26579400294b3ce92c8c94d2b2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 18:04:46 2011 +0000
-
-    Add our saslauthd multi-domain implementation
-
-commit 3d7deea56bb1f05d773e1e9efe61044a0f5dcd3e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 17:57:33 2011 +0000
-
-    Also exclude MySQLdb in binary compilation
-
-commit 11c54d423e6a95c35932e83f81f367469a96c378
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 17:53:43 2011 +0000
-
-    Redo plugins so they can be binary compiled
-
-commit 354522b3d14ff28c4d976aeab35cb8ac93906b5f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 14:38:38 2011 +0000
-
-    Fix typo
-
-commit 55cb200892ad280feb1546c7bf5b4f0930839ade
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 14:37:41 2011 +0000
-
-    Use the new -b option to freeze.py, and make sure the prefix is correct too
-
-commit 34e000c485eea3194ac31a83f1f1c52aaf09c82d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 14:36:28 2011 +0000
-
-    Link against the dynamic library instead of the static library
-
-commit 94e8397004ef0d9c54ee5156466a3c5d9a975d12
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 14:35:39 2011 +0000
-
-    Take into account the library directory for multi-architecture compatibility (i.e. /usr/lib/ vs. /usr/lib64/)
-
-commit c41a8aedc77afd30784c04c0fa115bc24047e305
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 14:34:11 2011 +0000
-
-    Import external utility freeze.py from r88552
-    
-      URL http://svn.python.org/projects/python/trunk/Tools/freeze
-
-commit 2e35bd755bd6d2f64b714e95466343845b4908c5
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 14:24:06 2011 +0000
-
-    Add saslauthd.py to install target
-
-commit 5785cbf6b31e2355a42a1fc6551b67fc3f7c95c7
-Merge: 6bff64f 15be37a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 14:23:10 2011 +0000
-
-    Merge branch 'master' of ssh://git.kolabsys.com/git/pykolab
-
-commit 6bff64ff08b109e2511d65fada45a65882ce7e08
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 14:22:57 2011 +0000
-
-    Add saslauthd
-
-commit 15be37a1d3258256128ba887d811981cd7daae72
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sun Mar 13 14:22:10 2011 +0000
-
-    Add a make target based on Python's freeze.py (not included in the python packages)
-
-commit 3e64b678658bc67df02d32888384c6ddbfaa5437
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 8 14:52:57 2011 +0000
-
-    Expunging folders is part of the loop
-
-commit bc43942fe491fb6f3edcf111c99605c0fddd905f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 8 14:52:05 2011 +0000
-
-    Remove documentation and start over.
-
-commit 5a9c0167e3229cc8604e99e10d0f6d3d4db2a2c0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Tue Mar 8 12:34:19 2011 +0000
-
-    Remove unused base
-
-commit 43f44f19107fdc97120558d91caf334efb92fcea
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 17:47:35 2011 +0000
-
-    Also set the acls on additional folders
-    Make sure we seek out the quota_attribute setting in the right location
-
-commit 8f7b40e18c268f3dfa17315373e587bf1dafacd9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 17:44:35 2011 +0000
-
-    Move quota_attribute to the actual auth_mechanism, from the backend technology section
-    Use 'acls', as in plural, since we also have 'annotations'
-
-commit 10060ab8e6aa44adedbdbb975021c98d5db3bb9d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 15:46:09 2011 +0000
-
-    Update license in spec
-
-commit 7d9324de99184598fb22824f9a500c55bd3a3aec
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 15:45:29 2011 +0000
-
-    Relicense from GPLv2 only to GPLv3+
-
-commit a6773874d462a661173991004d5e4dafd87c4b6c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 15:45:11 2011 +0000
-
-    More example configuration in the default configuration file.
-
-commit 4a4f7802472cc45ebf6a336c842e64789bc9dff9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 15:35:28 2011 +0000
-
-    Add the GPLv3 license file
-
-commit 7e28ca3be562830401c1562f4c5d9b3bea661497
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 15:18:18 2011 +0000
-
-    Hooks in plugins may also like keyword dictionaries as arguments
-
-commit 8a8634397b25d64f22b7699f74365d45cbc1ab20
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 15:16:55 2011 +0000
-
-    Ensure the recipientpolicy plugin handles the new format for users
-
-commit f39d78d9993d62e8967d093ceeb52c5fc4054120
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 15:16:09 2011 +0000
-
-    Update dynamicquota plugin to also take the domain default quota, if any, as a parameter.
-
-commit 7227b5d35ccb95582dc879adddb5a93e93bb9647
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 15:15:21 2011 +0000
-
-    Update the imap abstraction layer to be a little more efficient, and make sure we handle multi-domain cases correctly
-
-commit 8888a7120e0993eb162895ce677e9b6b0f9e1e61
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 15:14:07 2011 +0000
-
-    Update Conf() with various tidbits
-    Prepare to limit access to Conf.cfg_parser
-
-commit e18baf8b7d48d9e1f07ba81e25e0ac7896565f40
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 15:12:37 2011 +0000
-
-    Rewrite action_sync()
-    Use the new library functions in action_list_domains()
-
-commit a593f9575820e6c029a8ff37d7df6253f35d0e84
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 15:09:51 2011 +0000
-
-    Resort module imports
-    Just use the Python loggin library logger
-    Standardize function names a little better
-    Make LDAP page its results so large sets of search results hit no admin or search limit
-
-commit eb8353dd68d593dffb8a8b40d3b16ab665635892
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 15:09:00 2011 +0000
-
-    Add an enhanced SASL authentication daemon to the Kolab daemon
-
-commit 0315add2c60954646962937dc9d616c4339d392e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 15:00:02 2011 +0000
-
-    Make the default be example.org instead of kanarip.com
-
-commit d40895d9aa0a2d5cb89c6f96a7f4f4779ed08d63
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 14:59:28 2011 +0000
-
-    Take options that modify which users end up where (domain name, rootdn and ou, in that order)
-
-commit a8c1bbcb6b20d60926be7b80dda0c6d77871b600
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Mar 7 13:56:01 2011 +0000
-
-    Add the normalization for dictionaries to utils, as it proves useful in more then just LDAP result normalization.
-    Also add the conversion between a domain name space and a standard root dn distilled from that domain name space
-
-commit 5660589ce87e80f0a4bf58d19802a758329b8ff5
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 2 18:40:37 2011 +0000
-
-    Add a script that'll generate randomized user accounts in LDIF format, given a number
-
-commit f45102c3260b6e534f1c4b5158f765c3d1ae1647
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 2 13:49:56 2011 +0000
-
-    Let's use the logger if we have it.
-
-commit fa08b287713bc6b34133fc28d4cdaf97021631a0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 2 13:49:33 2011 +0000
-
-    Enable alternative email addresses to also be inserted back into LDAP
-
-commit 18da9a49afe99a432c377b7e9b238adf33a5b3cc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 2 13:48:36 2011 +0000
-
-    Implement a simple command, and start with just sync (nice for cronjobs!)
-
-commit 1df25181222459bd92ad64296b6bec05b842b981
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 2 13:37:07 2011 +0000
-
-    Bail out with a message on --help if no command is given on the CLI
-
-commit 8c754a5f9eed2ecb2d6257d3932c9c436f0eefa1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 2 13:34:15 2011 +0000
-
-    Fix typo
-
-commit f0f6f6cc2499a7a4513cd67d54e8881a28a9800f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 2 12:05:53 2011 +0000
-
-    Include conf being passed on to plugins
-
-commit ceb8643ec9ebff8925fbc5b1e5f734634e692c2a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 2 12:04:36 2011 +0000
-
-    Update recipientpolicy plugin by splitting the functions for primary mail and alternative mail addresses, so we can remove its inclusion of Auth() and Conf()
-
-commit 83c85dd54a7e1d29913dc525ca81823185b55e73
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 2 12:04:01 2011 +0000
-
-    Plugins now get a configuration class object passed too
-
-commit c3e345d80f65657741475fcb93d907f0ee96d260
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 2 12:02:55 2011 +0000
-
-    Temporary disable additional_folders from being actively used,
-    Log to debug channel instead of printing messages
-
-commit 336be8ce36f282d08a9d79f871390765be3bda4b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 2 12:02:31 2011 +0000
-
-    Pass on the configuration to the plugins wrapper
-
-commit 1f42b362709a09e73e3a93a61dd5c967b0d47098
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Mar 2 12:00:51 2011 +0000
-
-    Remove import not distributed, and only attempt to import the appropriate library after it's been verified the technology is actually used.
-    Remove unused import for IMAP
-    Simplify initialization
-
-commit 9537a8ea971833c8e3a1624ab685f844f3aa8e8e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Feb 25 11:03:18 2011 +0000
-
-    Update copyright notice
-
-commit 61056c5254c94d01350192231c79e03160558812
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Feb 25 11:02:33 2011 +0000
-
-    Add po/*.gmo to .gitignore
-
-commit afb9acc63e139042006342a0f86ecc97c1467c7f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Feb 21 22:30:22 2011 +0000
-
-    Add tests and tests/zpush
-
-commit 3fb8a8323374167da5594a933e1573ac3f94e72c
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Feb 21 22:22:24 2011 +0000
-
-    Update makefiles
-
-commit e765e9e33860e7659e1b27534f2f78bd632fa5e0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Feb 21 21:52:41 2011 +0000
-
-    Update gitignore
-
-commit 0f658c8ce990a816458d152a6ae4ce24e514e0db
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Feb 21 21:51:23 2011 +0000
-
-    Add a shortcut script to update the po files
-
-commit d4bbdffe03f54c98ffd34c3a2faeca375f57a6ee
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Feb 21 21:51:04 2011 +0000
-
-    Add semantics for packaging and localization
-
-commit cd89058ed3fa4b1def41b6ca97c398c8de6ed1c2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Feb 21 19:42:11 2011 +0000
-
-    Increment thread_count
-
-commit 18f28384acd7fc91b1e5b814cd29d0f52cfcb9e9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Feb 21 19:39:33 2011 +0000
-
-    Update AUTHORS
-
-commit 9445cb3c24e790172dade18f1942ca76614aedb0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Feb 21 15:19:16 2011 +0000
-
-    Update copyright headers
-
-commit b72a83b79a3616a0c451143f66332876929aee2b
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Feb 21 15:14:28 2011 +0000
-
-    Update pykolab including:
-    
-      - a plugin system,
-      - some example plugins,
-      - a working kolab daemon,
-      - copyright updates,
-      - auth/ldap/ abstraction so auth/sql/ can be plugged in,
-      - and more.
-
-commit 8a85a51fb60d01495ed470bd1e545d98c05b1299
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Feb 21 15:09:11 2011 +0000
-
-    Add additional options to kolab.conf
-
-commit 0a7b4ed46177d6bb3bb74b8e5fbe444a15bd8e89
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jan 5 12:52:58 2011 +0100
-
-    Add an example test configuration file
-
-commit 6a35e5efa2ffd88ebcc69b1bcd3c4d4639082f30
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Jan 5 12:38:37 2011 +0100
-
-    Add cyruslib
-
-commit 2179a1ff034888b263ec7d2c65550b55f1d2bf78
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Nov 15 23:41:53 2010 +0000
-
-    Add comment and fix location for debugging message
-
-commit daa9aa9bbe533caa806eb7717fb1943adc8605f8
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Nov 15 23:30:04 2010 +0000
-
-    Check for calendar/contacts/mail settings, and make sure the suites set them correctly, or bail out setting others if both a suite as well as one of the item types have been selected.
-
-commit c9850853870b264384e3e075a59a5b3e3fcd6dad
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 12 15:34:18 2010 +0000
-
-    Add the ability to inject some email, too
-
-commit 03a8f945566e9ec5e9b9ada9bff79ee3b67c366d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 12 13:53:51 2010 +0000
-
-    Fix syntax mishap typo (</given_name> -> </given-name>, thanks volker)
-    Fix qp encoded -> 7bit(?) (thanks volker)
-
-commit 6e7f0ce2d336874af5566e8210d674b96146f48f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 12 13:26:30 2010 +0000
-
-    Fix 'events' in creating 'contacts' message
-
-commit 62b6ea1562f6c07133743ae0e3cd2c83b098282a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 12 13:25:47 2010 +0000
-
-    Update the testing of contacts
-
-commit 036d9edf388cc979f2583849e247ef46d8dba8fd
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Nov 12 13:24:43 2010 +0000
-
-    Expand README on tests
-
-commit 33344bf341ed1416f22122a704b9e8c0360d52e9
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 27 23:16:05 2010 +0100
-
-    Add a README.tests
-
-commit 2a78370ea84447e486079080eaa7901979d572bc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 27 22:54:59 2010 +0100
-
-    Add some constants to the general testing, and add the calendaring item semantics
-
-commit c8d0eaff597164079866421a08ff993a8cdfe43f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 27 22:53:08 2010 +0100
-
-    Comment a little more on the utilities in pykolab/utils.py
-
-commit 9dd56890008a4255dcf4a528b83dcc889013025e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 27 22:52:36 2010 +0100
-
-    Add the test suite for zpush
-
-commit bfefee96a24c5a5896be635d31708fa7d1431eec
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 27 22:51:35 2010 +0100
-
-    Instead of executing one arbitrary forcefull imap message file injection here, move to executing suites of tests
-
-commit f7f16586b4b26e5bd198ac53f60ca869754bff13
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 27 22:46:00 2010 +0100
-
-    Make sure the configuration lib parts have;
-    
-      - Configuration file parsing semantics
-      - Sufficient defaults to handle a test suite
-      - Configuration item checking semantics
-
-commit 97baa8876b3969cc663aa25a8e5b1d5adaa49b22
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 27 22:45:08 2010 +0100
-
-    I know this was a copy/paste job, but this program is called pykolab
-
-commit 24b2b7782945d0953ed0a0086ce0fff3025b6512
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 27 22:44:42 2010 +0100
-
-    Reorder importing the core components
-
-commit 0cb6931999d22a3c9c1ef1965983ff33b61ba614
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 27 22:43:46 2010 +0100
-
-    Make sure we finalize the configuration
-
-commit 7f7ea5bb073e3335173f5e337a345589f1607739
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Wed Oct 27 22:42:00 2010 +0100
-
-    Move files from python code directories to their new location in share/tests/
-
-commit 9c4499cbb60a45e6086a0ba5c3102b2e6c256cad
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Mon Oct 25 15:27:06 2010 +0100
-
-    Explain what utils.ask_confirmation() is all about
-
-commit 6e8f6623668d0f0e77ad7094941bfa10bfe1ecba
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Oct 23 01:34:25 2010 +0100
-
-    Add some, lose some, add some empty attrs.
-
-commit 264073e33057ad6bc189f037e27fd6d810291763
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Oct 23 01:22:38 2010 +0100
-
-    Remove duplicate space
-
-commit 5c189c4754968092ce97470737085ed60f9dab94
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Oct 23 01:00:00 2010 +0100
-
-    Fix some other errors as well
-
-commit 74d1d469d6c26e449daa03a6d00689d1d2d7b3ae
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Oct 23 00:45:15 2010 +0100
-
-    Make sure we are using double digits
-
-commit c260a62c276fbcea14a95b6e515497a25039475f
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Oct 23 00:43:46 2010 +0100
-
-    	renamed:    kaddressbook-contact.tpl -> kaddress-contact.tpl
-
-commit 36805525151bf0a1029ec8ddac3ab789827c7ff6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Oct 23 00:42:56 2010 +0100
-
-    fix syntax error
-
-commit 852fae409f8af5d32ef01a4f108847766838771d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Oct 23 00:42:25 2010 +0100
-
-    => becomes >=
-
-commit dfa1c7f32cb96796976cc8edb14fd5b19a17a3b2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Oct 23 00:41:27 2010 +0100
-
-    Fix typo
-
-commit 3bfb67e380f45fe5e78b3ffe6896644de0c172b7
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Oct 23 00:39:59 2010 +0100
-
-    Fix the 's' in here as well
-
-commit 717bb2bfade7713fd011d53002df0a1ecb9492ad
-Author: Paul James Adams (Kolab Systems) <adams@kolabsys.com>
-Date:   Sat Oct 23 00:39:18 2010 +0100
-
-    Check in Paul's script for mass-creating contacts
-
-commit 416ee1d06b67b68cd4d50415c2cb2d04b41c6df1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Sat Oct 23 00:10:30 2010 +0100
-
-    Let's not print status information any longer, but instead indicate what would be doing here
-
-commit f5e907e62f1e0d5c756603523ede3002c032b7b0
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 22 23:16:40 2010 +0100
-
-    Use the day, in a day
-
-commit 7f9812c072cf5d4f0088a592d6913a5bdddb6ba2
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 22 23:11:29 2010 +0100
-
-    Update the line termination on the recurrence
-    Reduce the number of iterations
-
-commit 3cb81928f93e806f6f930e57eaff70246335ecc3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 22 22:50:20 2010 +0100
-
-    Fix the 's' in domains
-
-commit 6751dbf6eb5169faaba67f18de43b4333356462a
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 22 21:55:54 2010 +0100
-
-    Correct the path for the files using the appropriate domain and location
-
-commit 0b3390839207a82956cf996fec79cc7b5696bb98
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 22 21:43:14 2010 +0100
-
-    Populate a bunch of user calendar directories with a bunch of events
-
-commit 9d6bb677ffe6a362dc939c9fd152f9c27a4a96d6
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 8 13:32:35 2010 +0200
-
-    Attempt to load the lib, but fail verbosely if it doesn't succeed
-
-commit d60eebbdfe20859dd29fa3d6f0ad0daea77bc0f3
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 8 13:32:18 2010 +0200
-
-    Check in the first set of actions to execute
-
-commit ad572e9d144c603d0af4e17a2510ef0c2c1f5f24
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 8 13:31:31 2010 +0200
-
-    Split up the initialization of .conf adding a finalization
-
-commit bde4c1530a3aedc562dfd8c7e0cc13721336179d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 8 13:27:49 2010 +0200
-
-    If the user says we must be quiet... well we better be quiet
-
-commit 11c2e732e4ae8dd1e8b5eee6e7de8d34f63568a1
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Fri Oct 8 13:26:39 2010 +0200
-
-    A simple dialog asking for confirmation
-
-commit 05e06399f287e7bf6387b3fd8eb7100df607bda4
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Aug 26 11:59:08 2010 +0200
-
-    Fix the source tree identifier
-
-commit 13cc61bcef3c40e9c2821626df4d20cd82bbfd1e
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Aug 26 11:58:52 2010 +0200
-
-    Update .gitignore to reflect former changes
-
-commit 1119b629ca26edfbac1bbb519136e3e664cad4fc
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Aug 26 11:57:20 2010 +0200
-
-    Make the compile/build time variables appear in constants, and then re-use constants
-
-commit b2939c5516e3f8d3dc77ccbc5ddbfc46938c2423
-Author: Jeroen van Meeuwen <jmeeuwen@master.puppetmanaged.org>
-Date:   Thu Aug 26 11:22:23 2010 +0200
-
-    Add yet another file to the ignore list ;-)
-
-commit d0adba5b736a80b16243e079ba9df66b5ee2a3b6
-Author: Jeroen van Meeuwen <jmeeuwen@master.puppetmanaged.org>
-Date:   Thu Aug 26 11:20:43 2010 +0200
-
-    Add extra files to ignore
-
-commit e2f75e06656c1bd0cd0cecb4a99b8220f468fd8d
-Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
-Date:   Thu Aug 26 10:17:37 2010 +0100
-
-    Initial commit

pykolab-0.7.tar.gz/Makefile.in Deleted

@@ -1,975 +0,0 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = .
-DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
-	$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/configure $(am__configure_deps) \
-	$(top_srcdir)/bin/rebuild.sh.in $(srcdir)/pykolab.spec.in \
-	COPYING TODO install-sh missing py-compile
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES = bin/rebuild.sh pykolab.spec
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	cscope distdir dist dist-all distcheck
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-CSCOPE = cscope
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
-      || { sleep 5 && rm -rf "$(distdir)"; }; \
-  else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^$[^/]*$/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/$[^/]*$$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-DIST_TARGETS = dist-gzip
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-ALL_LINGUAS = @ALL_LINGUAS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DATESTAMP = @DATESTAMP@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GMOFILES = @GMOFILES@
-GMSGFMT = @GMSGFMT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLLIBS = @INTLLIBS@
-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
-INTLTOOL_MERGE = @INTLTOOL_MERGE@
-INTLTOOL_PERL = @INTLTOOL_PERL@
-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
-INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
-INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
-INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
-INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGFMT_OPTS = @MSGFMT_OPTS@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POFILES = @POFILES@
-POSUB = @POSUB@
-PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
-PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
-PYTHON = @PYTHON@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RELEASE = @RELEASE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-intltool__v_merge_options_ = @intltool__v_merge_options_@
-intltool__v_merge_options_0 = @intltool__v_merge_options_0@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-DISTCLEANFILES = \
-	intltool-extract \
-	intltool-merge \
-	intltool-update
-
-INTLTOOL_FILES = \
-	intltool-extract.in \
-	intltool-merge.in \
-	intltool-update.in
-
-PYTHON_FILES = \
-	bin/kolab_parse_telemetry.py \
-	bin/kolab_smtp_access_policy.py \
-	cyruslib.py \
-	conf.py \
-	kolab-cli.py \
-	kolabd.py \
-	saslauthd.py \
-	setup-kolab.py \
-	ucs/listener.py \
-	wallace.py
-
-EXTRA_DIST = \
-	bin/rebuild.sh.in \
-	AUTHORS \
-	ChangeLog \
-	COPYING \
-	INSTALL \
-	NEWS \
-	README \
-	README.tests \
-	pykolab.spec \
-	pykolab.spec.in \
-	pylint.log \
-	$(wildcard tests/*.py) \
-	$(wildcard tests/*/*.py) \
-	$(wildcard tests/*/*/*.py) \
-	$(PYTHON_FILES)
-
-SUBDIRS = \
-	conf \
-	kolabd \
-	po \
-	pykolab \
-	saslauthd \
-	share \
-	wallace
-
-execdir = $(sbindir)
-all: all-recursive
-
-.SUFFIXES:
-am--refresh: Makefile
-	@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-bin/rebuild.sh: $(top_builddir)/config.status $(top_srcdir)/bin/rebuild.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-pykolab.spec: $(top_builddir)/config.status $(srcdir)/pykolab.spec.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscope: cscope.files
-	test ! -s cscope.files \
-	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-clean-cscope:
-	-rm -f cscope.files
-cscope.files: clean-cscope cscopelist
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__post_remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__post_remove_distdir)
-
-dist-lzip: distdir
-	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__post_remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__post_remove_distdir)
-
-dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__post_remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__post_remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__post_remove_distdir)
-
-dist dist-all:
-	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
-	$(am__post_remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lz*) \
-	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir)
-	chmod u+w $(distdir)
-	mkdir $(distdir)/_build $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__post_remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@test -n '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: trying to run $@ with an empty' \
-	       '$$(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	$(am__cd) '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am: install-exec-local
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
-	am--refresh check check-am clean clean-cscope clean-generic \
-	cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
-	dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
-	distcheck distclean distclean-generic distclean-tags \
-	distcleancheck distdir distuninstallcheck dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-exec-local install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	installdirs-am maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
-	tags-am uninstall uninstall-am
-
-
-ChangeLog: pylint
-	(GIT_DIR=.git git log $(PACKAGE)-$(VERSION) > .changelog.tmp && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git directory not found: installing possibly empty changelog.' >&2)
-
-pylint:
-	@pylint \
-		bin/kolab_smtp_access_policy.py \
-		bin/kolab_parse_telemetry.py \
-		bonnie.py \
-		conf.py \
-		kolabd.py \
-		kolab.py \
-		saslauthd.py \
-		setup-kolab.py \
-		wallace.py \
-		bonnie/ \
-		kolabd/ \
-		kolab/ \
-		pykolab/ \
-		saslauthd/ \
-		wallace/ \
-		> pylint.log || :
-
-srpm: ChangeLog dist 
-	@rpmbuild -ts $(PACKAGE)-$(VERSION).tar.gz
-
-rpm: srpm
-	@rpmbuild -ta $(PACKAGE)-$(VERSION).tar.gz
-
-binary:
-	python ext/python/Tools/freeze/freeze.py \
-		-p $(prefix) \
-		-b $(libdir) \
-		-x BaseHTTPServer \
-		-x ConfigParser \
-		-x FixTk \
-		-x MySQLdb \
-		-x SocketServer \
-		-x StringIO \
-		-x Tkconstants \
-		-x Tkinter \
-		-x UserDict \
-		-x __future__ \
-		-x _abcoll \
-		-x _threading_local \
-		-x _weakrefset \
-		-x _xmlplus \
-		-x abc \
-		-x atexit \
-		-x base64 \
-		-x bdb \
-		-x bisect \
-		-x calendar \
-		-x cmd \
-		-x collections \
-		-x copy \
-		-x copy_reg \
-		-x difflib \
-		-x dis \
-		-x distutils \
-		-x doctest \
-		-x dsml \
-		-x dummy_thread \
-		-x encodings \
-		-x fnmatch \
-		-x formatter \
-		-x ftplib \
-		-x functools \
-		-x genericpath \
-		-x getopt \
-		-x getpass \
-		-x gettext \
-		-x glob \
-		-x gzip \
-		-x hashlib \
-		-x hmac \
-		-x httplib \
-		-x imaplib \
-		-x inspect \
-		-x io \
-		-x ldapurl \
-		-x ldif \
-		-x linecache \
-		-x locale \
-		-x logging \
-		-x mimetools \
-		-x mimetypes \
-		-x ntpath \
-		-x nturl2path \
-		-x optparse \
-		-x os2emxpath \
-		-x pdb \
-		-x pickle \
-		-x pkgutil \
-		-x posixpath \
-		-x pprint \
-		-x py_compile \
-		-x pydoc \
-		-x pydoc_data \
-		-x quopri \
-		-x random \
-		-x repr \
-		-x rfc822 \
-		-x shlex \
-		-x shutil \
-		-x site \
-		-x smtplib \
-		-x socket \
-		-x ssl \
-		-x stat \
-		-x string \
-		-x struct \
-		-x subprocess \
-		-x sysconfig \
-		-x tarfile \
-		-x tempfile \
-		-x textwrap \
-		-x threading \
-		-x traceback \
-		-x types \
-		-x urlparse \
-		-x uu \
-		-x warnings \
-		-o src/kolabd/ \
-		kolabd.py
-	cd src/kolabd/; $(MAKE)
-
-check:
-	nosetests -v tests/
-
-clean:
-	rm -rf src/*; mkdir -p src/
-	find -type f -name "*.pyo" -o -name "*.pyc" -delete
-
-install-exec-local:
-	mkdir -p $(DESTDIR)/$(sbindir) \
-		$(DESTDIR)/$(bindir) \
-		$(DESTDIR)/$(sysconfdir)/kolab \
-		$(DESTDIR)/$(libexecdir)/postfix \
-		$(DESTDIR)/$(localstatedir)/lib/kolab \
-		$(DESTDIR)/$(localstatedir)/log/kolab \
-		$(DESTDIR)/$(localstatedir)/spool/pykolab/wallace
-
-@ENTERPRISE_TRUE@	mkdir -p $(DESTDIR)/$(sysconfdir)/kolab/entitlement.d
-	$(INSTALL) -p -m 755 conf.py $(DESTDIR)/$(sbindir)/kolab-conf
-	$(INSTALL) -p -m 755 kolab-cli.py $(DESTDIR)/$(sbindir)/kolab
-	$(INSTALL) -p -m 755 kolabd.py $(DESTDIR)/$(sbindir)/kolabd
-	$(INSTALL) -p -m 755 saslauthd.py $(DESTDIR)/$(sbindir)/kolab-saslauthd
-	$(INSTALL) -p -m 755 wallace.py $(DESTDIR)/$(sbindir)/wallaced
-	$(INSTALL) -p -m 755 setup-kolab.py $(DESTDIR)/$(sbindir)/setup-kolab
-	$(INSTALL) -p -m 644 cyruslib.py $(DESTDIR)/$(pythondir)
-	$(INSTALL) -p -m 755 bin/kolab_parse_telemetry.py $(DESTDIR)/$(sbindir)/kolab_parse_telemetry
-	$(INSTALL) -p -m 755 bin/kolab_smtp_access_policy.py $(DESTDIR)/$(libexecdir)/postfix/kolab_smtp_access_policy
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

pykolab-0.7.tar.gz/TODO Deleted

pykolab-0.7.tar.gz/aclocal.m4 Deleted

@@ -1,1994 +0,0 @@
-# generated automatically by aclocal 1.13.4 -*- Autoconf -*-
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
-[m4_warning([this file was generated for autoconf 2.69.
-You have another version of autoconf.  It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-
-# Copyright (C) 1995-2002 Free Software Foundation, Inc.
-# Copyright (C) 2001-2003,2004 Red Hat, Inc.
-#
-# This file is free software, distributed under the terms of the GNU
-# General Public License.  As a special exception to the GNU General
-# Public License, this file may be distributed as part of a program
-# that contains a configuration script generated by Autoconf, under
-# the same distribution terms as the rest of that program.
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-#
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995, 1996
-#
-# Modified to never use included libintl. 
-# Owen Taylor <otaylor@redhat.com>, 12/15/1998
-#
-# Major rework to remove unused code
-# Owen Taylor <otaylor@redhat.com>, 12/11/2002
-#
-# Added better handling of ALL_LINGUAS from GNU gettext version 
-# written by Bruno Haible, Owen Taylor <otaylor.redhat.com> 5/30/3002
-#
-# Modified to require ngettext
-# Matthias Clasen <mclasen@redhat.com> 08/06/2004
-#
-# We need this here as well, since someone might use autoconf-2.5x
-# to configure GLib then an older version to configure a package
-# using AM_GLIB_GNU_GETTEXT
-AC_PREREQ(2.53)
-
-dnl
-dnl We go to great lengths to make sure that aclocal won't 
-dnl try to pull in the installed version of these macros
-dnl when running aclocal in the glib directory.
-dnl
-m4_copy([AC_DEFUN],[glib_DEFUN])
-m4_copy([AC_REQUIRE],[glib_REQUIRE])
-dnl
-dnl At the end, if we're not within glib, we'll define the public
-dnl definitions in terms of our private definitions.
-dnl
-
-# GLIB_LC_MESSAGES
-#--------------------
-glib_DEFUN([GLIB_LC_MESSAGES],
-  [AC_CHECK_HEADERS([locale.h])
-    if test $ac_cv_header_locale_h = yes; then
-    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
-      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
-       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
-    if test $am_cv_val_LC_MESSAGES = yes; then
-      AC_DEFINE(HAVE_LC_MESSAGES, 1,
-        [Define if your <locale.h> file defines LC_MESSAGES.])
-    fi
-  fi])
-
-# GLIB_PATH_PROG_WITH_TEST
-#----------------------------
-dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-glib_DEFUN([GLIB_PATH_PROG_WITH_TEST],
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
-  /*)
-  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in ifelse([$5], , $PATH, [$5]); do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if [$3]; then
-	ac_cv_path_$1="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
-  ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
-  AC_MSG_RESULT([$]$1)
-else
-  AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-# GLIB_WITH_NLS
-#-----------------
-glib_DEFUN([GLIB_WITH_NLS],
-  dnl NLS is obligatory
-  [USE_NLS=yes
-    AC_SUBST(USE_NLS)
-
-    gt_cv_have_gettext=no
-
-    CATOBJEXT=NONE
-    XGETTEXT=:
-    INTLLIBS=
-
-    AC_CHECK_HEADER(libintl.h,
-     [gt_cv_func_dgettext_libintl="no"
-      libintl_extra_libs=""
-
-      #
-      # First check in libc
-      #
-      AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc,
-        [AC_TRY_LINK([
-#include <libintl.h>
-],
-         [return !ngettext ("","", 1)],
-	  gt_cv_func_ngettext_libc=yes,
-          gt_cv_func_ngettext_libc=no)
-        ])
-  
-      if test "$gt_cv_func_ngettext_libc" = "yes" ; then
-	      AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc,
-        	[AC_TRY_LINK([
-#include <libintl.h>
-],
-	          [return !dgettext ("","")],
-		  gt_cv_func_dgettext_libc=yes,
-	          gt_cv_func_dgettext_libc=no)
-        	])
-      fi
-  
-      if test "$gt_cv_func_ngettext_libc" = "yes" ; then
-        AC_CHECK_FUNCS(bind_textdomain_codeset)
-      fi
-
-      #
-      # If we don't have everything we want, check in libintl
-      #
-      if test "$gt_cv_func_dgettext_libc" != "yes" \
-	 || test "$gt_cv_func_ngettext_libc" != "yes" \
-         || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then
-        
-        AC_CHECK_LIB(intl, bindtextdomain,
-	    [AC_CHECK_LIB(intl, ngettext,
-		    [AC_CHECK_LIB(intl, dgettext,
-			          gt_cv_func_dgettext_libintl=yes)])])
-
-	if test "$gt_cv_func_dgettext_libintl" != "yes" ; then
-	  AC_MSG_CHECKING([if -liconv is needed to use gettext])
-	  AC_MSG_RESULT([])
-  	  AC_CHECK_LIB(intl, ngettext,
-          	[AC_CHECK_LIB(intl, dcgettext,
-		       [gt_cv_func_dgettext_libintl=yes
-			libintl_extra_libs=-liconv],
-			:,-liconv)],
-		:,-liconv)
-        fi
-
-        #
-        # If we found libintl, then check in it for bind_textdomain_codeset();
-        # we'll prefer libc if neither have bind_textdomain_codeset(),
-        # and both have dgettext and ngettext
-        #
-        if test "$gt_cv_func_dgettext_libintl" = "yes" ; then
-          glib_save_LIBS="$LIBS"
-          LIBS="$LIBS -lintl $libintl_extra_libs"
-          unset ac_cv_func_bind_textdomain_codeset
-          AC_CHECK_FUNCS(bind_textdomain_codeset)
-          LIBS="$glib_save_LIBS"
-
-          if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then
-            gt_cv_func_dgettext_libc=no
-          else
-            if test "$gt_cv_func_dgettext_libc" = "yes" \
-		&& test "$gt_cv_func_ngettext_libc" = "yes"; then
-              gt_cv_func_dgettext_libintl=no
-            fi
-          fi
-        fi
-      fi
-
-      if test "$gt_cv_func_dgettext_libc" = "yes" \
-	|| test "$gt_cv_func_dgettext_libintl" = "yes"; then
-        gt_cv_have_gettext=yes
-      fi
-  
-      if test "$gt_cv_func_dgettext_libintl" = "yes"; then
-        INTLLIBS="-lintl $libintl_extra_libs"
-      fi
-  
-      if test "$gt_cv_have_gettext" = "yes"; then
-	AC_DEFINE(HAVE_GETTEXT,1,
-	  [Define if the GNU gettext() function is already present or preinstalled.])
-	GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
-	if test "$MSGFMT" != "no"; then
-          glib_save_LIBS="$LIBS"
-          LIBS="$LIBS $INTLLIBS"
-	  AC_CHECK_FUNCS(dcgettext)
-	  MSGFMT_OPTS=
-	  AC_MSG_CHECKING([if msgfmt accepts -c])
-	  GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: test 1.0\n"
-"PO-Revision-Date: 2007-02-15 12:01+0100\n"
-"Last-Translator: test <foo@bar.xx>\n"
-"Language-Team: C <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])])
-	  AC_SUBST(MSGFMT_OPTS)
-	  AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-	  GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-	    [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-	  AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
-			 return _nl_msg_cat_cntr],
-	    [CATOBJEXT=.gmo 
-             DATADIRNAME=share],
-	    [case $host in
-	    *-*-solaris*)
-	    dnl On Solaris, if bind_textdomain_codeset is in libc,
-	    dnl GNU format message catalog is always supported,
-            dnl since both are added to the libc all together.
-	    dnl Hence, we'd like to go with DATADIRNAME=share and
-	    dnl and CATOBJEXT=.gmo in this case.
-            AC_CHECK_FUNC(bind_textdomain_codeset,
-	      [CATOBJEXT=.gmo 
-               DATADIRNAME=share],
-	      [CATOBJEXT=.mo
-               DATADIRNAME=lib])
-	    ;;
-	    *-*-openbsd*)
-	    CATOBJEXT=.mo
-            DATADIRNAME=share
-	    ;;
-	    *)
-	    CATOBJEXT=.mo
-            DATADIRNAME=lib
-	    ;;
-	    esac])
-          LIBS="$glib_save_LIBS"
-	  INSTOBJEXT=.mo
-	else
-	  gt_cv_have_gettext=no
-	fi
-      fi
-    ])
-
-    if test "$gt_cv_have_gettext" = "yes" ; then
-      AC_DEFINE(ENABLE_NLS, 1,
-        [always defined to indicate that i18n is enabled])
-    fi
-
-    dnl Test whether we really found GNU xgettext.
-    if test "$XGETTEXT" != ":"; then
-      dnl If it is not GNU xgettext we define it as : so that the
-      dnl Makefiles still can work.
-      if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
-        : ;
-      else
-        AC_MSG_RESULT(
-	  [found xgettext program is not GNU xgettext; ignore it])
-        XGETTEXT=":"
-      fi
-    fi
-
-    # We need to process the po/ directory.
-    POSUB=po
-
-    AC_OUTPUT_COMMANDS(
-      [case "$CONFIG_FILES" in *po/Makefile.in*)
-        sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
-      esac])
-
-    dnl These rules are solely for the distribution goal.  While doing this
-    dnl we only have to keep exactly one list of the available catalogs
-    dnl in configure.ac.
-    for lang in $ALL_LINGUAS; do
-      GMOFILES="$GMOFILES $lang.gmo"
-      POFILES="$POFILES $lang.po"
-    done
-
-    dnl Make all variables we use known to autoconf.
-    AC_SUBST(CATALOGS)
-    AC_SUBST(CATOBJEXT)
-    AC_SUBST(DATADIRNAME)
-    AC_SUBST(GMOFILES)
-    AC_SUBST(INSTOBJEXT)
-    AC_SUBST(INTLLIBS)
-    AC_SUBST(PO_IN_DATADIR_TRUE)
-    AC_SUBST(PO_IN_DATADIR_FALSE)
-    AC_SUBST(POFILES)
-    AC_SUBST(POSUB)
-  ])
-
-# AM_GLIB_GNU_GETTEXT
-# -------------------
-# Do checks necessary for use of gettext. If a suitable implementation 
-# of gettext is found in either in libintl or in the C library,
-# it will set INTLLIBS to the libraries needed for use of gettext
-# and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable
-# gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST()
-# on various variables needed by the Makefile.in.in installed by 
-# glib-gettextize.
-dnl
-glib_DEFUN([GLIB_GNU_GETTEXT],
-  [AC_REQUIRE([AC_PROG_CC])dnl
-   
-   GLIB_LC_MESSAGES
-   GLIB_WITH_NLS
-
-   if test "$gt_cv_have_gettext" = "yes"; then
-     if test "x$ALL_LINGUAS" = "x"; then
-       LINGUAS=
-     else
-       AC_MSG_CHECKING(for catalogs to be installed)
-       NEW_LINGUAS=
-       for presentlang in $ALL_LINGUAS; do
-         useit=no
-         if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then
-           desiredlanguages="$LINGUAS"
-         else
-           desiredlanguages="$ALL_LINGUAS"
-         fi
-         for desiredlang in $desiredlanguages; do
- 	   # Use the presentlang catalog if desiredlang is
-           #   a. equal to presentlang, or
-           #   b. a variant of presentlang (because in this case,
-           #      presentlang can be used as a fallback for messages
-           #      which are not translated in the desiredlang catalog).
-           case "$desiredlang" in
-             "$presentlang"*) useit=yes;;
-           esac
-         done
-         if test $useit = yes; then
-           NEW_LINGUAS="$NEW_LINGUAS $presentlang"
-         fi
-       done
-       LINGUAS=$NEW_LINGUAS
-       AC_MSG_RESULT($LINGUAS)
-     fi
-
-     dnl Construct list of names of catalog files to be constructed.
-     if test -n "$LINGUAS"; then
-       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
-     fi
-   fi
-
-   dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
-   dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
-   dnl Try to locate is.
-   MKINSTALLDIRS=
-   if test -n "$ac_aux_dir"; then
-     MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
-   fi
-   if test -z "$MKINSTALLDIRS"; then
-     MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
-   fi
-   AC_SUBST(MKINSTALLDIRS)
-
-   dnl Generate list of files to be processed by xgettext which will
-   dnl be included in po/Makefile.
-   test -d po || mkdir po
-   if test "x$srcdir" != "x."; then
-     if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
-       posrcprefix="$srcdir/"
-     else
-       posrcprefix="../$srcdir/"
-     fi
-   else
-     posrcprefix="../"
-   fi
-   rm -f po/POTFILES
-   sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/$.*$ \\\\/\1/" \
-	< $srcdir/po/POTFILES.in > po/POTFILES
-  ])
-
-# AM_GLIB_DEFINE_LOCALEDIR(VARIABLE)
-# -------------------------------
-# Define VARIABLE to the location where catalog files will
-# be installed by po/Makefile.
-glib_DEFUN([GLIB_DEFINE_LOCALEDIR],
-[glib_REQUIRE([GLIB_GNU_GETTEXT])dnl
-glib_save_prefix="$prefix"
-glib_save_exec_prefix="$exec_prefix"
-glib_save_datarootdir="$datarootdir"
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-test "x$exec_prefix" = xNONE && exec_prefix=$prefix
-datarootdir=`eval echo "${datarootdir}"`
-if test "x$CATOBJEXT" = "x.mo" ; then
-  localedir=`eval echo "${libdir}/locale"`
-else
-  localedir=`eval echo "${datadir}/locale"`
-fi
-prefix="$glib_save_prefix"
-exec_prefix="$glib_save_exec_prefix"
-datarootdir="$glib_save_datarootdir"
-AC_DEFINE_UNQUOTED($1, "$localedir",
-  [Define the location where the catalogs will be installed])
-])
-
-dnl
-dnl Now the definitions that aclocal will find
-dnl
-ifdef(glib_configure_ac,[],[
-AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)])
-AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)])
-])dnl
-
-# GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL])
-# 
-# Create a temporary file with TEST-FILE as its contents and pass the
-# file name to PROGRAM.  Perform ACTION-IF-PASS if PROGRAM exits with
-# 0 and perform ACTION-IF-FAIL for any other exit status.
-AC_DEFUN([GLIB_RUN_PROG],
-[cat >conftest.foo <<_ACEOF
-$2
-_ACEOF
-if AC_RUN_LOG([$1 conftest.foo]); then
-  m4_ifval([$3], [$3], [:])
-m4_ifvaln([$4], [else $4])dnl
-echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD
-sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD
-fi])
-
-
-
-dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml])
-# serial 42 IT_PROG_INTLTOOL
-AC_DEFUN([IT_PROG_INTLTOOL], [
-AC_PREREQ([2.50])dnl
-AC_REQUIRE([AM_NLS])dnl
-
-case "$am__api_version" in
-    1.[01234])
-	AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool])
-    ;;
-    *)
-    ;;
-esac
-
-INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
-INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3`
-INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
-if test -n "$1"; then
-    AC_MSG_CHECKING([for intltool >= $1])
-    AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found])
-    test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" ||
-	AC_MSG_ERROR([Your intltool is too old.  You need intltool $1 or later.])
-fi
-
-AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update])
-AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge])
-AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract])
-if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then
-    AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.])
-fi
-
-if test -z "$AM_DEFAULT_VERBOSITY"; then
-  AM_DEFAULT_VERBOSITY=1
-fi
-AC_SUBST([AM_DEFAULT_VERBOSITY])
-
-INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))'
-INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))'
-INTLTOOL__v_MERGE_0='@echo "  ITMRG " [$]@;'
-AC_SUBST(INTLTOOL_V_MERGE)
-AC_SUBST(INTLTOOL__v_MERGE_)
-AC_SUBST(INTLTOOL__v_MERGE_0)
-
-INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))'
-intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))'
-intltool__v_merge_options_0='-q'
-AC_SUBST(INTLTOOL_V_MERGE_OPTIONS)
-AC_SUBST(intltool__v_merge_options_)
-AC_SUBST(intltool__v_merge_options_0)
-
-  INTLTOOL_DESKTOP_RULE='%.desktop:   %.desktop.in   $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-     INTLTOOL_KEYS_RULE='%.keys:      %.keys.in      $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-     INTLTOOL_PROP_RULE='%.prop:      %.prop.in      $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-      INTLTOOL_OAF_RULE='%.oaf:       %.oaf.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< [$]@'
-     INTLTOOL_PONG_RULE='%.pong:      %.pong.in      $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-   INTLTOOL_SERVER_RULE='%.server:    %.server.in    $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-    INTLTOOL_SHEET_RULE='%.sheet:     %.sheet.in     $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-       INTLTOOL_UI_RULE='%.ui:        %.ui.in        $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-      INTLTOOL_XML_RULE='%.xml:       %.xml.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then
-      INTLTOOL_XML_NOMERGE_RULE='%.xml:       %.xml.in       $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< [$]@'
-else
-      INTLTOOL_XML_NOMERGE_RULE='%.xml:       %.xml.in       $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.[$][$]RANDOM && mkdir [$][$]_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u [$][$]_it_tmp_dir $< [$]@ && rmdir [$][$]_it_tmp_dir'
-fi
-      INTLTOOL_XAM_RULE='%.xam:       %.xml.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-      INTLTOOL_KBD_RULE='%.kbd:       %.kbd.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-    INTLTOOL_CAVES_RULE='%.caves:     %.caves.in     $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-  INTLTOOL_SCHEMAS_RULE='%.schemas:   %.schemas.in   $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-    INTLTOOL_THEME_RULE='%.theme:     %.theme.in     $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
-    INTLTOOL_SERVICE_RULE='%.service: %.service.in   $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
-   INTLTOOL_POLICY_RULE='%.policy:    %.policy.in    $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
-
-_IT_SUBST(INTLTOOL_DESKTOP_RULE)
-_IT_SUBST(INTLTOOL_DIRECTORY_RULE)
-_IT_SUBST(INTLTOOL_KEYS_RULE)
-_IT_SUBST(INTLTOOL_PROP_RULE)
-_IT_SUBST(INTLTOOL_OAF_RULE)
-_IT_SUBST(INTLTOOL_PONG_RULE)
-_IT_SUBST(INTLTOOL_SERVER_RULE)
-_IT_SUBST(INTLTOOL_SHEET_RULE)
-_IT_SUBST(INTLTOOL_SOUNDLIST_RULE)
-_IT_SUBST(INTLTOOL_UI_RULE)
-_IT_SUBST(INTLTOOL_XAM_RULE)
-_IT_SUBST(INTLTOOL_KBD_RULE)
-_IT_SUBST(INTLTOOL_XML_RULE)
-_IT_SUBST(INTLTOOL_XML_NOMERGE_RULE)
-_IT_SUBST(INTLTOOL_CAVES_RULE)
-_IT_SUBST(INTLTOOL_SCHEMAS_RULE)
-_IT_SUBST(INTLTOOL_THEME_RULE)
-_IT_SUBST(INTLTOOL_SERVICE_RULE)
-_IT_SUBST(INTLTOOL_POLICY_RULE)
-
-# Check the gettext tools to make sure they are GNU
-AC_PATH_PROG(XGETTEXT, xgettext)
-AC_PATH_PROG(MSGMERGE, msgmerge)
-AC_PATH_PROG(MSGFMT, msgfmt)
-AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then
-    AC_MSG_ERROR([GNU gettext tools not found; required for intltool])
-fi
-xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`"
-mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`"
-mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`"
-if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then
-    AC_MSG_ERROR([GNU gettext tools not found; required for intltool])
-fi
-
-AC_PATH_PROG(INTLTOOL_PERL, perl)
-if test -z "$INTLTOOL_PERL"; then
-   AC_MSG_ERROR([perl not found])
-fi
-AC_MSG_CHECKING([for perl >= 5.8.1])
-$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1
-if test $? -ne 0; then
-   AC_MSG_ERROR([perl 5.8.1 is required for intltool])
-else
-   IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"`
-   AC_MSG_RESULT([$IT_PERL_VERSION])
-fi
-if test "x$2" != "xno-xml"; then
-   AC_MSG_CHECKING([for XML::Parser])
-   if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then
-       AC_MSG_RESULT([ok])
-   else
-       AC_MSG_ERROR([XML::Parser perl module is required for intltool])
-   fi
-fi
-
-# Substitute ALL_LINGUAS so we can use it in po/Makefile
-AC_SUBST(ALL_LINGUAS)
-
-# Set DATADIRNAME correctly if it is not set yet
-# (copied from glib-gettext.m4)
-if test -z "$DATADIRNAME"; then
-  AC_LINK_IFELSE(
-    [AC_LANG_PROGRAM([[]],
-                     [[extern int _nl_msg_cat_cntr;
-                       return _nl_msg_cat_cntr]])],
-    [DATADIRNAME=share],
-    [case $host in
-    *-*-solaris*)
-    dnl On Solaris, if bind_textdomain_codeset is in libc,
-    dnl GNU format message catalog is always supported,
-    dnl since both are added to the libc all together.
-    dnl Hence, we'd like to go with DATADIRNAME=share
-    dnl in this case.
-    AC_CHECK_FUNC(bind_textdomain_codeset,
-      [DATADIRNAME=share], [DATADIRNAME=lib])
-    ;;
-    *)
-    [DATADIRNAME=lib]
-    ;;
-    esac])
-fi
-AC_SUBST(DATADIRNAME)
-
-IT_PO_SUBDIR([po])
-
-])
-
-
-# IT_PO_SUBDIR(DIRNAME)
-# ---------------------
-# All po subdirs have to be declared with this macro; the subdir "po" is
-# declared by IT_PROG_INTLTOOL.
-#
-AC_DEFUN([IT_PO_SUBDIR],
-[AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS.
-dnl
-dnl The following CONFIG_COMMANDS should be executed at the very end
-dnl of config.status.
-AC_CONFIG_COMMANDS_PRE([
-  AC_CONFIG_COMMANDS([$1/stamp-it], [
-    if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" > /dev/null ]; then
-       AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.])
-    fi
-    rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp"
-    >"$1/stamp-it.tmp"
-    [sed '/^#/d
-	 s/^[[].*] *//
-	 /^[ 	]*$/d
-	'"s|^|	$ac_top_srcdir/|" \
-      "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES"
-    ]
-    [sed '/^POTFILES =/,/[^\\]$/ {
-		/^POTFILES =/!d
-		r $1/POTFILES
-	  }
-	 ' "$1/Makefile.in" >"$1/Makefile"]
-    rm -f "$1/Makefile.tmp"
-    mv "$1/stamp-it.tmp" "$1/stamp-it"
-  ])
-])dnl
-])
-
-# _IT_SUBST(VARIABLE)
-# -------------------
-# Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST
-#
-AC_DEFUN([_IT_SUBST],
-[
-AC_SUBST([$1])
-m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])])
-]
-)
-
-# deprecated macros
-AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL])
-# A hint is needed for aclocal from Automake <= 1.9.4:
-# AC_DEFUN([AC_PROG_INTLTOOL], ...)
-
-
-# nls.m4 serial 5 (gettext-0.18)
-dnl Copyright (C) 1995-2003, 2005-2006, 2008-2013 Free Software Foundation,
-dnl Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-
-AC_PREREQ([2.50])
-
-AC_DEFUN([AM_NLS],
-[
-  AC_MSG_CHECKING([whether NLS is requested])
-  dnl Default is enabled NLS
-  AC_ARG_ENABLE([nls],
-    [  --disable-nls           do not use Native Language Support],
-    USE_NLS=$enableval, USE_NLS=yes)
-  AC_MSG_RESULT([$USE_NLS])
-  AC_SUBST([USE_NLS])
-])
-
-# Copyright (C) 2002-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.13'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.13.4], [],
-      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too.  Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.13.4])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
-# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is '.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*$.*$"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ([2.52])dnl
- m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
-      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
-      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
-      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
-      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                    [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named 'D' -- because '-MD' means "put the output
-  # in D".
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*$[a-zA-Z0-9]*$)$/\1/p'] < ./depcomp`
-  fi
-  am__universal=false
-  m4_case([$1], [CC],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac],
-    [CXX],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac])
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
-      # Solaris 10 /bin/sh.
-      echo '/* dummy */' > sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with '-c' and '-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle '-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs.
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # After this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested.
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok '-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE([dependency-tracking], [dnl
-AS_HELP_STRING(
-  [--enable-dependency-tracking],
-  [do not reject slow dependency extractors])
-AS_HELP_STRING(
-  [--disable-dependency-tracking],
-  [speeds up one-time build])])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-  am__nodep='_no'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-AC_SUBST([am__nodep])dnl
-_AM_SUBST_NOTMAKE([am__nodep])dnl
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
-  # Older Autoconf quotes --file arguments for eval, but not when files
-  # are listed without --file.  Let's play safe and only enable the eval
-  # if we detect the quoting.
-  case $CONFIG_FILES in
-  *\'*) eval set x "$CONFIG_FILES" ;;
-  *)   set x $CONFIG_FILES ;;
-  esac
-  shift
-  for mf
-  do
-    # Strip MF so we end up with the name of the file.
-    mf=`echo "$mf" | sed -e 's/:.*$//'`
-    # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named 'Makefile.in', but
-    # some people rename them; so instead we look at the file content.
-    # Grep'ing the first line is not enough: some people post-process
-    # each Makefile.in and add a new line on top of each file to say so.
-    # Grep'ing the whole file is not good either: AIX grep has a line
-    # limit of 2048, but all sed's we know have understand at least 4000.
-    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-      dirpart=`AS_DIRNAME("$mf")`
-    else
-      continue
-    fi
-    # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running 'make'.
-    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-    test -z "$DEPDIR" && continue
-    am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "$am__include" && continue
-    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # Find all dependency output files, they are included files with
-    # $(DEPDIR) in their names.  We invoke sed twice because it is the
-    # simplest approach to changing $(DEPDIR) to its actual value in the
-    # expansion.
-    for file in `sed -n "
-      s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
-      # Make sure the directory exists.
-      test -f "$dirpart/$file" && continue
-      fdir=`AS_DIRNAME(["$file"])`
-      AS_MKDIR_P([$dirpart/$fdir])
-      # echo "creating $dirpart/$file"
-      echo '# dummy' > "$dirpart/$file"
-    done
-  done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each '.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.65])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[AC_DIAGNOSE([obsolete],
-             [$0: two- and three-arguments forms are deprecated.])
-m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(
-  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
-  [ok:ok],,
-  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
- AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
-AM_MISSING_PROG([AUTOCONF], [autoconf])
-AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
-AM_MISSING_PROG([AUTOHEADER], [autoheader])
-AM_MISSING_PROG([MAKEINFO], [makeinfo])
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-# For better backward compatibility.  To be removed once Automake 1.9.x
-# dies out for good.  For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-			     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-		  [_AM_DEPENDENCIES([CC])],
-		  [m4_define([AC_PROG_CC],
-			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-		  [_AM_DEPENDENCIES([CXX])],
-		  [m4_define([AC_PROG_CXX],
-			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-		  [_AM_DEPENDENCIES([OBJC])],
-		  [m4_define([AC_PROG_OBJC],
-			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
-		  [_AM_DEPENDENCIES([OBJCXX])],
-		  [m4_define([AC_PROG_OBJCXX],
-			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
-])
-AC_REQUIRE([AM_SILENT_RULES])dnl
-dnl The testsuite driver may need to know about EXEEXT, so add the
-dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
-dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
-  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $_am_arg | $_am_arg:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-  *)
-    install_sh="\${SHELL} $am_aux_dir/install-sh"
-  esac
-fi
-AC_SUBST([install_sh])])
-
-# Copyright (C) 2003-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
-# From Jim Meyering
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MAINTAINER_MODE([DEFAULT-MODE])
-# ----------------------------------
-# Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless 'enable' is passed literally.
-# For symmetry, 'disable' may be passed as well.  Anyway, the user
-# can override the default with the --enable/--disable switch.
-AC_DEFUN([AM_MAINTAINER_MODE],
-[m4_case(m4_default([$1], [disable]),
-       [enable], [m4_define([am_maintainer_other], [disable])],
-       [disable], [m4_define([am_maintainer_other], [enable])],
-       [m4_define([am_maintainer_other], [enable])
-        m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode's default is 'disable' unless 'enable' is passed
-  AC_ARG_ENABLE([maintainer-mode],
-    [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
-      am_maintainer_other[ make rules and dependencies not useful
-      (and sometimes confusing) to the casual installer])],
-    [USE_MAINTAINER_MODE=$enableval],
-    [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
-  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
-  AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST([MAINT])dnl
-]
-)
-
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it is modern enough.
-# If it is, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-  *)
-    MISSING="\${SHELL} $am_aux_dir/missing" ;;
-  esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --is-lightweight"; then
-  am_missing_run="$MISSING "
-else
-  am_missing_run=
-  AC_MSG_WARN(['missing' script is too old or missing])
-fi
-])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# --------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# AM_PATH_PYTHON([MINIMUM-VERSION], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-# ---------------------------------------------------------------------------
-# Adds support for distributing Python modules and packages.  To
-# install modules, copy them to $(pythondir), using the python_PYTHON
-# automake variable.  To install a package with the same name as the
-# automake package, install to $(pkgpythondir), or use the
-# pkgpython_PYTHON automake variable.
-#
-# The variables $(pyexecdir) and $(pkgpyexecdir) are provided as
-# locations to install python extension modules (shared libraries).
-# Another macro is required to find the appropriate flags to compile
-# extension modules.
-#
-# If your package is configured with a different prefix to python,
-# users will have to add the install directory to the PYTHONPATH
-# environment variable, or create a .pth file (see the python
-# documentation for details).
-#
-# If the MINIMUM-VERSION argument is passed, AM_PATH_PYTHON will
-# cause an error if the version of python installed on the system
-# doesn't meet the requirement.  MINIMUM-VERSION should consist of
-# numbers and dots only.
-AC_DEFUN([AM_PATH_PYTHON],
- [
-  dnl Find a Python interpreter.  Python versions prior to 2.0 are not
-  dnl supported. (2.0 was released on October 16, 2000).
-  m4_define_default([_AM_PYTHON_INTERPRETER_LIST],
-[python python2 python3 python3.3 python3.2 python3.1 python3.0 python2.7 dnl
- python2.6 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0])
-
-  AC_ARG_VAR([PYTHON], [the Python interpreter])
-
-  m4_if([$1],[],[
-    dnl No version check is needed.
-    # Find any Python interpreter.
-    if test -z "$PYTHON"; then
-      AC_PATH_PROGS([PYTHON], _AM_PYTHON_INTERPRETER_LIST, :)
-    fi
-    am_display_PYTHON=python
-  ], [
-    dnl A version check is needed.
-    if test -n "$PYTHON"; then
-      # If the user set $PYTHON, use it and don't search something else.
-      AC_MSG_CHECKING([whether $PYTHON version is >= $1])
-      AM_PYTHON_CHECK_VERSION([$PYTHON], [$1],
-			      [AC_MSG_RESULT([yes])],
-			      [AC_MSG_RESULT([no])
-			       AC_MSG_ERROR([Python interpreter is too old])])
-      am_display_PYTHON=$PYTHON
-    else
-      # Otherwise, try each interpreter until we find one that satisfies
-      # VERSION.
-      AC_CACHE_CHECK([for a Python interpreter with version >= $1],
-	[am_cv_pathless_PYTHON],[
-	for am_cv_pathless_PYTHON in _AM_PYTHON_INTERPRETER_LIST none; do
-	  test "$am_cv_pathless_PYTHON" = none && break
-	  AM_PYTHON_CHECK_VERSION([$am_cv_pathless_PYTHON], [$1], [break])
-	done])
-      # Set $PYTHON to the absolute path of $am_cv_pathless_PYTHON.
-      if test "$am_cv_pathless_PYTHON" = none; then
-	PYTHON=:
-      else
-        AC_PATH_PROG([PYTHON], [$am_cv_pathless_PYTHON])
-      fi
-      am_display_PYTHON=$am_cv_pathless_PYTHON
-    fi
-  ])
-
-  if test "$PYTHON" = :; then
-  dnl Run any user-specified action, or abort.
-    m4_default([$3], [AC_MSG_ERROR([no suitable Python interpreter found])])
-  else
-
-  dnl Query Python for its version number.  Getting [:3] seems to be
-  dnl the best way to do this; it's what "site.py" does in the standard
-  dnl library.
-
-  AC_CACHE_CHECK([for $am_display_PYTHON version], [am_cv_python_version],
-    [am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[[:3]])"`])
-  AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])
-
-  dnl Use the values of $prefix and $exec_prefix for the corresponding
-  dnl values of PYTHON_PREFIX and PYTHON_EXEC_PREFIX.  These are made
-  dnl distinct variables so they can be overridden if need be.  However,
-  dnl general consensus is that you shouldn't need this ability.
-
-  AC_SUBST([PYTHON_PREFIX], ['${prefix}'])
-  AC_SUBST([PYTHON_EXEC_PREFIX], ['${exec_prefix}'])
-
-  dnl At times (like when building shared libraries) you may want
-  dnl to know which OS platform Python thinks this is.
-
-  AC_CACHE_CHECK([for $am_display_PYTHON platform], [am_cv_python_platform],
-    [am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"`])
-  AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform])
-
-  # Just factor out some code duplication.
-  am_python_setup_sysconfig="\
-import sys
-# Prefer sysconfig over distutils.sysconfig, for better compatibility
-# with python 3.x.  See automake bug#10227.
-try:
-    import sysconfig
-except ImportError:
-    can_use_sysconfig = 0
-else:
-    can_use_sysconfig = 1
-# Can't use sysconfig in CPython 2.7, since it's broken in virtualenvs:
-# <https://github.com/pypa/virtualenv/issues/118>
-try:
-    from platform import python_implementation
-    if python_implementation() == 'CPython' and sys.version[[:3]] == '2.7':
-        can_use_sysconfig = 0
-except ImportError:
-    pass"
-
-  dnl Set up 4 directories:
-
-  dnl pythondir -- where to install python scripts.  This is the
-  dnl   site-packages directory, not the python standard library
-  dnl   directory like in previous automake betas.  This behavior
-  dnl   is more consistent with lispdir.m4 for example.
-  dnl Query distutils for this directory.
-  AC_CACHE_CHECK([for $am_display_PYTHON script directory],
-    [am_cv_python_pythondir],
-    [if test "x$prefix" = xNONE
-     then
-       am_py_prefix=$ac_default_prefix
-     else
-       am_py_prefix=$prefix
-     fi
-     am_cv_python_pythondir=`$PYTHON -c "
-$am_python_setup_sysconfig
-if can_use_sysconfig:
-    sitedir = sysconfig.get_path('purelib', vars={'base':'$am_py_prefix'})
-else:
-    from distutils import sysconfig
-    sitedir = sysconfig.get_python_lib(0, 0, prefix='$am_py_prefix')
-sys.stdout.write(sitedir)"`
-     case $am_cv_python_pythondir in
-     $am_py_prefix*)
-       am__strip_prefix=`echo "$am_py_prefix" | sed 's|.|.|g'`
-       am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix,$PYTHON_PREFIX,"`
-       ;;
-     *)
-       case $am_py_prefix in
-         /usr|/System*) ;;
-         *)
-	  am_cv_python_pythondir=$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages
-	  ;;
-       esac
-       ;;
-     esac
-    ])
-  AC_SUBST([pythondir], [$am_cv_python_pythondir])
-
-  dnl pkgpythondir -- $PACKAGE directory under pythondir.  Was
-  dnl   PYTHON_SITE_PACKAGE in previous betas, but this naming is
-  dnl   more consistent with the rest of automake.
-
-  AC_SUBST([pkgpythondir], [\${pythondir}/$PACKAGE])
-
-  dnl pyexecdir -- directory for installing python extension modules
-  dnl   (shared libraries)
-  dnl Query distutils for this directory.
-  AC_CACHE_CHECK([for $am_display_PYTHON extension module directory],
-    [am_cv_python_pyexecdir],
-    [if test "x$exec_prefix" = xNONE
-     then
-       am_py_exec_prefix=$am_py_prefix
-     else
-       am_py_exec_prefix=$exec_prefix
-     fi
-     am_cv_python_pyexecdir=`$PYTHON -c "
-$am_python_setup_sysconfig
-if can_use_sysconfig:
-    sitedir = sysconfig.get_path('platlib', vars={'platbase':'$am_py_prefix'})
-else:
-    from distutils import sysconfig
-    sitedir = sysconfig.get_python_lib(1, 0, prefix='$am_py_prefix')
-sys.stdout.write(sitedir)"`
-     case $am_cv_python_pyexecdir in
-     $am_py_exec_prefix*)
-       am__strip_prefix=`echo "$am_py_exec_prefix" | sed 's|.|.|g'`
-       am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix,$PYTHON_EXEC_PREFIX,"`
-       ;;
-     *)
-       case $am_py_exec_prefix in
-         /usr|/System*) ;;
-         *)
-	   am_cv_python_pyexecdir=$PYTHON_EXEC_PREFIX/lib/python$PYTHON_VERSION/site-packages
-	   ;;
-       esac
-       ;;
-     esac
-    ])
-  AC_SUBST([pyexecdir], [$am_cv_python_pyexecdir])
-
-  dnl pkgpyexecdir -- $(pyexecdir)/$(PACKAGE)
-
-  AC_SUBST([pkgpyexecdir], [\${pyexecdir}/$PACKAGE])
-
-  dnl Run any user-specified action.
-  $2
-  fi
-
-])
-
-
-# AM_PYTHON_CHECK_VERSION(PROG, VERSION, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
-# ---------------------------------------------------------------------------
-# Run ACTION-IF-TRUE if the Python interpreter PROG has version >= VERSION.
-# Run ACTION-IF-FALSE otherwise.
-# This test uses sys.hexversion instead of the string equivalent (first
-# word of sys.version), in order to cope with versions such as 2.2c1.
-# This supports Python 2.0 or higher. (2.0 was released on October 16, 2000).
-AC_DEFUN([AM_PYTHON_CHECK_VERSION],
- [prog="import sys
-# split strings by '.' and convert to numeric.  Append some zeros
-# because we need at least 4 digits for the hex conversion.
-# map returns an iterator in Python 3.0 and a list in 2.x
-minver = list(map(int, '$2'.split('.'))) + [[0, 0, 0]]
-minverhex = 0
-# xrange is not present in Python 3.0 and range returns an iterator
-for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[[i]]
-sys.exit(sys.hexversion < minverhex)"
-  AS_IF([AM_RUN_LOG([$1 -c "$prog"])], [$3], [$4])])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name.  Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
-  *[[\\\"\#\$\&\'\`$am_lf]]*)
-    AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
-  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
-    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   am_has_slept=no
-   for am_try in 1 2; do
-     echo "timestamp, slept: $am_has_slept" > conftest.file
-     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-     if test "$[*]" = "X"; then
-	# -L didn't work.
-	set X `ls -t "$srcdir/configure" conftest.file`
-     fi
-     if test "$[*]" != "X $srcdir/configure conftest.file" \
-	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-	# If neither matched, then we have a broken ls.  This can happen
-	# if, for instance, CONFIG_SHELL is bash and it inherits a
-	# broken ls alias from the environment.  This has actually
-	# happened.  Such a system could not be considered "sane".
-	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-  alias in your environment])
-     fi
-     if test "$[2]" = conftest.file || test $am_try -eq 2; then
-       break
-     fi
-     # Just in case.
-     sleep 1
-     am_has_slept=yes
-   done
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT([yes])
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
-  ( sleep 1 ) &
-  am_sleep_pid=$!
-fi
-AC_CONFIG_COMMANDS_PRE(
-  [AC_MSG_CHECKING([that generated files are newer than configure])
-   if test -n "$am_sleep_pid"; then
-     # Hide warnings about reused PIDs.
-     wait $am_sleep_pid 2>/dev/null
-   fi
-   AC_MSG_RESULT([done])])
-rm -f conftest.file
-])
-
-# Copyright (C) 2009-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SILENT_RULES([DEFAULT])
-# --------------------------
-# Enable less verbose build rules; with the default set to DEFAULT
-# ("yes" being less verbose, "no" or empty being verbose).
-AC_DEFUN([AM_SILENT_RULES],
-[AC_ARG_ENABLE([silent-rules], [dnl
-AS_HELP_STRING(
-  [--enable-silent-rules],
-  [less verbose build output (undo: "make V=1")])
-AS_HELP_STRING(
-  [--disable-silent-rules],
-  [verbose build output (undo: "make V=0")])dnl
-])
-case $enable_silent_rules in @%:@ (((
-  yes) AM_DEFAULT_VERBOSITY=0;;
-   no) AM_DEFAULT_VERBOSITY=1;;
-    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
-esac
-dnl
-dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
-dnl do not support nested variable expansions.
-dnl See automake bug#9928 and bug#10237.
-am_make=${MAKE-make}
-AC_CACHE_CHECK([whether $am_make supports nested variables],
-   [am_cv_make_support_nested_variables],
-   [if AS_ECHO([['TRUE=$(BAR$(V))
-BAR0=false
-BAR1=true
-V=1
-am__doit:
-	@$(TRUE)
-.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
-  am_cv_make_support_nested_variables=yes
-else
-  am_cv_make_support_nested_variables=no
-fi])
-if test $am_cv_make_support_nested_variables = yes; then
-  dnl Using '$V' instead of '$(V)' breaks IRIX make.
-  AM_V='$(V)'
-  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
-else
-  AM_V=$AM_DEFAULT_VERBOSITY
-  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
-fi
-AC_SUBST([AM_V])dnl
-AM_SUBST_NOTMAKE([AM_V])dnl
-AC_SUBST([AM_DEFAULT_V])dnl
-AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
-AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
-AM_BACKSLASH='\'
-AC_SUBST([AM_BACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
-])
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor 'install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in "make install-strip", and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip".  However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# --------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of 'v7', 'ustar', or 'pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-#
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.  Yes, it's still used
-# in the wild :-(  We should find a proper way to deprecate it ...
-AC_SUBST([AMTAR], ['$${TAR-tar}'])
-
-# We'll loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-
-m4_if([$1], [v7],
-  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
-
-  [m4_case([$1],
-    [ustar],
-     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
-      # There is notably a 21 bits limit for the UID and the GID.  In fact,
-      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
-      # and bug#13588).
-      am_max_uid=2097151 # 2^21 - 1
-      am_max_gid=$am_max_uid
-      # The $UID and $GID variables are not portable, so we need to resort
-      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
-      # below are definitely unexpected, so allow the users to see them
-      # (that is, avoid stderr redirection).
-      am_uid=`id -u || echo unknown`
-      am_gid=`id -g || echo unknown`
-      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
-      if test $am_uid -le $am_max_uid; then
-         AC_MSG_RESULT([yes])
-      else
-         AC_MSG_RESULT([no])
-         _am_tools=none
-      fi
-      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
-      if test $am_gid -le $am_max_gid; then
-         AC_MSG_RESULT([yes])
-      else
-        AC_MSG_RESULT([no])
-        _am_tools=none
-      fi],
-
-  [pax],
-    [],
-
-  [m4_fatal([Unknown tar format])])
-
-  AC_MSG_CHECKING([how to create a $1 tar archive])
-
-  # Go ahead even if we have the value already cached.  We do so because we
-  # need to set the values for the 'am__tar' and 'am__untar' variables.
-  _am_tools=${am_cv_prog_tar_$1-$_am_tools}
-
-  for _am_tool in $_am_tools; do
-    case $_am_tool in
-    gnutar)
-      for _am_tar in tar gnutar gtar; do
-        AM_RUN_LOG([$_am_tar --version]) && break
-      done
-      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-      am__untar="$_am_tar -xf -"
-      ;;
-    plaintar)
-      # Must skip GNU tar: if it does not support --format= it doesn't create
-      # ustar tarball either.
-      (tar --version) >/dev/null 2>&1 && continue
-      am__tar='tar chf - "$$tardir"'
-      am__tar_='tar chf - "$tardir"'
-      am__untar='tar xf -'
-      ;;
-    pax)
-      am__tar='pax -L -x $1 -w "$$tardir"'
-      am__tar_='pax -L -x $1 -w "$tardir"'
-      am__untar='pax -r'
-      ;;
-    cpio)
-      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-      am__untar='cpio -i -H $1 -d'
-      ;;
-    none)
-      am__tar=false
-      am__tar_=false
-      am__untar=false
-      ;;
-    esac
-
-    # If the value was cached, stop now.  We just wanted to have am__tar
-    # and am__untar set.
-    test -n "${am_cv_prog_tar_$1}" && break
-
-    # tar/untar a dummy directory, and stop if the command works.
-    rm -rf conftest.dir
-    mkdir conftest.dir
-    echo GrepMe > conftest.dir/file
-    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-    rm -rf conftest.dir
-    if test -s conftest.tar; then
-      AM_RUN_LOG([$am__untar <conftest.tar])
-      AM_RUN_LOG([cat conftest.dir/file])
-      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-    fi
-  done
-  rm -rf conftest.dir
-
-  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-  AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-

pykolab-0.7.tar.gz/bin/gen-ldif Added

@@ -0,0 +1,44 @@
+#!/bin/bash
+
+[ ! -z "$2" ] && domain=$2 || domain="example.org"
+[ ! -z "$3" ] && rootdn=$3 || rootdn="dc=example,dc=org"
+[ ! -z "$4" ] && ou=$4 || ou="ou=People"
+
+echo "dn: ${ou},${rootdn}"
+echo "objectClass: top"
+echo "objectClass: organizationalunit"
+echo "$(echo ${ou} | cut -d'=' -f 1): $(echo ${ou} | cut -d'=' -f 2)"
+echo 'aci: (targetattr ="userpassword || telephonenumber || facsimiletelephonenumber")(version 3.0; acl "Allow self entry modification"; allow (write)(userdn = "ldap:///self");)'
+echo ""
+
+i=0
+while [ $i -lt 0$1 ]; do
+
+    givenname=`head -c 200 /dev/urandom | tr -dc A-Za-z | head -c5`
+    surname=`head -c 200 /dev/urandom | tr -dc A-Za-z | head -c10`
+
+    givenname="$(echo ${givenname:0:1} | tr '[:lower:]' '[:upper:]')$(echo ${givenname:1} | tr '[:upper:]' '[:lower:]')"
+    givenname_lower="$(echo ${givenname} | tr '[:upper:]' '[:lower:]')"
+    surname="$(echo ${surname:0:1} | tr '[:lower:]' '[:upper:]')$(echo ${surname:1} | tr '[:upper:]' '[:lower:]')"
+    surname_lower="$(echo ${surname} | tr '[:upper:]' '[:lower:]')"
+
+    uid="$(echo ${givenname:0:1}.${surname} | tr '[:upper:]' '[:lower:]')"
+
+    userpassword="VerySecret"
+
+    echo "dn: uid=$uid,${ou},${rootdn}"
+    echo "uid: $uid"
+    echo "givenName: $givenname"
+    echo "objectClass: top"
+    echo "objectClass: person"
+    echo "objectClass: inetOrgPerson"
+    echo "objectClass: organizationalPerson"
+    echo "objectClass: mailrecipient"
+    echo "sn: $surname"
+    echo "cn: $givenname $surname"
+    echo "mail: ${givenname_lower}.${surname_lower}@${domain}"
+    echo "userPassword: {SSHA}zJ3oU5kqtS3MxnLWmKpnE7+eGVbmQKmj"
+    echo ""
+
+    let i++
+done

pykolab-0.7.tar.gz/bin/pykolab-update-lang Added

pykolab-0.7.tar.gz/conf/Makefile.in Deleted

@@ -1,485 +0,0 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = conf
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(confdir)"
-DATA = $(conf_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALL_LINGUAS = @ALL_LINGUAS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DATESTAMP = @DATESTAMP@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GMOFILES = @GMOFILES@
-GMSGFMT = @GMSGFMT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLLIBS = @INTLLIBS@
-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
-INTLTOOL_MERGE = @INTLTOOL_MERGE@
-INTLTOOL_PERL = @INTLTOOL_PERL@
-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
-INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
-INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
-INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
-INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGFMT_OPTS = @MSGFMT_OPTS@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POFILES = @POFILES@
-POSUB = @POSUB@
-PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
-PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
-PYTHON = @PYTHON@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RELEASE = @RELEASE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-intltool__v_merge_options_ = @intltool__v_merge_options_@
-intltool__v_merge_options_0 = @intltool__v_merge_options_0@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTRA_DIST = \
-	kolab.conf
-
-confdir = $(sysconfdir)/kolab
-conf_DATA = \
-	kolab.conf
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu conf/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu conf/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-confDATA: $(conf_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(conf_DATA)'; test -n "$(confdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(confdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(confdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(confdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(confdir)" || exit $$?; \
-	done
-
-uninstall-confDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(conf_DATA)'; test -n "$(confdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(confdir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(confdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-confDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-confDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
-	ctags-am distclean distclean-generic distdir dvi dvi-am html \
-	html-am info info-am install install-am install-confDATA \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags-am uninstall uninstall-am \
-	uninstall-confDATA
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

pykolab-0.7.tar.gz/conf/kolab-test-example.conf Added

@@ -0,0 +1,32 @@
+[postfix]
+leave_this_one_to_me = why_dont_cha
+
+[mysql]
+db_uri = mysql://username:password@hostname/database
+
+[kolab]
+imap_backend = cyrus-imapd
+auth_mechanism = ldap
+mta = postfix
+archving = openbenno
+
+[ldap]
+user_base_dn = ou=People,%(base_dn)s
+base_dn = dc=localdomain
+uri = ldap://localhost
+bind_dn = cn=Directory Manager
+group_base_dn = ou=Groups,%(base_dn)s
+bind_pw = verysecret
+
+[testing]
+admin_password = alsoverysecret
+admin_login = manager
+server = 127.0.0.1
+users = [
+        { 'givenname': 'john',  'sn': 'doe',    'domain': 'doe.org',    'password': 'Welcome2KolabSystems' },
+        { 'givenname': 'joe',   'sn': 'doe',    'domain': 'doe.org',    'password': 'Welcome2KolabSystems' },
+        { 'givenname': 'max',   'sn': 'doe',    'domain': 'doe.org',    'password': 'Welcome2KolabSystems' },
+        { 'givenname': 'min',   'sn': 'doe',    'domain': 'doe.org',    'password': 'Welcome2KolabSystems' },
+        { 'givenname': 'joe',   'sn': 'sixpack','domain': 'sixpack.com','password': 'Welcome2KolabSystems' },
+        { 'givenname': 'max',   'sn': 'imum',   'domain': 'imum.net',   'password': 'Welcome2KolabSystems' },
+    ]

pykolab-0.7.tar.gz/configure Deleted

@@ -1,7071 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for pykolab 0.7.
-#
-#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\$.*\$"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
-	expr "X$arg" : "X\$.*\$$as_nl";
-	arg=`expr "X$arg" : ".*$as_nl\$.*\$"`;;
-      esac;
-      expr "X$arg" : "X\$.*\$" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" ""	$as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Use a proper internal environment variable to ensure we don't fall
-  # into an infinite loop, continuously re-executing ourselves.
-  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
-    _as_can_reexec=no; export _as_can_reexec;
-    # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
-  fi
-  # We don't want this to propagate to other subprocesses.
-          { _as_can_reexec=; unset _as_can_reexec;}
-if test "x$CONFIG_SHELL" = x; then
-  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-"
-  as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
-  exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
-  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
-  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
-  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
-  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
-  if (eval "$as_required") 2>/dev/null; then :
-  as_have_required=yes
-else
-  as_have_required=no
-fi
-  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  as_found=:
-  case $as_dir in #(
-	 /*)
-	   for as_base in sh bash ksh sh5; do
-	     # Try only shells that exist, to save several forks.
-	     as_shell=$as_dir/$as_base
-	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  CONFIG_SHELL=$as_shell as_have_required=yes
-		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  break 2
-fi
-fi
-	   done;;
-       esac
-  as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
-	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
-  CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
-      if test "x$CONFIG_SHELL" != x; then :
-  export CONFIG_SHELL
-             # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
-fi
-
-    if test x$as_have_required = xno; then :
-  $as_echo "$0: This script requires a shell more modern than all"
-  $as_echo "$0: the shells that I found on your system."
-  if test x${ZSH_VERSION+set} = xset ; then
-    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
-    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
-  else
-    $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
-$0: including any error possibly output before this
-$0: message. Then install a modern shell, or manually run
-$0: the script under such a shell if you do have one."
-  fi
-  exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X$//$[^/]' \| \
-	 X"$as_dir" : 'X$//$$' \| \
-	 X"$as_dir" : 'X$/$' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/\/$[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/\/$$/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/$.*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
-  test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '$a$' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*$...$'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \
-	 X"$0" : 'X$//$$' \| \
-	 X"$0" : 'X$/$' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/$[^/][^/]*$\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/$\/\/$$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/$\/$.*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
-  as_lineno_1=$LINENO as_lineno_1a=$LINENO
-  as_lineno_2=$LINENO as_lineno_2a=$LINENO
-  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
-  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
-  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO$[^'$as_cr_alnum'_].*\n$$.*$/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
-  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
-  # already done that, so ensure we don't try to do so again and fall
-  # in an infinite loop.  This has already happened in practice.
-  _as_can_reexec=no; export _as_can_reexec
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T='	';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -pR'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -pR'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -pR'
-  fi
-else
-  as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='pykolab'
-PACKAGE_TARNAME='pykolab'
-PACKAGE_VERSION='0.7'
-PACKAGE_STRING='pykolab 0.7'
-PACKAGE_BUGREPORT=''
-PACKAGE_URL=''
-
-ac_unique_file="pykolab/constants.py.in"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-#  include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_STRING_H
-# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-#  include <memory.h>
-# endif
-# include <string.h>
-#endif
-#ifdef HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#ifdef HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='am__EXEEXT_FALSE
-am__EXEEXT_TRUE
-LTLIBOBJS
-LIBOBJS
-DATESTAMP
-ENTERPRISE_FALSE
-ENTERPRISE_TRUE
-LN_S
-ALL_LINGUAS
-INTLTOOL_PERL
-MSGMERGE
-INTLTOOL_POLICY_RULE
-INTLTOOL_SERVICE_RULE
-INTLTOOL_THEME_RULE
-INTLTOOL_SCHEMAS_RULE
-INTLTOOL_CAVES_RULE
-INTLTOOL_XML_NOMERGE_RULE
-INTLTOOL_XML_RULE
-INTLTOOL_KBD_RULE
-INTLTOOL_XAM_RULE
-INTLTOOL_UI_RULE
-INTLTOOL_SOUNDLIST_RULE
-INTLTOOL_SHEET_RULE
-INTLTOOL_SERVER_RULE
-INTLTOOL_PONG_RULE
-INTLTOOL_OAF_RULE
-INTLTOOL_PROP_RULE
-INTLTOOL_KEYS_RULE
-INTLTOOL_DIRECTORY_RULE
-INTLTOOL_DESKTOP_RULE
-intltool__v_merge_options_0
-intltool__v_merge_options_
-INTLTOOL_V_MERGE_OPTIONS
-INTLTOOL__v_MERGE_0
-INTLTOOL__v_MERGE_
-INTLTOOL_V_MERGE
-INTLTOOL_EXTRACT
-INTLTOOL_MERGE
-INTLTOOL_UPDATE
-MKINSTALLDIRS
-POSUB
-POFILES
-PO_IN_DATADIR_FALSE
-PO_IN_DATADIR_TRUE
-INTLLIBS
-INSTOBJEXT
-GMOFILES
-DATADIRNAME
-CATOBJEXT
-CATALOGS
-XGETTEXT
-GMSGFMT
-MSGFMT_OPTS
-MSGFMT
-USE_NLS
-EGREP
-GREP
-CPP
-am__fastdepCC_FALSE
-am__fastdepCC_TRUE
-CCDEPMODE
-am__nodep
-AMDEPBACKSLASH
-AMDEP_FALSE
-AMDEP_TRUE
-am__quote
-am__include
-DEPDIR
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-GETTEXT_PACKAGE
-pkgpyexecdir
-pyexecdir
-pkgpythondir
-pythondir
-PYTHON_PLATFORM
-PYTHON_EXEC_PREFIX
-PYTHON_PREFIX
-PYTHON_VERSION
-PYTHON
-MAINT
-MAINTAINER_MODE_FALSE
-MAINTAINER_MODE_TRUE
-AM_BACKSLASH
-AM_DEFAULT_VERBOSITY
-AM_DEFAULT_V
-AM_V
-am__untar
-am__tar
-AMTAR
-am__leading_dot
-SET_MAKE
-AWK
-mkdir_p
-MKDIR_P
-INSTALL_STRIP_PROGRAM
-STRIP
-install_sh
-MAKEINFO
-AUTOHEADER
-AUTOMAKE
-AUTOCONF
-ACLOCAL
-VERSION
-PACKAGE
-CYGPATH_W
-am__isrc
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-RELEASE
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-enable_silent_rules
-enable_maintainer_mode
-enable_dependency_tracking
-enable_nls
-enable_enterprise
-'
-      ac_precious_vars='build_alias
-host_alias
-target_alias
-PYTHON
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CPP'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval $ac_prev=\$ac_option
-    ac_prev=
-    continue
-  fi
-
-  case $ac_option in
-  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=$.*$'` ;;
-  *=)   ac_optarg= ;;
-  *)    ac_optarg=yes ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_dashdash$ac_option in
-  --)
-    ac_dashdash=yes ;;
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=*)
-    datadir=$ac_optarg ;;
-
-  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-  | --dataroo | --dataro | --datar)
-    ac_prev=datarootdir ;;
-  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-    datarootdir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*disable-$.*$'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
-	 ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=no ;;
-
-  -docdir | --docdir | --docdi | --doc | --do)
-    ac_prev=docdir ;;
-  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-    docdir=$ac_optarg ;;
-
-  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-    ac_prev=dvidir ;;
-  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-    dvidir=$ac_optarg ;;
-
-  -enable-* | --enable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*enable-$[^=]*$'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
-	 ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=\$ac_optarg ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-    ac_prev=htmldir ;;
-  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-  | --ht=*)
-    htmldir=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localedir | --localedir | --localedi | --localed | --locale)
-    ac_prev=localedir ;;
-  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-    localedir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst | --locals)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-    ac_prev=pdfdir ;;
-  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-    pdfdir=$ac_optarg ;;
-
-  -psdir | --psdir | --psdi | --psd | --ps)
-    ac_prev=psdir ;;
-  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-    psdir=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*with-$[^=]*$'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
-	 ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=\$ac_optarg ;;
-
-  -without-* | --without-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*without-$.*$'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
-	 ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=no ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x$[^=]*$='`
-    # Reject names that are not valid shell variable names.
-    case $ac_envvar in #(
-      '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
-    esac
-    eval $ac_envvar=\$ac_optarg
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
-  case $enable_option_checking in
-    no) ;;
-    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
-    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
-  esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
-		datadir sysconfdir sharedstatedir localstatedir includedir \
-		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-		libdir localedir mandir
-do
-  eval ac_val=\$$ac_var
-  # Remove trailing slashes.
-  case $ac_val in
-    */ )
-      ac_val=`expr "X$ac_val" : 'X$.*[^/]$' \| "X$ac_val" : 'X$.*$'`
-      eval $ac_var=\$ac_val;;
-  esac
-  # Be sure to have absolute directory names.
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* )  continue;;
-    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-  esac
-  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
-	 X"$as_myself" : 'X$//$[^/]' \| \
-	 X"$as_myself" : 'X$//$$' \| \
-	 X"$as_myself" : 'X$/$' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
-    sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/\/$[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/\/$$/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/$.*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r "$srcdir/$ac_unique_file"; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
-  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
-	pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
-  srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X$.*[^/]$' \| "X$srcdir" : 'X$.*$'`;;
-esac
-for ac_var in $ac_precious_vars; do
-  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_env_${ac_var}_value=\$${ac_var}
-  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures pykolab 0.7 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking ...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR            user executables [EPREFIX/bin]
-  --sbindir=DIR           system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR        program executables [EPREFIX/libexec]
-  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
-  --libdir=DIR            object code libraries [EPREFIX/lib]
-  --includedir=DIR        C header files [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
-  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR           info documentation [DATAROOTDIR/info]
-  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR            man documentation [DATAROOTDIR/man]
-  --docdir=DIR            documentation root [DATAROOTDIR/doc/pykolab]
-  --htmldir=DIR           html documentation [DOCDIR]
-  --dvidir=DIR            dvi documentation [DOCDIR]
-  --pdfdir=DIR            pdf documentation [DOCDIR]
-  --psdir=DIR             ps documentation [DOCDIR]
-_ACEOF
-
-  cat <<\_ACEOF
-
-Program names:
-  --program-prefix=PREFIX            prepend PREFIX to installed program names
-  --program-suffix=SUFFIX            append SUFFIX to installed program names
-  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-  case $ac_init_help in
-     short | recursive ) echo "Configuration of pykolab 0.7:";;
-   esac
-  cat <<\_ACEOF
-
-Optional Features:
-  --disable-option-checking  ignore unrecognized --enable/--with options
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --enable-silent-rules   less verbose build output (undo: "make V=1")
-  --disable-silent-rules  verbose build output (undo: "make V=0")
-  --enable-maintainer-mode
-                          enable make rules and dependencies not useful (and
-                          sometimes confusing) to the casual installer
-  --enable-dependency-tracking
-                          do not reject slow dependency extractors
-  --disable-dependency-tracking
-                          speeds up one-time build
-  --disable-nls           do not use Native Language Support
-  --enable-enterprise     Turn on entitlements, compile binary blob
-
-Some influential environment variables:
-  PYTHON      the Python interpreter
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  LIBS        libraries to pass to the linker, e.g. -l<library>
-  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
-              you have headers in a nonstandard directory <include dir>
-  CPP         C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to the package provider.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" ||
-      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
-      continue
-    ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-    cd "$ac_dir" || { ac_status=$?; continue; }
-    # Check for guested configure.
-    if test -f "$ac_srcdir/configure.gnu"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-    elif test -f "$ac_srcdir/configure"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure" --help=recursive
-    else
-      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi || ac_status=$?
-    cd "$ac_pwd" || { ac_status=$?; break; }
-  done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
-  cat <<\_ACEOF
-pykolab configure 0.7
-generated by GNU Autoconf 2.69
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext
-  if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } > conftest.i && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-    ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_cpp
-
-# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists, giving a warning if it cannot be compiled using
-# the include files in INCLUDES and setting the cache variable VAR
-# accordingly.
-ac_fn_c_check_header_mongrel ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if eval \${$3+:} false; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
-  $as_echo_n "(cached) " >&6
-fi
-eval ac_res=\$$3
-	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
-$as_echo_n "checking $2 usability... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_header_compiler=yes
-else
-  ac_header_compiler=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
-$as_echo_n "checking $2 presence... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <$2>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  ac_header_preproc=yes
-else
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
-  yes:no: )
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-    ;;
-esac
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  eval "$3=\$ac_header_compiler"
-fi
-eval ac_res=\$$3
-	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_header_mongrel
-
-# ac_fn_c_try_run LINENO
-# ----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
-# that executables *can* be run.
-ac_fn_c_try_run ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-       $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-       ac_retval=$ac_status
-fi
-  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_run
-
-# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists and can be compiled using the include files in
-# INCLUDES, setting the cache variable VAR accordingly.
-ac_fn_c_check_header_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  eval "$3=yes"
-else
-  eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
-	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_header_compile
-
-# ac_fn_c_try_link LINENO
-# -----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_link ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext conftest$ac_exeext
-  if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 test -x conftest$ac_exeext
-       }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_retval=1
-fi
-  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
-  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
-  # interfere with the next link command; also delete a directory that is
-  # left behind by Apple's compiler.  We do this before executing the actions.
-  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_link
-
-# ac_fn_c_check_func LINENO FUNC VAR
-# ----------------------------------
-# Tests whether FUNC exists, setting the cache variable VAR accordingly
-ac_fn_c_check_func ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $2 innocuous_$2
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $2 (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $2
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $2 ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$2 || defined __stub___$2
-choke me
-#endif
-
-int
-main ()
-{
-return $2 ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  eval "$3=yes"
-else
-  eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-fi
-eval ac_res=\$$3
-	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_func
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by pykolab $as_me 0.7, which was
-generated by GNU Autoconf 2.69.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    $as_echo "PATH: $as_dir"
-  done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *\'*)
-      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
-    2)
-      as_fn_append ac_configure_args1 " '$ac_arg'"
-      if test $ac_must_keep_next = true; then
-	ac_must_keep_next=false # Got value, back to normal.
-      else
-	case $ac_arg in
-	  *=* | --config-cache | -C | -disable-* | --disable-* \
-	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-	  | -with-* | --with-* | -without-* | --without-* | --x)
-	    case "$ac_configure_args0 " in
-	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-	    esac
-	    ;;
-	  -* ) ac_must_keep_next=true ;;
-	esac
-      fi
-      as_fn_append ac_configure_args " '$ac_arg'"
-      ;;
-    esac
-  done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^$[a-zA-Z_][a-zA-Z0-9_]*$=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-  (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      sed -n \
-	"s/'\''/'\''\\\\'\'''\''/g;
-	  s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='\''\\2'\''/p"
-      ;; #(
-    *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-)
-    echo
-
-    $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      $as_echo "$ac_var='\''$ac_val'\''"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
-      echo
-      for ac_var in $ac_subst_files
-      do
-	eval ac_val=\$$ac_var
-	case $ac_val in
-	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-	esac
-	$as_echo "$ac_var='\''$ac_val'\''"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
-      echo
-      cat confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      $as_echo "$as_me: caught signal $ac_signal"
-    $as_echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
-  # We do not want a PATH search for config.site.
-  case $CONFIG_SITE in #((
-    -*)  ac_site_file1=./$CONFIG_SITE;;
-    */*) ac_site_file1=$CONFIG_SITE;;
-    *)   ac_site_file1=./$CONFIG_SITE;;
-  esac
-elif test "x$prefix" != xNONE; then
-  ac_site_file1=$prefix/share/config.site
-  ac_site_file2=$prefix/etc/config.site
-else
-  ac_site_file1=$ac_default_prefix/share/config.site
-  ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
-  test "x$ac_site_file" = xNONE && continue
-  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file" \
-      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special files
-  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
-  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-      *)                      . "./$cache_file";;
-    esac
-  fi
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-	# differences in whitespace do not lead to failure.
-	ac_old_val_w=`echo x $ac_old_val`
-	ac_new_val_w=`echo x $ac_new_val`
-	if test "$ac_old_val_w" != "$ac_new_val_w"; then
-	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	  ac_cache_corrupted=:
-	else
-	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-	  eval $ac_var=\$ac_old_val
-	fi
-	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
-$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
-	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
-$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-RELEASE=0.1
-
-
-
-
-ALL_LINGUAS="ach af af_ZA ak de de_DE es fr nl"
-
-am__api_version='1.13'
-
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-  if test -f "$ac_dir/install-sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f "$ac_dir/install.sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f "$ac_dir/shtool"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
-  ./ | .// | /[cC]/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-	  if test $ac_prog = install &&
-	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
-	  else
-	    rm -rf conftest.one conftest.two conftest.dir
-	    echo one > conftest.one
-	    echo two > conftest.two
-	    mkdir conftest.dir
-	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-	      test -s conftest.one && test -s conftest.two &&
-	      test -s conftest.dir/conftest.one &&
-	      test -s conftest.dir/conftest.two
-	    then
-	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	      break 3
-	    fi
-	  fi
-	fi
-      done
-    done
-    ;;
-esac
-
-  done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    INSTALL=$ac_install_sh
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
-$as_echo_n "checking whether build environment is sane... " >&6; }
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name.  Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
-  *[\\\"\#\$\&\'\`$am_lf]*)
-    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
-esac
-case $srcdir in
-  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
-    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   am_has_slept=no
-   for am_try in 1 2; do
-     echo "timestamp, slept: $am_has_slept" > conftest.file
-     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-     if test "$*" = "X"; then
-	# -L didn't work.
-	set X `ls -t "$srcdir/configure" conftest.file`
-     fi
-     if test "$*" != "X $srcdir/configure conftest.file" \
-	&& test "$*" != "X conftest.file $srcdir/configure"; then
-
-	# If neither matched, then we have a broken ls.  This can happen
-	# if, for instance, CONFIG_SHELL is bash and it inherits a
-	# broken ls alias from the environment.  This has actually
-	# happened.  Such a system could not be considered "sane".
-	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
-  alias in your environment" "$LINENO" 5
-     fi
-     if test "$2" = conftest.file || test $am_try -eq 2; then
-       break
-     fi
-     # Just in case.
-     sleep 1
-     am_has_slept=yes
-   done
-   test "$2" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   as_fn_error $? "newly created file is older than distributed files!
-Check your system clock" "$LINENO" 5
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
-  ( sleep 1 ) &
-  am_sleep_pid=$!
-fi
-
-rm -f conftest.file
-
-test "$program_prefix" != NONE &&
-  program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.
-# By default was `s,x,x', remove it if useless.
-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-if test x"${MISSING+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-  *)
-    MISSING="\${SHELL} $am_aux_dir/missing" ;;
-  esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --is-lightweight"; then
-  am_missing_run="$MISSING "
-else
-  am_missing_run=
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
-fi
-
-if test x"${install_sh}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-  *)
-    install_sh="\${SHELL} $am_aux_dir/install-sh"
-  esac
-fi
-
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip".  However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
-if test -z "$MKDIR_P"; then
-  if ${ac_cv_path_mkdir+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in mkdir gmkdir; do
-	 for ac_exec_ext in '' $ac_executable_extensions; do
-	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
-	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
-	     'mkdir (GNU coreutils) '* | \
-	     'mkdir (coreutils) '* | \
-	     'mkdir (fileutils) '4.1*)
-	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
-	       break 3;;
-	   esac
-	 done
-       done
-  done
-IFS=$as_save_IFS
-
-fi
-
-  test -d ./--version && rmdir ./--version
-  if test "${ac_cv_path_mkdir+set}" = set; then
-    MKDIR_P="$ac_cv_path_mkdir -p"
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for MKDIR_P within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    MKDIR_P="$ac_install_sh -d"
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
-$as_echo "$MKDIR_P" >&6; }
-
-for ac_prog in gawk mawk nawk awk
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AWK+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AWK"; then
-  ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_AWK="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$AWK" && break
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
-	@echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
-  *@@@%%%=?*=@@@%%%*)
-    eval ac_cv_prog_make_${ac_make}_set=yes;;
-  *)
-    eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-  SET_MAKE=
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-# Check whether --enable-silent-rules was given.
-if test "${enable_silent_rules+set}" = set; then :
-  enableval=$enable_silent_rules;
-fi
-
-case $enable_silent_rules in # (((
-  yes) AM_DEFAULT_VERBOSITY=0;;
-   no) AM_DEFAULT_VERBOSITY=1;;
-    *) AM_DEFAULT_VERBOSITY=1;;
-esac
-am_make=${MAKE-make}
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
-$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
-if ${am_cv_make_support_nested_variables+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if $as_echo 'TRUE=$(BAR$(V))
-BAR0=false
-BAR1=true
-V=1
-am__doit:
-	@$(TRUE)
-.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
-  am_cv_make_support_nested_variables=yes
-else
-  am_cv_make_support_nested_variables=no
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
-$as_echo "$am_cv_make_support_nested_variables" >&6; }
-if test $am_cv_make_support_nested_variables = yes; then
-    AM_V='$(V)'
-  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
-else
-  AM_V=$AM_DEFAULT_VERBOSITY
-  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
-fi
-AM_BACKSLASH='\'
-
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  am__isrc=' -I$(srcdir)'
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE='pykolab'
- VERSION='0.7'
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-# For better backward compatibility.  To be removed once Automake 1.9.x
-# dies out for good.  For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-mkdir_p='$(MKDIR_P)'
-
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility.  Yes, it's still used
-# in the wild :-(  We should find a proper way to deprecate it ...
-AMTAR='$${TAR-tar}'
-
-
-# We'll loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar  pax cpio none'
-
-am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
-$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
-    # Check whether --enable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then :
-  enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
-$as_echo "$USE_MAINTAINER_MODE" >&6; }
-   if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-
-  MAINT=$MAINTAINER_MODE_TRUE
-
-
-
-
-
-
-
-
-        # Find any Python interpreter.
-    if test -z "$PYTHON"; then
-      for ac_prog in python python2 python3 python3.3 python3.2 python3.1 python3.0 python2.7  python2.6 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PYTHON+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $PYTHON in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PYTHON="$PYTHON" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PYTHON="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-PYTHON=$ac_cv_path_PYTHON
-if test -n "$PYTHON"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PYTHON" >&5
-$as_echo "$PYTHON" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$PYTHON" && break
-done
-test -n "$PYTHON" || PYTHON=":"
-
-    fi
-    am_display_PYTHON=python
-
-
-  if test "$PYTHON" = :; then
-      as_fn_error $? "no suitable Python interpreter found" "$LINENO" 5
-  else
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $am_display_PYTHON version" >&5
-$as_echo_n "checking for $am_display_PYTHON version... " >&6; }
-if ${am_cv_python_version+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[:3])"`
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_python_version" >&5
-$as_echo "$am_cv_python_version" >&6; }
-  PYTHON_VERSION=$am_cv_python_version
-
-
-
-  PYTHON_PREFIX='${prefix}'
-
-  PYTHON_EXEC_PREFIX='${exec_prefix}'
-
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $am_display_PYTHON platform" >&5
-$as_echo_n "checking for $am_display_PYTHON platform... " >&6; }
-if ${am_cv_python_platform+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"`
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_python_platform" >&5
-$as_echo "$am_cv_python_platform" >&6; }
-  PYTHON_PLATFORM=$am_cv_python_platform
-
-
-  # Just factor out some code duplication.
-  am_python_setup_sysconfig="\
-import sys
-# Prefer sysconfig over distutils.sysconfig, for better compatibility
-# with python 3.x.  See automake bug#10227.
-try:
-    import sysconfig
-except ImportError:
-    can_use_sysconfig = 0
-else:
-    can_use_sysconfig = 1
-# Can't use sysconfig in CPython 2.7, since it's broken in virtualenvs:
-# <https://github.com/pypa/virtualenv/issues/118>
-try:
-    from platform import python_implementation
-    if python_implementation() == 'CPython' and sys.version[:3] == '2.7':
-        can_use_sysconfig = 0
-except ImportError:
-    pass"
-
-
-            { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $am_display_PYTHON script directory" >&5
-$as_echo_n "checking for $am_display_PYTHON script directory... " >&6; }
-if ${am_cv_python_pythondir+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$prefix" = xNONE
-     then
-       am_py_prefix=$ac_default_prefix
-     else
-       am_py_prefix=$prefix
-     fi
-     am_cv_python_pythondir=`$PYTHON -c "
-$am_python_setup_sysconfig
-if can_use_sysconfig:
-    sitedir = sysconfig.get_path('purelib', vars={'base':'$am_py_prefix'})
-else:
-    from distutils import sysconfig
-    sitedir = sysconfig.get_python_lib(0, 0, prefix='$am_py_prefix')
-sys.stdout.write(sitedir)"`
-     case $am_cv_python_pythondir in
-     $am_py_prefix*)
-       am__strip_prefix=`echo "$am_py_prefix" | sed 's|.|.|g'`
-       am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix,$PYTHON_PREFIX,"`
-       ;;
-     *)
-       case $am_py_prefix in
-         /usr|/System*) ;;
-         *)
-	  am_cv_python_pythondir=$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages
-	  ;;
-       esac
-       ;;
-     esac
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_python_pythondir" >&5
-$as_echo "$am_cv_python_pythondir" >&6; }
-  pythondir=$am_cv_python_pythondir
-
-
-
-  pkgpythondir=\${pythondir}/$PACKAGE
-
-
-        { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $am_display_PYTHON extension module directory" >&5
-$as_echo_n "checking for $am_display_PYTHON extension module directory... " >&6; }
-if ${am_cv_python_pyexecdir+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$exec_prefix" = xNONE
-     then
-       am_py_exec_prefix=$am_py_prefix
-     else
-       am_py_exec_prefix=$exec_prefix
-     fi
-     am_cv_python_pyexecdir=`$PYTHON -c "
-$am_python_setup_sysconfig
-if can_use_sysconfig:
-    sitedir = sysconfig.get_path('platlib', vars={'platbase':'$am_py_prefix'})
-else:
-    from distutils import sysconfig
-    sitedir = sysconfig.get_python_lib(1, 0, prefix='$am_py_prefix')
-sys.stdout.write(sitedir)"`
-     case $am_cv_python_pyexecdir in
-     $am_py_exec_prefix*)
-       am__strip_prefix=`echo "$am_py_exec_prefix" | sed 's|.|.|g'`
-       am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix,$PYTHON_EXEC_PREFIX,"`
-       ;;
-     *)
-       case $am_py_exec_prefix in
-         /usr|/System*) ;;
-         *)
-	   am_cv_python_pyexecdir=$PYTHON_EXEC_PREFIX/lib/python$PYTHON_VERSION/site-packages
-	   ;;
-       esac
-       ;;
-     esac
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_python_pyexecdir" >&5
-$as_echo "$am_cv_python_pyexecdir" >&6; }
-  pyexecdir=$am_cv_python_pyexecdir
-
-
-
-  pkgpyexecdir=\${pyexecdir}/$PACKAGE
-
-
-
-  fi
-
-
-
-GETTEXT_PACKAGE=pykolab
-
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then :
-  enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-  am__nodep='_no'
-fi
- if test "x$enable_dependency_tracking" != xno; then
-  AMDEP_TRUE=
-  AMDEP_FALSE='#'
-else
-  AMDEP_TRUE='#'
-  AMDEP_FALSE=
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-          if test -n "$ac_tool_prefix"; then
-    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  fi
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl.exe
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl.exe
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CC" && break
-done
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-  esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link_default") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile.  We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
-	;;
-    [ab].out )
-	# We found the default executable, but exeext='' is most
-	# certainly right.
-	break;;
-    *.* )
-	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-	then :; else
-	   ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'`
-	fi
-	# We set ac_cv_exeext here because the later test for it is not
-	# safe: cross compilers may not add the suffix if given an `-o'
-	# argument, so we may need to know it at that point already.
-	# Even if this section looks crufty: it has the advantage of
-	# actually working.
-	break;;
-    * )
-	break;;
-  esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
-  ac_file=''
-fi
-if test -z "$ac_file"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'`
-	  break;;
-    * ) break;;
-  esac
-done
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdio.h>
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
-  { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-  if { ac_try='./conftest$ac_cv_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
-	cross_compiling=yes
-    else
-	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
-    fi
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  for ac_file in conftest.o conftest.obj conftest.*; do
-  test -f "$ac_file" || continue;
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.$.*$'`
-       break;;
-  esac
-done
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_c_werror_flag=$ac_c_werror_flag
-   ac_c_werror_flag=yes
-   ac_cv_prog_cc_g=no
-   CFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-else
-  CFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
-  ac_c_werror_flag=$ac_save_c_werror_flag
-	 CFLAGS="-g"
-	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-   inside strings and character constants.  */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
-  x)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
-  xno)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
-  *)
-    CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC"   am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named 'D' -- because '-MD' means "put the output
-  # in D".
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_CC_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*$[a-zA-Z0-9]*$)$/\1/p' < ./depcomp`
-  fi
-  am__universal=false
-  case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
-      # Solaris 10 /bin/sh.
-      echo '/* dummy */' > sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with '-c' and '-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle '-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs.
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # After this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested.
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok '-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_CC_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-  am__fastdepCC_TRUE=
-  am__fastdepCC_FALSE='#'
-else
-  am__fastdepCC_TRUE='#'
-  am__fastdepCC_FALSE=
-fi
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if ${ac_cv_prog_CPP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if ${ac_cv_path_GREP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$GREP"; then
-  ac_path_GREP_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in grep ggrep; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-      as_fn_executable_p "$ac_path_GREP" || continue
-# Check for GNU ac_path_GREP and select it if it is found.
-  # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo 'GREP' >> "conftest.nl"
-    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    as_fn_arith $ac_count + 1 && ac_count=$as_val
-    if test $ac_count -gt ${ac_path_GREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_GREP="$ac_path_GREP"
-      ac_path_GREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-      $ac_path_GREP_found && break 3
-    done
-  done
-  done
-IFS=$as_save_IFS
-  if test -z "$ac_cv_path_GREP"; then
-    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-  fi
-else
-  ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if ${ac_cv_path_EGREP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-   then ac_cv_path_EGREP="$GREP -E"
-   else
-     if test -z "$EGREP"; then
-  ac_path_EGREP_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in egrep; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-      as_fn_executable_p "$ac_path_EGREP" || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
-  # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo 'EGREP' >> "conftest.nl"
-    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    as_fn_arith $ac_count + 1 && ac_count=$as_val
-    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_EGREP="$ac_path_EGREP"
-      ac_path_EGREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-      $ac_path_EGREP_found && break 3
-    done
-  done
-  done
-IFS=$as_save_IFS
-  if test -z "$ac_cv_path_EGREP"; then
-    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-  fi
-else
-  ac_cv_path_EGREP=$EGREP
-fi
-
-   fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if ${ac_cv_header_stdc+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_header_stdc=yes
-else
-  ac_cv_header_stdc=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then :
-  :
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
-		   (('a' <= (c) && (c) <= 'i') \
-		     || ('j' <= (c) && (c) <= 'r') \
-		     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-	|| toupper (i) != TOUPPER (i))
-      return 2;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-		  inttypes.h stdint.h unistd.h
-do :
-  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
-"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-   for ac_header in locale.h
-do :
-  ac_fn_c_check_header_mongrel "$LINENO" "locale.h" "ac_cv_header_locale_h" "$ac_includes_default"
-if test "x$ac_cv_header_locale_h" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LOCALE_H 1
-_ACEOF
-
-fi
-
-done
-
-    if test $ac_cv_header_locale_h = yes; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LC_MESSAGES" >&5
-$as_echo_n "checking for LC_MESSAGES... " >&6; }
-if ${am_cv_val_LC_MESSAGES+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <locale.h>
-int
-main ()
-{
-return LC_MESSAGES
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  am_cv_val_LC_MESSAGES=yes
-else
-  am_cv_val_LC_MESSAGES=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_val_LC_MESSAGES" >&5
-$as_echo "$am_cv_val_LC_MESSAGES" >&6; }
-    if test $am_cv_val_LC_MESSAGES = yes; then
-
-$as_echo "#define HAVE_LC_MESSAGES 1" >>confdefs.h
-
-    fi
-  fi
-     USE_NLS=yes
-
-
-    gt_cv_have_gettext=no
-
-    CATOBJEXT=NONE
-    XGETTEXT=:
-    INTLLIBS=
-
-    ac_fn_c_check_header_mongrel "$LINENO" "libintl.h" "ac_cv_header_libintl_h" "$ac_includes_default"
-if test "x$ac_cv_header_libintl_h" = xyes; then :
-  gt_cv_func_dgettext_libintl="no"
-      libintl_extra_libs=""
-
-      #
-      # First check in libc
-      #
-      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in libc" >&5
-$as_echo_n "checking for ngettext in libc... " >&6; }
-if ${gt_cv_func_ngettext_libc+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <libintl.h>
-
-int
-main ()
-{
-return !ngettext ("","", 1)
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  gt_cv_func_ngettext_libc=yes
-else
-  gt_cv_func_ngettext_libc=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_ngettext_libc" >&5
-$as_echo "$gt_cv_func_ngettext_libc" >&6; }
-
-      if test "$gt_cv_func_ngettext_libc" = "yes" ; then
-	      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgettext in libc" >&5
-$as_echo_n "checking for dgettext in libc... " >&6; }
-if ${gt_cv_func_dgettext_libc+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <libintl.h>
-
-int
-main ()
-{
-return !dgettext ("","")
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  gt_cv_func_dgettext_libc=yes
-else
-  gt_cv_func_dgettext_libc=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_dgettext_libc" >&5
-$as_echo "$gt_cv_func_dgettext_libc" >&6; }
-      fi
-
-      if test "$gt_cv_func_ngettext_libc" = "yes" ; then
-        for ac_func in bind_textdomain_codeset
-do :
-  ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset"
-if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_BIND_TEXTDOMAIN_CODESET 1
-_ACEOF
-
-fi
-done
-
-      fi
-
-      #
-      # If we don't have everything we want, check in libintl
-      #
-      if test "$gt_cv_func_dgettext_libc" != "yes" \
-	 || test "$gt_cv_func_ngettext_libc" != "yes" \
-         || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then
-
-        { $as_echo "$as_me:${as_lineno-$LINENO}: checking for bindtextdomain in -lintl" >&5
-$as_echo_n "checking for bindtextdomain in -lintl... " >&6; }
-if ${ac_cv_lib_intl_bindtextdomain+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lintl  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char bindtextdomain ();
-int
-main ()
-{
-return bindtextdomain ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_intl_bindtextdomain=yes
-else
-  ac_cv_lib_intl_bindtextdomain=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_bindtextdomain" >&5
-$as_echo "$ac_cv_lib_intl_bindtextdomain" >&6; }
-if test "x$ac_cv_lib_intl_bindtextdomain" = xyes; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in -lintl" >&5
-$as_echo_n "checking for ngettext in -lintl... " >&6; }
-if ${ac_cv_lib_intl_ngettext+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lintl  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char ngettext ();
-int
-main ()
-{
-return ngettext ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_intl_ngettext=yes
-else
-  ac_cv_lib_intl_ngettext=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_ngettext" >&5
-$as_echo "$ac_cv_lib_intl_ngettext" >&6; }
-if test "x$ac_cv_lib_intl_ngettext" = xyes; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgettext in -lintl" >&5
-$as_echo_n "checking for dgettext in -lintl... " >&6; }
-if ${ac_cv_lib_intl_dgettext+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lintl  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dgettext ();
-int
-main ()
-{
-return dgettext ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_intl_dgettext=yes
-else
-  ac_cv_lib_intl_dgettext=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_dgettext" >&5
-$as_echo "$ac_cv_lib_intl_dgettext" >&6; }
-if test "x$ac_cv_lib_intl_dgettext" = xyes; then :
-  gt_cv_func_dgettext_libintl=yes
-fi
-
-fi
-
-fi
-
-
-	if test "$gt_cv_func_dgettext_libintl" != "yes" ; then
-	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if -liconv is needed to use gettext" >&5
-$as_echo_n "checking if -liconv is needed to use gettext... " >&6; }
-	  { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5
-$as_echo "" >&6; }
-  	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in -lintl" >&5
-$as_echo_n "checking for ngettext in -lintl... " >&6; }
-if ${ac_cv_lib_intl_ngettext+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lintl -liconv $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char ngettext ();
-int
-main ()
-{
-return ngettext ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_intl_ngettext=yes
-else
-  ac_cv_lib_intl_ngettext=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_ngettext" >&5
-$as_echo "$ac_cv_lib_intl_ngettext" >&6; }
-if test "x$ac_cv_lib_intl_ngettext" = xyes; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dcgettext in -lintl" >&5
-$as_echo_n "checking for dcgettext in -lintl... " >&6; }
-if ${ac_cv_lib_intl_dcgettext+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lintl -liconv $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dcgettext ();
-int
-main ()
-{
-return dcgettext ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_intl_dcgettext=yes
-else
-  ac_cv_lib_intl_dcgettext=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_dcgettext" >&5
-$as_echo "$ac_cv_lib_intl_dcgettext" >&6; }
-if test "x$ac_cv_lib_intl_dcgettext" = xyes; then :
-  gt_cv_func_dgettext_libintl=yes
-			libintl_extra_libs=-liconv
-else
-  :
-fi
-
-else
-  :
-fi
-
-        fi
-
-        #
-        # If we found libintl, then check in it for bind_textdomain_codeset();
-        # we'll prefer libc if neither have bind_textdomain_codeset(),
-        # and both have dgettext and ngettext
-        #
-        if test "$gt_cv_func_dgettext_libintl" = "yes" ; then
-          glib_save_LIBS="$LIBS"
-          LIBS="$LIBS -lintl $libintl_extra_libs"
-          unset ac_cv_func_bind_textdomain_codeset
-          for ac_func in bind_textdomain_codeset
-do :
-  ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset"
-if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_BIND_TEXTDOMAIN_CODESET 1
-_ACEOF
-
-fi
-done
-
-          LIBS="$glib_save_LIBS"
-
-          if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then
-            gt_cv_func_dgettext_libc=no
-          else
-            if test "$gt_cv_func_dgettext_libc" = "yes" \
-		&& test "$gt_cv_func_ngettext_libc" = "yes"; then
-              gt_cv_func_dgettext_libintl=no
-            fi
-          fi
-        fi
-      fi
-
-      if test "$gt_cv_func_dgettext_libc" = "yes" \
-	|| test "$gt_cv_func_dgettext_libintl" = "yes"; then
-        gt_cv_have_gettext=yes
-      fi
-
-      if test "$gt_cv_func_dgettext_libintl" = "yes"; then
-        INTLLIBS="-lintl $libintl_extra_libs"
-      fi
-
-      if test "$gt_cv_have_gettext" = "yes"; then
-
-$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h
-
-	# Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MSGFMT+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case "$MSGFMT" in
-  /*)
-  ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
-	ac_cv_path_MSGFMT="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
-  ;;
-esac
-fi
-MSGFMT="$ac_cv_path_MSGFMT"
-if test "$MSGFMT" != "no"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
-$as_echo "$MSGFMT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-	if test "$MSGFMT" != "no"; then
-          glib_save_LIBS="$LIBS"
-          LIBS="$LIBS $INTLLIBS"
-	  for ac_func in dcgettext
-do :
-  ac_fn_c_check_func "$LINENO" "dcgettext" "ac_cv_func_dcgettext"
-if test "x$ac_cv_func_dcgettext" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_DCGETTEXT 1
-_ACEOF
-
-fi
-done
-
-	  MSGFMT_OPTS=
-	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if msgfmt accepts -c" >&5
-$as_echo_n "checking if msgfmt accepts -c... " >&6; }
-	  cat >conftest.foo <<_ACEOF
-
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: test 1.0\n"
-"PO-Revision-Date: 2007-02-15 12:01+0100\n"
-"Last-Translator: test <foo@bar.xx>\n"
-"Language-Team: C <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-_ACEOF
-if { { $as_echo "$as_me:${as_lineno-$LINENO}: \$MSGFMT -c -o /dev/null conftest.foo"; } >&5
-  ($MSGFMT -c -o /dev/null conftest.foo) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  MSGFMT_OPTS=-c; { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-echo "$as_me: failed input was:" >&5
-sed 's/^/| /' conftest.foo >&5
-fi
-
-	  # Extract the first word of "gmsgfmt", so it can be a program name with args.
-set dummy gmsgfmt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GMSGFMT+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $GMSGFMT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
-  ;;
-esac
-fi
-GMSGFMT=$ac_cv_path_GMSGFMT
-if test -n "$GMSGFMT"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
-$as_echo "$GMSGFMT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-	  # Extract the first word of "xgettext", so it can be a program name with args.
-set dummy xgettext; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XGETTEXT+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case "$XGETTEXT" in
-  /*)
-  ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
-	ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
-  ;;
-esac
-fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
-if test "$XGETTEXT" != ":"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
-$as_echo "$XGETTEXT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-	  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-extern int _nl_msg_cat_cntr;
-			 return _nl_msg_cat_cntr
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  CATOBJEXT=.gmo
-             DATADIRNAME=share
-else
-  case $host in
-	    *-*-solaris*)
-	    	                	    	                ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset"
-if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then :
-  CATOBJEXT=.gmo
-               DATADIRNAME=share
-else
-  CATOBJEXT=.mo
-               DATADIRNAME=lib
-fi
-
-	    ;;
-	    *-*-openbsd*)
-	    CATOBJEXT=.mo
-            DATADIRNAME=share
-	    ;;
-	    *)
-	    CATOBJEXT=.mo
-            DATADIRNAME=lib
-	    ;;
-	    esac
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-          LIBS="$glib_save_LIBS"
-	  INSTOBJEXT=.mo
-	else
-	  gt_cv_have_gettext=no
-	fi
-      fi
-
-fi
-
-
-
-    if test "$gt_cv_have_gettext" = "yes" ; then
-
-$as_echo "#define ENABLE_NLS 1" >>confdefs.h
-
-    fi
-
-        if test "$XGETTEXT" != ":"; then
-                  if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
-        : ;
-      else
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: found xgettext program is not GNU xgettext; ignore it" >&5
-$as_echo "found xgettext program is not GNU xgettext; ignore it" >&6; }
-        XGETTEXT=":"
-      fi
-    fi
-
-    # We need to process the po/ directory.
-    POSUB=po
-
-    ac_config_commands="$ac_config_commands default-1"
-
-
-                for lang in $ALL_LINGUAS; do
-      GMOFILES="$GMOFILES $lang.gmo"
-      POFILES="$POFILES $lang.po"
-    done
-
-
-
-
-
-
-
-
-
-
-
-
-
-   if test "$gt_cv_have_gettext" = "yes"; then
-     if test "x$ALL_LINGUAS" = "x"; then
-       LINGUAS=
-     else
-       { $as_echo "$as_me:${as_lineno-$LINENO}: checking for catalogs to be installed" >&5
-$as_echo_n "checking for catalogs to be installed... " >&6; }
-       NEW_LINGUAS=
-       for presentlang in $ALL_LINGUAS; do
-         useit=no
-         if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then
-           desiredlanguages="$LINGUAS"
-         else
-           desiredlanguages="$ALL_LINGUAS"
-         fi
-         for desiredlang in $desiredlanguages; do
- 	   # Use the presentlang catalog if desiredlang is
-           #   a. equal to presentlang, or
-           #   b. a variant of presentlang (because in this case,
-           #      presentlang can be used as a fallback for messages
-           #      which are not translated in the desiredlang catalog).
-           case "$desiredlang" in
-             "$presentlang"*) useit=yes;;
-           esac
-         done
-         if test $useit = yes; then
-           NEW_LINGUAS="$NEW_LINGUAS $presentlang"
-         fi
-       done
-       LINGUAS=$NEW_LINGUAS
-       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LINGUAS" >&5
-$as_echo "$LINGUAS" >&6; }
-     fi
-
-          if test -n "$LINGUAS"; then
-       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
-     fi
-   fi
-
-            MKINSTALLDIRS=
-   if test -n "$ac_aux_dir"; then
-     MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
-   fi
-   if test -z "$MKINSTALLDIRS"; then
-     MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
-   fi
-
-
-         test -d po || mkdir po
-   if test "x$srcdir" != "x."; then
-     if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
-       posrcprefix="$srcdir/"
-     else
-       posrcprefix="../$srcdir/"
-     fi
-   else
-     posrcprefix="../"
-   fi
-   rm -f po/POTFILES
-   sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/$.*$ \\\\/\1/" \
-	< $srcdir/po/POTFILES.in > po/POTFILES
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
-$as_echo_n "checking whether NLS is requested... " >&6; }
-    # Check whether --enable-nls was given.
-if test "${enable_nls+set}" = set; then :
-  enableval=$enable_nls; USE_NLS=$enableval
-else
-  USE_NLS=yes
-fi
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
-$as_echo "$USE_NLS" >&6; }
-
-
-
-
-case "$am__api_version" in
-    1.01234)
-	as_fn_error $? "Automake 1.5 or newer is required to use intltool" "$LINENO" 5
-    ;;
-    *)
-    ;;
-esac
-
-INTLTOOL_REQUIRED_VERSION_AS_INT=`echo  | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
-INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3`
-INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
-if test -n ""; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= " >&5
-$as_echo_n "checking for intltool >= ... " >&6; }
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5
-$as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; }
-    test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" ||
-	as_fn_error $? "Your intltool is too old.  You need intltool  or later." "$LINENO" 5
-fi
-
-# Extract the first word of "intltool-update", so it can be a program name with args.
-set dummy intltool-update; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_INTLTOOL_UPDATE+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $INTLTOOL_UPDATE in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE
-if test -n "$INTLTOOL_UPDATE"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5
-$as_echo "$INTLTOOL_UPDATE" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-# Extract the first word of "intltool-merge", so it can be a program name with args.
-set dummy intltool-merge; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_INTLTOOL_MERGE+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $INTLTOOL_MERGE in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE
-if test -n "$INTLTOOL_MERGE"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5
-$as_echo "$INTLTOOL_MERGE" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-# Extract the first word of "intltool-extract", so it can be a program name with args.
-set dummy intltool-extract; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_INTLTOOL_EXTRACT+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $INTLTOOL_EXTRACT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT
-if test -n "$INTLTOOL_EXTRACT"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5
-$as_echo "$INTLTOOL_EXTRACT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then
-    as_fn_error $? "The intltool scripts were not found. Please install intltool." "$LINENO" 5
-fi
-
-if test -z "$AM_DEFAULT_VERBOSITY"; then
-  AM_DEFAULT_VERBOSITY=1
-fi
-
-
-INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))'
-INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))'
-INTLTOOL__v_MERGE_0='@echo "  ITMRG " $@;'
-
-
-
-
-INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))'
-intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))'
-intltool__v_merge_options_0='-q'
-
-
-
-
-  INTLTOOL_DESKTOP_RULE='%.desktop:   %.desktop.in   $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-     INTLTOOL_KEYS_RULE='%.keys:      %.keys.in      $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-     INTLTOOL_PROP_RULE='%.prop:      %.prop.in      $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-      INTLTOOL_OAF_RULE='%.oaf:       %.oaf.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< $@'
-     INTLTOOL_PONG_RULE='%.pong:      %.pong.in      $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-   INTLTOOL_SERVER_RULE='%.server:    %.server.in    $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-    INTLTOOL_SHEET_RULE='%.sheet:     %.sheet.in     $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-       INTLTOOL_UI_RULE='%.ui:        %.ui.in        $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-      INTLTOOL_XML_RULE='%.xml:       %.xml.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then
-      INTLTOOL_XML_NOMERGE_RULE='%.xml:       %.xml.in       $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< $@'
-else
-      INTLTOOL_XML_NOMERGE_RULE='%.xml:       %.xml.in       $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.$$RANDOM && mkdir $$_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u $$_it_tmp_dir $< $@ && rmdir $$_it_tmp_dir'
-fi
-      INTLTOOL_XAM_RULE='%.xam:       %.xml.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-      INTLTOOL_KBD_RULE='%.kbd:       %.kbd.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-    INTLTOOL_CAVES_RULE='%.caves:     %.caves.in     $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-  INTLTOOL_SCHEMAS_RULE='%.schemas:   %.schemas.in   $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-    INTLTOOL_THEME_RULE='%.theme:     %.theme.in     $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-    INTLTOOL_SERVICE_RULE='%.service: %.service.in   $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-   INTLTOOL_POLICY_RULE='%.policy:    %.policy.in    $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# Check the gettext tools to make sure they are GNU
-# Extract the first word of "xgettext", so it can be a program name with args.
-set dummy xgettext; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XGETTEXT+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $XGETTEXT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-XGETTEXT=$ac_cv_path_XGETTEXT
-if test -n "$XGETTEXT"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
-$as_echo "$XGETTEXT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-# Extract the first word of "msgmerge", so it can be a program name with args.
-set dummy msgmerge; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MSGMERGE+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $MSGMERGE in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-MSGMERGE=$ac_cv_path_MSGMERGE
-if test -n "$MSGMERGE"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
-$as_echo "$MSGMERGE" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-# Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MSGFMT+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $MSGFMT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-MSGFMT=$ac_cv_path_MSGFMT
-if test -n "$MSGFMT"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
-$as_echo "$MSGFMT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-# Extract the first word of "gmsgfmt", so it can be a program name with args.
-set dummy gmsgfmt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GMSGFMT+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $GMSGFMT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
-  ;;
-esac
-fi
-GMSGFMT=$ac_cv_path_GMSGFMT
-if test -n "$GMSGFMT"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
-$as_echo "$GMSGFMT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then
-    as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5
-fi
-xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`"
-mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`"
-mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`"
-if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then
-    as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5
-fi
-
-# Extract the first word of "perl", so it can be a program name with args.
-set dummy perl; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_INTLTOOL_PERL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $INTLTOOL_PERL in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL
-if test -n "$INTLTOOL_PERL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5
-$as_echo "$INTLTOOL_PERL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-if test -z "$INTLTOOL_PERL"; then
-   as_fn_error $? "perl not found" "$LINENO" 5
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5
-$as_echo_n "checking for perl >= 5.8.1... " >&6; }
-$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1
-if test $? -ne 0; then
-   as_fn_error $? "perl 5.8.1 is required for intltool" "$LINENO" 5
-else
-   IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"`
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5
-$as_echo "$IT_PERL_VERSION" >&6; }
-fi
-if test "x" != "xno-xml"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5
-$as_echo_n "checking for XML::Parser... " >&6; }
-   if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then
-       { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
-   else
-       as_fn_error $? "XML::Parser perl module is required for intltool" "$LINENO" 5
-   fi
-fi
-
-# Substitute ALL_LINGUAS so we can use it in po/Makefile
-
-
-# Set DATADIRNAME correctly if it is not set yet
-# (copied from glib-gettext.m4)
-if test -z "$DATADIRNAME"; then
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-extern int _nl_msg_cat_cntr;
-                       return _nl_msg_cat_cntr
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  DATADIRNAME=share
-else
-  case $host in
-    *-*-solaris*)
-                        ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset"
-if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then :
-  DATADIRNAME=share
-else
-  DATADIRNAME=lib
-fi
-
-    ;;
-    *)
-    DATADIRNAME=lib
-    ;;
-    esac
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-fi
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
-$as_echo_n "checking whether ln -s works... " >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
-$as_echo "no, using $LN_S" >&6; }
-fi
-
-
-# Check whether --enable-enterprise was given.
-if test "${enable_enterprise+set}" = set; then :
-  enableval=$enable_enterprise; case "${enableval}" in
-        yes)    enterprise=true ;;
-        no)     enterprise=false ;;
-        *)      as_fn_error $? "bad value ${enableval} for --enterprise" "$LINENO" 5 ;;
-    esac
-else
-  enterprise=false
-fi
-
-
- if test "${enterprise}" = "true"; then
-  ENTERPRISE_TRUE=
-  ENTERPRISE_FALSE='#'
-else
-  ENTERPRISE_TRUE='#'
-  ENTERPRISE_FALSE=
-fi
-
-
-DATESTAMP=`date +"%a %b %d %Y"`
-
-
-ac_config_files="$ac_config_files bin/rebuild.sh Makefile pykolab.spec conf/Makefile kolabd/Makefile po/Makefile.in pykolab/constants.py pykolab/Makefile saslauthd/Makefile share/Makefile wallace/Makefile"
-
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
-  for ac_var in `(set) 2>&1 | sed -n 's/^$[a-zA-Z_][a-zA-Z0-9_]*$=.*/\1/p'`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-
-  (set) 2>&1 |
-    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      # `set' does not quote correctly, so add quotes: double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \.
-      sed -n \
-	"s/'/'\\\\''/g;
-	  s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='\\2'/p"
-      ;; #(
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-) |
-  sed '
-     /^ac_cv_env_/b end
-     t clear
-     :clear
-     s/^$[^=]*$=$.*[{}].*$$/test "${\1+set}" = set || &/
-     t end
-     s/^$[^=]*$=$.*$$/\1=${\1=\2}/
-     :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-  if test -w "$cache_file"; then
-    if test "x$cache_file" != "x/dev/null"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
-      if test ! -f "$cache_file" || test -h "$cache_file"; then
-	cat confcache >"$cache_file"
-      else
-        case $cache_file in #(
-        */* | ?:*)
-	  mv -f confcache "$cache_file"$$ &&
-	  mv -f "$cache_file"$$ "$cache_file" ;; #(
-        *)
-	  mv -f confcache "$cache_file" ;;
-	esac
-      fi
-    fi
-  else
-    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then branch to the quote section.  Otherwise,
-# look for a macro that doesn't take arguments.
-ac_script='
-:mline
-/\\$/{
- N
- s,\\\n,,
- b mline
-}
-t clear
-:clear
-s/^[	 ]*#[	 ]*define[	 ][	 ]*$[^	 (][^	 (]*([^)]*)$[	 ]*$.*$/-D\1=\2/g
-t quote
-s/^[	 ]*#[	 ]*define[	 ][	 ]*$[^	 ][^	 ]*$[	 ]*$.*$/-D\1=\2/g
-t quote
-b any
-:quote
-s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-s/\[/\\&/g
-s/\]/\\&/g
-s/\$/$$/g
-H
-:any
-${
-	g
-	s/^\n//
-	s/\n/ /g
-	p
-}
-'
-DEFS=`sed -n "$ac_script" confdefs.h`
-
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
-  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-  #    will be set to the directory where LIBOBJS objects are built.
-  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
-$as_echo_n "checking that generated files are newer than configure... " >&6; }
-   if test -n "$am_sleep_pid"; then
-     # Hide warnings about reused PIDs.
-     wait $am_sleep_pid 2>/dev/null
-   fi
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
-$as_echo "done" >&6; }
- if test -n "$EXEEXT"; then
-  am__EXEEXT_TRUE=
-  am__EXEEXT_FALSE='#'
-else
-  am__EXEEXT_TRUE='#'
-  am__EXEEXT_FALSE=
-fi
-
-if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
-  as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  as_fn_error $? "conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-
-  ac_config_commands="$ac_config_commands po/stamp-it"
-
-
-if test -z "${ENTERPRISE_TRUE}" && test -z "${ENTERPRISE_FALSE}"; then
-  as_fn_error $? "conditional \"ENTERPRISE\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\$.*\$"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
-	expr "X$arg" : "X\$.*\$$as_nl";
-	arg=`expr "X$arg" : ".*$as_nl\$.*\$"`;;
-      esac;
-      expr "X$arg" : "X\$.*\$" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" ""	$as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-if expr a : '$a$' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*$...$'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \
-	 X"$0" : 'X$//$$' \| \
-	 X"$0" : 'X$/$' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/$[^/][^/]*$\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/$\/\/$$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/$\/$.*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T='	';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -pR'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -pR'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -pR'
-  fi
-else
-  as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X$//$[^/]' \| \
-	 X"$as_dir" : 'X$//$$' \| \
-	 X"$as_dir" : 'X$/$' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/\/$[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/\/$$/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/$.*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
-  test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by pykolab $as_me 0.7, which was
-generated by GNU Autoconf 2.69.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration.  Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number and configuration settings, then exit
-      --config     print configuration, then exit
-  -q, --quiet, --silent
-                   do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-      --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Configuration commands:
-$config_commands
-
-Report bugs to the package provider."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-pykolab config.status 0.7
-configured by $0, generated by GNU Autoconf 2.69,
-  with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=?*)
-    ac_option=`expr "X$1" : 'X$[^=]*$='`
-    ac_optarg=`expr "X$1" : 'X[^=]*=$.*$'`
-    ac_shift=:
-    ;;
-  --*=)
-    ac_option=`expr "X$1" : 'X$[^=]*$='`
-    ac_optarg=
-    ac_shift=:
-    ;;
-  *)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    $as_echo "$ac_cs_version"; exit ;;
-  --config | --confi | --conf | --con | --co | --c )
-    $as_echo "$ac_cs_config"; exit ;;
-  --debug | --debu | --deb | --de | --d | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    '') as_fn_error $? "missing file argument" ;;
-    esac
-    as_fn_append CONFIG_FILES " '$ac_optarg'"
-    ac_need_defaults=false;;
-  --he | --h |  --help | --hel | -h )
-    $as_echo "$ac_cs_usage"; exit ;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
-  *) as_fn_append ac_config_targets " $1"
-     ac_need_defaults=false ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
-  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-  shift
-  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
-  CONFIG_SHELL='$SHELL'
-  export CONFIG_SHELL
-  exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-  $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
-  case $ac_config_target in
-    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-    "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
-    "bin/rebuild.sh") CONFIG_FILES="$CONFIG_FILES bin/rebuild.sh" ;;
-    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-    "pykolab.spec") CONFIG_FILES="$CONFIG_FILES pykolab.spec" ;;
-    "conf/Makefile") CONFIG_FILES="$CONFIG_FILES conf/Makefile" ;;
-    "kolabd/Makefile") CONFIG_FILES="$CONFIG_FILES kolabd/Makefile" ;;
-    "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
-    "pykolab/constants.py") CONFIG_FILES="$CONFIG_FILES pykolab/constants.py" ;;
-    "pykolab/Makefile") CONFIG_FILES="$CONFIG_FILES pykolab/Makefile" ;;
-    "saslauthd/Makefile") CONFIG_FILES="$CONFIG_FILES saslauthd/Makefile" ;;
-    "share/Makefile") CONFIG_FILES="$CONFIG_FILES share/Makefile" ;;
-    "wallace/Makefile") CONFIG_FILES="$CONFIG_FILES wallace/Makefile" ;;
-    "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;;
-
-  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
-  esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
-  tmp= ac_tmp=
-  trap 'exit_status=$?
-  : "${ac_tmp:=$tmp}"
-  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
-  trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -d "$tmp"
-}  ||
-{
-  tmp=./conf$$-$RANDOM
-  (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
-  eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\\r'
-else
-  ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
-  echo "cat >conf$$subs.awk <<_ACEOF" &&
-  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
-  echo "_ACEOF"
-} >conf$$subs.sh ||
-  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  . ./conf$$subs.sh ||
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
-  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
-  if test $ac_delim_n = $ac_delim_num; then
-    break
-  elif $ac_last_try; then
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/$.\{148\}$..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/$.\{148\}$..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
-  N
-  s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
-  for (key in S) S_is_set[key] = 1
-  FS = "&#x7;"
-
-}
-{
-  line = $ 0
-  nfields = split(line, field, "@")
-  substed = 0
-  len = length(field[1])
-  for (i = 2; i < nfields; i++) {
-    key = field[i]
-    keylen = length(key)
-    if (S_is_set[key]) {
-      value = S[key]
-      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
-      len += length(value) + length(field[++i])
-      substed = 1
-    } else
-      len += 1 + keylen
-  }
-
-  print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
-  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
-  cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
-  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
-h
-s///
-s/^/:/
-s/[	 ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/$=[	 ]*$.*/\1/
-G
-s/\n//
-s/^[^=]*=[	 ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-
-eval set X "  :F $CONFIG_FILES      :C $CONFIG_COMMANDS"
-shift
-for ac_tag
-do
-  case $ac_tag in
-  :[FHLC]) ac_mode=$ac_tag; continue;;
-  esac
-  case $ac_mode$ac_tag in
-  :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
-  :[FH]-) ac_tag=-:-;;
-  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-  esac
-  ac_save_IFS=$IFS
-  IFS=:
-  set x $ac_tag
-  IFS=$ac_save_IFS
-  shift
-  ac_file=$1
-  shift
-
-  case $ac_mode in
-  :L) ac_source=$1;;
-  :[FH])
-    ac_file_inputs=
-    for ac_f
-    do
-      case $ac_f in
-      -) ac_f="$ac_tmp/stdin";;
-      *) # Look for the file first in the build tree, then in the source tree
-	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
-	 # because $ac_f cannot contain `:'.
-	 test -f "$ac_f" ||
-	   case $ac_f in
-	   [\\/$]*) false;;
-	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-	   esac ||
-	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
-      esac
-      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
-      as_fn_append ac_file_inputs " '$ac_f'"
-    done
-
-    # Let's still pretend it is `configure' which instantiates (i.e., don't
-    # use $as_me), people would be surprised to read:
-    #    /* config.h.  Generated by config.status.  */
-    configure_input='Generated from '`
-	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
-	`' by configure.'
-    if test x"$ac_file" != x-; then
-      configure_input="$ac_file.  $configure_input"
-      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
-    fi
-    # Neutralize special characters interpreted by sed in replacement strings.
-    case $configure_input in #(
-    *\&* | *\|* | *\\* )
-       ac_sed_conf_input=`$as_echo "$configure_input" |
-       sed 's/[\\\\&|]/\\\\&/g'`;; #(
-    *) ac_sed_conf_input=$configure_input;;
-    esac
-
-    case $ac_tag in
-    *:-:* | *:-) cat >"$ac_tmp/stdin" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
-    esac
-    ;;
-  esac
-
-  ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X$//$[^/]' \| \
-	 X"$ac_file" : 'X$//$$' \| \
-	 X"$ac_file" : 'X$/$' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
-    sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/\/$[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/\/$$/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/$.*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  as_dir="$ac_dir"; as_fn_mkdir_p
-  ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
-  case $ac_mode in
-  :F)
-  #
-  # CONFIG_FILE
-  #
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-  esac
-  ac_MKDIR_P=$MKDIR_P
-  case $MKDIR_P in
-  [\\/$]* | ?:[\\/]* ) ;;
-  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
-  esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
-  p
-  q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  ac_datarootdir_hack='
-  s&@datadir@&$datadir&g
-  s&@docdir@&$docdir&g
-  s&@infodir@&$infodir&g
-  s&@localedir@&$localedir&g
-  s&@mandir@&$mandir&g
-  s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
-  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
-      "$ac_tmp/out"`; test -z "$ac_out"; } &&
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&2;}
-
-  rm -f "$ac_tmp/stdin"
-  case $ac_file in
-  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
-  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
-  esac \
-  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
-
-
-  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
-$as_echo "$as_me: executing $ac_file commands" >&6;}
- ;;
-  esac
-
-
-  case $ac_file$ac_mode in
-    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
-  # Older Autoconf quotes --file arguments for eval, but not when files
-  # are listed without --file.  Let's play safe and only enable the eval
-  # if we detect the quoting.
-  case $CONFIG_FILES in
-  *\'*) eval set x "$CONFIG_FILES" ;;
-  *)   set x $CONFIG_FILES ;;
-  esac
-  shift
-  for mf
-  do
-    # Strip MF so we end up with the name of the file.
-    mf=`echo "$mf" | sed -e 's/:.*$//'`
-    # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named 'Makefile.in', but
-    # some people rename them; so instead we look at the file content.
-    # Grep'ing the first line is not enough: some people post-process
-    # each Makefile.in and add a new line on top of each file to say so.
-    # Grep'ing the whole file is not good either: AIX grep has a line
-    # limit of 2048, but all sed's we know have understand at least 4000.
-    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-      dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
-	 X"$mf" : 'X$//$[^/]' \| \
-	 X"$mf" : 'X$//$$' \| \
-	 X"$mf" : 'X$/$' \| . 2>/dev/null ||
-$as_echo X"$mf" |
-    sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/\/$[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/\/$$/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/$.*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-    else
-      continue
-    fi
-    # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running 'make'.
-    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-    test -z "$DEPDIR" && continue
-    am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "$am__include" && continue
-    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # Find all dependency output files, they are included files with
-    # $(DEPDIR) in their names.  We invoke sed twice because it is the
-    # simplest approach to changing $(DEPDIR) to its actual value in the
-    # expansion.
-    for file in `sed -n "
-      s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
-      # Make sure the directory exists.
-      test -f "$dirpart/$file" && continue
-      fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
-	 X"$file" : 'X$//$[^/]' \| \
-	 X"$file" : 'X$//$$' \| \
-	 X"$file" : 'X$/$' \| . 2>/dev/null ||
-$as_echo X"$file" |
-    sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/\/$[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/\/$$/{
-	    s//\1/
-	    q
-	  }
-	  /^X$\/$.*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      as_dir=$dirpart/$fdir; as_fn_mkdir_p
-      # echo "creating $dirpart/$file"
-      echo '# dummy' > "$dirpart/$file"
-    done
-  done
-}
- ;;
-    "default-1":C) case "$CONFIG_FILES" in *po/Makefile.in*)
-        sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
-      esac ;;
-    "po/stamp-it":C)
-    if  ! grep "^# INTLTOOL_MAKEFILE$" "po/Makefile.in" > /dev/null ; then
-       as_fn_error $? "po/Makefile.in.in was not created by intltoolize." "$LINENO" 5
-    fi
-    rm -f "po/stamp-it" "po/stamp-it.tmp" "po/POTFILES" "po/Makefile.tmp"
-    >"po/stamp-it.tmp"
-    sed '/^#/d
-	 s/^[[].*] *//
-	 /^[ 	]*$/d
-	'"s|^|	$ac_top_srcdir/|" \
-      "$srcdir/po/POTFILES.in" | sed '$!s/$/ \\/' >"po/POTFILES"
-
-    sed '/^POTFILES =/,/[^\\]$/ {
-		/^POTFILES =/!d
-		r po/POTFILES
-	  }
-	 ' "po/Makefile.in" >"po/Makefile"
-    rm -f "po/Makefile.tmp"
-    mv "po/stamp-it.tmp" "po/stamp-it"
-   ;;
-
-  esac
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
-  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-

pykolab-0.7.tar.gz/doc Added

pykolab-0.7.tar.gz/doc/kolab.1 Added

@@ -0,0 +1,502 @@
+.TH kolab 1 "November 4, 2012" "pykolab 0.6" "USER COMMANDS"
+
+.SH NAME
+kolab \- command-line utility to interact with Kolab Groupware and Cyrus IMAP
+
+.\"
+.\"
+.\" SYNOPSIS Section
+.\"
+.\"
+.SH SYNOPSIS
+.BI "kolab [-c " "config-file" "] [-d " "debug-level" "] [-l " "log-level" "] [--logfile " "log-file" "] "
+.RB "[group] " "command " "[options] [parameters]"
+
+.\"
+.\"
+.\" DESCRIPTION Section
+.\"
+.\"
+.SH DESCRIPTION
+Kolab Groupware command-line utilities that make rain go away.
+.PP
+The
+.BR kolab (1)
+utilities are of an administrative nature, meaning that actions will be executed with the highest level of privileges available. For example, listing the mailboxes a user is subscribed to logs on to IMAP as the Cyrus IMAP administrator (configured in the [cyrus-imap] section of
+.BR kolab.conf (5)),
+and authorize itself as the user before issuing the LSUB command.
+
+.\"
+.\"
+.\" OPTIONS Section
+.\"
+.\"
+.SH OPTIONS
+
+.TP
+.BI "-c " "config-file"
+
+Use
+.I config-file
+instead of the system-wide configuration file
+.IR /etc/kolab/kolab.conf .
+
+.TP
+.BI "-d " "debug-level"
+
+Set the debug level to
+.IR debug-level .
+The default is 0.
+.HP
+.RS
+Trace
+.BR kolab (1)
+itself with debug level 8.
+The maximum debug level of 9 will cause
+.BR kolab (1)
+to perform protocol tracing (on IMAP, HTTP, LDAP, SMTP, LMTP, MANAGESIEVE and other protocols it uses).
+.RE
+
+.TP
+.BI "-h, --help"
+
+Display a short help on usage, including commands and a brief description for each.
+
+.TP
+.BI "-l, --loglevel " "log-level"
+
+Set the
+.BR kolab (1)
+log level to
+.I log-level
+Valid log-levels include DEBUG, INFO, WARN, ERR, CRIT, EMERG.
+.HP
+.RS
+.BR NOTE :
+Setting the debug level to non-zero implies setting a log level of DEBUG.
+.RE
+
+.TP
+.BI "-q, --quiet"
+
+Be quiet \- suppresses output like headers for columns
+
+.TP
+.BI "-y, --yes"
+
+Answer yes to all questions (that ask for confirmation).
+
+.\"
+.\"
+.\" FILES Section
+.\"
+.\"
+.SH FILES
+.I /etc/kolab/kolab.conf
+
+.RS
+The system wide configuration file for Kolab Groupware. See
+.BR kolab.conf (5)
+for further details.
+.RE
+
+.\"
+.\"
+.\" ENVIRONMENT Section
+.\"
+.\"
+.SH ENVIRONMENT
+No environment variables impact the operations of
+.BR kolab (1).
+
+.\"
+.\"
+.\" COMMANDS Section
+.\"
+.\"
+.SH COMMANDS
+
+.TP
+.BI "acl-cleanup " "aci-subject"
+
+Clean up ACLs on mailboxes and mailfolders that refer to the ACI subject
+.I aci-subject
+in any of the ACEs.
+
+.\" .TP
+.\" .BI "add-domain "
+.\" Add a domain name space
+.\"
+.\" .TP
+.\" .BI "add-group "
+.\" Add a group
+.\"
+.\" .TP
+.\" .BI "add-user "
+.\" Add a user
+.\"
+.TP
+.BI "add-user-subscription " "user pattern"
+
+Subscribe
+.I user
+to the mailboxes matching
+.IR pattern .
+See PATTERNS for more information on pattern matching.
+
+.TP
+.BI "cm, create-mailbox [" "--metadata=path,value" "] " mailbox
+
+Create a mailbox
+.I mailbox
+[with metadata
+.I path
+set to
+.IR value ].
+.PP
+.RS
+Valid metadata paths depend on the deployment. Metadata paths are prefixed by a METADATA namespace. See EXAMPLES for usage examples.
+.RE
+
+.TP
+.BI "dam, delete-mailbox-acl " "pattern aci-subject"
+
+Delete ACEs for
+.I aci-subject
+from mailboxes matching
+.IR pattern .
+See PATTERNS for more information on pattern matching.
+
+.\" .TP
+.\" .BI "delete-domain"
+.\" Delete a domain
+.\"
+.\" .TP
+.\" .BI "delete-group"
+.\" Delete a group
+.\"
+.TP
+.BI "dm, delete-mailbox " "pattern"
+
+Delete mailboxes matching
+.IR pattern .
+See PATTERNS for more information on pattern matching.
+
+.\" .TP
+.\" .BI "delete-user"
+.\" Delete a user
+.\"
+.\" .TP
+.\" .BI "export-mailbox"
+.\" Export a mailbox.
+.\"
+.TP
+.BI help
+
+Show a list of commands implemented with
+.BR kolab (1).
+
+.TP
+.BI "lam, list-mailbox-acls " "pattern"
+
+List the ACEs on mailboxes [matching
+.IR pattern ].
+See PATTERNS for more information on pattern matching.
+
+.TP
+.BI "list-deleted-mailboxes " "pattern"
+
+List mailboxes matching
+.IR pattern ,
+that have been deleted.
+See PATTERNS for more information on pattern matching.
+
+.\" .TP
+.\" .BI "list-domains"
+.\" List domain name spaces
+.\"
+.\" .TP
+.\" .BI "list-groups"
+.\" List groups
+.\"
+.TP
+.BI "list-mailbox-metadata " "pattern"
+
+List METADATA on mailboxes matching
+.IR pattern .
+See PATTERNS for more information on pattern matching.
+
+.TP
+.BI "lm, list-mailboxes " "pattern"
+
+List mailboxes [matching
+.IR pattern ].
+See PATTERNS for more information on pattern matching.
+
+.TP
+.BI "lq, list-quota " "pattern"
+
+List quota for mailboxes matching
+.IR pattern .
+See PATTERNS for more information on pattern matching.
+
+.TP
+.BI "list-user-subscriptions " "user"
+
+List the mailboxes
+.I user
+is subscribed to.
+
+.\" .TP
+.\" .BI "remove-mail"
+.\"
+.TP
+.BI "remove-user-subscription [" "user " "[" "pattern" "]]"
+
+Unsubscribe user
+.I user
+from mailboxes matching
+.IR pattern .
+See PATTERNS for more information on pattern matching.
+
+.TP
+.BI "rename-mailbox " "old-mailbox new-mailbox"
+
+Rename
+.IR "old-mailbox " "to " "new-mailbox" "."
+
+.\" .TP
+.\" .BI "role-info"
+.\"
+.TP
+.BI "sam, set-mailbox-acl " "pattern aci-subject access-rights"
+
+Set the ACE for ACI subject
+.I aci-subject
+on mailboxes matching
+.I pattern
+to
+.IR access-rights .
+.PP
+.RS
+Should an ACE for
+.I aci-subject
+already exist, then its permissions are set to
+.IR access-rights .
+Should no ACE for
+.I aci-subject
+exist, then it is added with access rights
+.IR access-rights .
+.RE
+
+.TP
+.BI "set-language " "user " "[" "language" "]"
+
+Set the language for user
+.I user
+[to
+.IR language ].
+.PP
+.RS
+.I language
+should be a language identifier such as 'en_US', or 'de_CH'.
+Omit the
+.I language
+parameter to retrieve a list of languages configured to be associated with the user type in the Kolab Web Administration Panel.
+.PP
+.BR NOTE :
+The language associated with a user impacts the transliteration of their name components in to mail, alias, uid and other 7-bit ascii attributes. To see the full effect before applying this setting, use the Kolab Web Administration Panel.
+.RE
+
+.\" .TP
+.\" .BI "set-mail"
+.\"
+.\" .TP
+.\" .BI "set-mailbox-metadata"
+.\"
+.\" .TP
+.\" .BI "sq, set-quota"
+.\"
+.\" .TP
+.\" .BI "sync"
+.\"
+.TP
+.BI "transfer-mailbox " "mailbox imap-server"
+
+Manually transfer
+.I mailbox
+to IMAP server
+.IR imap-server .
+.PP
+.RS
+In a Cyrus IMAP Murder environment, using LDAP attribute value 'mailHost', transfers a mailbox from one IMAP server to another IMAP server. The client that runs
+.BR kolab (1)
+MUST be able to connect to the current IMAP backend server in order for the transfer to succeed.
+.PP
+.BR NOTE :
+In default Kolab Groupware deployments, the mailHost LDAP attribute will need to match the IMAP server FQDN the user's INBOX resides on. This command does not update the mailHost LDAP attribute value.
+.PP
+This command can be used to move a sub-folder to a different server (note that a separate quota root may need to be created), or to correct an environment out-of-sync.
+.RE
+
+.TP
+.BI "undelete-mailbox " "mailbox " "[" "target-mailbox" "]"
+
+Undelete mailbox
+.I mailbox
+[to target mailbox
+.IR target-mailbox ].
+.PP
+.RS
+Undeletes (restores) the previously deleted mailbox
+.I mailbox
+(if
+.B delete_mode
+is set to
+.I delayed
+in
+.BR imapd.conf (5)).
+If
+.I target-mailbox
+is specified, uses
+.I target-mailbox
+as the root folder to restore the previously deleted mailbox to.
+Otherwise, restores the mailbox
+.I mailbox
+to its original location (from which it was deleted).
+.RE
+
+.\" .TP
+.\" .BI "user-info"
+.\"
+.SS SIEVE COMMANDS
+.BR kolab (1)
+includes a set of sub-commands for Sieve script management.
+
+.TP
+.BI "list " "user"
+
+List the Sieve scripts for user
+.IR user .
+.PP
+.RS
+Lists the names of the Sieve scripts for user
+.IR user ,
+and indicates which script is activated (the script that is executed on LMTP mail delivery to the user's mailbox).
+.PP
+.BR NOTE :
+This script does NOT check the syntax of each script, nor does it determine which scripts reside in the user's personal Sieve namespace but are not active AND not included in any other script. See the
+.BR "kolab" "(1) " "sieve test"
+.I user
+command to get that information.
+.RE
+
+.TP
+.BI "put " "user script-file " "[" "script-name" "]"
+
+Add a new Sieve script with contents
+.I script-file
+under title
+.I script-name
+for user
+.IR user .
+If
+.I script-name
+is not specified, the basename of
+.I script-file
+is used.
+
+.TP
+.BI "refresh " "user"
+
+Refresh the Sieve scripts for user
+.IR user ,
+using the Sieve script management conventions outlined in Kolab Enhancement Proposal #14 (https://wiki.kolab.org/KEP:14).
+
+.TP
+.BI "test " "user"
+
+Test the Sieve scripts for user
+.IR user .
+
+.SS PATTERNS
+Patterns matching mailboxes currently accept two wildcard types:
+
+.TP
+.B "%"
+.PP
+.RS
+Used to match one level of folders.
+.RE
+
+.TP
+.B "*"
+.PP
+.RS
+Used to match all (sub-)levels of folders.
+.RE
+
+.SH EXAMPLES
+
+.TP
+Subscribe user john.doe@example.org to all mailboxes in the shared namespace:
+
+.B kolab add-user-subscription john.doe@example.org shared/*@example.org
+
+.TP
+Create a new calendar folder "Private Calendar" for user john.doe@example.org:
+
+.B kolab create-mailbox --metadata=/shared/vendor/kolab/folder-type,event 'user/john.doe/Private Calendar@example.org'
+.PP
+.RS
+.BR NOTE :
+The
+.I mailbox
+command-line parameter 'user/john.doe/Private Calendar@example.org' needs to be quoted, as it contains a space character.
+
+.BR NOTE :
+Setting folder metadata should adhere to RFC standards and, for Kolab Groupware deployments, Kolab Enhancement Proposal #17 (https://wiki.kolab.org/KEP:17).
+
+For any given deployment, valid custom metadata paths are listed in
+.BR /etc/imapd.annotations.conf .
+.RE
+
+.HP
+List top-level user mailboxes for the example.org authorization realm:
+
+.B "kolab list-mailboxes user/%@example.org"
+
+.HP
+List top-level mailboxes outside any particular authorization realm:
+
+.B "kolab list-mailboxes user/%"
+
+.HP
+List mailboxes for user john.doe@example.org:
+
+.B "kolab list-mailboxes user/john.doe/*@example.org"
+.PP
+.RS
+.BR NOTE :
+The mailbox user/john.doe@example.org itself is not included in the output for this example command.
+.RE
+
+.SH DIAGNOSTICS
+
+.SH ADDITIONAL READING
+
+Additional documentation for Kolab Groupware is available on https://docs.kolab.org
+
+.SH BUGS
+
+You are kindly requested to log bugs against
+.B pykolab
+in https://issues.kolab.org
+
+.SH AUTHOR
+
+Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+
+.SH SEE ALSO
+
+.BR kolab.conf (5),

pykolab-0.7.tar.gz/ext Added

pykolab-0.7.tar.gz/ext/python Added

pykolab-0.7.tar.gz/ext/python/Tools Added

pykolab-0.7.tar.gz/ext/python/Tools/freeze Added

pykolab-0.7.tar.gz/ext/python/Tools/freeze/README Added

@@ -0,0 +1,296 @@
+THE FREEZE SCRIPT
+=================
+
+(Directions for Windows are at the end of this file.)
+
+
+What is Freeze?
+---------------
+
+Freeze make it possible to ship arbitrary Python programs to people
+who don't have Python.  The shipped file (called a "frozen" version of
+your Python program) is an executable, so this only works if your
+platform is compatible with that on the receiving end (this is usually
+a matter of having the same major operating system revision and CPU
+type).
+
+The shipped file contains a Python interpreter and large portions of
+the Python run-time.  Some measures have been taken to avoid linking
+unneeded modules, but the resulting binary is usually not small.
+
+The Python source code of your program (and of the library modules
+written in Python that it uses) is not included in the binary --
+instead, the compiled byte-code (the instruction stream used
+internally by the interpreter) is incorporated.  This gives some
+protection of your Python source code, though not much -- a
+disassembler for Python byte-code is available in the standard Python
+library.  At least someone running "strings" on your binary won't see
+the source.
+
+
+How does Freeze know which modules to include?
+----------------------------------------------
+
+Previous versions of Freeze used a pretty simple-minded algorithm to
+find the modules that your program uses, essentially searching for
+lines starting with the word "import".  It was pretty easy to trick it
+into making mistakes, either missing valid import statements, or
+mistaking string literals (e.g. doc strings) for import statements.
+
+This has been remedied: Freeze now uses the regular Python parser to
+parse the program (and all its modules) and scans the generated byte
+code for IMPORT instructions.  It may still be confused -- it will not
+know about calls to the __import__ built-in function, or about import
+statements constructed on the fly and executed using the 'exec'
+statement, and it will consider import statements even when they are
+unreachable (e.g. "if 0: import foobar").
+
+This new version of Freeze also knows about Python's new package
+import mechanism, and uses exactly the same rules to find imported
+modules and packages.  One exception: if you write 'from package
+import *', Python will look into the __all__ variable of the package
+to determine which modules are to be imported, while Freeze will do a
+directory listing.
+
+One tricky issue: Freeze assumes that the Python interpreter and
+environment you're using to run Freeze is the same one that would be
+used to run your program, which should also be the same whose sources
+and installed files you will learn about in the next section.  In
+particular, your PYTHONPATH setting should be the same as for running
+your program locally.  (Tip: if the program doesn't run when you type
+"python hello.py" there's little chance of getting the frozen version
+to run.)
+
+
+How do I use Freeze?
+--------------------
+
+Normally, you should be able to use it as follows:
+
+	python freeze.py hello.py
+
+where hello.py is your program and freeze.py is the main file of
+Freeze (in actuality, you'll probably specify an absolute pathname
+such as /usr/joe/python/Tools/freeze/freeze.py).
+
+
+What do I do next?
+------------------
+
+Freeze creates a number of files: frozen.c, config.c and Makefile,
+plus one file for each Python module that gets included named
+M_<module>.c.  To produce the frozen version of your program, you can
+simply type "make".  This should produce a binary file.  If the
+filename argument to Freeze was "hello.py", the binary will be called
+"hello".
+
+Note: you can use the -o option to freeze to specify an alternative
+directory where these files are created. This makes it easier to
+clean up after you've shipped the frozen binary.  You should invoke
+"make" in the given directory.
+
+
+Freezing Tkinter programs
+-------------------------
+
+Unfortunately, it is currently not possible to freeze programs that
+use Tkinter without a Tcl/Tk installation. The best way to ship a
+frozen Tkinter program is to decide in advance where you are going
+to place the Tcl and Tk library files in the distributed setup, and
+then declare these directories in your frozen Python program using
+the TCL_LIBRARY, TK_LIBRARY and TIX_LIBRARY environment variables.
+
+For example, assume you will ship your frozen program in the directory 
+<root>/bin/windows-x86 and will place your Tcl library files 
+in <root>/lib/tcl8.2 and your Tk library files in <root>/lib/tk8.2. Then
+placing the following lines in your frozen Python script before importing
+Tkinter or Tix would set the environment correctly for Tcl/Tk/Tix:
+
+import os
+import os.path
+RootDir = os.path.dirname(os.path.dirname(os.getcwd()))
+
+import sys
+if sys.platform == "win32":
+   sys.path = ['', '..\\..\\lib\\python-2.0']
+   os.environ['TCL_LIBRARY'] = RootDir + '\\lib\\tcl8.2'
+   os.environ['TK_LIBRARY'] = RootDir + '\\lib\\tk8.2'
+   os.environ['TIX_LIBRARY'] = RootDir + '\\lib\\tix8.1'
+elif sys.platform == "linux2":
+   sys.path = ['', '../../lib/python-2.0']
+   os.environ['TCL_LIBRARY'] = RootDir + '/lib/tcl8.2'
+   os.environ['TK_LIBRARY'] = RootDir + '/lib/tk8.2'
+   os.environ['TIX_LIBRARY'] = RootDir + '/lib/tix8.1'
+elif sys.platform == "solaris":
+   sys.path = ['', '../../lib/python-2.0']
+   os.environ['TCL_LIBRARY'] = RootDir + '/lib/tcl8.2'
+   os.environ['TK_LIBRARY'] = RootDir + '/lib/tk8.2'
+   os.environ['TIX_LIBRARY'] = RootDir + '/lib/tix8.1'
+
+This also adds <root>/lib/python-2.0 to your Python path
+for any Python files such as _tkinter.pyd you may need.
+
+Note that the dynamic libraries (such as tcl82.dll tk82.dll python20.dll
+under Windows, or libtcl8.2.so and libtcl8.2.so under Unix) are required
+at program load time, and are searched by the operating system loader
+before Python can be started. Under Windows, the environment
+variable PATH is consulted, and under Unix, it may be the
+environment variable LD_LIBRARY_PATH and/or the system
+shared library cache (ld.so). An additional preferred directory for
+finding the dynamic libraries is built into the .dll or .so files at
+compile time - see the LIB_RUNTIME_DIR variable in the Tcl makefile. 
+The OS must find the dynamic libraries or your frozen program won't start. 
+Usually I make sure that the .so or .dll files are in the same directory
+as the executable, but this may not be foolproof.
+
+A workaround to installing your Tcl library files with your frozen
+executable would be possible, in which the Tcl/Tk library files are
+incorporated in a frozen Python module as string literals and written
+to a temporary location when the program runs; this is currently left
+as an exercise for the reader.  An easier approach is to freeze the
+Tcl/Tk/Tix code into the dynamic libraries using the Tcl ET code,
+or the Tix Stand-Alone-Module code. Of course, you can also simply 
+require that Tcl/Tk is required on the target installation, but be 
+careful that the version corresponds.
+
+There are some caveats using frozen Tkinter applications:
+	Under Windows if you use the -s windows option, writing
+to stdout or stderr is an error.
+	The Tcl [info nameofexecutable] will be set to where the
+program was frozen, not where it is run from.
+	The global variables argc and argv do not exist.
+
+
+A warning about shared library modules
+--------------------------------------
+
+When your Python installation uses shared library modules such as 
+_tkinter.pyd, these will not be incorporated in the frozen program.
+ Again, the frozen program will work when you test it, but it won't
+ work when you ship it to a site without a Python installation.
+
+Freeze prints a warning when this is the case at the end of the
+freezing process:
+
+	Warning: unknown modules remain: ...
+
+When this occurs, the best thing to do is usually to rebuild Python
+using static linking only. Or use the approach described in the previous
+section to declare a library path using sys.path, and place the modules
+such as _tkinter.pyd there.
+
+
+Troubleshooting
+---------------
+
+If you have trouble using Freeze for a large program, it's probably
+best to start playing with a really simple program first (like the file
+hello.py).  If you can't get that to work there's something
+fundamentally wrong -- perhaps you haven't installed Python.  To do a
+proper install, you should do "make install" in the Python root
+directory.
+
+
+Usage under Windows 95 or NT
+----------------------------
+
+Under Windows 95 or NT, you *must* use the -p option and point it to
+the top of the Python source tree.
+
+WARNING: the resulting executable is not self-contained; it requires
+the Python DLL, currently PYTHON20.DLL (it does not require the
+standard library of .py files though).  It may also require one or
+more extension modules loaded from .DLL or .PYD files; the module
+names are printed in the warning message about remaining unknown
+modules.
+
+The driver script generates a Makefile that works with the Microsoft
+command line C compiler (CL).  To compile, run "nmake"; this will
+build a target "hello.exe" if the source was "hello.py".  Only the
+files frozenmain.c and frozen.c are used; no config.c is generated or
+used, since the standard DLL is used.
+
+In order for this to work, you must have built Python using the VC++
+(Developer Studio) 5.0 compiler.  The provided project builds
+python20.lib in the subdirectory pcbuild\Release of thje Python source
+tree, and this is where the generated Makefile expects it to be.  If
+this is not the case, you can edit the Makefile or (probably better)
+winmakemakefile.py (e.g., if you are using the 4.2 compiler, the
+python20.lib file is generated in the subdirectory vc40 of the Python
+source tree).
+
+It is possible to create frozen programs that don't have a console
+window, by specifying the option '-s windows'. See the Usage below.
+
+Usage
+-----
+
+Here is a list of all of the options (taken from freeze.__doc__):
+
+usage: freeze [options...] script [module]...
+
+Options:
+-p prefix:    This is the prefix used when you ran ``make install''
+              in the Python build directory.
+              (If you never ran this, freeze won't work.)
+              The default is whatever sys.prefix evaluates to.
+              It can also be the top directory of the Python source
+              tree; then -P must point to the build tree.
+
+-P exec_prefix: Like -p but this is the 'exec_prefix', used to
+                install objects etc.  The default is whatever sys.exec_prefix
+                evaluates to, or the -p argument if given.
+                If -p points to the Python source tree, -P must point
+                to the build tree, if different.
+
+-e extension: A directory containing additional .o files that
+              may be used to resolve modules.  This directory
+              should also have a Setup file describing the .o files.
+              On Windows, the name of a .INI file describing one
+              or more extensions is passed.
+              More than one -e option may be given.
+
+-o dir:       Directory where the output files are created; default '.'.
+
+-m:           Additional arguments are module names instead of filenames.
+
+-a package=dir: Additional directories to be added to the package's
+                __path__.  Used to simulate directories added by the
+                package at runtime (eg, by OpenGL and win32com).
+                More than one -a option may be given for each package.
+
+-l file:      Pass the file to the linker (windows only)
+
+-d:           Debugging mode for the module finder.
+
+-q:           Make the module finder totally quiet.
+
+-h:           Print this help message.
+
+-x module     Exclude the specified module.
+
+-i filename:  Include a file with additional command line options.  Used
+              to prevent command lines growing beyond the capabilities of
+              the shell/OS.  All arguments specified in filename
+              are read and the -i option replaced with the parsed
+              params (note - quoting args in this file is NOT supported)
+
+-s subsystem: Specify the subsystem (For Windows only.); 
+              'console' (default), 'windows', 'service' or 'com_dll'
+              
+-w:           Toggle Windows (NT or 95) behavior.
+              (For debugging only -- on a win32 platform, win32 behavior
+              is automatic.)
+
+Arguments:
+
+script:       The Python script to be executed by the resulting binary.
+
+module ...:   Additional Python modules (referenced by pathname)
+              that will be included in the resulting binary.  These
+              may be .py or .pyc files.  If -m is specified, these are
+              module names that are search in the path instead.
+
+
+
+--Guido van Rossum (home page: http://www.python.org/~guido/)

pykolab-0.7.tar.gz/ext/python/Tools/freeze/bkfile.py Added

@@ -0,0 +1,47 @@
+_orig_open = open
+
+class _BkFile:
+    def __init__(self, file, mode, bufsize):
+        import os
+        self.__filename = file
+        self.__backup = file + '~'
+        try:
+            os.unlink(self.__backup)
+        except os.error:
+            pass
+        try:
+            os.rename(file, self.__backup)
+        except os.error:
+            self.__backup = None
+        self.__file = _orig_open(file, mode, bufsize)
+        self.closed = self.__file.closed
+        self.fileno = self.__file.fileno
+        self.flush = self.__file.flush
+        self.isatty = self.__file.isatty
+        self.mode = self.__file.mode
+        self.name = self.__file.name
+        self.read = self.__file.read
+        self.readinto = self.__file.readinto
+        self.readline = self.__file.readline
+        self.readlines = self.__file.readlines
+        self.seek = self.__file.seek
+        self.softspace = self.__file.softspace
+        self.tell = self.__file.tell
+        self.truncate = self.__file.truncate
+        self.write = self.__file.write
+        self.writelines = self.__file.writelines
+
+    def close(self):
+        self.__file.close()
+        if self.__backup is None:
+            return
+        import filecmp
+        if filecmp.cmp(self.__backup, self.__filename, shallow = 0):
+            import os
+            os.unlink(self.__filename)
+            os.rename(self.__backup, self.__filename)
+
+def open(file, mode = 'r', bufsize = -1):
+    if 'w' not in mode:
+        return _orig_open(file, mode, bufsize)
+    return _BkFile(file, mode, bufsize)

pykolab-0.7.tar.gz/ext/python/Tools/freeze/checkextensions.py Added

@@ -0,0 +1,90 @@
+# Check for a module in a set of extension directories.
+# An extension directory should contain a Setup file
+# and one or more .o files or a lib.a file.
+
+import os
+import parsesetup
+
+def checkextensions(unknown, extensions):
+    files = []
+    modules = []
+    edict = {}
+    for e in extensions:
+        setup = os.path.join(e, 'Setup')
+        liba = os.path.join(e, 'lib.a')
+        if not os.path.isfile(liba):
+            liba = None
+        edict[e] = parsesetup.getsetupinfo(setup), liba
+    for mod in unknown:
+        for e in extensions:
+            (mods, vars), liba = edict[e]
+            if not mods.has_key(mod):
+                continue
+            modules.append(mod)
+            if liba:
+                # If we find a lib.a, use it, ignore the
+                # .o files, and use *all* libraries for
+                # *all* modules in the Setup file
+                if liba in files:
+                    break
+                files.append(liba)
+                for m in mods.keys():
+                    files = files + select(e, mods, vars,
+                                           m, 1)
+                break
+            files = files + select(e, mods, vars, mod, 0)
+            break
+    return files, modules
+
+def select(e, mods, vars, mod, skipofiles):
+    files = []
+    for w in mods[mod]:
+        w = treatword(w)
+        if not w:
+            continue
+        w = expandvars(w, vars)
+        for w in w.split():
+            if skipofiles and w[-2:] == '.o':
+                continue
+            # Assume $var expands to absolute pathname
+            if w[0] not in ('-', '$') and w[-2:] in ('.o', '.a'):
+                w = os.path.join(e, w)
+            if w[:2] in ('-L', '-R') and w[2:3] != '$':
+                w = w[:2] + os.path.join(e, w[2:])
+            files.append(w)
+    return files
+
+cc_flags = ['-I', '-D', '-U']
+cc_exts = ['.c', '.C', '.cc', '.c++']
+
+def treatword(w):
+    if w[:2] in cc_flags:
+        return None
+    if w[:1] == '-':
+        return w # Assume loader flag
+    head, tail = os.path.split(w)
+    base, ext = os.path.splitext(tail)
+    if ext in cc_exts:
+        tail = base + '.o'
+        w = os.path.join(head, tail)
+    return w
+
+def expandvars(str, vars):
+    i = 0
+    while i < len(str):
+        i = k = str.find('$', i)
+        if i < 0:
+            break
+        i = i+1
+        var = str[i:i+1]
+        i = i+1
+        if var == '(':
+            j = str.find(')', i)
+            if j < 0:
+                break
+            var = str[i:j]
+            i = j+1
+        if vars.has_key(var):
+            str = str[:k] + vars[var] + str[i:]
+            i = k
+    return str

pykolab-0.7.tar.gz/ext/python/Tools/freeze/checkextensions_win32.py Added

@@ -0,0 +1,188 @@
+"""Extension management for Windows.
+
+Under Windows it is unlikely the .obj files are of use, as special compiler options
+are needed (primarily to toggle the behavior of "public" symbols.
+
+I dont consider it worth parsing the MSVC makefiles for compiler options.  Even if
+we get it just right, a specific freeze application may have specific compiler
+options anyway (eg, to enable or disable specific functionality)
+
+So my basic stragtegy is:
+
+* Have some Windows INI files which "describe" one or more extension modules.
+  (Freeze comes with a default one for all known modules - but you can specify
+  your own).
+* This description can include:
+  - The MSVC .dsp file for the extension.  The .c source file names
+    are extraced from there.
+  - Specific compiler/linker options
+  - Flag to indicate if Unicode compilation is expected.
+
+At the moment the name and location of this INI file is hardcoded,
+but an obvious enhancement would be to provide command line options.
+"""
+
+import os, sys
+try:
+    import win32api
+except ImportError:
+    win32api = None # User has already been warned
+
+class CExtension:
+    """An abstraction of an extension implemented in C/C++
+    """
+    def __init__(self, name, sourceFiles):
+        self.name = name
+        # A list of strings defining additional compiler options.
+        self.sourceFiles = sourceFiles
+        # A list of special compiler options to be applied to
+        # all source modules in this extension.
+        self.compilerOptions = []
+        # A list of .lib files the final .EXE will need.
+        self.linkerLibs = []
+
+    def GetSourceFiles(self):
+        return self.sourceFiles
+
+    def AddCompilerOption(self, option):
+        self.compilerOptions.append(option)
+    def GetCompilerOptions(self):
+        return self.compilerOptions
+
+    def AddLinkerLib(self, lib):
+        self.linkerLibs.append(lib)
+    def GetLinkerLibs(self):
+        return self.linkerLibs
+
+def checkextensions(unknown, extra_inis, prefix):
+    # Create a table of frozen extensions
+
+    defaultMapName = os.path.join( os.path.split(sys.argv[0])[0], "extensions_win32.ini")
+    if not os.path.isfile(defaultMapName):
+        sys.stderr.write("WARNING: %s can not be found - standard extensions may not be found\n" % defaultMapName)
+    else:
+        # must go on end, so other inis can override.
+        extra_inis.append(defaultMapName)
+
+    ret = []
+    for mod in unknown:
+        for ini in extra_inis:
+#                       print "Looking for", mod, "in", win32api.GetFullPathName(ini),"...",
+            defn = get_extension_defn( mod, ini, prefix )
+            if defn is not None:
+#                               print "Yay - found it!"
+                ret.append( defn )
+                break
+#                       print "Nope!"
+        else: # For not broken!
+            sys.stderr.write("No definition of module %s in any specified map file.\n" % (mod))
+
+    return ret
+
+def get_extension_defn(moduleName, mapFileName, prefix):
+    if win32api is None: return None
+    os.environ['PYTHONPREFIX'] = prefix
+    dsp = win32api.GetProfileVal(moduleName, "dsp", "", mapFileName)
+    if dsp=="":
+        return None
+
+    # We allow environment variables in the file name
+    dsp = win32api.ExpandEnvironmentStrings(dsp)
+    # If the path to the .DSP file is not absolute, assume it is relative
+    # to the description file.
+    if not os.path.isabs(dsp):
+        dsp = os.path.join( os.path.split(mapFileName)[0], dsp)
+    # Parse it to extract the source files.
+    sourceFiles = parse_dsp(dsp)
+    if sourceFiles is None:
+        return None
+
+    module = CExtension(moduleName, sourceFiles)
+    # Put the path to the DSP into the environment so entries can reference it.
+    os.environ['dsp_path'] = os.path.split(dsp)[0]
+    os.environ['ini_path'] = os.path.split(mapFileName)[0]
+
+    cl_options = win32api.GetProfileVal(moduleName, "cl", "", mapFileName)
+    if cl_options:
+        module.AddCompilerOption(win32api.ExpandEnvironmentStrings(cl_options))
+
+    exclude = win32api.GetProfileVal(moduleName, "exclude", "", mapFileName)
+    exclude = exclude.split()
+
+    if win32api.GetProfileVal(moduleName, "Unicode", 0, mapFileName):
+        module.AddCompilerOption('/D UNICODE /D _UNICODE')
+
+    libs = win32api.GetProfileVal(moduleName, "libs", "", mapFileName).split()
+    for lib in libs:
+        module.AddLinkerLib(win32api.ExpandEnvironmentStrings(lib))
+
+    for exc in exclude:
+        if exc in module.sourceFiles:
+            modules.sourceFiles.remove(exc)
+
+    return module
+
+# Given an MSVC DSP file, locate C source files it uses
+# returns a list of source files.
+def parse_dsp(dsp):
+#       print "Processing", dsp
+    # For now, only support
+    ret = []
+    dsp_path, dsp_name = os.path.split(dsp)
+    try:
+        lines = open(dsp, "r").readlines()
+    except IOError, msg:
+        sys.stderr.write("%s: %s\n" % (dsp, msg))
+        return None
+    for line in lines:
+        fields = line.strip().split("=", 2)
+        if fields[0]=="SOURCE":
+            if os.path.splitext(fields[1])[1].lower() in ['.cpp', '.c']:
+                ret.append( win32api.GetFullPathName(os.path.join(dsp_path, fields[1] ) ) )
+    return ret
+
+def write_extension_table(fname, modules):
+    fp = open(fname, "w")
+    try:
+        fp.write (ext_src_header)
+        # Write fn protos
+        for module in modules:
+            # bit of a hack for .pyd's as part of packages.
+            name = module.name.split('.')[-1]
+            fp.write('extern void init%s(void);\n' % (name) )
+        # Write the table
+        fp.write (ext_tab_header)
+        for module in modules:
+            name = module.name.split('.')[-1]
+            fp.write('\t{"%s", init%s},\n' % (name, name) )
+
+        fp.write (ext_tab_footer)
+        fp.write(ext_src_footer)
+    finally:
+        fp.close()
+
+
+ext_src_header = """\
+#include "Python.h"
+"""
+
+ext_tab_header = """\
+
+static struct _inittab extensions[] = {
+"""
+
+ext_tab_footer = """\
+        /* Sentinel */
+        {0, 0}
+};
+"""
+
+ext_src_footer = """\
+extern DL_IMPORT(int) PyImport_ExtendInittab(struct _inittab *newtab);
+
+int PyInitFrozenExtensions()
+{
+        return PyImport_ExtendInittab(extensions);
+}
+
+"""

pykolab-0.7.tar.gz/ext/python/Tools/freeze/extensions_win32.ini Added

@@ -0,0 +1,171 @@
+; This is a list of modules generally build as .pyd files.
+;
+; Each section contains enough information about a module for
+; freeze to include the module as a static, built-in module
+; in a frozen .EXE/.DLL.
+
+; This is all setup for all the win32 extension modules
+; released by Mark Hammond.
+; You must ensure that the environment variable PYTHONEX is set 
+; to point to the root win32 extensions directory
+
+; PYTHONPREFIX must point to the Python build root directory
+; (the *parent* of PCbuild); normally the freeze script takes
+; care of this.
+
+
+
+
+
+;--------------------------------------------------------------
+;
+; Standard Python extension modules
+;
+
+; Here are some of the standard Python extensions modules.
+; If you need others, add them here
+
+[_socket]
+dsp=%PYTHONPREFIX%\PCBuild\_socket.dsp
+
+[_sre]
+dsp=%PYTHONPREFIX%\PCBuild\_sre.dsp
+
+[unicodedata]
+dsp=%PYTHONPREFIX%\PCBuild\unicodedata.dsp
+
+[mmap]
+dsp=%PYTHONPREFIX%\PCBuild\mmap.dsp
+
+[winsound]
+dsp=%PYTHONPREFIX%\PCBuild\winsound.dsp
+libs=winmm.lib
+
+[parser]
+dsp=%PYTHONPREFIX%\PCBuild\parser.dsp
+
+[select]
+dsp=%PYTHONPREFIX%\PCBuild\select.dsp
+
+[zlib]
+dsp=%PYTHONPREFIX%\PCBuild\zlib.dsp
+cl=/I %PYTHONPREFIX%\..\zlib-1.1.4 /D _WINDOWS /D WIN32 
+libs=%PYTHONPREFIX%\..\zlib-1.1.4\zlib.lib /nodefaultlib:libc
+
+[_winreg]
+dsp=%PYTHONPREFIX%\PCBuild\winreg.dsp
+libs=advapi32.lib
+
+
+;--------------------------------------------------------------
+;
+; Win32 Projects.
+;
+[perfmon]
+dsp=%PYTHONEX%\win32\perfmon.dsp
+cl=/I %PYTHONEX%\win32\src
+Unicode=1
+
+[pywintypes]
+dsp=%PYTHONEX%\win32\pywintypes.dsp
+cl=/I %PYTHONEX%\win32\src
+libs=ole32.lib oleaut32.lib
+
+[win32api]
+dsp=%PYTHONEX%\win32\win32api.dsp
+cl=/I %PYTHONEX%\win32\src
+libs=kernel32.lib user32.lib shell32.lib advapi32.lib
+
+[win32service]
+dsp=%PYTHONEX%\win32\win32service.dsp
+cl=/I %PYTHONEX%\win32\src
+Unicode=1
+libs=advapi32.lib
+
+[win32evtlog]
+dsp=%PYTHONEX%\win32\win32evtlog.dsp
+cl=/I %PYTHONEX%\win32\src
+
+[win32process]
+dsp=%PYTHONEX%\win32\win32process.dsp
+cl=/I %PYTHONEX%\win32\src
+
+[win32event]
+dsp=%PYTHONEX%\win32\win32event.dsp
+cl=/I %PYTHONEX%\win32\src
+
+[win32file]
+dsp=%PYTHONEX%\win32\win32file.dsp 
+cl=/I %PYTHONEX%\win32\src
+
+[win32net]
+dsp=%PYTHONEX%\win32\win32net.dsp
+cl=/I %PYTHONEX%\win32\src
+libs=netapi32.lib
+
+[win32pdh]
+dsp=%PYTHONEX%\win32\win32pdh.dsp
+cl=/I %PYTHONEX%\win32\src
+
+[win32pipe]
+dsp=%PYTHONEX%\win32\win32pipe.dsp 
+cl=/I %PYTHONEX%\win32\src
+
+[win32security]
+dsp=%PYTHONEX%\win32\win32security.dsp
+cl=/I %PYTHONEX%\win32\src
+
+[win32service]
+dsp=%PYTHONEX%\win32\win32service.dsp
+cl=/I %PYTHONEX%\win32\src
+
+[win32trace]
+dsp=%PYTHONEX%\win32\win32trace.dsp
+cl=/I %PYTHONEX%\win32\src
+
+;--------------------------------------------------------------
+;
+; COM Projects.
+;
+
+[pythoncom]
+dsp=%PYTHONEX%\com\win32com.dsp
+cl=/I %PYTHONEX%\com\win32com\src\include /I %PYTHONEX%\win32\src
+libs=uuid.lib
+
+[win32com.axcontrol.axcontrol]
+dsp=%PYTHONEX%\com\axcontrol.dsp
+cl=/I %PYTHONEX%\win32\src /I %PYTHONEX%\com\win32com\src\include
+
+[win32com.axscript.axscript]
+dsp=%PYTHONEX%\com\Active Scripting.dsp
+cl=/I %PYTHONEX%\win32\src /I %PYTHONEX%\com\win32com\src\include
+
+[win32com.axdebug.axdebug]
+dsp=%PYTHONEX%\com\Active Debugging.dsp
+cl=/I %PYTHONEX%\win32\src /I %PYTHONEX%\com\win32com\src\include
+
+[win32com.mapi.mapi]
+dsp=%PYTHONEX%\com\mapi.dsp
+cl=/I %PYTHONEX%\win32\src /I %PYTHONEX%\com\win32com\src\include
+libs=MBLOGON.lib ADDRLKUP.LIB mapi32.lib version.lib
+
+[win32com.mapi.exchange]
+dsp=%PYTHONEX%\com\exchange.dsp
+cl=/I %PYTHONEX%\win32\src /I %PYTHONEX%\com\win32com\src\include
+libs=MBLOGON.lib ADDRLKUP.LIB exchinst.lib EDKCFG.LIB EDKUTILS.LIB EDKMAPI.LIB mapi32.lib version.lib
+
+[win32com.mapi.exchdapi]
+dsp=%PYTHONEX%\com\exchdapi.dsp
+cl=/I %PYTHONEX%\win32\src /I %PYTHONEX%\com\win32com\src\include
+libs=DAPI.LIB
+
+[servicemanager]
+dsp=%PYTHONEX%\win32\PythonService EXE.dsp
+Unicode = 1
+
+; Pythonwin
+[win32ui]
+dsp=%PYTHONEX%\Pythonwin\win32ui.dsp
+cl=/D _AFXDLL /D FREEZE_WIN32UI /GX /I %PYTHONEX%\win32\src
+libs=mfc42.lib

pykolab-0.7.tar.gz/ext/python/Tools/freeze/freeze.py Added

@@ -0,0 +1,503 @@
+#! /usr/bin/env python
+
+"""Freeze a Python script into a binary.
+
+usage: freeze [options...] script [module]...
+
+Options:
+-p prefix:    This is the prefix used when you ran ``make install''
+              in the Python build directory.
+              (If you never ran this, freeze won't work.)
+              The default is whatever sys.prefix evaluates to.
+              It can also be the top directory of the Python source
+              tree; then -P must point to the build tree.
+
+-P exec_prefix: Like -p but this is the 'exec_prefix', used to
+                install objects etc.  The default is whatever sys.exec_prefix
+                evaluates to, or the -p argument if given.
+                If -p points to the Python source tree, -P must point
+                to the build tree, if different.
+
+-e extension: A directory containing additional .o files that
+              may be used to resolve modules.  This directory
+              should also have a Setup file describing the .o files.
+              On Windows, the name of a .INI file describing one
+              or more extensions is passed.
+              More than one -e option may be given.
+
+-o dir:       Directory where the output files are created; default '.'.
+
+-m:           Additional arguments are module names instead of filenames.
+
+-a package=dir: Additional directories to be added to the package's
+                __path__.  Used to simulate directories added by the
+                package at runtime (eg, by OpenGL and win32com).
+                More than one -a option may be given for each package.
+
+-l file:      Pass the file to the linker (windows only)
+
+-d:           Debugging mode for the module finder.
+
+-q:           Make the module finder totally quiet.
+
+-h:           Print this help message.
+
+-x module     Exclude the specified module. It will still be imported
+              by the frozen binary if it exists on the host system.
+
+-X module     Like -x, except the module can never be imported by
+              the frozen binary.
+
+-E:           Freeze will fail if any modules can't be found (that
+              were not excluded using -x or -X).
+
+-i filename:  Include a file with additional command line options.  Used
+              to prevent command lines growing beyond the capabilities of
+              the shell/OS.  All arguments specified in filename
+              are read and the -i option replaced with the parsed
+              params (note - quoting args in this file is NOT supported)
+
+-s subsystem: Specify the subsystem (For Windows only.);
+              'console' (default), 'windows', 'service' or 'com_dll'
+
+-w:           Toggle Windows (NT or 95) behavior.
+              (For debugging only -- on a win32 platform, win32 behavior
+              is automatic.)
+
+-r prefix=f:  Replace path prefix.
+              Replace prefix with f in the source path references
+              contained in the resulting binary.
+
+Arguments:
+
+script:       The Python script to be executed by the resulting binary.
+
+module ...:   Additional Python modules (referenced by pathname)
+              that will be included in the resulting binary.  These
+              may be .py or .pyc files.  If -m is specified, these are
+              module names that are search in the path instead.
+
+NOTES:
+
+In order to use freeze successfully, you must have built Python and
+installed it ("make install").
+
+The script should not use modules provided only as shared libraries;
+if it does, the resulting binary is not self-contained.
+"""
+
+
+# Import standard modules
+
+import modulefinder
+import getopt
+import os
+import sys
+
+
+# Import the freeze-private modules
+
+import checkextensions
+import makeconfig
+import makefreeze
+import makemakefile
+import parsesetup
+import bkfile
+
+
+# Main program
+
+def main():
+    # overridable context
+    prefix = None                       # settable with -p option
+    exec_prefix = None                  # settable with -P option
+    extensions = []
+    exclude = []                        # settable with -x option
+    addn_link = []      # settable with -l, but only honored under Windows.
+    path = sys.path[:]
+    modargs = 0
+    debug = 1
+    odir = ''
+    win = sys.platform[:3] == 'win'
+    replace_paths = []                  # settable with -r option
+    error_if_any_missing = 0
+
+    # default the exclude list for each platform
+    if win: exclude = exclude + [
+        'dos', 'dospath', 'mac', 'macpath', 'macfs', 'MACFS', 'posix',
+        'os2', 'ce', 'riscos', 'riscosenviron', 'riscospath',
+        ]
+
+    fail_import = exclude[:]
+
+    # output files
+    frozen_c = 'frozen.c'
+    config_c = 'config.c'
+    target = 'a.out'                    # normally derived from script name
+    makefile = 'Makefile'
+    subsystem = 'console'
+
+    # parse command line by first replacing any "-i" options with the
+    # file contents.
+    pos = 1
+    while pos < len(sys.argv)-1:
+        # last option can not be "-i", so this ensures "pos+1" is in range!
+        if sys.argv[pos] == '-i':
+            try:
+                options = open(sys.argv[pos+1]).read().split()
+            except IOError, why:
+                usage("File name '%s' specified with the -i option "
+                      "can not be read - %s" % (sys.argv[pos+1], why) )
+            # Replace the '-i' and the filename with the read params.
+            sys.argv[pos:pos+2] = options
+            pos = pos + len(options) - 1 # Skip the name and the included args.
+        pos = pos + 1
+
+    # Now parse the command line with the extras inserted.
+    try:
+        opts, args = getopt.getopt(sys.argv[1:], 'r:a:dEe:hmo:p:P:b:qs:wX:x:l:')
+    except getopt.error, msg:
+        usage('getopt error: ' + str(msg))
+
+    # proces option arguments
+    for o, a in opts:
+        if o == '-h':
+            print __doc__
+            return
+        if o == '-b':
+            binlib = a
+        if o == '-d':
+            debug = debug + 1
+        if o == '-e':
+            extensions.append(a)
+        if o == '-m':
+            modargs = 1
+        if o == '-o':
+            odir = a
+        if o == '-p':
+            prefix = a
+        if o == '-P':
+            exec_prefix = a
+        if o == '-q':
+            debug = 0
+        if o == '-w':
+            win = not win
+        if o == '-s':
+            if not win:
+                usage("-s subsystem option only on Windows")
+            subsystem = a
+        if o == '-x':
+            exclude.append(a)
+        if o == '-X':
+            exclude.append(a)
+            fail_import.append(a)
+        if o == '-E':
+            error_if_any_missing = 1
+        if o == '-l':
+            addn_link.append(a)
+        if o == '-a':
+            apply(modulefinder.AddPackagePath, tuple(a.split("=", 2)))
+        if o == '-r':
+            f,r = a.split("=", 2)
+            replace_paths.append( (f,r) )
+
+    # modules that are imported by the Python runtime
+    implicits = []
+    for module in ('site', 'warnings',):
+        if module not in exclude:
+            implicits.append(module)
+
+    # default prefix and exec_prefix
+    if not exec_prefix:
+        if prefix:
+            exec_prefix = prefix
+        else:
+            exec_prefix = sys.exec_prefix
+    if not prefix:
+        prefix = sys.prefix
+
+    # determine whether -p points to the Python source tree
+    ishome = os.path.exists(os.path.join(prefix, 'Python', 'ceval.c'))
+
+    # locations derived from options
+    version = sys.version[:3]
+    if win:
+        extensions_c = 'frozen_extensions.c'
+    if ishome:
+        print "(Using Python source directory)"
+        binlib = exec_prefix
+        incldir = os.path.join(prefix, 'Include')
+        config_h_dir = exec_prefix
+        config_c_in = os.path.join(prefix, 'Modules', 'config.c.in')
+        frozenmain_c = os.path.join(prefix, 'Python', 'frozenmain.c')
+        makefile_in = os.path.join(exec_prefix, 'Makefile')
+        if win:
+            frozendllmain_c = os.path.join(exec_prefix, 'Pc\\frozen_dllmain.c')
+    else:
+        if not binlib:
+            binlib = os.path.join(exec_prefix,
+                              'lib', 'python%s' % version, 'config')
+        else:
+            binlib = os.path.join(binlib, 'python%s' % version, 'config')
+
+        incldir = os.path.join(prefix, 'include', 'python%s' % version)
+        config_h_dir = os.path.join(exec_prefix, 'include',
+                                    'python%s' % version)
+        config_c_in = os.path.join(binlib, 'config.c.in')
+        frozenmain_c = os.path.join(binlib, 'frozenmain.c')
+        makefile_in = os.path.join(binlib, 'Makefile')
+        frozendllmain_c = os.path.join(binlib, 'frozen_dllmain.c')
+    supp_sources = []
+    defines = []
+    includes = ['-I' + incldir, '-I' + config_h_dir]
+
+    # sanity check of directories and files
+    check_dirs = [prefix, exec_prefix, binlib, incldir]
+    if not win:
+        # These are not directories on Windows.
+        check_dirs = check_dirs + extensions
+    for dir in check_dirs:
+        if not os.path.exists(dir):
+            usage('needed directory %s not found' % dir)
+        if not os.path.isdir(dir):
+            usage('%s: not a directory' % dir)
+    if win:
+        files = supp_sources + extensions # extensions are files on Windows.
+    else:
+        files = [config_c_in, makefile_in] + supp_sources
+    for file in supp_sources:
+        if not os.path.exists(file):
+            usage('needed file %s not found' % file)
+        if not os.path.isfile(file):
+            usage('%s: not a plain file' % file)
+    if not win:
+        for dir in extensions:
+            setup = os.path.join(dir, 'Setup')
+            if not os.path.exists(setup):
+                usage('needed file %s not found' % setup)
+            if not os.path.isfile(setup):
+                usage('%s: not a plain file' % setup)
+
+    # check that enough arguments are passed
+    if not args:
+        usage('at least one filename argument required')
+
+    # check that file arguments exist
+    for arg in args:
+        if arg == '-m':
+            break
+        # if user specified -m on the command line before _any_
+        # file names, then nothing should be checked (as the
+        # very first file should be a module name)
+        if modargs:
+            break
+        if not os.path.exists(arg):
+            usage('argument %s not found' % arg)
+        if not os.path.isfile(arg):
+            usage('%s: not a plain file' % arg)
+
+    # process non-option arguments
+    scriptfile = args[0]
+    modules = args[1:]
+
+    # derive target name from script name
+    base = os.path.basename(scriptfile)
+    base, ext = os.path.splitext(base)
+    if base:
+        if base != scriptfile:
+            target = base
+        else:
+            target = base + '.bin'
+
+    # handle -o option
+    base_frozen_c = frozen_c
+    base_config_c = config_c
+    base_target = target
+    if odir and not os.path.isdir(odir):
+        try:
+            os.mkdir(odir)
+            print "Created output directory", odir
+        except os.error, msg:
+            usage('%s: mkdir failed (%s)' % (odir, str(msg)))
+    base = ''
+    if odir:
+        base = os.path.join(odir, '')
+        frozen_c = os.path.join(odir, frozen_c)
+        config_c = os.path.join(odir, config_c)
+        target = os.path.join(odir, target)
+        makefile = os.path.join(odir, makefile)
+        if win: extensions_c = os.path.join(odir, extensions_c)
+
+    # Handle special entry point requirements
+    # (on Windows, some frozen programs do not use __main__, but
+    # import the module directly.  Eg, DLLs, Services, etc
+    custom_entry_point = None  # Currently only used on Windows
+    python_entry_is_main = 1   # Is the entry point called __main__?
+    # handle -s option on Windows
+    if win:
+        import winmakemakefile
+        try:
+            custom_entry_point, python_entry_is_main = \
+                winmakemakefile.get_custom_entry_point(subsystem)
+        except ValueError, why:
+            usage(why)
+
+
+    # Actual work starts here...
+
+    # collect all modules of the program
+    dir = os.path.dirname(scriptfile)
+    path[0] = dir
+    mf = modulefinder.ModuleFinder(path, debug, exclude, replace_paths)
+
+    if win and subsystem=='service':
+        # If a Windows service, then add the "built-in" module.
+        mod = mf.add_module("servicemanager")
+        mod.__file__="dummy.pyd" # really built-in to the resulting EXE
+
+    for mod in implicits:
+        mf.import_hook(mod)
+    for mod in modules:
+        if mod == '-m':
+            modargs = 1
+            continue
+        if modargs:
+            if mod[-2:] == '.*':
+                mf.import_hook(mod[:-2], None, ["*"])
+            else:
+                mf.import_hook(mod)
+        else:
+            mf.load_file(mod)
+
+    # Add the main script as either __main__, or the actual module name.
+    if python_entry_is_main:
+        mf.run_script(scriptfile)
+    else:
+        mf.load_file(scriptfile)
+
+    if debug > 0:
+        mf.report()
+        print
+    dict = mf.modules
+
+    if error_if_any_missing:
+        missing = mf.any_missing()
+        if missing:
+            sys.exit("There are some missing modules: %r" % missing)
+
+    # generate output for frozen modules
+    files = makefreeze.makefreeze(base, dict, debug, custom_entry_point,
+                                  fail_import)
+
+    # look for unfrozen modules (builtin and of unknown origin)
+    builtins = []
+    unknown = []
+    mods = dict.keys()
+    mods.sort()
+    for mod in mods:
+        if dict[mod].__code__:
+            continue
+        if not dict[mod].__file__:
+            builtins.append(mod)
+        else:
+            unknown.append(mod)
+
+    # search for unknown modules in extensions directories (not on Windows)
+    addfiles = []
+    frozen_extensions = [] # Windows list of modules.
+    if unknown or (not win and builtins):
+        if not win:
+            addfiles, addmods = \
+                      checkextensions.checkextensions(unknown+builtins,
+                                                      extensions)
+            for mod in addmods:
+                if mod in unknown:
+                    unknown.remove(mod)
+                    builtins.append(mod)
+        else:
+            # Do the windows thang...
+            import checkextensions_win32
+            # Get a list of CExtension instances, each describing a module
+            # (including its source files)
+            frozen_extensions = checkextensions_win32.checkextensions(
+                unknown, extensions, prefix)
+            for mod in frozen_extensions:
+                unknown.remove(mod.name)
+
+    # report unknown modules
+    if unknown:
+        sys.stderr.write('Warning: unknown modules remain: %s\n' %
+                         ' '.join(unknown))
+
+    # windows gets different treatment
+    if win:
+        # Taking a shortcut here...
+        import winmakemakefile, checkextensions_win32
+        checkextensions_win32.write_extension_table(extensions_c,
+                                                    frozen_extensions)
+        # Create a module definition for the bootstrap C code.
+        xtras = [frozenmain_c, os.path.basename(frozen_c),
+                 frozendllmain_c, os.path.basename(extensions_c)] + files
+        maindefn = checkextensions_win32.CExtension( '__main__', xtras )
+        frozen_extensions.append( maindefn )
+        outfp = open(makefile, 'w')
+        try:
+            winmakemakefile.makemakefile(outfp,
+                                         locals(),
+                                         frozen_extensions,
+                                         os.path.basename(target))
+        finally:
+            outfp.close()
+        return
+
+    # generate config.c and Makefile
+    builtins.sort()
+    infp = open(config_c_in)
+    outfp = bkfile.open(config_c, 'w')
+    try:
+        makeconfig.makeconfig(infp, outfp, builtins)
+    finally:
+        outfp.close()
+    infp.close()
+
+    cflags = ['$(OPT)']
+    cppflags = defines + includes
+    libs = [os.path.join(binlib, 'libpython$(VERSION).so')]
+
+    somevars = {}
+    if os.path.exists(makefile_in):
+        makevars = parsesetup.getmakevars(makefile_in)
+        for key in makevars.keys():
+            somevars[key] = makevars[key]
+
+    somevars['CFLAGS'] = ' '.join(cflags) # override
+    somevars['CPPFLAGS'] = ' '.join(cppflags) # override
+    files = [base_config_c, base_frozen_c] + \
+            files + supp_sources +  addfiles + libs + \
+            ['$(MODLIBS)', '$(LIBS)', '$(SYSLIBS)']
+
+    outfp = bkfile.open(makefile, 'w')
+    try:
+        makemakefile.makemakefile(outfp, somevars, files, base_target)
+    finally:
+        outfp.close()
+
+    # Done!
+
+    if odir:
+        print 'Now run "make" in', odir,
+        print 'to build the target:', base_target
+    else:
+        print 'Now run "make" to build the target:', base_target
+
+
+# Print usage message and exit
+
+def usage(msg):
+    sys.stdout = sys.stderr
+    print "Error:", msg
+    print "Use ``%s -h'' for help" % sys.argv[0]
+    sys.exit(2)
+
+
+main()

pykolab-0.7.tar.gz/ext/python/Tools/freeze/hello.py Added

pykolab-0.7.tar.gz/ext/python/Tools/freeze/makeconfig.py Added

@@ -0,0 +1,61 @@
+import re
+
+
+# Write the config.c file
+
+never = ['marshal', '__main__', '__builtin__', 'sys', 'exceptions', '_warnings']
+
+def makeconfig(infp, outfp, modules, with_ifdef=0):
+    m1 = re.compile('-- ADDMODULE MARKER 1 --')
+    m2 = re.compile('-- ADDMODULE MARKER 2 --')
+    while 1:
+        line = infp.readline()
+        if not line: break
+        outfp.write(line)
+        if m1 and m1.search(line):
+            m1 = None
+            for mod in modules:
+                if mod in never:
+                    continue
+                if with_ifdef:
+                    outfp.write("#ifndef init%s\n"%mod)
+                outfp.write('extern void init%s(void);\n' % mod)
+                if with_ifdef:
+                    outfp.write("#endif\n")
+        elif m2 and m2.search(line):
+            m2 = None
+            for mod in modules:
+                if mod in never:
+                    continue
+                outfp.write('\t{"%s", init%s},\n' %
+                            (mod, mod))
+    if m1:
+        sys.stderr.write('MARKER 1 never found\n')
+    elif m2:
+        sys.stderr.write('MARKER 2 never found\n')
+
+
+# Test program.
+
+def test():
+    import sys
+    if not sys.argv[3:]:
+        print 'usage: python makeconfig.py config.c.in outputfile',
+        print 'modulename ...'
+        sys.exit(2)
+    if sys.argv[1] == '-':
+        infp = sys.stdin
+    else:
+        infp = open(sys.argv[1])
+    if sys.argv[2] == '-':
+        outfp = sys.stdout
+    else:
+        outfp = open(sys.argv[2], 'w')
+    makeconfig(infp, outfp, sys.argv[3:])
+    if outfp != sys.stdout:
+        outfp.close()
+    if infp != sys.stdin:
+        infp.close()
+
+if __name__ == '__main__':
+    test()

pykolab-0.7.tar.gz/ext/python/Tools/freeze/makefreeze.py Added

@@ -0,0 +1,90 @@
+import marshal
+import bkfile
+
+
+# Write a file containing frozen code for the modules in the dictionary.
+
+header = """
+#include "Python.h"
+
+static struct _frozen _PyImport_FrozenModules[] = {
+"""
+trailer = """\
+    {0, 0, 0} /* sentinel */
+};
+"""
+
+# if __debug__ == 0 (i.e. -O option given), set Py_OptimizeFlag in frozen app.
+default_entry_point = """
+int
+main(int argc, char **argv)
+{
+        extern int Py_FrozenMain(int, char **);
+""" + ((not __debug__ and """
+        Py_OptimizeFlag++;
+""") or "")  + """
+        PyImport_FrozenModules = _PyImport_FrozenModules;
+        return Py_FrozenMain(argc, argv);
+}
+
+"""
+
+def makefreeze(base, dict, debug=0, entry_point=None, fail_import=()):
+    if entry_point is None: entry_point = default_entry_point
+    done = []
+    files = []
+    mods = dict.keys()
+    mods.sort()
+    for mod in mods:
+        m = dict[mod]
+        mangled = "__".join(mod.split("."))
+        if m.__code__:
+            file = 'M_' + mangled + '.c'
+            outfp = bkfile.open(base + file, 'w')
+            files.append(file)
+            if debug:
+                print "freezing", mod, "..."
+            str = marshal.dumps(m.__code__)
+            size = len(str)
+            if m.__path__:
+                # Indicate package by negative size
+                size = -size
+            done.append((mod, mangled, size))
+            writecode(outfp, mangled, str)
+            outfp.close()
+    if debug:
+        print "generating table of frozen modules"
+    outfp = bkfile.open(base + 'frozen.c', 'w')
+    for mod, mangled, size in done:
+        outfp.write('extern unsigned char M_%s[];\n' % mangled)
+    outfp.write(header)
+    for mod, mangled, size in done:
+        outfp.write('\t{"%s", M_%s, %d},\n' % (mod, mangled, size))
+    outfp.write('\n')
+    # The following modules have a NULL code pointer, indicating
+    # that the prozen program should not search for them on the host
+    # system. Importing them will *always* raise an ImportError.
+    # The zero value size is never used.
+    for mod in fail_import:
+        outfp.write('\t{"%s", NULL, 0},\n' % (mod,))
+    outfp.write(trailer)
+    outfp.write(entry_point)
+    outfp.close()
+    return files
+
+
+
+# Write a C initializer for a module containing the frozen python code.
+# The array is called M_<mod>.
+
+def writecode(outfp, mod, str):
+    outfp.write('unsigned char M_%s[] = {' % mod)
+    for i in range(0, len(str), 16):
+        outfp.write('\n\t')
+        for c in str[i:i+16]:
+            outfp.write('%d,' % ord(c))
+    outfp.write('\n};\n')
+
+## def writecode(outfp, mod, str):
+##     outfp.write('unsigned char M_%s[%d] = "%s";\n' % (mod, len(str),
+##     '\\"'.join(map(lambda s: repr(s)[1:-1], str.split('"')))))

pykolab-0.7.tar.gz/ext/python/Tools/freeze/makemakefile.py Added

pykolab-0.7.tar.gz/ext/python/Tools/freeze/parsesetup.py Added

@@ -0,0 +1,112 @@
+# Parse Makefiles and Python Setup(.in) files.
+
+import re
+
+
+# Extract variable definitions from a Makefile.
+# Return a dictionary mapping names to values.
+# May raise IOError.
+
+makevardef = re.compile('^([a-zA-Z0-9_]+)[ \t]*=(.*)')
+
+def getmakevars(filename):
+    variables = {}
+    fp = open(filename)
+    pendingline = ""
+    try:
+        while 1:
+            line = fp.readline()
+            if pendingline:
+                line = pendingline + line
+                pendingline = ""
+            if not line:
+                break
+            if line.endswith('\\\n'):
+                pendingline = line[:-2]
+            matchobj = makevardef.match(line)
+            if not matchobj:
+                continue
+            (name, value) = matchobj.group(1, 2)
+            # Strip trailing comment
+            i = value.find('#')
+            if i >= 0:
+                value = value[:i]
+            value = value.strip()
+            variables[name] = value
+    finally:
+        fp.close()
+    return variables
+
+
+# Parse a Python Setup(.in) file.
+# Return two dictionaries, the first mapping modules to their
+# definitions, the second mapping variable names to their values.
+# May raise IOError.
+
+setupvardef = re.compile('^([a-zA-Z0-9_]+)=(.*)')
+
+def getsetupinfo(filename):
+    modules = {}
+    variables = {}
+    fp = open(filename)
+    pendingline = ""
+    try:
+        while 1:
+            line = fp.readline()
+            if pendingline:
+                line = pendingline + line
+                pendingline = ""
+            if not line:
+                break
+            # Strip comments
+            i = line.find('#')
+            if i >= 0:
+                line = line[:i]
+            if line.endswith('\\\n'):
+                pendingline = line[:-2]
+                continue
+            matchobj = setupvardef.match(line)
+            if matchobj:
+                (name, value) = matchobj.group(1, 2)
+                variables[name] = value.strip()
+            else:
+                words = line.split()
+                if words:
+                    modules[words[0]] = words[1:]
+    finally:
+        fp.close()
+    return modules, variables
+
+
+# Test the above functions.
+
+def test():
+    import sys
+    import os
+    if not sys.argv[1:]:
+        print 'usage: python parsesetup.py Makefile*|Setup* ...'
+        sys.exit(2)
+    for arg in sys.argv[1:]:
+        base = os.path.basename(arg)
+        if base[:8] == 'Makefile':
+            print 'Make style parsing:', arg
+            v = getmakevars(arg)
+            prdict(v)
+        elif base[:5] == 'Setup':
+            print 'Setup style parsing:', arg
+            m, v = getsetupinfo(arg)
+            prdict(m)
+            prdict(v)
+        else:
+            print arg, 'is neither a Makefile nor a Setup file'
+            print '(name must begin with "Makefile" or "Setup")'
+
+def prdict(d):
+    keys = d.keys()
+    keys.sort()
+    for key in keys:
+        value = d[key]
+        print "%-15s" % key, str(value)
+
+if __name__ == '__main__':
+    test()

pykolab-0.7.tar.gz/ext/python/Tools/freeze/win32.html Added

@@ -0,0 +1,119 @@
+<HTML>
+<HEAD>
+<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=windows-1252">
+<META NAME="Generator" CONTENT="Microsoft Word 97">
+<TITLE>win32</TITLE>
+<META NAME="Version" CONTENT="8.0.3410">
+<META NAME="Date" CONTENT="10/11/96">
+<META NAME="Template" CONTENT="D:\Program Files\Microsoft Office\Office\HTML.DOT">
+</HEAD>
+<BODY TEXT="#000000" BGCOLOR="#ffffff">
+
+<H1>Freeze for Win32</H1>
+<P>This document describes how to use Freeze for the Win32 platform.  </P>
+<P>Freeze itself is a Python tool for creating stand-alone executables from Python source code.  This document does not attempt to document freeze itself - only the win32 specific changes.</P>
+<H2>Frozen programs under Win32</H2>
+<P>Frozen programs under Win32 can (theoretically) freeze any type of program supported by Python on Win32 - At the moment, Console .EXE and NT Service .EXE programs are supported.  GUI Python programs and COM .EXE programs are very nearly all ready to go.</P>
+<H3>Program Dependencies</H3>
+<P>The person freezing the program has control over what external DLLs are required by a frozen program.  The following dependencies are supported:</P>
+<H4>Minimal frozen programs</H4>
+<P>These programs freeze only .py files in your program.  All external DLLs are required at run-time.  This includes all .pyd/.dll modules used by your program, Python20.dll, and msvcrt.dll.  </P>
+<P>A small Python program would typically create a .EXE around 300kb.</P>
+<H4>Frozen Extension programs</H4>
+<B><I><P>Note:</B></I> For Python1.5.1, you must get a patch from Guido to import.c for this to work.</P>
+<P>These programs also freeze in the sources from all .pyd and .dll files used at runtime.  This means the resulting .EXE is only dependent on Python20.dll and msvcrt.dll.</P>
+<P>A small Python program using win32api, win32con and one or 2 other win32 extensions would typically create a .EXE around 400kb.</P>
+<H4>Completely frozen programs</H4>
+<P>Completely stand-alone programs, as is the default on Unix systems.  These are currently not supported, mainly as the size of a decent Python program gets very large.  However, by tweaking the existing Unix support, this would not be difficult to do.</P>
+<H2>Freezing Extension Modules</H2>
+<P>By default, a file in the main "freeze" directory called "extensions_win32.ini" is used to obtain information about frozen extensions.  A typical entry is:</P>
+<CODE><P>[win32api]</P>
+<P>dsp=%PYTHONEX%\win32\win32api.dsp</P>
+<P>cl=/I %PYTHONEX%\win32\src</P>
+<P>libs=kernel32.lib user32.lib shell32.lib advapi32.lib</P>
+</CODE><P>&nbsp;</P>
+<P>This entry indicates that the win32api extension module is defined in the MSVC project file "<CODE>%PYTHONEX%\win32\win32api.dsp</CODE>".  Note the use of<CODE> </CODE>"<CODE>%PYTHONEX%" </CODE>- most strings are substituted with environment variables. In this case, it is assumed variable PYTHONEX points to the main "Python Extensions" source directory (which is assumed to be in the same structure as the release of the extension sources).</P>
+<P>An entry in a .INI file can also control specific compiler options, and also the .lib files necessary to be linked with the application.</P>
+<H3>Freezing Extension Module Considerations</H3>
+<P>To prevent freezing extension modules, simply exclude that module using the freeze "-x" switch.</P>
+<P>Occasionally, it will be necessary to explicitly include dependent modules.  For example, many win32 modules are dependent on the "pywintypes" module - for example, the win32api module.  In this case, the module may be explicitly included using the freeze "-m" option.</P>
+<H3>Freezing win32com and PythonCOM</H3>
+<P>PythonCOM.dll can be frozen as long as you are not implementing COM Servers.  Ie, you can freeze programs which control other applications, but can not implement programs that are themselves controlled by other applications.</P>
+<P>If you use any of the win32com .pyd extensions (ex, axscript, mapi, internet, axcontrol), then you will need to specify an additional "-a" option to point to the win32comext directory.  There is an example below.</P>
+<P>The use of the "win32com.client.gencache" module is not supported (although could be quite easily??)</P>
+<H2>Examples</H2>
+<P>Before we start, we must:</P>
+<CODE><P>D:\temp\delme&gt;set PYTHONEX=d:\src\pythonex</P>
+</CODE><H3>Helloworld.py</H3>
+<H4>Source Code</H4><DIR>
+<DIR>
+
+<CODE><P>import sys</P>
+<P>&nbsp;</P>
+<P>print " ".join( ["Hello", "world"] + sys.argv[1:] )</P></DIR>
+</DIR>
+
+</CODE><H4>Command Line used</H4><DIR>
+<DIR>
+
+<FONT FACE="Courier New" SIZE=2><P>\src\python-1.5.1\tools\freeze\freeze.py helloworld.py</P>
+<P>nmake</P></DIR>
+</DIR>
+
+</FONT><P>Resulting helloworld.exe: 114,688 bytes.</P>
+<H3>Helloworld2.py</H3>
+<P>Uses win32api.  Demonstrates requirement for pywintypes, and difference between freezing extensions and not.</P>
+<H4>Source Code</H4><DIR>
+<DIR>
+
+<P>import win32api</P>
+<P>print "Hello from", win32api.GetComputerName()</P></DIR>
+</DIR>
+
+<H4>Command Line used</H4>
+<P>By default, win32api will be frozen in with the .EXE.  If you do not provide the "pywintypes" inclusion, then the link step will fail looking for all the pywintypes modules.</P><DIR>
+<DIR>
+
+<FONT FACE="Courier New" SIZE=2><P>\src\python-1.5.1\tools\freeze\freeze.py helloworld2.py -m pywintypes</P>
+<P>nmake</P></DIR>
+</DIR>
+
+</FONT><P>Resulting helloworld2.exe: 167,936 bytes</P>
+<P>Simply adding win32con to the mix gives an EXE of size: 352,768 bytes.</P>
+<H4>Command Line used</H4>
+<P>Using this build, we are dependent at runtime on the win32api.pyd and pywintypes15.dll files.</P><DIR>
+<DIR>
+
+<P>\src\python-1.5.1\tools\freeze\freeze.py -x win32api helloworld.py</P></DIR>
+</DIR>
+
+<P>Resulting helloworld2.exe: 114,688</P>
+<P>Adding win32con to this build results in a size of: 252,928</P>
+<H3>Testmapi.py</H3>
+<P>Uses MAPI, a PythonCOM extension, and win32api.</P>
+<H4>Source Code</H4>
+<P>from win32com.mapi import mapi</P>
+<P>import win32api</P>
+<P>mapi.MAPIInitialize( (mapi.MAPI_INIT_VERSION, 0) )</P>
+<P>print "Hello from", win32api.GetComputerName()</P>
+<P>mapi.MAPIUninitialize()</P>
+<H4>Command Line used</H4>
+<P>As it does not import pythoncom or pywintypes itself, they must be specified.  As it uses the win32comext directory, -a must be used.  If you have built the win32com extensions from sources, then the second -a is required.</P><DIR>
+<DIR>
+
+<CODE><P>\src\python-1.5.1\tools\freeze\freeze.py -a win32com=%PYTHONEX%\com\win32comext -a win32com.mapi=%PYTHONEX%\com\build\release testmapi.py -m pywintypes -m pythoncom</P></DIR>
+</DIR>
+
+</CODE><P>Resulting testmapi.exe: 352,768 bytes</P>
+<H3>PipeTestService.py</H3>
+<P>This is a standard Python demo in the Win32 extensions.  It can be found in the "win32\demos\service" directory.</P>
+<H4>Command Line used</H4>
+<P>This will create a native NT Service EXE, dependent only on the main Python20.dll.  All other modules are built-in to the final .EXE</P><DIR>
+<DIR>
+
+<CODE><P>\src\python-1.5.1\tools\freeze\freeze.py -s service %PYTHONEX%\win32\demos\service\pipeTestService.py</P></DIR>
+</DIR>
+
+<P>Resulting pipeTestService.exe: </CODE><FONT FACE="Courier New" SIZE=2>533,504 bytes.</P></FONT></BODY>
+</HTML>
+

pykolab-0.7.tar.gz/ext/python/Tools/freeze/winmakemakefile.py Added

@@ -0,0 +1,146 @@
+import sys, os
+
+# Template used then the program is a GUI program
+WINMAINTEMPLATE = """
+#include <windows.h>
+
+int WINAPI WinMain(
+    HINSTANCE hInstance,      // handle to current instance
+    HINSTANCE hPrevInstance,  // handle to previous instance
+    LPSTR lpCmdLine,          // pointer to command line
+    int nCmdShow              // show state of window
+    )
+{
+    extern int Py_FrozenMain(int, char **);
+    PyImport_FrozenModules = _PyImport_FrozenModules;
+    return Py_FrozenMain(__argc, __argv);
+}
+"""
+
+SERVICETEMPLATE = """
+extern int PythonService_main(int, char **);
+
+int main( int argc, char **argv)
+{
+    PyImport_FrozenModules = _PyImport_FrozenModules;
+    return PythonService_main(argc, argv);
+}
+"""
+
+subsystem_details = {
+    # -s flag        : (C entry point template), (is it __main__?), (is it a DLL?)
+    'console'        : (None,                    1,                 0),
+    'windows'        : (WINMAINTEMPLATE,         1,                 0),
+    'service'        : (SERVICETEMPLATE,         0,                 0),
+    'com_dll'        : ("",                      0,                 1),
+}
+
+def get_custom_entry_point(subsystem):
+    try:
+        return subsystem_details[subsystem][:2]
+    except KeyError:
+        raise ValueError, "The subsystem %s is not known" % subsystem
+
+
+def makemakefile(outfp, vars, files, target):
+    save = sys.stdout
+    try:
+        sys.stdout = outfp
+        realwork(vars, files, target)
+    finally:
+        sys.stdout = save
+
+def realwork(vars, moddefns, target):
+    version_suffix = "%r%r" % sys.version_info[:2]
+    print "# Makefile for Microsoft Visual C++ generated by freeze.py script"
+    print
+    print 'target = %s' % target
+    print 'pythonhome = %s' % vars['prefix']
+    print
+    print 'DEBUG=0 # Set to 1 to use the _d versions of Python.'
+    print '!IF $(DEBUG)'
+    print 'debug_suffix=_d'
+    print 'c_debug=/Zi /Od /DDEBUG /D_DEBUG'
+    print 'l_debug=/DEBUG'
+    print 'temp_dir=Build\\Debug'
+    print '!ELSE'
+    print 'debug_suffix='
+    print 'c_debug=/Ox'
+    print 'l_debug='
+    print 'temp_dir=Build\\Release'
+    print '!ENDIF'
+    print
+
+    print '# The following line assumes you have built Python using the standard instructions'
+    print '# Otherwise fix the following line to point to the library.'
+    print 'pythonlib = "$(pythonhome)/pcbuild/python%s$(debug_suffix).lib"' % version_suffix
+    print
+
+    # We only ever write one "entry point" symbol - either
+    # "main" or "WinMain".  Therefore, there is no need to
+    # pass a subsystem switch to the linker as it works it
+    # out all by itself.  However, the subsystem _does_ determine
+    # the file extension and additional linker flags.
+    target_link_flags = ""
+    target_ext = ".exe"
+    if subsystem_details[vars['subsystem']][2]:
+        target_link_flags = "-dll"
+        target_ext = ".dll"
+
+
+    print "# As the target uses Python%s.dll, we must use this compiler option!" % version_suffix
+    print "cdl = /MD"
+    print
+    print "all: $(target)$(debug_suffix)%s" % (target_ext)
+    print
+
+    print '$(temp_dir):'
+    print '  if not exist $(temp_dir)\. mkdir $(temp_dir)'
+    print
+
+    objects = []
+    libs = ["shell32.lib", "comdlg32.lib", "wsock32.lib", "user32.lib", "oleaut32.lib"]
+    for moddefn in moddefns:
+        print "# Module", moddefn.name
+        for file in moddefn.sourceFiles:
+            base = os.path.basename(file)
+            base, ext = os.path.splitext(base)
+            objects.append(base + ".obj")
+            print '$(temp_dir)\%s.obj: "%s"' % (base, file)
+            print "\t@$(CC) -c -nologo /Fo$* $(cdl) $(c_debug) /D BUILD_FREEZE",
+            print '"-I$(pythonhome)/Include"  "-I$(pythonhome)/PC" \\'
+            print "\t\t$(cflags) $(cdebug) $(cinclude) \\"
+            extra = moddefn.GetCompilerOptions()
+            if extra:
+                print "\t\t%s \\" % (' '.join(extra),)
+            print '\t\t"%s"' % file
+            print
+
+        # Add .lib files this module needs
+        for modlib in moddefn.GetLinkerLibs():
+            if modlib not in libs:
+                libs.append(modlib)
+
+    print "ADDN_LINK_FILES=",
+    for addn in vars['addn_link']: print '"%s"' % (addn),
+    print ; print
+
+    print "OBJS=",
+    for obj in objects: print '"$(temp_dir)\%s"' % (obj),
+    print ; print
+
+    print "LIBS=",
+    for lib in libs: print '"%s"' % (lib),
+    print ; print
+
+    print "$(target)$(debug_suffix)%s: $(temp_dir) $(OBJS)" % (target_ext)
+    print "\tlink -out:$(target)$(debug_suffix)%s %s" % (target_ext, target_link_flags),
+    print "\t$(OBJS) \\"
+    print "\t$(LIBS) \\"
+    print "\t$(ADDN_LINK_FILES) \\"
+    print "\t$(pythonlib) $(lcustom) $(l_debug)\\"
+    print "\t$(resources)"
+    print
+    print "clean:"
+    print "\t-rm -f *.obj"
+    print "\t-rm -f $(target).exe"

pykolab-0.7.tar.gz/kolabd/Makefile.in Deleted

@@ -1,521 +0,0 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = kolabd
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(kolabd_PYTHON) $(top_srcdir)/py-compile
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__py_compile = PYTHON=$(PYTHON) $(SHELL) $(py_compile)
-am__installdirs = "$(DESTDIR)$(kolabddir)"
-am__pep3147_tweak = \
-  sed -e 's|\.py$$||' -e 's|[^/]*$$|__pycache__/&.*.py|'
-py_compile = $(top_srcdir)/py-compile
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALL_LINGUAS = @ALL_LINGUAS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DATESTAMP = @DATESTAMP@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GMOFILES = @GMOFILES@
-GMSGFMT = @GMSGFMT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLLIBS = @INTLLIBS@
-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
-INTLTOOL_MERGE = @INTLTOOL_MERGE@
-INTLTOOL_PERL = @INTLTOOL_PERL@
-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
-INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
-INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
-INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
-INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGFMT_OPTS = @MSGFMT_OPTS@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POFILES = @POFILES@
-POSUB = @POSUB@
-PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
-PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
-PYTHON = @PYTHON@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RELEASE = @RELEASE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-intltool__v_merge_options_ = @intltool__v_merge_options_@
-intltool__v_merge_options_0 = @intltool__v_merge_options_0@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTRA_DIST = \
-	kolabd.sysconfig \
-	kolabd.systemd \
-	kolabd.sysvinit \
-	kolabd.tmpfiles.d.conf
-
-kolabddir = $(pythondir)/kolabd
-kolabd_PYTHON = $(wildcard *.py)
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu kolabd/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu kolabd/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-kolabdPYTHON: $(kolabd_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(kolabd_PYTHON)'; dlist=; list2=; test -n "$(kolabddir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(kolabddir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(kolabddir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(kolabddir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(kolabddir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(kolabddir)" $$dlist; \
-	else :; fi
-
-uninstall-kolabdPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(kolabd_PYTHON)'; test -n "$(kolabddir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(kolabddir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-	for dir in "$(DESTDIR)$(kolabddir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-kolabdPYTHON
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-exec-local
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-kolabdPYTHON
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
-	ctags-am distclean distclean-generic distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-exec-local install-html \
-	install-html-am install-info install-info-am \
-	install-kolabdPYTHON install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags-am uninstall uninstall-am \
-	uninstall-kolabdPYTHON
-
-
-install-exec-local:
-	mkdir -p $(DESTDIR)/$(sbindir) \
-		$(DESTDIR)/$(localstatedir)/run/kolabd
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

pykolab-0.7.tar.gz/po/bn.po Added

@@ -0,0 +1,2344 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: pykolab\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2012-08-14 11:57+0100\n"
+"PO-Revision-Date: 2012-08-11 13:02+0000\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: bn\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+
+#: ../bin/kolab_smtp_access_policy.py:206
+#, python-format
+msgid "Adding policy request to instance %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:446
+msgid "Unauthorized access not allowed"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:467
+#: ../bin/kolab_smtp_access_policy.py:657
+msgid "Could not find recipient"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:486
+#: ../bin/kolab_smtp_access_policy.py:586
+#, python-format
+msgid "Could not find envelope sender user %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:529
+#, python-format
+msgid "Obtained authenticated user details for %r: %r"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:608
+#, python-format
+msgid "%s is unauthorized to send on behalf of %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:618
+#, python-format
+msgid ""
+"User %s attempted to use envelope sender address %s without authorization"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:681
+#: ../bin/kolab_smtp_access_policy.py:692
+#, python-format
+msgid "Found user %s to be a delegate user of %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:716
+#, python-format
+msgid ""
+"Verifying authenticated sender '%(sender)s' with sasl_username "
+"'%(sasl_username)s' for recipient '%(recipient)s'"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:719
+#, python-format
+msgid ""
+"Verifying unauthenticated sender '%(sender)s' for recipient '%(recipient)s'"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:735
+#, python-format
+msgid "Reproducing verify_recipient(%s, %s) from cache"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:753
+#, python-format
+msgid "Using authentication domain %s instead of %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:763
+#, python-format
+msgid "Domain %s is a primary domain"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:771
+#, python-format
+msgid ""
+"Checking the recipient for domain %s that is not ours. This is probably a "
+"configuration error."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:786
+msgid ""
+"This recipient address is related to multiple object entries and the SMTP "
+"Access Policy can therefore not restrict message flow"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:793
+#, python-format
+msgid ""
+"Recipient address %r not found. Allowing since the MTA was configured to "
+"accept the recipient."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:820
+msgid "Invalid recipient"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:831
+msgid "Could not find this user, accepting"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:894
+#: ../bin/kolab_smtp_access_policy.py:945
+#, python-format
+msgid "Sender %s is not allowed to send to recipient %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:933
+#, python-format
+msgid "Reproducing verify_sender(%r) from cache"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:960
+msgid "Sender uses unauthorized envelope sender address"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:977
+msgid "Could not verify sender"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:984
+msgid ""
+"Verifying whether sender is allowed to send to recipient using sender policy"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:997
+#, python-format
+msgid "Result is %r"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1002
+msgid "No recipient policy restrictions exist for this sender"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1011
+msgid "Found a recipient policy to apply for this sender."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1026
+#, python-format
+msgid "Sender %s not allowed to send to recipient %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1056
+msgid "Cleaning up the cache"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1093
+#, python-format
+msgid "Operational Error in caching: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1144
+#, python-format
+msgid "Caching the policy result with timestamp %d"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1221
+#, python-format
+msgid "Returning action DEFER_IF_PERMIT: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1226
+#, python-format
+msgid "Returning action DUNNO: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1231
+#, python-format
+msgid "Returning action HOLD: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1236
+#, python-format
+msgid "Returning action PERMIT: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1241
+#, python-format
+msgid "Returning action REJECT: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1287
+msgid "Starting to loop for new request"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1294
+msgid "Timeout for policy request reading exceeded"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1300
+msgid "End of current request"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1304
+#, python-format
+msgid "Getting line: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1308
+msgid "Returning request"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1334
+msgid "Access Policy Options"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1341
+msgid "SMTP Policy request timeout."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1347
+msgid "Verify the recipient access policy."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1353
+msgid "Verify the sender access policy."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1359
+msgid "Allow unauthenticated senders."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1373
+#, python-format
+msgid "Got request instance %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1382
+#, python-format
+msgid "Request instance %s is in state %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1390
+#, python-format
+msgid "Request instance %s is not yet in DATA state"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1402
+#, python-format
+msgid "Request instance %s reached DATA state"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1420
+msgid "Sender access denied"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1422
+msgid "Recipient access denied"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1424
+msgid "No objections"
+msgstr ""
+
+#: ../conf.py:37 ../kolab.py:34 ../saslauthd.py:33
+msgid "Cannot load pykolab/logger.py:"
+msgstr ""
+
+#: ../kolabd/__init__.py:49 ../saslauthd/__init__.py:48
+#: ../wallace/__init__.py:65
+msgid "Daemon Options"
+msgstr ""
+
+#: ../kolabd/__init__.py:56 ../saslauthd/__init__.py:55
+#: ../wallace/__init__.py:72
+msgid "Fork to the background."
+msgstr ""
+
+#: ../kolabd/__init__.py:65 ../saslauthd/__init__.py:64
+#: ../wallace/__init__.py:98
+msgid "Path to the PID file to use."
+msgstr ""
+
+#: ../kolabd/__init__.py:74 ../saslauthd/__init__.py:73
+#: ../wallace/__init__.py:115
+msgid "Run as user USERNAME"
+msgstr ""
+
+#: ../kolabd/__init__.py:84 ../saslauthd/__init__.py:83
+#: ../wallace/__init__.py:89
+msgid "Run as group GROUPNAME"
+msgstr ""
+
+#: ../kolabd/__init__.py:122 ../pykolab/utils.py:151
+#: ../wallace/__init__.py:288
+#, python-format
+msgid "Group %s does not exist"
+msgstr ""
+
+#: ../kolabd/__init__.py:131 ../wallace/__init__.py:297
+#, python-format
+msgid "Switching real and effective group id to %d"
+msgstr ""
+
+#: ../kolabd/__init__.py:153 ../pykolab/utils.py:175
+#: ../wallace/__init__.py:319
+#, python-format
+msgid "User %s does not exist"
+msgstr ""
+
+#: ../kolabd/__init__.py:163 ../wallace/__init__.py:329
+#, python-format
+msgid "Switching real and effective user id to %d"
+msgstr ""
+
+#: ../kolabd/__init__.py:172 ../wallace/__init__.py:338
+msgid "Could not change real and effective uid and/or gid"
+msgstr ""
+
+#: ../kolabd/__init__.py:192 ../saslauthd/__init__.py:122
+#: ../wallace/__init__.py:358
+msgid "Interrupted by user"
+msgstr ""
+
+#: ../kolabd/__init__.py:197 ../kolabd/__init__.py:208
+#: ../wallace/__init__.py:362 ../wallace/__init__.py:372
+msgid "Traceback occurred, please report a "
+msgstr ""
+
+#: ../kolabd/__init__.py:203 ../saslauthd/__init__.py:130
+#: ../wallace/__init__.py:368
+#, python-format
+msgid "Type Error: %s"
+msgstr ""
+
+#: ../kolabd/__init__.py:223 ../pykolab/auth/ldap/__init__.py:1591
+#: ../pykolab/cli/cmd_sync.py:36
+msgid "Listing domains..."
+msgstr ""
+
+#: ../kolabd/__init__.py:256
+#, python-format
+msgid "added domains: %r, removed domains: %r"
+msgstr ""
+
+#: ../kolabd.py:31 ../setup-kolab.py:36 ../wallace.py:31
+msgid "Cannot load pykolab/constants.py:"
+msgstr ""
+
+#: ../pykolab/auth/__init__.py:94
+#, python-format
+msgid "Called for domain %r"
+msgstr ""
+
+#: ../pykolab/auth/__init__.py:107 ../pykolab/auth/__init__.py:116
+#, python-format
+msgid "Using section %s and domain %s"
+msgstr ""
+
+#: ../pykolab/auth/__init__.py:121
+#, python-format
+msgid "Connecting to Authentication backend for domain %s"
+msgstr ""
+
+#: ../pykolab/auth/__init__.py:132
+#, python-format
+msgid "Section %s has no option 'auth_mechanism'"
+msgstr ""
+
+#: ../pykolab/auth/__init__.py:139
+#, python-format
+msgid "Section %s has auth_mechanism: %r"
+msgstr ""
+
+#: ../pykolab/auth/__init__.py:148 ../pykolab/auth/__init__.py:157
+msgid "Starting LDAP..."
+msgstr ""
+
+#: ../pykolab/auth/ldap/cache.py:109
+#, python-format
+msgid "Inserting cache entry %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/cache.py:122
+#, python-format
+msgid "Updating timestamp for cache entry %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/cache.py:129
+#, python-format
+msgid "Updating result_attribute for cache entry %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:51
+msgid "Python LDAP library does not support persistent search"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:142
+#, python-format
+msgid "Attempting to authenticate user %s in realm %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:184
+#, python-format
+msgid "Binding with user_dn %s and password %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:194
+#, python-format
+msgid "Failed to authenticate as user %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:211
+msgid "Connecting to LDAP..."
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:215
+#, python-format
+msgid "Attempting to use LDAP URI %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:357
+#, python-format
+msgid "Finding recipient with filter %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:425
+#, python-format
+msgid "Finding resource with filter %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:448
+#, python-format
+msgid "Using timestamp %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:480
+#, python-format
+msgid "Applying recipient policy to %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:497
+#, python-format
+msgid "Using mail attributes: %r, with primary %r and "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:508
+#, python-format
+msgid "key %r not in entry"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:510
+#, python-format
+msgid "key %r is the prim. mail attr."
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:512
+msgid "prim. mail pol. is not empty"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:515
+#, python-format
+msgid "key %r is the sec. mail attr."
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:517
+msgid "sec. mail pol. is not empty"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:520 ../pykolab/auth/ldap/__init__.py:533
+#, python-format
+msgid "Attributes %r are not yet available for entry %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:574
+#, python-format
+msgid "No results for mail address %s found"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:585
+#, python-format
+msgid "1 result for address %s found, verifying"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:595
+#, python-format
+msgid "Too bad, primary email address %s "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:606 ../pykolab/auth/ldap/__init__.py:695
+msgid "Address assigned to us"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:661
+#, python-format
+msgid "No results for address %s found"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:672
+#, python-format
+msgid "1 result for address %s found, "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:683
+msgid "Too bad, secondary email "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:710
+msgid "Recipient policy composed the following set of secondary "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:716
+#, python-format
+msgid "Secondary mail addresses that we want is not None: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:727
+msgid "Avoiding the duplication of the primary mail "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:738
+#, python-format
+msgid "Entry is getting secondary mail addresses: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:746
+msgid "Entry did not have any secondary mail "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:772
+#, python-format
+msgid "Entry modifications list: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:792
+#, python-format
+msgid "Setting entry attribute %r to %r for %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:828
+#, python-format
+msgid "Could not update dn %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:841
+#, python-format
+msgid "Using filter %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:879
+#, python-format
+msgid "About to consider the user quota for %r (used: %r, "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:945
+msgid "Invalid bind credentials"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1229
+#, python-format
+msgid "Current changelog entry %s with %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1242
+#, python-format
+msgid "Result from recipient policy: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1385
+#, python-format
+msgid "Kolab user %s does not have a result attribute %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1527
+#, python-format
+msgid "Finding domain root dn for domain %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1615
+msgid "Authentication database DOWN"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1699 ../pykolab/auth/ldap/__init__.py:1734
+#, python-format
+msgid "Entry type: %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1822
+msgid "LDAP Search Result Data Entry:"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1838
+msgid "Entry Change Notification attributes:"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1843
+#, python-format
+msgid "Change Type: %r (%r)"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1851
+#, python-format
+msgid "Previous DN: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1906
+#, python-format
+msgid "Object %s searched no longer exists"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1916
+#, python-format
+msgid "%d results..."
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2014
+#, python-format
+msgid "Searching with filter %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2058
+#, python-format
+msgid "Checking for support for %s on %s"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_domain.py:36 ../pykolab/cli/cmd_create_mailbox.py:36
+#: ../pykolab/cli/cmd_export_mailbox.py:33
+#: ../pykolab/cli/cmd_list_mailboxes.py:39
+#: ../pykolab/cli/cmd_list_user_subscriptions.py:35
+msgid "CLI Options"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_domain.py:42
+msgid "Add domain as alias for DOMAIN"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_domain.py:47
+msgid "Add a new domain or domain alias."
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_domain.py:55
+msgid "Could not find credentials with sufficient permissions"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_domain.py:80 ../pykolab/wap_client/__init__.py:113
+msgid "Invalid parent domain"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_domain.py:86
+msgid "Domain name"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_user_subscription.py:37
+msgid "Subscribe a user to a folder."
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_user_subscription.py:47
+#: ../pykolab/cli/cmd_add_user_subscription.py:51
+#: ../pykolab/cli/cmd_remove_user_subscription.py:47
+#: ../pykolab/cli/cmd_remove_user_subscription.py:51
+msgid "Folder pattern"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_user_subscription.py:50
+#: ../pykolab/cli/cmd_list_user_subscriptions.py:56
+#: ../pykolab/cli/cmd_remove_user_subscription.py:50
+msgid "User ID"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_user_subscription.py:72
+#: ../pykolab/cli/cmd_remove_user_subscription.py:72
+#, python-format
+msgid "Cannot subscribe user to folder %r:"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_user_subscription.py:73
+#: ../pykolab/cli/cmd_remove_user_subscription.py:73
+msgid "No such folder"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_user_subscription.py:86
+#, python-format
+msgid "Successfully subscribed user %s to the following folders:"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_user_subscription.py:92
+#, python-format
+msgid "User %s not subscribed to any folders."
+msgstr ""
+
+#: ../pykolab/cli/cmd_create_mailbox.py:41
+msgid "Set metadata for folder to ANNOTATION=VALUE"
+msgstr ""
+
+#: ../pykolab/cli/cmd_create_mailbox.py:50
+msgid "Invalid argument"
+msgstr ""
+
+#: ../pykolab/cli/cmd_create_mailbox.py:58
+msgid "Invalid argument for metadata"
+msgstr ""
+
+#: ../pykolab/cli/cmd_delete_mailbox_acl.py:45
+#: ../pykolab/cli/cmd_delete_mailbox_acl.py:49
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:50
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:55
+msgid "ACI Subject"
+msgstr ""
+
+#: ../pykolab/cli/cmd_delete_mailbox_acl.py:48
+#: ../pykolab/cli/cmd_list_mailbox_acls.py:41
+#: ../pykolab/cli/cmd_list_mailbox_metadata.py:41
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:54
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:54
+msgid "Folder name"
+msgstr ""
+
+#: ../pykolab/cli/cmd_delete_mailbox_acl.py:60
+#: ../pykolab/cli/cmd_list_mailbox_acls.py:52
+#: ../pykolab/cli/cmd_list_mailbox_metadata.py:52
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:67
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:67
+#, python-format
+msgid "No such folder %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_delete_mailbox.py:46
+msgid "No mailbox specified"
+msgstr ""
+
+#: ../pykolab/cli/cmd_export_mailbox.py:38
+msgid "All folders this user has access to"
+msgstr ""
+
+#: ../pykolab/cli/cmd_export_mailbox.py:108
+#, python-format
+msgid "%s is not a directory"
+msgstr ""
+
+#: ../pykolab/cli/cmd_export_mailbox.py:118
+#, python-format
+msgid "ZIP file at %s.zip"
+msgstr ""
+
+#: ../pykolab/cli/cmd_export_mailbox.py:120
+#, python-format
+msgid "No directories found for user %s"
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_mailboxes.py:44
+msgid "Display raw IMAP UTF-7 folder names"
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_mailboxes.py:75
+#, python-format
+msgid "Appending folder search for %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_user_subscriptions.py:40
+msgid "List unsubscribed folders"
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_user_subscriptions.py:43
+msgid "List the folders a user is subscribed to."
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_user_subscriptions.py:88
+#, python-format
+msgid "No unsubscribed folders for user %s"
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_mailaddress.py:49
+msgid "Invalid or unqualified email address."
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_mailaddress.py:57
+#, python-format
+msgid "No recipient found for email address %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_mailaddress.py:60
+#, python-format
+msgid "Found the following recipient(s): %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_mailaddress.py:66
+#, python-format
+msgid "Using the following mail attributes: %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_mailaddress.py:90
+msgid "Found the following recipients:"
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_user_subscription.py:37
+msgid "Unsubscribe a user from a folder."
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_user_subscription.py:86
+#, python-format
+msgid "Successfully unsubscribed user %s from the following folders:"
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_user_subscription.py:92
+#, python-format
+msgid "User %s not be unsubscribed from any folders."
+msgstr ""
+
+#: ../pykolab/cli/cmd_rename_mailbox.py:48
+msgid "No target mailbox name specified"
+msgstr ""
+
+#: ../pykolab/cli/cmd_rename_mailbox.py:50
+msgid "No source mailbox name specified"
+msgstr ""
+
+#: ../pykolab/cli/cmd_rename_mailbox.py:62
+#, python-format
+msgid "Source folder %r does not exist"
+msgstr ""
+
+#: ../pykolab/cli/cmd_rename_mailbox.py:66
+#, python-format
+msgid "Target folder %r already exists"
+msgstr ""
+
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:47
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:51
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:56
+msgid "ACI Permissions"
+msgstr ""
+
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:47
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:51
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:56
+msgid "Metadata value"
+msgstr ""
+
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:50
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:55
+msgid "Metadata path"
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync.py:41
+#, python-format
+msgid "Found %d domains in %d seconds"
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync.py:51
+#, python-format
+msgid "Running for domain %s"
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync.py:57
+#, python-format
+msgid "Synchronizing users for %s took %d seconds"
+msgstr ""
+
+#: ../pykolab/cli/cmd_undelete_mailbox.py:33
+msgid "Recover mailboxes previously deleted."
+msgstr ""
+
+#. This is a nested command
+#. This is a nested component
+#: ../pykolab/cli/commands.py:98 ../pykolab/setup/components.py:90
+#, python-format
+msgid "Command Group: %s"
+msgstr ""
+
+#: ../pykolab/cli/commands.py:109 ../pykolab/cli/commands.py:114
+msgid "No such command."
+msgstr ""
+
+#: ../pykolab/cli/commands.py:165 ../pykolab/setup/components.py:231
+#, python-format
+msgid "Command '%s' already registered"
+msgstr ""
+
+#: ../pykolab/cli/commands.py:190 ../pykolab/setup/components.py:257
+#: ../wallace/modules.py:338
+#, python-format
+msgid "Alias for %s"
+msgstr ""
+
+#: ../pykolab/cli/commands.py:198 ../pykolab/setup/components.py:265
+msgid "Not yet implemented"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_examine_command_issue.py:40
+msgid "Unspecified command issue identifier"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_examine_command_issue.py:50
+msgid "Invalid command issue identifier"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_examine_command_issue.py:60
+#: ../pykolab/cli/telemetry/cmd_examine_session.py:65
+msgid "Invalid session identifier"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_examine_command_issue.py:75
+#: ../pykolab/cli/telemetry/cmd_examine_session.py:100
+#, python-format
+msgid "Session by %s on server %s"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_examine_session.py:43
+msgid "Unspecified session identifier"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_list_sessions.py:35
+msgid "List Options"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_list_sessions.py:40
+msgid "Display sessions since ..."
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_list_sessions.py:58
+#, python-format
+msgid "Session for user %s started at %s with ID %s"
+msgstr ""
+
+#: ../pykolab/conf/entitlement.py:57 ../pykolab/conf/entitlement.py:80
+#: ../pykolab/conf/entitlement.py:98 ../pykolab/conf/entitlement.py:116
+#: ../pykolab/conf/entitlement.py:230 ../pykolab/conf/entitlement.py:246
+#: ../pykolab/conf/entitlement.py:262
+msgid "Invalid entitlement verification "
+msgstr ""
+
+#: ../pykolab/conf/entitlement.py:120 ../pykolab/conf/entitlement.py:123
+msgid "Invalid entitlement certificate"
+msgstr ""
+
+#: ../pykolab/conf/entitlement.py:132
+#, python-format
+msgid "Parsing entitlement file %s"
+msgstr ""
+
+#: ../pykolab/conf/entitlement.py:141
+#, python-format
+msgid "License file %s not readable!"
+msgstr ""
+
+#: ../pykolab/conf/entitlement.py:147
+msgid "No entitlement directory found"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:87
+#, python-format
+msgid "Setting %s to %r (from defaults)"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:106
+#, python-format
+msgid "Setting %s to %r (from CLI, verified)"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:109
+#, python-format
+msgid "Setting %s to %r (from CLI, not checked)"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:150 ../pykolab/conf/__init__.py:207
+#, python-format
+msgid "Setting %s_%s to '****' (from configuration file)"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:152 ../pykolab/conf/__init__.py:209
+#, python-format
+msgid "Setting %s_%s to %r (from configuration file)"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:162
+msgid "Setting options from configuration file"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:223
+#, python-format
+msgid "Configuration file %s not readable"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:226
+#, python-format
+msgid "Reading configuration file %s"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:230
+#, python-format
+msgid "Invalid configuration file %s"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:233
+#, python-format
+msgid "No master configuration section [kolab] in configuration file %s"
+msgstr ""
+
+#. #
+#. # Runtime Options
+#. #
+#: ../pykolab/conf/__init__.py:267
+msgid "Runtime Options"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:272
+msgid "Configuration file to use"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:278
+msgid "Set the debugging "
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:286
+msgid "Set the logging level. "
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:294
+msgid "Log file to use"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:300
+msgid "Be quiet."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:306
+msgid "Answer yes to all questions."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:328
+msgid "No command supplied"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:411
+msgid "Insufficient options. Need section, key and value -in that order."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:414
+#, python-format
+msgid "No section '%s' exists."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:445
+#, python-format
+msgid "Setting %s to %r (from the default values for CLI options)"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:514
+#, python-format
+msgid "Could not execute configuration function: %s"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:522
+#, python-format
+msgid "Option %s/%s does not exist in config file %s, pulling from defaults"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:530 ../pykolab/conf/__init__.py:533
+msgid "Option does not exist in defaults."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:543
+#, python-format
+msgid "Configuration file %s not readable."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:546
+#, python-format
+msgid "Configuration file %s does not exist."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:551
+msgid ""
+"WARNING: A negative debug level value does not make this program be any more "
+"silent."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:557
+msgid "This program has 9 levels of verbosity. Using the maximum of 9."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:565 ../pykolab/conf/__init__.py:571
+msgid "Cannot start SASL authentication daemon"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:582
+msgid "No imaplib library found."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:592
+msgid "No LMTP class found in the smtplib library."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:602
+msgid "No SMTP class found in the smtplib library."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:616
+#, python-format
+msgid "Found you specified a specific set of items to test: %s"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:624
+#, python-format
+msgid "Selectively selecting: %s"
+msgstr ""
+
+#: ../pykolab/constants.py.in:40
+msgid ""
+"PyKolab is a Kolab Systems product. For more information about Kolab or "
+"PyKolab, visit http://www.kolabsys.com"
+msgstr ""
+
+#: ../pykolab/constants.py.in:53
+msgid "WARNING"
+msgstr ""
+
+#: ../pykolab/constants.py.in:53
+msgid ""
+"The Fully Qualified Domain Name or FQDN for this system is incorrect. "
+"Falling back to 'localdomain'."
+msgstr ""
+
+#: ../pykolab/constants.py.in:72
+msgid "389 Directory Server or Red Hat Directory Server"
+msgstr ""
+
+#: ../pykolab/constants.py.in:76 ../pykolab/constants.py.in:80
+msgid "OpenLDAP or compatible"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:79
+#, python-format
+msgid "Could not connect to Cyrus IMAP server %r"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:134
+#, python-format
+msgid "Continuing with separator: %r"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:139
+msgid "Detected we are running in a Murder topology"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:143
+msgid "This system is not part of a murder topology"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:164
+#, python-format
+msgid "Checking actual backend server for folder %s through annotations"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:179
+#, python-format
+msgid "Could not get the annotations after %s tries."
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:183
+#, python-format
+msgid "No annotations for %s: %r"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:190
+#, python-format
+msgid "Server for INBOX folder %s is %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:202
+#, python-format
+msgid "Setting quota for folder %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:206
+#, python-format
+msgid "Could not set quota for mailfolder %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:215
+#, python-format
+msgid "Moving INBOX folder %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:227
+#, python-format
+msgid "Setting annotation %s on folder %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:234
+#, python-format
+msgid "Could not set annotation %r on mail folder %r: %r"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:238
+#, python-format
+msgid "Transferring folder %s from %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:298
+#, python-format
+msgid "Undeleting %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:45
+#, python-format
+msgid "Cleaning up ACL entries for %s across all folders"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:60
+#, python-format
+msgid "Cleaning up ACL entries referring to identifier %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:69
+#, python-format
+msgid "Iterating over %d folders"
+msgstr ""
+
+#. Set the ACL to '' (effectively deleting the ACL entry)
+#: ../pykolab/imap/__init__.py:82
+#, python-format
+msgid "Removing acl %r for subject %r from folder %r"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:143
+#, python-format
+msgid "Logging on to Cyrus IMAP server %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:152
+#, python-format
+msgid "Logging on to Dovecot IMAP server %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:161
+#, python-format
+msgid "Logging on to generic IMAP server %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:179
+#, python-format
+msgid "Reusing existing IMAP server connection to %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:181
+#, python-format
+msgid "Reconnecting to IMAP server %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:197
+msgid "Called imap.disconnect() on a server that "
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:213
+#, python-format
+msgid "%r has no attribute %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:286
+msgid "Private annotations need to be set using the appropriate user account."
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:319 ../pykolab/imap/__init__.py:354
+#, python-format
+msgid "Creating new shared folder %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:376
+#, python-format
+msgid "Creating new mailbox for user %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:405
+#, python-format
+msgid "Creating additional folders for user %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:429
+#, python-format
+msgid "Mailbox already exists: %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:472
+msgid "Subscribing user to the additional folders"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:532 ../pykolab/imap/__init__.py:606
+#, python-format
+msgid "Renaming INBOX from %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:536
+#, python-format
+msgid "Could not rename INBOX folder %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:538 ../pykolab/imap/__init__.py:610
+#, python-format
+msgid "Moving INBOX folder %s won't succeed as target folder %s already exists"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:548
+#, python-format
+msgid "Looking for folder '%s', we found folders: %r"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:571
+#, python-format
+msgid "Setting ACL rights %s for subject %s on folder "
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:582
+#, python-format
+msgid "Removing ACL rights %s for subject %s on folder "
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:603
+#, python-format
+msgid "Found old INBOX folder %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:612
+#, python-format
+msgid "Did not find old folder user/%s to rename"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:614
+msgid "Value for user is not a dictionary"
+msgstr ""
+
+#. TODO: Go in fact correct the quota.
+#: ../pykolab/imap/__init__.py:674
+#, python-format
+msgid "Cannot get current IMAP quota for folder %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:687
+#, python-format
+msgid "Quota for %s currently is %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:693
+#, python-format
+msgid "Adjusting authentication database quota for folder %s to %d"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:698
+#, python-format
+msgid "Correcting quota for %s to %s (currently %s)"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:775
+#, python-format
+msgid "Checking folder: %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:780
+#, python-format
+msgid "Folder has no corresponding user (1): %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:783
+#, python-format
+msgid "Folder has no corresponding user (2): %s"
+msgstr ""
+
+#. We got user identifier only
+#: ../pykolab/imap/__init__.py:798
+msgid "Please don't give us just a user identifier"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:801
+#, python-format
+msgid "Deleting folder %s"
+msgstr ""
+
+#: ../pykolab/__init__.py:50
+msgid "Returning thread local configuration"
+msgstr ""
+
+#: ../pykolab/logger.py:105
+#, python-format
+msgid "Could not change the ownership of log file %s"
+msgstr ""
+
+#: ../pykolab/logger.py:121
+#, python-format
+msgid "Cannot log to file %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/defaultfolders/__init__.py:47
+#, python-format
+msgid "Plugin %s called without required keyword %s."
+msgstr ""
+
+#: ../pykolab/plugins/defaultfolders/__init__.py:53
+msgid "Could not parse additional_folders"
+msgstr ""
+
+#: ../pykolab/plugins/dynamicquota/__init__.py:58
+#, python-format
+msgid "No keyword %s passed to set_user_folder_quota"
+msgstr ""
+
+#: ../pykolab/plugins/dynamicquota/__init__.py:70
+#, python-format
+msgid "Quota '%s' not an integer!"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:70
+#, python-format
+msgid "ImportError for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:74
+#, python-format
+msgid "RuntimeError for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:78
+#, python-format
+msgid "Plugin %s failed to load (%s: %s)"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:116 ../pykolab/plugins/__init__.py:118
+#, python-format
+msgid "Cannot set defaults for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:120
+#, python-format
+msgid "Cannot set defaults for plugin %s: Unknown Error"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:123
+#, python-format
+msgid "Not setting defaults for plugin %s: No function 'set_defaults()'"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:142
+#, python-format
+msgid "Cannot set runtime for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:144
+#, python-format
+msgid "Not setting runtime for plugin %s: No function 'set_runtime()'"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:163 ../pykolab/plugins/__init__.py:165
+#, python-format
+msgid "Cannot add options for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:167
+#, python-format
+msgid "Not adding options for plugin %s: No function 'add_options()'"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:187
+#, python-format
+msgid "Cannot check options for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:189
+#, python-format
+msgid "Not checking options for plugin %s: No function 'check_options()'"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:227
+#, python-format
+msgid "Executing hook %s for plugin %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:231 ../pykolab/plugins/__init__.py:233
+#, python-format
+msgid "Cannot execute hook %s for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/recipientpolicy/__init__.py:79
+msgid "Attribute substitution for 'mail' failed in Recipient Policy"
+msgstr ""
+
+#: ../pykolab/plugins/recipientpolicy/__init__.py:115
+msgid "Could not parse the alternative mail routines"
+msgstr ""
+
+#: ../pykolab/plugins/recipientpolicy/__init__.py:127
+#: ../pykolab/plugins/recipientpolicy/__init__.py:137
+msgid ""
+"Attribute substitution for 'alternative_mail' failed in Recipient Policy"
+msgstr ""
+
+#: ../pykolab/setup/components.py:58
+msgid "Display this help."
+msgstr ""
+
+#: ../pykolab/setup/components.py:149
+msgid "No component selected, continuing for all components"
+msgstr ""
+
+#: ../pykolab/setup/components.py:187 ../pykolab/setup/components.py:192
+msgid "No such component."
+msgstr ""
+
+#: ../pykolab/setup/setup_freebusy.py:46
+msgid "Setup Free/Busy."
+msgstr ""
+
+#: ../pykolab/setup/setup_freebusy.py:50
+msgid "Free/Busy is not installed on this system"
+msgstr ""
+
+#: ../pykolab/setup/setup_freebusy.py:55
+msgid ""
+"\n"
+"                        Please supply the MySQL password for the "
+"'roundcube'\n"
+"                        user. You have supplied this password earlier, and "
+"it is\n"
+"                        available from the database URI setting in\n"
+"                        /etc/roundcubemail/db.inc.php.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_freebusy.py:64
+#: ../pykolab/setup/setup_roundcube.py:56
+msgid "MySQL roundcube password"
+msgstr ""
+
+#: ../pykolab/setup/setup_freebusy.py:92
+#: ../pykolab/setup/setup_roundcube.py:116 ../pykolab/setup/setup_zpush.py:71
+#, python-format
+msgid "Using template file %r"
+msgstr ""
+
+#: ../pykolab/setup/setup_freebusy.py:99
+#: ../pykolab/setup/setup_roundcube.py:123 ../pykolab/setup/setup_zpush.py:78
+#, python-format
+msgid "Successfully compiled template %r, writing out to %r"
+msgstr ""
+
+#: ../pykolab/setup/setup_freebusy.py:119 ../pykolab/setup/setup_imap.py:143
+#: ../pykolab/setup/setup_ldap.py:288 ../pykolab/setup/setup_ldap.py:521
+#: ../pykolab/setup/setup_mta.py:309 ../pykolab/setup/setup_mysql.py:49
+#: ../pykolab/setup/setup_roundcube.py:191
+#: ../pykolab/setup/setup_syncroton.py:66 ../pykolab/setup/setup_zpush.py:98
+msgid "Could not start and configure to start on boot, the "
+msgstr ""
+
+#: ../pykolab/setup/setup_imap.py:44
+msgid "Setup IMAP."
+msgstr ""
+
+#: ../pykolab/setup/setup_imap.py:88 ../pykolab/setup/setup_imap.py:113
+msgid "Could not write out Cyrus IMAP configuration file /etc/imapd.conf"
+msgstr ""
+
+#: ../pykolab/setup/setup_kolabd.py:43
+msgid "Setup the Kolab daemon."
+msgstr ""
+
+#: ../pykolab/setup/setup_kolabd.py:51
+#, python-format
+msgid ""
+"\n"
+"                            Copying the configuration section for 'example."
+"org' over to\n"
+"                            a section applicable to your domain '%s'.\n"
+"                        "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:43
+msgid "LDAP Options"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:50
+msgid "Specify FQDN (overriding defaults)."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:58
+msgid "Allow anonymous binds (default: no)."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:62
+msgid "Setup LDAP."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:74
+msgid ""
+"\n"
+"                        Please supply a password for the LDAP administrator "
+"user\n"
+"                        'admin', used to login to the graphical console of "
+"389\n"
+"                        Directory server.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:82
+msgid "Administrator password"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:89
+msgid ""
+"\n"
+"                        Please supply a password for the LDAP Directory "
+"Manager\n"
+"                        user, which is the administrator user you will be "
+"using\n"
+"                        to at least initially log in to the Web Admin, and "
+"that\n"
+"                        Kolab uses to perform administrative tasks.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:98
+msgid "Directory Manager password"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:105
+msgid ""
+"\n"
+"                        Please choose the system user and group the service\n"
+"                        should use to run under. These should be existing,\n"
+"                        unprivileged, local system POSIX accounts with no "
+"shell.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:112
+msgid "User"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:113
+msgid "Group"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:143
+msgid ""
+"\n"
+"                        This setup procedure plans to set up Kolab Groupware "
+"for\n"
+"                        the following domain name space. This domain name "
+"is\n"
+"                        obtained from the reverse DNS entry on your network\n"
+"                        interface. Please confirm this is the appropriate "
+"domain\n"
+"                        name space.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:157
+msgid "Domain name to use"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:162 ../pykolab/setup/setup_ldap.py:187
+msgid ""
+"\n"
+"                                    Invalid input. Please try again.\n"
+"                                "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:171
+msgid ""
+"\n"
+"                        The standard root dn we composed for you follows. "
+"Please\n"
+"                        confirm this is the root dn you wish to use.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:182
+msgid "Root DN to use"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:234
+msgid ""
+"\n"
+"                    Setup is now going to set up the 389 Directory Server. "
+"This\n"
+"                    may take a little while (during which period there is "
+"no\n"
+"                    output and no progress indication).\n"
+"                "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:241
+msgid "Setting up 389 Directory Server"
+msgstr ""
+
+#. TODO: Get the return code and display output if not successful.
+#: ../pykolab/setup/setup_ldap.py:253
+msgid "Setup DS stdout:"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:256
+msgid "Setup DS stderr:"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:279 ../pykolab/setup/setup_mysql.py:129
+msgid "Could not find the Kolab schema file"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:293
+msgid ""
+"\n"
+"                        Please supply a Cyrus Administrator password. This\n"
+"                        password is used by Kolab to execute administrative\n"
+"                        tasks in Cyrus IMAP. You may also need the password\n"
+"                        yourself to troubleshoot Cyrus IMAP and/or perform\n"
+"                        other administrative tasks against Cyrus IMAP "
+"directly.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:303
+msgid "Cyrus Administrator password"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:310
+msgid ""
+"\n"
+"                        Please supply a Kolab Service account password. "
+"This\n"
+"                        account is used by various services such as "
+"Postfix,\n"
+"                        and Roundcube, as anonymous binds to the LDAP "
+"server\n"
+"                        will not be allowed.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:319
+msgid "Kolab Service password"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:329
+msgid "Writing out configuration to kolab.conf"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:343
+msgid "Inserting service users into LDAP."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:417
+msgid "Writing out cn=kolab,cn=config"
+msgstr ""
+
+#. TODO: Add kolab-admin role
+#. TODO: Assign kolab-admin admin ACLs
+#: ../pykolab/setup/setup_ldap.py:441
+#, python-format
+msgid "Adding domain %s to list of domains for this deployment"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:457
+msgid "Disabling anonymous binds"
+msgstr ""
+
+#. TODO: Ensure the uid attribute is unique
+#. TODO^2: Consider renaming the general "attribute uniqueness to "uid attribute uniqueness"
+#: ../pykolab/setup/setup_ldap.py:465
+msgid "Enabling attribute uniqueness plugin"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:471
+msgid "Enabling referential integrity plugin"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:477
+msgid "Enabling and configuring account policy plugin"
+msgstr ""
+
+#. TODO: Add kolab-admin role
+#: ../pykolab/setup/setup_ldap.py:492
+msgid "Adding the kolab-admin role"
+msgstr ""
+
+#. TODO: User writeable attributes on root_dn
+#: ../pykolab/setup/setup_ldap.py:503
+#, python-format
+msgid "Setting access control to %s"
+msgstr ""
+
+#: ../pykolab/setup/setup_mta.py:40
+msgid "Setup MTA."
+msgstr ""
+
+#: ../pykolab/setup/setup_mta.py:224 ../pykolab/setup/setup_php.py:80
+#, python-format
+msgid "Setting key %r to %r"
+msgstr ""
+
+#: ../pykolab/setup/setup_mta.py:252
+msgid "Could not write out Postfix configuration file /etc/postfix/master.cf"
+msgstr ""
+
+#: ../pykolab/setup/setup_mta.py:287
+msgid "Could not write out Amavis configuration file /etc/amavisd/amavisd.conf"
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:39
+msgid "Setup MySQL."
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:53
+msgid ""
+"\n"
+"                    Please supply a root password for MySQL. This password "
+"will\n"
+"                    be the administrative user for this MySQL server, and "
+"it\n"
+"                    should be kept a secret. After this setup process has\n"
+"                    completed, Kolab is going to discard and forget about "
+"this\n"
+"                    password, but you will need it for administrative tasks "
+"in\n"
+"                    MySQL.\n"
+"                "
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:64
+msgid "MySQL root password"
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:103
+msgid ""
+"\n"
+"                        Please supply a password for the MySQL user "
+"'kolab'.\n"
+"                        This password will be used by Kolab services, such "
+"as\n"
+"                        the Web Administration Panel.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:111
+msgid "MySQL kolab password"
+msgstr ""
+
+#: ../pykolab/setup/setup_php.py:42
+msgid "PHP Options"
+msgstr ""
+
+#: ../pykolab/setup/setup_php.py:49
+msgid "Specify the timezone for PHP."
+msgstr ""
+
+#: ../pykolab/setup/setup_php.py:53
+msgid "Setup PHP."
+msgstr ""
+
+#: ../pykolab/setup/setup_php.py:58
+msgid ""
+"\n"
+"                        Please supply the timezone PHP should be using.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_php.py:64
+msgid "Timezone ID"
+msgstr ""
+
+#: ../pykolab/setup/setup_roundcube.py:44
+msgid "Setup Roundcube."
+msgstr ""
+
+#: ../pykolab/setup/setup_roundcube.py:48
+msgid ""
+"\n"
+"                    Please supply a password for the MySQL user "
+"'roundcube'.\n"
+"                    This password will be used by the Roundcube webmail\n"
+"                    interface.\n"
+"                "
+msgstr ""
+
+#: ../pykolab/setup/setup_syncroton.py:40
+msgid "Setup Syncroton."
+msgstr ""
+
+#: ../pykolab/setup/setup_zpush.py:41
+msgid "Setup zpush."
+msgstr ""
+
+#: ../pykolab/setup/setup_zpush.py:45
+msgid "Z-Push is not installed on this system"
+msgstr ""
+
+#. start_max = (int)(time.time())
+#: ../pykolab/telemetry.py:588
+#, python-format
+msgid "Expiring sessions that started before or on %d"
+msgstr ""
+
+#: ../pykolab/telemetry.py:601
+#, python-format
+msgid "Expiring session ID: %d"
+msgstr ""
+
+#: ../pykolab/telemetry.py:620
+#, python-format
+msgid "Session with ID %d expired from database"
+msgstr ""
+
+#: ../pykolab/telemetry.py:646
+#, python-format
+msgid "Operational Error in telemetry database: %s"
+msgstr ""
+
+#: ../pykolab/telemetry.py:652
+msgid "No database available"
+msgstr ""
+
+#: ../pykolab/utils.py:57 ../pykolab/utils.py:59
+#, python-format
+msgid "Confirm %s: "
+msgstr ""
+
+#: ../pykolab/utils.py:62
+msgid "Incorrect confirmation. "
+msgstr ""
+
+#: ../pykolab/utils.py:67 ../pykolab/utils.py:72
+#, python-format
+msgid "%s: "
+msgstr ""
+
+#: ../pykolab/utils.py:69 ../pykolab/utils.py:74
+#, python-format
+msgid "%s [%s]: "
+msgstr ""
+
+#: ../pykolab/utils.py:119
+msgid "Please answer 'yes' or 'no'."
+msgstr ""
+
+#: ../pykolab/utils.py:185
+#, python-format
+msgid "Could not change the permissions on %s"
+msgstr ""
+
+#: ../pykolab/wap_client/__init__.py:257
+#, python-format
+msgid "Requesting %r with params %r"
+msgstr ""
+
+#: ../pykolab/wap_client/__init__.py:263
+#, python-format
+msgid "Got response: %r"
+msgstr ""
+
+#. Some data is not JSON
+#: ../pykolab/wap_client/__init__.py:268
+msgid "Response data is not JSON"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:79 ../pykolab/xml/attendee.py:99
+msgid "Not a valid attendee"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:84
+msgid "No valid delegator references found"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:104
+msgid "No valid delegatee references found"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:140
+#, python-format
+msgid "Invalid cutype %r"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:151
+#, python-format
+msgid "Invalid participant status %r"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:159
+#, python-format
+msgid "Invalid role %r"
+msgstr ""
+
+#: ../pykolab/xml/event.py:172
+#, python-format
+msgid "No attendee with email or name %r"
+msgstr ""
+
+#: ../pykolab/xml/event.py:180
+#, python-format
+msgid "Invalid argument value attendee %r, must be basestring or Attendee"
+msgstr ""
+
+#: ../pykolab/xml/event.py:186
+#, python-format
+msgid "No attendee with email %r"
+msgstr ""
+
+#: ../pykolab/xml/event.py:192
+#, python-format
+msgid "No attendee with name %r"
+msgstr ""
+
+#: ../pykolab/xml/event.py:338
+msgid "Invalid participant status"
+msgstr ""
+
+#: ../pykolab/xml/event.py:538
+msgid "Event end needs datetime.date or datetime.datetime instance"
+msgstr ""
+
+#: ../pykolab/xml/event.py:654
+#, python-format
+msgid "Invalid status %r"
+msgstr ""
+
+#: ../pykolab/xml/event.py:675 ../pykolab/xml/event.py:725
+msgid "Event start needs datetime.date or datetime.datetime instance"
+msgstr ""
+
+#: ../pykolab/xml/event.py:761
+#, python-format
+msgid "Invalid status set: %r"
+msgstr ""
+
+#: ../pykolab/xml/event.py:879
+msgid "No sender specified"
+msgstr ""
+
+#: ../saslauthd/__init__.py:126 ../saslauthd/__init__.py:134
+msgid "Traceback occurred, please report a bug at http://bugzilla.kolabsys.com"
+msgstr ""
+
+#: ../wallace/__init__.py:61
+#, python-format
+msgid "Worker process %s initializing"
+msgstr ""
+
+#: ../wallace/__init__.py:80
+msgid "Bind address for Wallace."
+msgstr ""
+
+#: ../wallace/__init__.py:106
+msgid "Port that Wallace is supposed to use."
+msgstr ""
+
+#: ../wallace/__init__.py:157
+#, python-format
+msgid "Could not bind to socket on port %d on bind "
+msgstr ""
+
+#: ../wallace/__init__.py:169
+msgid "Could not shut down socket"
+msgstr ""
+
+#: ../wallace/__init__.py:226
+msgid "Accepted connection"
+msgstr ""
+
+#: ../wallace/__init__.py:389
+#, python-format
+msgid "Could not write pid file %s"
+msgstr ""
+
+#: ../wallace/module_optout.py:61 ../wallace/module_resources.py:94
+#, python-format
+msgid "Issuing callback after processing to stage %s"
+msgstr ""
+
+#: ../wallace/module_optout.py:62 ../wallace/module_resources.py:100
+#, python-format
+msgid "Testing cb_action_%s()"
+msgstr ""
+
+#: ../wallace/module_optout.py:64 ../wallace/module_resources.py:103
+#, python-format
+msgid "Attempting to execute cb_action_%s()"
+msgstr ""
+
+#. modules.next_module('optout')
+#: ../wallace/module_optout.py:70
+#, python-format
+msgid "Consulting opt-out service for %r, %r"
+msgstr ""
+
+#: ../wallace/module_optout.py:96
+#, python-format
+msgid "Running opt-out consult from envelope sender '%s "
+msgstr ""
+
+#: ../wallace/module_optout.py:160
+#, python-format
+msgid "Attempting to execute cb_action_%s(%r, %r)"
+msgstr ""
+
+#: ../wallace/module_optout.py:181
+#, python-format
+msgid "Could not send request to optout_url %s"
+msgstr ""
+
+#: ../wallace/module_resources.py:81
+#, python-format
+msgid "Resource Management called for %r, %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:139
+msgid "Message is not an iTip message or does not contain any "
+msgstr ""
+
+#: ../wallace/module_resources.py:147
+msgid "iTip events attached to this message contain the "
+msgstr ""
+
+#: ../wallace/module_resources.py:174
+msgid "Not an iTip message, but sent to resource nonetheless. Reject message"
+msgstr ""
+
+#: ../wallace/module_resources.py:182
+msgid "No itips, no resources, pass along"
+msgstr ""
+
+#: ../wallace/module_resources.py:186
+msgid "iTips, but no resources, pass along"
+msgstr ""
+
+#: ../wallace/module_resources.py:218
+#, python-format
+msgid "Resources: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:236
+#, python-format
+msgid "Checking events in resource folder %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:243
+#, python-format
+msgid "Mailbox for resource %r doesn't exist"
+msgstr ""
+
+#: ../wallace/module_resources.py:256
+#, python-format
+msgid "Fetching message UID %r from folder %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:295
+#, python-format
+msgid "Event %r conflicts with event "
+msgstr ""
+
+#: ../wallace/module_resources.py:308
+#, python-format
+msgid "start: %r, end: %r, total: %r, messages: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:315
+#, python-format
+msgid "Polling for resource %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:319
+#, python-format
+msgid "Resource %r has been popped from the list"
+msgstr ""
+
+#: ../wallace/module_resources.py:326
+msgid "Resource is a collection"
+msgstr ""
+
+#: ../wallace/module_resources.py:374 ../wallace/module_resources.py:424
+#, python-format
+msgid "Adding event to %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:473
+#, python-format
+msgid "Method %r not really interesting for us."
+msgstr ""
+
+#: ../wallace/module_resources.py:481
+#, python-format
+msgid "Raw iTip payload: %s"
+msgstr ""
+
+#: ../wallace/module_resources.py:491
+msgid "Could not read iTip from message."
+msgstr ""
+
+#: ../wallace/module_resources.py:513
+msgid "iTip event without a start"
+msgstr ""
+
+#. end if c.name == "VEVENT"
+#. end for c in cal.walk()
+#. end if part.get_content_type() == "text/calendar"
+#. end for part in message.walk()
+#. if message.is_multipart()
+#: ../wallace/module_resources.py:543
+msgid "Message is not an iTip message (non-multipart message)"
+msgstr ""
+
+#: ../wallace/module_resources.py:564
+#, python-format
+msgid "Checking if email address %r belongs to a resource (collection)"
+msgstr ""
+
+#: ../wallace/module_resources.py:575 ../wallace/module_resources.py:649
+#: ../wallace/module_resources.py:699
+#, python-format
+msgid "No resource (collection) records found for %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:583 ../wallace/module_resources.py:657
+#: ../wallace/module_resources.py:707
+#, python-format
+msgid "Resource record(s): %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:589 ../wallace/module_resources.py:664
+#: ../wallace/module_resources.py:714
+#, python-format
+msgid "Resource record: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:608
+#, python-format
+msgid "Raw itip_events: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:616
+#, python-format
+msgid "Raw set of attendees: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:624
+#, python-format
+msgid "Raw set of resources: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:638
+#, python-format
+msgid "Checking if attendee %r is a resource (collection)"
+msgstr ""
+
+#: ../wallace/module_resources.py:671 ../wallace/module_resources.py:717
+msgid "Resource reservation made but no resource records found"
+msgstr ""
+
+#: ../wallace/module_resources.py:689
+#, python-format
+msgid "Checking if resource %r is a resource (collection)"
+msgstr ""
+
+#: ../wallace/module_resources.py:721
+msgid "The following resources are being referred to in the "
+msgstr ""
+
+#. This is a nested module
+#: ../wallace/modules.py:96
+#, python-format
+msgid "Module Group: %s"
+msgstr ""
+
+#: ../wallace/modules.py:107 ../wallace/modules.py:112
+msgid "No such module."
+msgstr ""
+
+#: ../wallace/modules.py:118
+#, python-format
+msgid "Holding message in queue for manual review (%s by %s)"
+msgstr ""
+
+#: ../wallace/modules.py:121
+#, python-format
+msgid "Deferring message in %s (by module %s)"
+msgstr ""
+
+#: ../wallace/modules.py:131
+#, python-format
+msgid "The time when the message was sent: %r"
+msgstr ""
+
+#: ../wallace/modules.py:132
+#, python-format
+msgid "The time now: %r"
+msgstr ""
+
+#: ../wallace/modules.py:133
+#, python-format
+msgid "The time delta: %r"
+msgstr ""
+
+#. TODO: Send NDR back to user
+#: ../wallace/modules.py:137
+#, python-format
+msgid "Message in file %s older then 5 days, deleting"
+msgstr ""
+
+#: ../wallace/modules.py:162
+#, python-format
+msgid "Rejecting message in %s (by module %s)"
+msgstr ""
+
+#: ../wallace/modules.py:180
+#, python-format
+msgid ""
+"This is the email system Wallace at %s.\n"
+"\n"
+"I'm sorry to inform you we could not deliver the attached message\n"
+"to the following recipients:\n"
+"\n"
+"- %s\n"
+"\n"
+"Your message is being delivered to any other recipients you may have\n"
+"sent your message to. There is no need to resend the message to those\n"
+"recipients.\n"
+msgstr ""
+
+#: ../wallace/modules.py:195
+#, python-format
+msgid ""
+"X-Wallace-Module: %s\n"
+"X-Wallace-Result: REJECT\n"
+msgstr ""
+
+#: ../wallace/modules.py:248
+#, python-format
+msgid "Accepting message in %s (by module %s)"
+msgstr ""
+
+#: ../wallace/modules.py:316
+#, python-format
+msgid "Module '%s' already registered"
+msgstr ""

pykolab-0.7.tar.gz/po/pykolab.pot Added

@@ -0,0 +1,3550 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-07-10 07:21-0400\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../bin/kolab_smtp_access_policy.py:209
+#, python-format
+msgid "Adding policy request to instance %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:479
+msgid "Unauthorized access not allowed"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:508
+#: ../bin/kolab_smtp_access_policy.py:689
+msgid "Could not find recipient"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:527
+#, python-format
+msgid "Could not find envelope sender user %s (511)"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:570
+#, python-format
+msgid "Obtained authenticated user details for %r: %r"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:627
+#, python-format
+msgid "Could not find envelope sender user %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:649
+#, python-format
+msgid "%s is unauthorized to send on behalf of %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:659
+#, python-format
+msgid ""
+"User %s attempted to use envelope sender address %s without authorization"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:713
+#: ../bin/kolab_smtp_access_policy.py:724
+#, python-format
+msgid "Found user %s to be a delegate user of %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:748
+#, python-format
+msgid ""
+"Verifying authenticated sender '%(sender)s' with sasl_username '%"
+"(sasl_username)s' for recipient '%(recipient)s'"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:751
+#, python-format
+msgid ""
+"Verifying unauthenticated sender '%(sender)s' for recipient '%(recipient)s'"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:767
+#, python-format
+msgid "Reproducing verify_recipient(%s, %s) from cache"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:804
+#, python-format
+msgid "Using authentication domain %s instead of %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:814
+#, python-format
+msgid "Domain %s is a primary domain"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:822
+#, python-format
+msgid ""
+"Checking the recipient for domain %s that is not ours. This is probably a "
+"configuration error."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:837
+msgid ""
+"This recipient address is related to multiple object entries and the SMTP "
+"Access Policy can therefore not restrict message flow"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:854
+#, python-format
+msgid ""
+"Recipient address %r not found. Allowing since the MTA was configured to "
+"accept the recipient."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:890
+msgid "Invalid recipient"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:901
+msgid "Could not find this user, accepting"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:974
+#: ../bin/kolab_smtp_access_policy.py:1050
+#, python-format
+msgid "Sender %s is not allowed to send to recipient %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1038
+#, python-format
+msgid "Reproducing verify_sender(%r) from cache"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1055
+msgid "Unverifiable sender."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1060
+msgid "Sender is not using an alias"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1068
+msgid "Sender uses unauthorized envelope sender address"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1085
+msgid "Could not verify sender"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1092
+msgid ""
+"Verifying whether sender is allowed to send to recipient using sender policy"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1105
+#, python-format
+msgid "Result is %r"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1110
+msgid "No recipient policy restrictions exist for this sender"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1119
+msgid "Found a recipient policy to apply for this sender."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1134
+#, python-format
+msgid "Sender %s not allowed to send to recipient %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1155
+msgid "Cleaning up the cache"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1177
+msgid ""
+"The 'uri' setting in the kolab_smtp_access_policy section is soon going to "
+"be deprecated in favor of 'cache_uri'"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1193
+#, python-format
+msgid "Operational Error in caching: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1245
+#, python-format
+msgid "Caching the policy result with timestamp %d"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1319
+#, python-format
+msgid "Returning action DEFER_IF_PERMIT: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1324
+#, python-format
+msgid "Returning action DUNNO: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1329
+#, python-format
+msgid "Returning action HOLD: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1334
+#, python-format
+msgid "Returning action PERMIT: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1459
+#, python-format
+msgid "Returning action REJECT: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1505
+msgid "Starting to loop for new request"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1512
+msgid "Timeout for policy request reading exceeded"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1518
+msgid "End of current request"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1522
+#, python-format
+msgid "Getting line: %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1526
+msgid "Returning request"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1555
+msgid "Access Policy Options"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1562
+msgid "SMTP Policy request timeout."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1568
+msgid "Verify the recipient access policy."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1574
+msgid "Verify the sender access policy."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1580
+msgid "Allow unauthenticated senders."
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1594
+#, python-format
+msgid "Got request instance %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1603
+#, python-format
+msgid "Request instance %s is in state %s"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1611
+#, python-format
+msgid "Request instance %s is not yet in DATA state"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1623
+#, python-format
+msgid "Request instance %s reached DATA state"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1643
+#, python-format
+msgid "Unhandled exception caught: %r"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1647
+msgid "Sender access denied"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1649
+msgid "Recipient access denied"
+msgstr ""
+
+#: ../bin/kolab_smtp_access_policy.py:1651
+msgid "No objections"
+msgstr ""
+
+#: ../conf.py:37 ../kolab-cli.py:34 ../saslauthd.py:33
+msgid "Cannot load pykolab/logger.py:"
+msgstr ""
+
+#: ../kolabd/__init__.py:49 ../saslauthd/__init__.py:51
+#: ../wallace/__init__.py:85
+msgid "Daemon Options"
+msgstr ""
+
+#: ../kolabd/__init__.py:56 ../saslauthd/__init__.py:58
+#: ../wallace/__init__.py:92
+msgid "Fork to the background."
+msgstr ""
+
+#: ../kolabd/__init__.py:65 ../saslauthd/__init__.py:67
+#: ../wallace/__init__.py:118
+msgid "Path to the PID file to use."
+msgstr ""
+
+#: ../kolabd/__init__.py:74 ../saslauthd/__init__.py:76
+#: ../wallace/__init__.py:135
+msgid "Run as user USERNAME"
+msgstr ""
+
+#: ../kolabd/__init__.py:84 ../saslauthd/__init__.py:86
+#: ../wallace/__init__.py:109
+msgid "Run as group GROUPNAME"
+msgstr ""
+
+#: ../kolabd/__init__.py:122 ../pykolab/logger.py:139 ../pykolab/utils.py:234
+#: ../saslauthd/__init__.py:292 ../wallace/__init__.py:329
+#, python-format
+msgid "Group %s does not exist"
+msgstr ""
+
+#: ../kolabd/__init__.py:131 ../saslauthd/__init__.py:301
+#: ../wallace/__init__.py:338
+#, python-format
+msgid "Switching real and effective group id to %d"
+msgstr ""
+
+#: ../kolabd/__init__.py:153 ../pykolab/logger.py:159 ../pykolab/utils.py:258
+#: ../saslauthd/__init__.py:323 ../wallace/__init__.py:360
+#, python-format
+msgid "User %s does not exist"
+msgstr ""
+
+#: ../kolabd/__init__.py:163 ../saslauthd/__init__.py:333
+#: ../wallace/__init__.py:370
+#, python-format
+msgid "Switching real and effective user id to %d"
+msgstr ""
+
+#: ../kolabd/__init__.py:172 ../saslauthd/__init__.py:342
+#: ../wallace/__init__.py:379
+msgid "Could not change real and effective uid and/or gid"
+msgstr ""
+
+#: ../kolabd/__init__.py:192 ../saslauthd/__init__.py:133
+#: ../wallace/__init__.py:399
+msgid "Interrupted by user"
+msgstr ""
+
+#: ../kolabd/__init__.py:197 ../kolabd/__init__.py:208
+msgid "Traceback occurred, please report a "
+msgstr ""
+
+#: ../kolabd/__init__.py:203 ../saslauthd/__init__.py:141
+#: ../wallace/__init__.py:408
+#, python-format
+msgid "Type Error: %s"
+msgstr ""
+
+#: ../kolabd/__init__.py:230
+msgid "Could not connect to LDAP, is it running?"
+msgstr ""
+
+#: ../kolabd/__init__.py:233 ../pykolab/auth/ldap/__init__.py:2137
+#: ../pykolab/cli/cmd_sync.py:36
+msgid "Listing domains..."
+msgstr ""
+
+#: ../kolabd/__init__.py:244
+msgid "No domains. Not syncing"
+msgstr ""
+
+#: ../kolabd/__init__.py:275
+#, python-format
+msgid "added domains: %r, removed domains: %r"
+msgstr ""
+
+#: ../kolabd/process.py:33
+#, python-format
+msgid "Process created for domain %s"
+msgstr ""
+
+#: ../kolabd/process.py:42
+#, python-format
+msgid "Synchronizing for domain %s"
+msgstr ""
+
+#: ../kolabd/process.py:59
+#, python-format
+msgid ""
+"Error in process %r, terminating:\n"
+"\t%r"
+msgstr ""
+
+#: ../kolabd.py:31 ../setup-kolab.py:36 ../wallace.py:31
+msgid "Cannot load pykolab/constants.py:"
+msgstr ""
+
+#: ../pykolab/auth/__init__.py:89
+#, python-format
+msgid "Called for domain %r"
+msgstr ""
+
+#: ../pykolab/auth/__init__.py:106 ../pykolab/auth/__init__.py:115
+#, python-format
+msgid "Using section %s and domain %s"
+msgstr ""
+
+#: ../pykolab/auth/__init__.py:120
+#, python-format
+msgid "Connecting to Authentication backend for domain %s"
+msgstr ""
+
+#: ../pykolab/auth/__init__.py:131
+#, python-format
+msgid "Section %s has no option 'auth_mechanism'"
+msgstr ""
+
+#: ../pykolab/auth/__init__.py:138
+#, python-format
+msgid "Section %s has auth_mechanism: %r"
+msgstr ""
+
+#: ../pykolab/auth/__init__.py:147 ../pykolab/auth/__init__.py:156
+msgid "Starting LDAP..."
+msgstr ""
+
+#: ../pykolab/auth/ldap/cache.py:126
+#, python-format
+msgid "Inserting cache entry %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/cache.py:147
+#, python-format
+msgid "Updating timestamp for cache entry %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/cache.py:155
+#, python-format
+msgid "Updating result_attribute for cache entry %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:52
+msgid "Python LDAP library does not support persistent search"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:143
+#, python-format
+msgid "Attempting to authenticate user %s in realm %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:175 ../pykolab/auth/ldap/__init__.py:226
+#, python-format
+msgid "Authentication cache failed: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:216 ../pykolab/auth/ldap/__init__.py:240
+#, python-format
+msgid "Binding with user_dn %s and password %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:231 ../pykolab/auth/ldap/__init__.py:263
+#, python-format
+msgid "Failed to authenticate as user %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:249
+#, python-format
+msgid "Error occured, there is no such object: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:254
+msgid "Authentication cache failed to clear entry"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:260
+#, python-format
+msgid "Exception occured: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:280
+msgid "Connecting to LDAP..."
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:284
+#, python-format
+msgid "Attempting to use LDAP URI %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:371
+#, python-format
+msgid "Entry ID: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:373
+#, python-format
+msgid "Entry DN: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:376
+#, python-format
+msgid ""
+"ldap search: (%r, %r, filterstr='(objectclass=*)', attrlist=[ 'dn' ] + %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:453
+#, python-format
+msgid "Finding recipient with filter %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:529
+#, python-format
+msgid "Finding resource with filter %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:560
+#, python-format
+msgid "Using timestamp %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:595
+msgid "Applying recipient policy disabled through configuration"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:600
+#, python-format
+msgid "Applying recipient policy to %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:617
+#, python-format
+msgid "Using mail attributes: %r, with primary %r and "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:628
+#, python-format
+msgid "key %r not in entry"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:630
+#, python-format
+msgid "key %r is the prim. mail attr."
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:632
+msgid "prim. mail pol. is not empty"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:635
+#, python-format
+msgid "key %r is the sec. mail attr."
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:637
+msgid "sec. mail pol. is not empty"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:641 ../pykolab/auth/ldap/__init__.py:655
+#, python-format
+msgid "Attributes %r are not yet available for entry %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:694
+#, python-format
+msgid "No results for mail address %s found"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:705
+#, python-format
+msgid "1 result for address %s found, verifying"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:715
+#, python-format
+msgid "Too bad, primary email address %s "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:726 ../pykolab/auth/ldap/__init__.py:815
+msgid "Address assigned to us"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:781
+#, python-format
+msgid "No results for address %s found"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:792
+#, python-format
+msgid "1 result for address %s found, "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:803
+msgid "Too bad, secondary email "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:830
+msgid "Recipient policy composed the following set of secondary "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:841
+#, python-format
+msgid "Secondary mail addresses that we want is not None: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:852
+msgid "Avoiding the duplication of the primary mail "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:863
+#, python-format
+msgid "Entry is getting secondary mail addresses: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:871
+msgid "Entry did not have any secondary mail "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:888 ../pykolab/auth/ldap/__init__.py:894
+#, python-format
+msgid "secondary_mail_addresses: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:889 ../pykolab/auth/ldap/__init__.py:895
+#, python-format
+msgid "entry[%s]: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:906
+#, python-format
+msgid "Entry modifications list: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:934
+#, python-format
+msgid "Setting entry attribute %r to %r for %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:970
+#, python-format
+msgid ""
+"Could not update dn %r:\n"
+"%r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:983
+#, python-format
+msgid "Using filter %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:998
+#, python-format
+msgid "Synchronization is searching against base DN: %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1044
+#, python-format
+msgid "About to consider the user quota for %r (used: %r, "
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1115
+msgid "Invalid DN, username and/or password."
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1236 ../pykolab/auth/ldap/__init__.py:1249
+#: ../pykolab/auth/ldap/__init__.py:1614 ../pykolab/auth/ldap/__init__.py:1627
+#, python-format
+msgid "Found a subject %r with access %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1356
+#, python-format
+msgid "Entry %s attribute value: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1364
+#, python-format
+msgid "imap.user_mailbox_server(%r) result: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1684 ../pykolab/auth/ldap/__init__.py:1853
+#, python-format
+msgid "Result from recipient policy: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:1908
+#, python-format
+msgid "Kolab user %s does not have a result attribute %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2067
+#, python-format
+msgid "Finding domain root dn for domain %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2164
+msgid "Authentication database DOWN"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2248 ../pykolab/auth/ldap/__init__.py:2296
+#, python-format
+msgid "Entry type: %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2321
+#, python-format
+msgid "Done with _synchronize_callback() for entry %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2393
+msgid "LDAP Search Result Data Entry:"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2409
+msgid "Entry Change Notification attributes:"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2414
+#, python-format
+msgid "Change Type: %r (%r)"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2422
+#, python-format
+msgid "Previous DN: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2477
+#, python-format
+msgid "Object %s searched no longer exists"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2487
+#, python-format
+msgid "%d results..."
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2590
+#, python-format
+msgid "Searching with filter %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2642
+#, python-format
+msgid "Checking for support for %s on %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2661
+#, python-format
+msgid "Found support for %s"
+msgstr ""
+
+#: ../pykolab/auth/ldap/__init__.py:2706
+#, python-format
+msgid "An error occured using %s: %r"
+msgstr ""
+
+#: ../pykolab/auth/ldap/syncrepl.py:46
+msgid "The name of the persistent, unique attribute "
+msgstr ""
+
+#: ../pykolab/cli/cmd_acl_cleanup.py:34
+msgid "Clean up ACLs that use identifiers that no longer exist"
+msgstr ""
+
+#: ../pykolab/cli/cmd_acl_cleanup.py:56
+#, python-format
+msgid "Deleting ACL %s for subject %s on folder %s"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_alias.py:42
+msgid "Specify the (new) alias address"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_alias.py:45
+msgid "Specify the existing recipient address"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_alias.py:66 ../pykolab/cli/cmd_add_alias.py:70
+#, python-format
+msgid "Domain %r is not a local domain"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_alias.py:75
+msgid "Primary and secondary domain do not have the same parent domain"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_alias.py:81
+#, python-format
+msgid "No such recipient %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_alias.py:87
+#, python-format
+msgid "Recipient for alias %r already exists"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_alias.py:97
+msgid "Environment is not configured for "
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_alias.py:105
+#, python-format
+msgid "Recipient %r is not the primary recipient for address %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_domain.py:36
+#: ../pykolab/cli/cmd_count_domain_mailboxes.py:38
+#: ../pykolab/cli/cmd_create_mailbox.py:36
+#: ../pykolab/cli/cmd_export_mailbox.py:33
+#: ../pykolab/cli/cmd_list_deleted_mailboxes.py:38
+#: ../pykolab/cli/cmd_list_domain_mailboxes.py:36
+#: ../pykolab/cli/cmd_list_mailboxes.py:40
+#: ../pykolab/cli/cmd_list_mailbox_metadata.py:37
+#: ../pykolab/cli/cmd_list_messages.py:37 ../pykolab/cli/cmd_list_quota.py:36
+#: ../pykolab/cli/cmd_list_user_subscriptions.py:36
+#: ../pykolab/cli/cmd_server_info.py:34
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:38
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:39
+#: ../pykolab/cli/cmd_undelete_mailbox.py:34
+msgid "CLI Options"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_domain.py:42
+msgid "Add alias domain."
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_domain.py:47
+msgid "Add a new domain."
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_domain.py:55 ../pykolab/cli/cmd_delete_domain.py:44
+#: ../pykolab/cli/cmd_find_domain.py:44
+msgid "Could not find credentials with sufficient permissions"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_domain.py:67 ../pykolab/cli/cmd_delete_domain.py:56
+#: ../pykolab/cli/cmd_find_domain.py:56
+msgid "Domain name"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_user_subscription.py:37
+msgid "Subscribe a user to a folder."
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_user_subscription.py:47
+#: ../pykolab/cli/cmd_add_user_subscription.py:51
+#: ../pykolab/cli/cmd_remove_user_subscription.py:47
+#: ../pykolab/cli/cmd_remove_user_subscription.py:51
+msgid "Folder pattern"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_user_subscription.py:50
+#: ../pykolab/cli/cmd_list_user_subscriptions.py:63
+#: ../pykolab/cli/cmd_remove_user_subscription.py:50
+msgid "User ID"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_user_subscription.py:72
+#: ../pykolab/cli/cmd_remove_user_subscription.py:72
+#, python-format
+msgid "Cannot subscribe user to folder %r:"
+msgstr ""
+
+#: ../pykolab/cli/cmd_add_user_subscription.py:73
+#: ../pykolab/cli/cmd_delete_message.py:61
+#: ../pykolab/cli/cmd_list_messages.py:67
+#: ../pykolab/cli/cmd_remove_user_subscription.py:73
+msgid "No such folder"
+msgstr ""
+
+#: ../pykolab/cli/cmd_count_domain_mailboxes.py:44
+#: ../pykolab/cli/cmd_list_deleted_mailboxes.py:50
+#: ../pykolab/cli/cmd_list_domain_mailboxes.py:48
+#: ../pykolab/cli/cmd_list_mailboxes.py:52 ../pykolab/cli/cmd_list_quota.py:42
+#: ../pykolab/cli/cmd_server_info.py:40
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:57
+msgid "List mailboxes on server SERVER only."
+msgstr ""
+
+#: ../pykolab/cli/cmd_create_mailbox.py:42
+msgid "Set metadata for folder to ANNOTATION=VALUE"
+msgstr ""
+
+#: ../pykolab/cli/cmd_create_mailbox.py:50
+msgid "Create folder on PARTITION."
+msgstr ""
+
+#: ../pykolab/cli/cmd_create_mailbox.py:60
+msgid "Invalid argument"
+msgstr ""
+
+#: ../pykolab/cli/cmd_create_mailbox.py:68
+msgid "Invalid argument for metadata"
+msgstr ""
+
+#: ../pykolab/cli/cmd_delete_domain.py:36
+msgid "Delete a domain."
+msgstr ""
+
+#: ../pykolab/cli/cmd_delete_mailbox_acl.py:45
+#: ../pykolab/cli/cmd_delete_mailbox_acl.py:49
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:50
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:55
+msgid "ACI Subject"
+msgstr ""
+
+#: ../pykolab/cli/cmd_delete_mailbox_acl.py:48
+#: ../pykolab/cli/cmd_list_mailbox_acls.py:43
+#: ../pykolab/cli/cmd_list_mailbox_metadata.py:54
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:54
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:66
+#: ../pykolab/cli/cmd_set_quota.py:46 ../tests/unit/test-015-translate.py:12
+#: ../tests/unit/test-015-translate.py:16
+#: ../tests/unit/test-015-translate.py:18
+#: ../tests/unit/test-015-translate.py:20
+msgid "Folder name"
+msgstr ""
+
+#: ../pykolab/cli/cmd_delete_mailbox_acl.py:60
+#: ../pykolab/cli/cmd_list_mailbox_acls.py:54
+#: ../pykolab/cli/cmd_list_mailbox_metadata.py:80
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:67
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:94
+#: ../pykolab/cli/cmd_set_quota.py:58
+#, python-format
+msgid "No such folder %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_delete_mailbox.py:46
+msgid "No mailbox specified"
+msgstr ""
+
+#: ../pykolab/cli/cmd_delete_mailbox.py:56
+msgid "No such folder(s)"
+msgstr ""
+
+#: ../pykolab/cli/cmd_delete_message.py:36
+msgid "Delete a message from a folder"
+msgstr ""
+
+#: ../pykolab/cli/cmd_delete_message.py:49
+msgid "Specify a UID"
+msgstr ""
+
+#: ../pykolab/cli/cmd_delete_message.py:52
+#: ../pykolab/cli/cmd_list_messages.py:58
+msgid "Specify a folder"
+msgstr ""
+
+#: ../pykolab/cli/cmd_export_mailbox.py:38
+msgid "All folders this user has access to"
+msgstr ""
+
+#: ../pykolab/cli/cmd_export_mailbox.py:108
+#, python-format
+msgid "%s is not a directory"
+msgstr ""
+
+#: ../pykolab/cli/cmd_export_mailbox.py:118
+#, python-format
+msgid "ZIP file at %s.zip"
+msgstr ""
+
+#: ../pykolab/cli/cmd_export_mailbox.py:120
+#, python-format
+msgid "No directories found for user %s"
+msgstr ""
+
+#: ../pykolab/cli/cmd_find_domain.py:36
+msgid "Find a domain."
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_deleted_mailboxes.py:43
+#: ../pykolab/cli/cmd_list_domain_mailboxes.py:41
+#: ../pykolab/cli/cmd_list_mailboxes.py:45
+#: ../pykolab/cli/cmd_list_user_subscriptions.py:41
+msgid "Display raw IMAP UTF-7 folder names"
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_domain_mailboxes.py:58
+msgid "Domain"
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_mailboxes.py:87
+#, python-format
+msgid "Appending folder search for %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_mailbox_metadata.py:44
+msgid "List annotations as user USER"
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_messages.py:43
+msgid "Include messages flagged as \\Deleted"
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_messages.py:47
+msgid "List messages in a folder"
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_quota.py:73 ../pykolab/cli/cmd_list_quota.py:89
+#, python-format
+msgid "The quota for folder %s is set to literally allow 0KB of storage."
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_user_subscriptions.py:47
+msgid "List unsubscribed folders"
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_user_subscriptions.py:50
+msgid "List the folders a user is subscribed to."
+msgstr ""
+
+#: ../pykolab/cli/cmd_list_user_subscriptions.py:98
+#, python-format
+msgid "No unsubscribed folders for user %s"
+msgstr ""
+
+#: ../pykolab/cli/cmd_mailbox_cleanup.py:37
+msgid "Clean up mailboxes that do no longer have an owner."
+msgstr ""
+
+#: ../pykolab/cli/cmd_mailbox_cleanup.py:61
+#, python-format
+msgid "Deleting folder 'user/%s'"
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_mailaddress.py:49
+msgid "Invalid or unqualified email address."
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_mailaddress.py:57
+#, python-format
+msgid "No recipient found for email address %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_mailaddress.py:60
+#, python-format
+msgid "Found the following recipient(s): %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_mailaddress.py:66
+#, python-format
+msgid "Using the following mail attributes: %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_mailaddress.py:90
+msgid "Found the following recipients:"
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_user_subscription.py:37
+msgid "Unsubscribe a user from a folder."
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_user_subscription.py:86
+#, python-format
+msgid "Successfully unsubscribed user %s from the following folders:"
+msgstr ""
+
+#: ../pykolab/cli/cmd_remove_user_subscription.py:92
+#, python-format
+msgid "User %s was not unsubscribed from any folders."
+msgstr ""
+
+#: ../pykolab/cli/cmd_rename_mailbox.py:52
+msgid "No target mailbox name specified"
+msgstr ""
+
+#: ../pykolab/cli/cmd_rename_mailbox.py:54
+msgid "No source mailbox name specified"
+msgstr ""
+
+#: ../pykolab/cli/cmd_rename_mailbox.py:66
+#, python-format
+msgid "Source folder %r does not exist"
+msgstr ""
+
+#: ../pykolab/cli/cmd_rename_mailbox.py:70
+#, python-format
+msgid "Target folder %r already exists"
+msgstr ""
+
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:47
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:51
+#: ../pykolab/cli/cmd_set_mailbox_acl.py:56
+msgid "ACI Permissions"
+msgstr ""
+
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:45
+msgid "Set annotation as user USER"
+msgstr ""
+
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:59
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:63
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:68
+msgid "Metadata value"
+msgstr ""
+
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:62
+#: ../pykolab/cli/cmd_set_mailbox_metadata.py:67
+msgid "Metadata path"
+msgstr ""
+
+#: ../pykolab/cli/cmd_set_quota.py:43 ../pykolab/cli/cmd_set_quota.py:47
+msgid "New quota"
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:44
+msgid "Delete mailboxes for recipients that do not appear to exist in LDAP."
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:50
+msgid "Display changes, do not apply them."
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:88
+#, python-format
+msgid "Domains in IMAP not in LDAP: %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:101
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:142
+#, python-format
+msgid ""
+"No recipients for '%s' (would have deleted the mailbox if not for --dry-run)!"
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:106
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:147
+#, python-format
+msgid "Deleting mailbox '%s' because it has no recipients"
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:110
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:151
+#, python-format
+msgid "An error occurred removing mailbox %r: %r"
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:112
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:153
+#, python-format
+msgid "Not automatically deleting shared folder '%s'"
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:114
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:155
+#, python-format
+msgid "No recipients for '%s' (use --delete to delete)!"
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync_mailhost_attrs.py:136
+#, python-format
+msgid "Multiple recipients for '%s'!"
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync.py:41
+#, python-format
+msgid "Found %d domains in %d seconds"
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync.py:51
+#, python-format
+msgid "Running for domain %s"
+msgstr ""
+
+#: ../pykolab/cli/cmd_sync.py:58
+#, python-format
+msgid "Synchronizing users for %s took %d seconds"
+msgstr ""
+
+#: ../pykolab/cli/cmd_undelete_mailbox.py:39
+msgid "Do not actually execute, but state what would have been executed."
+msgstr ""
+
+#: ../pykolab/cli/cmd_undelete_mailbox.py:42
+msgid "Recover mailboxes previously deleted."
+msgstr ""
+
+#: ../pykolab/cli/cmd_user_info.py:39
+msgid "Email address"
+msgstr ""
+
+#. This is a nested command
+#. This is a nested component
+#: ../pykolab/cli/commands.py:98 ../pykolab/setup/components.py:90
+#, python-format
+msgid "Command Group: %s"
+msgstr ""
+
+#: ../pykolab/cli/commands.py:113 ../pykolab/cli/commands.py:118
+msgid "No such command."
+msgstr ""
+
+#: ../pykolab/cli/commands.py:168 ../pykolab/setup/components.py:231
+#, python-format
+msgid "Command '%s' already registered"
+msgstr ""
+
+#: ../pykolab/cli/commands.py:193 ../pykolab/setup/components.py:257
+#: ../wallace/modules.py:369
+#, python-format
+msgid "Alias for %s"
+msgstr ""
+
+#: ../pykolab/cli/commands.py:201 ../pykolab/setup/components.py:265
+msgid "Not yet implemented"
+msgstr ""
+
+#: ../pykolab/cli/sieve/cmd_list.py:43 ../pykolab/cli/sieve/cmd_put.py:42
+#: ../pykolab/cli/sieve/cmd_refresh.py:44 ../pykolab/cli/sieve/cmd_test.py:43
+msgid "Email Address"
+msgstr ""
+
+#: ../pykolab/cli/sieve/cmd_refresh.py:99
+#: ../pykolab/plugins/sievemgmt/__init__.py:111
+#, python-format
+msgid "Found the following scripts for user %s: %s"
+msgstr ""
+
+#: ../pykolab/cli/sieve/cmd_refresh.py:100
+#: ../pykolab/plugins/sievemgmt/__init__.py:112
+#, python-format
+msgid "And the following script is active for user %s: %s"
+msgstr ""
+
+#: ../pykolab/cli/sieve/cmd_refresh.py:178
+#: ../pykolab/plugins/sievemgmt/__init__.py:190
+#, python-format
+msgid ""
+"Delivery to folder active, but no folder name attribute available for user %r"
+msgstr ""
+
+#: ../pykolab/cli/sieve/cmd_refresh.py:181
+#: ../pykolab/plugins/sievemgmt/__init__.py:193
+msgid "Delivery to folder active, but no folder name attribute configured"
+msgstr ""
+
+#: ../pykolab/cli/sieve/cmd_refresh.py:359
+#, python-format
+msgid "MANAGEMENT script for user %s contents: %r"
+msgstr ""
+
+#: ../pykolab/cli/sieve/cmd_refresh.py:364
+#: ../pykolab/plugins/sievemgmt/__init__.py:374
+#, python-format
+msgid "Uploading script MANAGEMENT failed for user %s"
+msgstr ""
+
+#: ../pykolab/cli/sieve/cmd_refresh.py:366
+#: ../pykolab/plugins/sievemgmt/__init__.py:376
+#, python-format
+msgid "Uploading script MANAGEMENT for user %s succeeded"
+msgstr ""
+
+#: ../pykolab/cli/sieve/cmd_refresh.py:377
+#: ../pykolab/plugins/sievemgmt/__init__.py:387
+#, python-format
+msgid "Including script %s in USER (for user %s)"
+msgstr ""
+
+#: ../pykolab/cli/sieve/cmd_refresh.py:386
+#: ../pykolab/plugins/sievemgmt/__init__.py:396
+#, python-format
+msgid "Uploading script USER failed for user %s"
+msgstr ""
+
+#: ../pykolab/cli/sieve/cmd_refresh.py:388
+#: ../pykolab/plugins/sievemgmt/__init__.py:398
+#, python-format
+msgid "Uploading script USER for user %s succeeded"
+msgstr ""
+
+#: ../pykolab/cli/sieve/cmd_refresh.py:416
+#: ../pykolab/plugins/sievemgmt/__init__.py:426
+#, python-format
+msgid "Uploading script MASTER failed for user %s"
+msgstr ""
+
+#: ../pykolab/cli/sieve/cmd_refresh.py:418
+#: ../pykolab/plugins/sievemgmt/__init__.py:428
+#, python-format
+msgid "Uploading script MASTER for user %s succeeded"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_examine_command_issue.py:40
+msgid "Unspecified command issue identifier"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_examine_command_issue.py:50
+msgid "Invalid command issue identifier"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_examine_command_issue.py:60
+#: ../pykolab/cli/telemetry/cmd_examine_session.py:65
+msgid "Invalid session identifier"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_examine_command_issue.py:75
+#: ../pykolab/cli/telemetry/cmd_examine_session.py:100
+#, python-format
+msgid "Session by %s on server %s"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_examine_session.py:43
+msgid "Unspecified session identifier"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_list_sessions.py:35
+msgid "List Options"
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_list_sessions.py:40
+msgid "Display sessions since ..."
+msgstr ""
+
+#: ../pykolab/cli/telemetry/cmd_list_sessions.py:58
+#, python-format
+msgid "Session for user %s started at %s with ID %s"
+msgstr ""
+
+#: ../pykolab/conf/entitlement.py:57 ../pykolab/conf/entitlement.py:80
+#: ../pykolab/conf/entitlement.py:98 ../pykolab/conf/entitlement.py:116
+#: ../pykolab/conf/entitlement.py:230 ../pykolab/conf/entitlement.py:246
+#: ../pykolab/conf/entitlement.py:262
+msgid "Invalid entitlement verification "
+msgstr ""
+
+#: ../pykolab/conf/entitlement.py:120 ../pykolab/conf/entitlement.py:123
+msgid "Invalid entitlement certificate"
+msgstr ""
+
+#: ../pykolab/conf/entitlement.py:132
+#, python-format
+msgid "Parsing entitlement file %s"
+msgstr ""
+
+#: ../pykolab/conf/entitlement.py:141
+#, python-format
+msgid "License file %s not readable!"
+msgstr ""
+
+#: ../pykolab/conf/entitlement.py:147
+msgid "No entitlement directory found"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:87
+#, python-format
+msgid "Setting %s to %r (from defaults)"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:106
+#, python-format
+msgid "Setting %s to %r (from CLI, verified)"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:109
+#, python-format
+msgid "Setting %s to %r (from CLI, not checked)"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:150 ../pykolab/conf/__init__.py:207
+#, python-format
+msgid "Setting %s_%s to '****' (from configuration file)"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:152 ../pykolab/conf/__init__.py:209
+#, python-format
+msgid "Setting %s_%s to %r (from configuration file)"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:162
+msgid "Setting options from configuration file"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:223
+#, python-format
+msgid "Configuration file %s not readable"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:226
+#, python-format
+msgid "Reading configuration file %s"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:230
+#, python-format
+msgid "Invalid configuration file %s"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:233
+#, python-format
+msgid "No master configuration section [kolab] in configuration file %s"
+msgstr ""
+
+#. #
+#. # Runtime Options
+#. #
+#: ../pykolab/conf/__init__.py:267
+msgid "Runtime Options"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:272
+msgid "Configuration file to use"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:278
+msgid "Set the debugging "
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:286
+msgid "Set the logging level. "
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:294
+msgid "Log file to use"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:300
+msgid "Be quiet."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:306
+msgid "Answer yes to all questions."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:328
+msgid "No command supplied"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:416
+msgid "Insufficient options. Need section, key and value -in that order."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:419
+#, python-format
+msgid "No section '%s' exists."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:461
+#, python-format
+msgid "Setting %s to %r (from the default values for CLI options)"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:534
+#, python-format
+msgid "Could not execute configuration function: %s"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:542
+#, python-format
+msgid "Option %s/%s does not exist in config file %s, pulling from defaults"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:550 ../pykolab/conf/__init__.py:553
+msgid "Option does not exist in defaults."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:563
+#, python-format
+msgid "Configuration file %s not readable."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:566
+#, python-format
+msgid "Configuration file %s does not exist."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:571
+msgid ""
+"WARNING: A negative debug level value does not make this program be any more "
+"silent."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:577
+msgid "This program has 9 levels of verbosity. Using the maximum of 9."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:585 ../pykolab/conf/__init__.py:591
+msgid "Cannot start SASL authentication daemon"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:602
+msgid "No imaplib library found."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:612
+msgid "No LMTP class found in the smtplib library."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:622
+msgid "No SMTP class found in the smtplib library."
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:636
+#, python-format
+msgid "Found you specified a specific set of items to test: %s"
+msgstr ""
+
+#: ../pykolab/conf/__init__.py:644
+#, python-format
+msgid "Selectively selecting: %s"
+msgstr ""
+
+#: ../pykolab/constants.py.in:40
+msgid ""
+"PyKolab is a Kolab Systems product. For more information about Kolab or "
+"PyKolab, visit http://www.kolabsys.com"
+msgstr ""
+
+#: ../pykolab/constants.py.in:53
+msgid "WARNING"
+msgstr ""
+
+#: ../pykolab/constants.py.in:53
+msgid ""
+"The Fully Qualified Domain Name or FQDN for this system is incorrect. "
+"Falling back to 'localdomain'."
+msgstr ""
+
+#: ../pykolab/constants.py.in:72
+msgid "389 Directory Server or Red Hat Directory Server"
+msgstr ""
+
+#: ../pykolab/constants.py.in:76 ../pykolab/constants.py.in:80
+msgid "OpenLDAP or compatible"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:80
+#, python-format
+msgid "Could not connect to Cyrus IMAP server %r"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:137
+#, python-format
+msgid "Continuing with separator: %r"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:142
+msgid "Detected we are running in a Murder topology"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:146
+msgid "This system is not part of a murder topology"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:167
+#, python-format
+msgid "Checking actual backend server for folder %s through annotations"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:172
+msgid "Possibly reproducing the find "
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:195
+#, python-format
+msgid "Could not get the annotations after %s tries."
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:199
+#, python-format
+msgid "No annotations for %s: %r"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:206
+#, python-format
+msgid "Server for INBOX folder %s is %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:226
+#, python-format
+msgid "Setting quota for folder %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:230
+#, python-format
+msgid "Could not set quota for mailfolder %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:239
+#, python-format
+msgid "Moving INBOX folder %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:254
+#, python-format
+msgid "Setting annotation %s on folder %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:259
+#, python-format
+msgid "Could not set annotation %r on mail folder %r: %r"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:263
+#, python-format
+msgid "Transferring folder %s from %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:323
+#, python-format
+msgid "Undeleting %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:334
+#, python-format
+msgid "Would have transfered %s from %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/cyrus.py:336
+#, python-format
+msgid "Would have renamed %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:46
+#, python-format
+msgid "Cleaning up ACL entries for %s across all folders"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:61
+#, python-format
+msgid "Cleaning up ACL entries referring to identifier %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:70
+#, python-format
+msgid "Iterating over %d folders"
+msgstr ""
+
+#. Set the ACL to '' (effectively deleting the ACL entry)
+#: ../pykolab/imap/__init__.py:83
+#, python-format
+msgid "Removing acl %r for subject %r from folder %r"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:145
+msgid "No administrator password is available."
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:153
+#, python-format
+msgid "Logging on to Cyrus IMAP server %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:162
+#, python-format
+msgid "Logging on to Dovecot IMAP server %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:171
+#, python-format
+msgid "Logging on to generic IMAP server %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:189
+#, python-format
+msgid "Reusing existing IMAP server connection to %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:191
+#, python-format
+msgid "Reconnecting to IMAP server %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:208
+msgid "Called imap.disconnect() on a server that we had no connection to."
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:222 ../pykolab/imap/__init__.py:234
+#, python-format
+msgid "Could not create folder %r"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:223
+#, python-format
+msgid " on server %r"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:244 ../pykolab/imap/__init__.py:246
+#, python-format
+msgid "%r has no attribute %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:393 ../pykolab/imap/__init__.py:428
+#, python-format
+msgid "Creating new shared folder %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:453 ../pykolab/imap/__init__.py:675
+#, python-format
+msgid "Downcasing mailbox name %r"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:457
+#, python-format
+msgid "Creating new mailbox for user %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:470
+msgid "Waiting for the Cyrus IMAP Murder to settle..."
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:516
+#, python-format
+msgid "Creating additional folders for user %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:535
+#, python-format
+msgid "Waiting for the Cyrus murder to settle... %r"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:547
+#, python-format
+msgid "Correcting additional folder name from %r to %r"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:553
+#, python-format
+msgid "Mailbox already exists: %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:593
+msgid "Subscribing user to the additional folders"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:607
+msgid "Using the following tests for folder subscriptions:"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:609
+#, python-format
+msgid "    %r"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:612
+#, python-format
+msgid "Folder %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:624
+#, python-format
+msgid "Subscribing %s to folder %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:628
+#, python-format
+msgid "Subscribing %s to folder %s failed: %r"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:658
+#, python-format
+msgid "Could not rename %s to reside on partition %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:691
+#, python-format
+msgid "INBOX folder to rename (%s) does not exist"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:694 ../pykolab/imap/__init__.py:770
+#, python-format
+msgid "Renaming INBOX from %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:698
+#, python-format
+msgid "Could not rename INBOX folder %s to %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:700 ../pykolab/imap/__init__.py:774
+#, python-format
+msgid "Moving INBOX folder %s won't succeed as target folder %s already exists"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:704
+#, python-format
+msgid "Server for mailbox %r is %r"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:712
+#, python-format
+msgid "Looking for folder '%s', we found folders: %r"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:735
+#, python-format
+msgid "Setting ACL rights %s for subject %s on folder "
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:746
+#, python-format
+msgid "Removing ACL rights %s for subject %s on folder "
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:767
+#, python-format
+msgid "Found old INBOX folder %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:776
+#, python-format
+msgid "Did not find old folder user/%s to rename"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:778
+msgid "Value for user is not a dictionary"
+msgstr ""
+
+#. TODO: Go in fact correct the quota.
+#: ../pykolab/imap/__init__.py:846
+#, python-format
+msgid "Cannot get current IMAP quota for folder %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:859
+#, python-format
+msgid "Quota for %s currently is %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:865
+#, python-format
+msgid "Adjusting authentication database quota for folder %s to %d"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:870
+#, python-format
+msgid "Correcting quota for %s to %s (currently %s)"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:947
+#, python-format
+msgid "Checking folder: %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:952
+#, python-format
+msgid "Folder has no corresponding user (1): %s"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:955
+#, python-format
+msgid "Folder has no corresponding user (2): %s"
+msgstr ""
+
+#. We got user identifier only
+#: ../pykolab/imap/__init__.py:970
+msgid "Please don't give us just a user identifier"
+msgstr ""
+
+#: ../pykolab/imap/__init__.py:973
+#, python-format
+msgid "Deleting folder %s"
+msgstr ""
+
+#: ../pykolab/__init__.py:50
+msgid "Returning thread local configuration"
+msgstr ""
+
+#: ../pykolab/itip/__init__.py:43
+#, python-format
+msgid "Method %r not really interesting for us."
+msgstr ""
+
+#: ../pykolab/itip/__init__.py:49
+#, python-format
+msgid "Raw iTip payload: %s"
+msgstr ""
+
+#: ../pykolab/itip/__init__.py:59
+msgid "Could not read iTip from message."
+msgstr ""
+
+#: ../pykolab/itip/__init__.py:67
+#, python-format
+msgid "Duplicate iTip object: %s"
+msgstr ""
+
+#: ../pykolab/itip/__init__.py:90
+msgid "iTip event without a start"
+msgstr ""
+
+#: ../pykolab/itip/__init__.py:132
+msgid "Message is not an iTip message (non-multipart message)"
+msgstr ""
+
+#: ../pykolab/itip/__init__.py:225
+#, python-format
+msgid "Failed to compose iTip reply message: %r"
+msgstr ""
+
+#: ../pykolab/itip/__init__.py:236 ../wallace/module_invitationpolicy.py:936
+#: ../wallace/module_resources.py:964
+#, python-format
+msgid "SMTP sendmail error: %r"
+msgstr ""
+
+#: ../pykolab/logger.py:173 ../pykolab/logger.py:179
+#, python-format
+msgid "Could not change permissions on %s: %r"
+msgstr ""
+
+#: ../pykolab/logger.py:196
+#, python-format
+msgid "Cannot log to file %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/defaultfolders/__init__.py:47
+#, python-format
+msgid "Plugin %s called without required keyword %s."
+msgstr ""
+
+#: ../pykolab/plugins/defaultfolders/__init__.py:53
+msgid "Could not parse additional_folders"
+msgstr ""
+
+#: ../pykolab/plugins/dynamicquota/__init__.py:58
+#, python-format
+msgid "No keyword %s passed to set_user_folder_quota"
+msgstr ""
+
+#: ../pykolab/plugins/dynamicquota/__init__.py:70
+#, python-format
+msgid "Quota '%s' not an integer!"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:70
+#, python-format
+msgid "ImportError for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:74
+#, python-format
+msgid "RuntimeError for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:78
+#, python-format
+msgid "Plugin %s failed to load (%s: %s)"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:116 ../pykolab/plugins/__init__.py:118
+#, python-format
+msgid "Cannot set defaults for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:120
+#, python-format
+msgid "Cannot set defaults for plugin %s: Unknown Error"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:123
+#, python-format
+msgid "Not setting defaults for plugin %s: No function 'set_defaults()'"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:142
+#, python-format
+msgid "Cannot set runtime for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:144
+#, python-format
+msgid "Not setting runtime for plugin %s: No function 'set_runtime()'"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:163 ../pykolab/plugins/__init__.py:165
+#, python-format
+msgid "Cannot add options for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:167
+#, python-format
+msgid "Not adding options for plugin %s: No function 'add_options()'"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:187
+#, python-format
+msgid "Cannot check options for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:189
+#, python-format
+msgid "Not checking options for plugin %s: No function 'check_options()'"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:227
+#, python-format
+msgid "Executing hook %s for plugin %s"
+msgstr ""
+
+#: ../pykolab/plugins/__init__.py:231 ../pykolab/plugins/__init__.py:233
+#, python-format
+msgid "Cannot execute hook %s for plugin %s: %s"
+msgstr ""
+
+#: ../pykolab/plugins/recipientpolicy/__init__.py:79
+msgid "Attribute substitution for 'mail' failed in Recipient Policy"
+msgstr ""
+
+#: ../pykolab/plugins/recipientpolicy/__init__.py:116
+msgid "Could not parse the alternative mail routines"
+msgstr ""
+
+#: ../pykolab/plugins/recipientpolicy/__init__.py:120
+#, python-format
+msgid "Alternative mail routines: %r"
+msgstr ""
+
+#: ../pykolab/plugins/recipientpolicy/__init__.py:127
+#, python-format
+msgid ""
+"An error occurred in composing the secondary mail attribute for entry %r"
+msgstr ""
+
+#: ../pykolab/plugins/recipientpolicy/__init__.py:138
+#: ../pykolab/plugins/recipientpolicy/__init__.py:153
+#, python-format
+msgid "Appending additional mail address: %s"
+msgstr ""
+
+#: ../pykolab/plugins/recipientpolicy/__init__.py:142
+#, python-format
+msgid "Policy for secondary email address failed: %r"
+msgstr ""
+
+#: ../pykolab/plugins/recipientpolicy/__init__.py:157
+msgid ""
+"Attribute substitution for 'alternative_mail' failed in Recipient Policy"
+msgstr ""
+
+#: ../pykolab/plugins/roundcubedb/__init__.py:48
+#, python-format
+msgid "user_delete: %r"
+msgstr ""
+
+#: ../pykolab/plugins/roundcubedb/__init__.py:55
+#: ../pykolab/setup/setup_roundcube.py:160
+msgid "Roundcube installation path not found."
+msgstr ""
+
+#: ../pykolab/plugins/sievemgmt/__init__.py:51
+msgid "Wrong number of arguments for sieve management plugin"
+msgstr ""
+
+#: ../pykolab/setup/components.py:58
+msgid "Display this help."
+msgstr ""
+
+#: ../pykolab/setup/components.py:149
+msgid "No component selected, continuing for all components"
+msgstr ""
+
+#: ../pykolab/setup/components.py:187 ../pykolab/setup/components.py:192
+msgid "No such component."
+msgstr ""
+
+#: ../pykolab/setup/setup_freebusy.py:46
+msgid "Setup Free/Busy."
+msgstr ""
+
+#: ../pykolab/setup/setup_freebusy.py:50
+msgid "Free/Busy is not installed on this system"
+msgstr ""
+
+#: ../pykolab/setup/setup_imap.py:45
+msgid "Setup IMAP."
+msgstr ""
+
+#: ../pykolab/setup/setup_imap.py:89
+msgid "Could not write out Cyrus IMAP configuration file /etc/imapd.conf"
+msgstr ""
+
+#: ../pykolab/setup/setup_imap.py:114
+msgid "Could not write out Cyrus IMAP configuration file /etc/cyrus.conf"
+msgstr ""
+
+#: ../pykolab/setup/setup_imap.py:158
+msgid "Could not start the cyrus-imapd and kolab-saslauthd services."
+msgstr ""
+
+#: ../pykolab/setup/setup_imap.py:173 ../pykolab/setup/setup_kolabd.py:81
+#: ../pykolab/setup/setup_ldap.py:426 ../pykolab/setup/setup_mta.py:455
+#: ../pykolab/setup/setup_mysql.py:58 ../pykolab/setup/setup_roundcube.py:237
+#: ../pykolab/setup/setup_syncroton.py:102
+msgid "Could not configure to start on boot, the "
+msgstr ""
+
+#: ../pykolab/setup/setup_kolabd.py:43
+msgid "Setup the Kolab daemon."
+msgstr ""
+
+#: ../pykolab/setup/setup_kolabd.py:51
+#, python-format
+msgid ""
+"\n"
+"                            Copying the configuration section for 'example."
+"org' over to\n"
+"                            a section applicable to your domain '%s'.\n"
+"                        "
+msgstr ""
+
+#: ../pykolab/setup/setup_kolabd.py:72
+msgid "Could not start the kolab server service."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:45
+msgid "LDAP Options"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:52
+msgid "Specify FQDN (overriding defaults)."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:60
+msgid "Allow anonymous binds (default: no)."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:68
+msgid "Skip setting up the LDAP server."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:76
+msgid "Setup configuration for OpenLDAP compatibility."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:84
+msgid "Setup configuration for Active Directory compatibility."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:88
+msgid "Setup LDAP."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:97
+msgid "Skipping setup of LDAP, as specified"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:126
+msgid ""
+"\n"
+"                        You can not configure Kolab to run against OpenLDAP\n"
+"                        and Active Directory simultaneously.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:139
+msgid ""
+"\n"
+"                                It seems 389 Directory Server has an "
+"existing\n"
+"                                instance configured. This setup script does "
+"not\n"
+"                                intend to destroy or overwrite your data. "
+"Please\n"
+"                                make sure /etc/dirsrv/ and /var/lib/dirsrv/ "
+"are\n"
+"                                clean so that this setup does not have to "
+"worry.\n"
+"                            "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:154
+msgid ""
+"\n"
+"                        Please supply a password for the LDAP administrator "
+"user\n"
+"                        'admin', used to login to the graphical console of "
+"389\n"
+"                        Directory server.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:162
+msgid "Administrator password"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:169
+msgid ""
+"\n"
+"                        Please supply a password for the LDAP Directory "
+"Manager\n"
+"                        user, which is the administrator user you will be "
+"using\n"
+"                        to at least initially log in to the Web Admin, and "
+"that\n"
+"                        Kolab uses to perform administrative tasks.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:178
+msgid "Directory Manager password"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:185
+msgid ""
+"\n"
+"                        Please choose the system user and group the service\n"
+"                        should use to run under. These should be existing,\n"
+"                        unprivileged, local system POSIX accounts with no "
+"shell.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:195 ../pykolab/setup/setup_ldap.py:198
+msgid "User"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:196 ../pykolab/setup/setup_ldap.py:199
+msgid "Group"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:234
+msgid ""
+"\n"
+"                        This setup procedure plans to set up Kolab Groupware "
+"for\n"
+"                        the following domain name space. This domain name "
+"is\n"
+"                        obtained from the reverse DNS entry on your network\n"
+"                        interface. Please confirm this is the appropriate "
+"domain\n"
+"                        name space.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:248
+msgid "Domain name to use"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:253 ../pykolab/setup/setup_ldap.py:278
+msgid ""
+"\n"
+"                                    Invalid input. Please try again.\n"
+"                                "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:262
+msgid ""
+"\n"
+"                        The standard root dn we composed for you follows. "
+"Please\n"
+"                        confirm this is the root dn you wish to use.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:273
+msgid "Root DN to use"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:325
+msgid "No directory server setup tool available."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:337
+msgid ""
+"\n"
+"                    Setup is now going to set up the 389 Directory Server. "
+"This\n"
+"                    may take a little while (during which period there is "
+"no\n"
+"                    output and no progress indication).\n"
+"                "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:344
+msgid "Setting up 389 Directory Server"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:356
+msgid ""
+"\n"
+"                        An error was detected in the setup procedure for "
+"389\n"
+"                        Directory Server. This setup will write out stderr "
+"and\n"
+"                        stdout to /var/log/kolab/setup.error.log and\n"
+"                        /var/log/kolab/setup.out.log respectively, before "
+"it\n"
+"                        exits.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:373
+msgid "Setup DS stdout:"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:376
+msgid "Setup DS stderr:"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:402
+msgid "Could not copy the LDAP extensions for Kolab"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:405
+msgid "Could not find the ldap Kolab schema file"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:417
+msgid "Could not start the directory server service."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:431
+msgid ""
+"\n"
+"                        Please supply a Cyrus Administrator password. This\n"
+"                        password is used by Kolab to execute administrative\n"
+"                        tasks in Cyrus IMAP. You may also need the password\n"
+"                        yourself to troubleshoot Cyrus IMAP and/or perform\n"
+"                        other administrative tasks against Cyrus IMAP "
+"directly.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:441
+msgid "Cyrus Administrator password"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:448
+msgid ""
+"\n"
+"                        Please supply a Kolab Service account password. "
+"This\n"
+"                        account is used by various services such as "
+"Postfix,\n"
+"                        and Roundcube, as anonymous binds to the LDAP "
+"server\n"
+"                        will not be allowed.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:457
+msgid "Kolab Service password"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:467
+msgid "Writing out configuration to kolab.conf"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:481
+msgid "Inserting service users into LDAP."
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:555
+msgid "Writing out cn=kolab,cn=config"
+msgstr ""
+
+#. TODO: Add kolab-admin role
+#. TODO: Assign kolab-admin admin ACLs
+#: ../pykolab/setup/setup_ldap.py:579
+#, python-format
+msgid "Adding domain %s to list of domains for this deployment"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:607
+msgid "Disabling anonymous binds"
+msgstr ""
+
+#. TODO: Ensure the uid attribute is unique
+#. TODO^2: Consider renaming the general "attribute uniqueness to "uid attribute uniqueness"
+#: ../pykolab/setup/setup_ldap.py:615
+msgid "Enabling attribute uniqueness plugin"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:621
+msgid "Enabling referential integrity plugin"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:627
+msgid "Enabling and configuring account policy plugin"
+msgstr ""
+
+#. TODO: Add kolab-admin role
+#: ../pykolab/setup/setup_ldap.py:642
+msgid "Adding the kolab-admin role"
+msgstr ""
+
+#. TODO: User writeable attributes on root_dn
+#: ../pykolab/setup/setup_ldap.py:653
+#, python-format
+msgid "Setting access control to %s"
+msgstr ""
+
+#: ../pykolab/setup/setup_ldap.py:679
+msgid "Could not start and configure to start on boot, the "
+msgstr ""
+
+#: ../pykolab/setup/setup_mta.py:41
+msgid "Setup MTA."
+msgstr ""
+
+#: ../pykolab/setup/setup_mta.py:317 ../pykolab/setup/setup_php.py:106
+#, python-format
+msgid "Setting key %r to %r"
+msgstr ""
+
+#: ../pykolab/setup/setup_mta.py:350
+msgid "Could not write out Postfix configuration file /etc/postfix/master.cf"
+msgstr ""
+
+#: ../pykolab/setup/setup_mta.py:397
+msgid "Could not write out Amavis configuration file amavisd.conf"
+msgstr ""
+
+#: ../pykolab/setup/setup_mta.py:405
+msgid "Not writing out any configuration for Amavis."
+msgstr ""
+
+#: ../pykolab/setup/setup_mta.py:437
+msgid "Could not start the postfix, clamav and amavisd services services."
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:39
+msgid "Setup MySQL."
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:49
+msgid "Could not start the MySQL database service."
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:71
+msgid "What MySQL server are we setting up?"
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:75
+msgid ""
+"\n"
+"                        Please supply the root password for MySQL, so we can "
+"set\n"
+"                        up user accounts for other components that use "
+"MySQL.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:82 ../pykolab/setup/setup_mysql.py:99
+#: ../pykolab/setup/setup_roundcube.py:183
+#: ../pykolab/setup/setup_syncroton.py:63
+msgid "MySQL root password"
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:88
+msgid ""
+"\n"
+"                        Please supply a root password for MySQL. This "
+"password\n"
+"                        will be the administrative user for this MySQL "
+"server,\n"
+"                        and it should be kept a secret. After this setup "
+"process\n"
+"                        has completed, Kolab is going to discard and forget\n"
+"                        about this password, but you will need it for\n"
+"                        administrative tasks in MySQL.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:139
+msgid ""
+"\n"
+"                        Please supply a password for the MySQL user "
+"'kolab'.\n"
+"                        This password will be used by Kolab services, such "
+"as\n"
+"                        the Web Administration Panel.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:147
+msgid "MySQL kolab password"
+msgstr ""
+
+#: ../pykolab/setup/setup_mysql.py:165
+msgid "Could not find the MySQL Kolab schema file"
+msgstr ""
+
+#: ../pykolab/setup/setup_php.py:42
+msgid "PHP Options"
+msgstr ""
+
+#: ../pykolab/setup/setup_php.py:49
+msgid "Specify the timezone for PHP."
+msgstr ""
+
+#: ../pykolab/setup/setup_php.py:57
+msgid "Specify the path to the php.ini file used with the webserver."
+msgstr ""
+
+#: ../pykolab/setup/setup_php.py:61
+msgid "Setup PHP."
+msgstr ""
+
+#: ../pykolab/setup/setup_php.py:66
+msgid ""
+"\n"
+"                        Please supply the timezone PHP should be using.\n"
+"                        You have to use a Continent or Country / City "
+"locality name\n"
+"                        like 'Europe/Berlin', but not just 'CEST'.\n"
+"                    "
+msgstr ""
+
+#: ../pykolab/setup/setup_php.py:74
+msgid "Timezone ID"
+msgstr ""
+
+#: ../pykolab/setup/setup_php.py:80
+#, python-format
+msgid "Cannot configure PHP through %r (No such file or directory)"
+msgstr ""
+
+#: ../pykolab/setup/setup_php.py:91
+msgid "Could not find PHP configuration file php.ini"
+msgstr ""
+
+#: ../pykolab/setup/setup_roundcube.py:44
+msgid "Setup Roundcube."
+msgstr ""
+
+#: ../pykolab/setup/setup_roundcube.py:48
+msgid ""
+"\n"
+"                    Please supply a password for the MySQL user "
+"'roundcube'.\n"
+"                    This password will be used by the Roundcube webmail\n"
+"                    interface.\n"
+"                "
+msgstr ""
+
+#: ../pykolab/setup/setup_roundcube.py:56
+msgid "MySQL roundcube password"
+msgstr ""
+
+#: ../pykolab/setup/setup_roundcube.py:120
+#, python-format
+msgid "Using template file %r"
+msgstr ""
+
+#: ../pykolab/setup/setup_roundcube.py:127
+#, python-format
+msgid "Successfully compiled template %r, writing out to %r"
+msgstr ""
+
+#: ../pykolab/setup/setup_roundcube.py:228
+#: ../pykolab/setup/setup_syncroton.py:93
+msgid "Could not start the webserver server service."
+msgstr ""
+
+#: ../pykolab/setup/setup_syncroton.py:40
+msgid "Setup Syncroton."
+msgstr ""
+
+#. start_max = (int)(time.time())
+#: ../pykolab/telemetry.py:588
+#, python-format
+msgid "Expiring sessions that started before or on %d"
+msgstr ""
+
+#: ../pykolab/telemetry.py:601
+#, python-format
+msgid "Expiring session ID: %d"
+msgstr ""
+
+#: ../pykolab/telemetry.py:620
+#, python-format
+msgid "Session with ID %d expired from database"
+msgstr ""
+
+#: ../pykolab/telemetry.py:646
+#, python-format
+msgid "Operational Error in telemetry database: %s"
+msgstr ""
+
+#: ../pykolab/telemetry.py:652
+msgid "No database available"
+msgstr ""
+
+#: ../pykolab/utils.py:62 ../pykolab/utils.py:64
+#, python-format
+msgid "Confirm %s: "
+msgstr ""
+
+#: ../pykolab/utils.py:67
+msgid "Incorrect confirmation. "
+msgstr ""
+
+#: ../pykolab/utils.py:72 ../pykolab/utils.py:77
+#, python-format
+msgid "%s: "
+msgstr ""
+
+#: ../pykolab/utils.py:74 ../pykolab/utils.py:79
+#, python-format
+msgid "%s [%s]: "
+msgstr ""
+
+#: ../pykolab/utils.py:124
+msgid "Please answer 'yes' or 'no'."
+msgstr ""
+
+#: ../pykolab/utils.py:164
+msgid "Choice"
+msgstr ""
+
+#: ../pykolab/utils.py:167
+msgid "Choice (type '?' for options)"
+msgstr ""
+
+#: ../pykolab/utils.py:268
+#, python-format
+msgid "Could not change the permissions on %s"
+msgstr ""
+
+#: ../pykolab/utils.py:479
+#, python-format
+msgid "Transliterating string %r with locale %r"
+msgstr ""
+
+#: ../pykolab/utils.py:487
+msgid "Attempting to set locale"
+msgstr ""
+
+#: ../pykolab/utils.py:489
+msgid "Success setting locale"
+msgstr ""
+
+#: ../pykolab/utils.py:491
+msgid "Failure to set locale"
+msgstr ""
+
+#: ../pykolab/utils.py:499
+#, python-format
+msgid "Executing '%s | %s'"
+msgstr ""
+
+#: ../pykolab/utils.py:510
+#, python-format
+msgid "Could not translate %s using locale %s"
+msgstr ""
+
+#: ../pykolab/wap_client/__init__.py:320
+#, python-format
+msgid "Requesting %r with params %r"
+msgstr ""
+
+#: ../pykolab/wap_client/__init__.py:328
+#, python-format
+msgid "Got response: %r"
+msgstr ""
+
+#. Some data is not JSON
+#: ../pykolab/wap_client/__init__.py:334
+msgid "Response data is not JSON"
+msgstr ""
+
+#. support integer values, too
+#: ../pykolab/xml/attendee.py:9 ../pykolab/xml/attendee.py:17
+msgid "Needs Action"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:10 ../pykolab/xml/attendee.py:18
+msgid "Accepted"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:11 ../pykolab/xml/attendee.py:19
+msgid "Declined"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:12 ../pykolab/xml/attendee.py:20
+msgid "Tentatively Accepted"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:13 ../pykolab/xml/attendee.py:21
+msgid "Delegated"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:14
+msgid "Completed"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:15
+msgid "In Process"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:108 ../pykolab/xml/attendee.py:130
+msgid "Not a valid attendee"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:115
+msgid "No valid delegator references found"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:135
+msgid "No valid delegatee references found"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:180
+#, python-format
+msgid "Invalid cutype %r"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:192
+#, python-format
+msgid "Invalid participant status %r"
+msgstr ""
+
+#: ../pykolab/xml/attendee.py:200
+#, python-format
+msgid "Invalid role %r"
+msgstr ""
+
+#: ../pykolab/xml/event.py:100 ../pykolab/xml/event.py:708
+#: ../pykolab/xml/event.py:751
+msgid "Event start needs datetime.date or datetime.datetime instance"
+msgstr ""
+
+#: ../pykolab/xml/event.py:241
+#, python-format
+msgid "No attendee with email or name %r"
+msgstr ""
+
+#: ../pykolab/xml/event.py:249
+#, python-format
+msgid "Invalid argument value attendee %r, must be basestring or Attendee"
+msgstr ""
+
+#: ../pykolab/xml/event.py:255
+#, python-format
+msgid "No attendee with email %r"
+msgstr ""
+
+#: ../pykolab/xml/event.py:261
+#, python-format
+msgid "No attendee with name %r"
+msgstr ""
+
+#: ../pykolab/xml/event.py:426
+msgid "Invalid participant status"
+msgstr ""
+
+#: ../pykolab/xml/event.py:542
+#, python-format
+msgid "Invalid status %r"
+msgstr ""
+
+#: ../pykolab/xml/event.py:550
+#, python-format
+msgid "Invalid classification %r"
+msgstr ""
+
+#: ../pykolab/xml/event.py:577
+msgid "Event end needs datetime.date or datetime.datetime instance"
+msgstr ""
+
+#: ../pykolab/xml/event.py:761
+#, python-format
+msgid "Invalid status set: %r"
+msgstr ""
+
+#: ../pykolab/xml/event.py:923
+msgid "No sender specified"
+msgstr ""
+
+#: ../pykolab/xml/event.py:932
+#, python-format
+msgid "Invitation for %s was %s"
+msgstr ""
+
+#: ../pykolab/xml/event.py:937
+msgid "This is an automated response to one of your event requests."
+msgstr ""
+
+#: ../saslauthd/__init__.py:99
+#, python-format
+msgid "Could not create %r: %r"
+msgstr ""
+
+#: ../saslauthd/__init__.py:137 ../saslauthd/__init__.py:145
+#: ../wallace/__init__.py:403 ../wallace/__init__.py:412
+msgid "Traceback occurred, please report a bug at http://bugzilla.kolabsys.com"
+msgstr ""
+
+#: ../saslauthd/__init__.py:185
+msgid "kolab-saslauthd could not accept "
+msgstr ""
+
+#: ../saslauthd/__init__.py:190
+msgid "Maximum tries exceeded, exiting"
+msgstr ""
+
+#: ../tests/functional/test_wallace/test_005_resource_invitation.py:190
+#: ../wallace/module_resources.py:879
+#, python-format
+msgid "Reservation Request for %(summary)s was %(status)s"
+msgstr ""
+
+#. check notification message sent to resource owner (jane)
+#: ../tests/functional/test_wallace/test_005_resource_invitation.py:605
+#: ../tests/functional/test_wallace/test_005_resource_invitation.py:621
+#: ../wallace/module_resources.py:954
+#, python-format
+msgid "Booking for %s has been %s"
+msgstr ""
+
+#: ../tests/functional/test_wallace/test_007_invitationpolicy.py:146
+#: ../tests/functional/test_wallace/test_007_invitationpolicy.py:720
+#: ../wallace/module_invitationpolicy.py:374
+#, python-format
+msgid "\"%(summary)s\" has been %(status)s"
+msgstr ""
+
+#. check for notification message
+#. this notification should be suppressed until mark has replied, too
+#. this triggers an additional notification
+#: ../tests/functional/test_wallace/test_007_invitationpolicy.py:616
+#: ../tests/functional/test_wallace/test_007_invitationpolicy.py:622
+#: ../tests/functional/test_wallace/test_007_invitationpolicy.py:635
+#: ../wallace/module_invitationpolicy.py:925
+#, python-format
+msgid "\"%s\" has been updated"
+msgstr ""
+
+#: ../tests/functional/test_wallace/test_007_invitationpolicy.py:627
+#: ../tests/functional/test_wallace/test_007_invitationpolicy.py:639
+msgid "PENDING"
+msgstr ""
+
+#: ../wallace/__init__.py:57
+#, python-format
+msgid "Wallace modules: %r"
+msgstr ""
+
+#: ../wallace/__init__.py:69
+#, python-format
+msgid "Module %s.execute() failed on message %r with error: %s"
+msgstr ""
+
+#: ../wallace/__init__.py:78
+#, python-format
+msgid "Worker process %s initializing"
+msgstr ""
+
+#: ../wallace/__init__.py:100
+msgid "Bind address for Wallace."
+msgstr ""
+
+#: ../wallace/__init__.py:126
+msgid "Port that Wallace is supposed to use."
+msgstr ""
+
+#: ../wallace/__init__.py:177
+#, python-format
+msgid "Could not bind to socket on port %d on bind "
+msgstr ""
+
+#: ../wallace/__init__.py:189
+msgid "Could not shut down socket"
+msgstr ""
+
+#: ../wallace/__init__.py:253
+msgid "Accepted connection"
+msgstr ""
+
+#: ../wallace/__init__.py:428
+#, python-format
+msgid "Could not write pid file %s"
+msgstr ""
+
+#: ../wallace/module_footer.py:60 ../wallace/module_gpgencrypt.py:60
+#: ../wallace/module_invitationpolicy.py:168 ../wallace/module_optout.py:61
+#: ../wallace/module_resources.py:120
+#, python-format
+msgid "Issuing callback after processing to stage %s"
+msgstr ""
+
+#: ../wallace/module_footer.py:61 ../wallace/module_gpgencrypt.py:61
+#: ../wallace/module_invitationpolicy.py:170 ../wallace/module_optout.py:62
+#: ../wallace/module_resources.py:126
+#, python-format
+msgid "Testing cb_action_%s()"
+msgstr ""
+
+#: ../wallace/module_footer.py:63 ../wallace/module_gpgencrypt.py:63
+#: ../wallace/module_invitationpolicy.py:172 ../wallace/module_optout.py:64
+#: ../wallace/module_resources.py:129
+#, python-format
+msgid "Attempting to execute cb_action_%s()"
+msgstr ""
+
+#: ../wallace/module_footer.py:67
+#, python-format
+msgid "Executing module footer for %r, %r"
+msgstr ""
+
+#: ../wallace/module_gpgencrypt.py:66
+#, python-format
+msgid "Executing module gpgencrypt for %r, %r"
+msgstr ""
+
+#: ../wallace/module_gpgencrypt.py:98
+msgid "Message is already encrypted (app/pgp-enc content-type)"
+msgstr ""
+
+#: ../wallace/module_gpgencrypt.py:102
+msgid "Message already encrypted by main content-type header"
+msgstr ""
+
+#: ../wallace/module_gpgencrypt.py:131
+msgid ""
+"Configured to encrypt to a key not configured, and strict policy enabled. "
+"Bailing out."
+msgstr ""
+
+#: ../wallace/module_gpgencrypt.py:134
+msgid ""
+"Configured to encrypt to a key not configured, but continuing anyway (see "
+"'gpgencrypt_strict')."
+msgstr ""
+
+#: ../wallace/module_gpgencrypt.py:171
+#, python-format
+msgid "Recipients: %r"
+msgstr ""
+
+#: ../wallace/module_gpgencrypt.py:183
+#, python-format
+msgid "Current keys: %r"
+msgstr ""
+
+#: ../wallace/module_gpgencrypt.py:188
+#, python-format
+msgid "Retrieving key for recipient: %r"
+msgstr ""
+
+#: ../wallace/module_gpgencrypt.py:192 ../wallace/module_gpgencrypt.py:208
+#, python-format
+msgid "Found matching address %r"
+msgstr ""
+
+#: ../wallace/module_gpgencrypt.py:200
+#, python-format
+msgid "Found matching address %r in remote keys"
+msgstr ""
+
+#: ../wallace/module_gpgencrypt.py:232
+#, python-format
+msgid "An error occurred: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:154
+#, python-format
+msgid "Invitation policy called for %r, %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:211
+#: ../wallace/module_resources.py:169
+#, python-format
+msgid "Failed to parse iTip events from message: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:215
+msgid ""
+"Message is not an iTip message or does not contain any (valid) iTip events."
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:219
+#, python-format
+msgid ""
+"iTip events attached to this message contain the following information: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:232
+#, python-format
+msgid "No itips, no users, pass along %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:235
+#, python-format
+msgid "iTips, but no users, pass along %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:255
+#, python-format
+msgid "No user attendee matching envelope recipient %s, skip message"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:259
+#, python-format
+msgid "Receiving user: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:284
+#, python-format
+msgid "Apply invitation policy %r for domain %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:295
+#, python-format
+msgid "Ignoring '%s' iTip method"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:299
+#, python-format
+msgid "iTip message %r consumed by the invitationpolicy module"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:315
+msgid "Pass invitation for manual processing"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:320
+#, python-format
+msgid "Receiving Attendee: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:339
+#, python-format
+msgid "Existing event: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:350
+#, python-format
+msgid "Precondition for event %r fulfilled: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:386
+#, python-format
+msgid "No RSVP for recipient %r requested"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:412
+msgid "Pass reply for manual processing"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:419
+#, python-format
+msgid "Sender Attendee: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:431
+#, python-format
+msgid ""
+"The iTip reply sequence (%r) doesn't match the referred event version (%r). "
+"Forwarding to Inbox."
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:437
+#, python-format
+msgid "Auto-updating event %r on iTip REPLY"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:459
+#: ../wallace/module_invitationpolicy.py:488
+msgid ""
+"The event referred by this reply was not found in the user's calendars. "
+"Forwarding to Inbox."
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:472
+msgid "Pass cancellation for manual processing"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:517
+#, python-format
+msgid "Checking if email address %r belongs to a local user"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:522
+#, python-format
+msgid "User DN: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:524
+#, python-format
+msgid "No user record(s) found for %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:577
+#, python-format
+msgid "User record doesn't have the mailbox attribute %r set"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:590
+#, python-format
+msgid "IMAP proxy authentication failed: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:612
+#, python-format
+msgid "List calendar folders for user %r: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:628
+#, python-format
+msgid "IMAP metadata for %r: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:658
+#, python-format
+msgid "Searching folder %r for event %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:670
+#: ../wallace/module_invitationpolicy.py:709
+#: ../wallace/module_resources.py:486
+#, python-format
+msgid "Failed to parse event from message %s/%s: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:696
+#, python-format
+msgid "Listing events from folder %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:715
+#, python-format
+msgid "Existing event %r conflicts with invitation %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:722
+#: ../wallace/module_resources.py:344
+#, python-format
+msgid "start: %r, end: %r, total: %r, messages: %d"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:748
+#, python-format
+msgid "%r is locked, waiting..."
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:811
+#, python-format
+msgid "Failed to save event: no calendar folder found for user %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:814
+#, python-format
+msgid "Save event %r to user calendar %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:827
+#, python-format
+msgid "Failed to save event to user calendar at %r: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:843
+#, python-format
+msgid "Delete event %r in %r: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:863
+#, python-format
+msgid "Compose participation status summary for event %r to user %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:901
+#, python-format
+msgid ""
+"Waiting for more automated replies (got %d of %d); skipping notification"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:998
+#, python-format
+msgid "Updated %s's copy of %r: %r"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:1001
+#, python-format
+msgid "Attendee %s's copy of %r not found"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:1004
+#, python-format
+msgid "Attendee %r not found in LDAP"
+msgstr ""
+
+#: ../wallace/module_invitationpolicy.py:1008
+#, python-format
+msgid ""
+"\n"
+"        %(name)s has %(status)s your invitation for %(summary)s.\n"
+"\n"
+"        *** This is an automated response sent by the Kolab Invitation "
+"system ***\n"
+"    "
+msgstr ""
+
+#. modules.next_module('optout')
+#: ../wallace/module_optout.py:70
+#, python-format
+msgid "Consulting opt-out service for %r, %r"
+msgstr ""
+
+#: ../wallace/module_optout.py:96
+#, python-format
+msgid "Running opt-out consult from envelope sender '%s "
+msgstr ""
+
+#: ../wallace/module_optout.py:160
+#, python-format
+msgid "Attempting to execute cb_action_%s(%r, %r)"
+msgstr ""
+
+#: ../wallace/module_optout.py:181
+#, python-format
+msgid "Could not send request to optout_url %s"
+msgstr ""
+
+#: ../wallace/module_resources.py:110
+#, python-format
+msgid "Resource Management called for %r, %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:174
+msgid "Message is not an iTip message or does not contain any "
+msgstr ""
+
+#: ../wallace/module_resources.py:182
+msgid "iTip events attached to this message contain the "
+msgstr ""
+
+#: ../wallace/module_resources.py:205
+msgid "Not an iTip message, but sent to resource nonetheless. Reject message"
+msgstr ""
+
+#: ../wallace/module_resources.py:213
+#, python-format
+msgid "No itips, no resources, pass along %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:216
+#, python-format
+msgid "iTips, but no resources, pass along %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:225
+#, python-format
+msgid "No resource attendees matching envelope recipient %s, Reject message"
+msgstr ""
+
+#: ../wallace/module_resources.py:234
+#, python-format
+msgid "Resources: %r; %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:244
+#, python-format
+msgid "Receiving Resource: %r; %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:252
+#, python-format
+msgid "Recipient %r is non-participant, ignoring message"
+msgstr ""
+
+#: ../wallace/module_resources.py:279
+#, python-format
+msgid "Accept invitation for individual resource %r / %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:308
+#, python-format
+msgid "Delegate invitation for resource collection %r to %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:340
+#, python-format
+msgid "Failed to read resource calendar for %r: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:350
+#, python-format
+msgid "Polling for resource %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:353
+#, python-format
+msgid "Resource %r has been popped from the list"
+msgstr ""
+
+#: ../wallace/module_resources.py:357
+msgid "Resource is a collection"
+msgstr ""
+
+#: ../wallace/module_resources.py:368
+#, python-format
+msgid "Removed conflicting resources from %r: (%r) => %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:380
+#, python-format
+msgid "Conflicting events: %r for resource %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:397
+#, python-format
+msgid "Delegate to another resource collection member: %r to %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:459
+#, python-format
+msgid "Checking events in resource folder %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:475
+#, python-format
+msgid "Fetching message UID %r from folder %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:498
+#, python-format
+msgid "Event %r conflicts with event %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:525
+#, python-format
+msgid "Adding event to %r: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:573
+#, python-format
+msgid "Failed to save event to resource calendar at %r: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:590
+#, python-format
+msgid "Delete resource calendar object %r in %r: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:633
+#, python-format
+msgid "Checking if email address %r belongs to a resource (collection)"
+msgstr ""
+
+#: ../wallace/module_resources.py:641 ../wallace/module_resources.py:709
+#: ../wallace/module_resources.py:743
+#, python-format
+msgid "Resource record(s): %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:643 ../wallace/module_resources.py:711
+#: ../wallace/module_resources.py:746
+#, python-format
+msgid "No resource (collection) records found for %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:647 ../wallace/module_resources.py:715
+#: ../wallace/module_resources.py:750
+#, python-format
+msgid "Resource record: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:667
+#, python-format
+msgid "Raw itip_events: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:675
+#, python-format
+msgid "Raw set of attendees: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:683
+#, python-format
+msgid "Raw set of resources: %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:702
+#, python-format
+msgid "Checking if attendee %r is a resource (collection)"
+msgstr ""
+
+#: ../wallace/module_resources.py:718 ../wallace/module_resources.py:752
+msgid "Resource reservation made but no resource records found"
+msgstr ""
+
+#: ../wallace/module_resources.py:737
+#, python-format
+msgid "Checking if resource %r is a resource (collection)"
+msgstr ""
+
+#: ../wallace/module_resources.py:755
+msgid "The following resources are being referred to in the "
+msgstr ""
+
+#: ../wallace/module_resources.py:894
+#, python-format
+msgid ""
+"\n"
+"                *** This is an automated response, please do not reply! ***\n"
+"\n"
+"                Your reservation was delegated to \"%s\" which is available "
+"for the requested time.\n"
+"            "
+msgstr ""
+
+#: ../wallace/module_resources.py:905
+#, python-format
+msgid ""
+"\n"
+"        *** This is an automated response, please do not reply! ***\n"
+"        \n"
+"        We hereby inform you that your reservation was %s.\n"
+"    "
+msgstr ""
+
+#: ../wallace/module_resources.py:912
+#, python-format
+msgid ""
+"\n"
+"            If you have questions about this reservation, please contact\n"
+"            %s <%s> %s\n"
+"        "
+msgstr ""
+
+#: ../wallace/module_resources.py:941
+#, python-format
+msgid "Sending booking notification for event %r to %r from %r"
+msgstr ""
+
+#: ../wallace/module_resources.py:954
+msgid "failed"
+msgstr ""
+
+#: ../wallace/module_resources.py:973
+#, python-format
+msgid ""
+"\n"
+"            The resource booking for %(resource)s by %(orgname)s <%(orgemail)"
+"s> has been %(status)s for %(date)s.\n"
+"\n"
+"            *** This is an automated message, sent to you as the resource "
+"owner. ***\n"
+"        "
+msgstr ""
+
+#: ../wallace/module_resources.py:979
+#, python-format
+msgid ""
+"\n"
+"            A reservation request for %(resource)s could not be processed "
+"automatically.\n"
+"            Please contact %(orgname)s <%(orgemail)s> who requested this "
+"resource for %(date)s. Subject: %(summary)s.\n"
+"\n"
+"            *** This is an automated message, sent to you as the resource "
+"owner. ***\n"
+"        "
+msgstr ""
+
+#. This is a nested module
+#: ../wallace/modules.py:97
+#, python-format
+msgid "Module Group: %s"
+msgstr ""
+
+#: ../wallace/modules.py:108
+#, python-format
+msgid "No such module %r in modules %r (1)."
+msgstr ""
+
+#: ../wallace/modules.py:113
+#, python-format
+msgid "No such module %r in modules %r (2)."
+msgstr ""
+
+#: ../wallace/modules.py:119
+#, python-format
+msgid "Holding message in queue for manual review (%s by %s)"
+msgstr ""
+
+#: ../wallace/modules.py:122
+#, python-format
+msgid "Deferring message in %s (by module %s)"
+msgstr ""
+
+#: ../wallace/modules.py:134
+#, python-format
+msgid "The time when the message was sent: %r"
+msgstr ""
+
+#: ../wallace/modules.py:135
+#, python-format
+msgid "The time now: %r"
+msgstr ""
+
+#: ../wallace/modules.py:136
+#, python-format
+msgid "The time delta: %r"
+msgstr ""
+
+#. TODO: Send NDR back to user
+#: ../wallace/modules.py:140
+#, python-format
+msgid "Message in file %s older then 5 days, deleting"
+msgstr ""
+
+#: ../wallace/modules.py:165
+#, python-format
+msgid "Rejecting message in %s (by module %s)"
+msgstr ""
+
+#: ../wallace/modules.py:186
+#, python-format
+msgid ""
+"This is the email system Wallace at %s.\n"
+"\n"
+"I'm sorry to inform you we could not deliver the attached message\n"
+"to the following recipients:\n"
+"\n"
+"- %s\n"
+"\n"
+"Your message is being delivered to any other recipients you may have\n"
+"sent your message to. There is no need to resend the message to those\n"
+"recipients.\n"
+msgstr ""
+
+#: ../wallace/modules.py:201
+#, python-format
+msgid ""
+"X-Wallace-Module: %s\n"
+"X-Wallace-Result: REJECT\n"
+msgstr ""
+
+#: ../wallace/modules.py:260
+#, python-format
+msgid "Accepting message in %s (by module %s)"
+msgstr ""
+
+#: ../wallace/modules.py:262
+#, python-format
+msgid "Accepting message in: %r"
+msgstr ""
+
+#: ../wallace/modules.py:269
+#, python-format
+msgid "recipients: %r"
+msgstr ""
+
+#: ../wallace/modules.py:347
+#, python-format
+msgid "Module '%s' already registered"
+msgstr ""

pykolab-0.7.tar.gz/po/stamp-it Added

pykolab-0.7.tar.gz/pykolab.spec Deleted

@@ -1,405 +0,0 @@
-%{!?python_sitelib: %define python_sitelib %(python -c "from distutils.sysconfig import get_python_lib; print get_python_lib()")}
-
-%global kolab_user kolab
-%global kolab_user_id 412
-%global kolab_group kolab
-%global kolab_group_id 412
-
-%global kolabn_user kolab-n
-%global kolabn_user_id 413
-%global kolabn_group kolab-n
-%global kolabn_group_id 413
-
-%global kolabr_user kolab-r
-%global kolabr_user_id 414
-%global kolabr_group kolab-r
-%global kolabr_group_id 414
-
-Summary:            Kolab Groupware Solution
-Name:               pykolab
-Version:            0.7
-Release:            0.1%{?dist}
-License:            GPLv3+
-Group:              Applications/System
-URL:                http://kolab.org/
-Source0:            http://files.kolab.org/releases/%{name}-%{version}.tar.gz
-BuildRoot:          %{_tmppath}/%{name}-%{version}-%{release}-root
-BuildArch:          noarch
-BuildRequires:      gcc
-BuildRequires:      gettext
-BuildRequires:      glib2-devel
-BuildRequires:      intltool
-BuildRequires:      python
-BuildRequires:      python-icalendar
-BuildRequires:      python-kolabformat
-BuildRequires:      python-ldap
-BuildRequires:      python-nose
-BuildRequires:      python-pyasn1
-BuildRequires:      python-pyasn1-modules
-BuildRequires:      python-sqlalchemy
-Requires:           kolab-cli = %{version}-%{release}
-Requires:           python-ldap >= 2.4
-Requires:           python-pyasn1
-Requires:           python-pyasn1-modules
-Requires:           python-sqlalchemy
-Requires(pre):      /usr/sbin/useradd
-Requires(pre):      /usr/sbin/usermod
-Requires(pre):      /usr/sbin/groupadd
-
-%description
-Kolab enables you to easily build a groupware server as part of a
-collaborative environment.
-
-##
-## Kolab Telemetry Logging
-##
-%package telemetry
-Summary:            Kolab Telemetry Logging Capabilities
-Group:              Applications/System
-Requires:           kolab-cli = %{version}-%{release}
-
-%description telemetry
-Cyrus IMAP Telemetry logging handling capabilities for Kolab Groupware
-
-##
-## Kolab XML
-##
-%package xml
-Summary:            Kolab XML format wrapper for %{name}
-Group:              Applications/System
-Requires:           %{name} = %{version}-%{release}
-Requires:           python-kolabformat >= 0.5
-
-%description xml
-Kolab Format XML bindings wrapper for %{name}
-
-##
-## Kolab CLI
-##
-%package -n kolab-cli
-Summary:            Kolab CLI components
-Group:              Applications/System
-Requires:           %{name} = %{version}-%{release}
-Requires:           python-augeas
-Requires:           python-cheetah
-
-%description -n kolab-cli
-Kolab CLI utilities
-
-##
-## Kolab SASL Authentication Daemon
-##
-%package -n kolab-saslauthd
-Summary:            Kolab SASL Authentication Daemon
-Group:              Applications/System
-Requires:           %{name} = %{version}-%{release}
-Requires:           cyrus-sasl
-Requires:           cyrus-sasl-plain
-
-%description -n kolab-saslauthd
-Kolab SASL Authentication Daemon for multi-domain, multi-authn database deployments
-
-##
-## Kolab Server implemented in Python
-##
-%package -n kolab-server
-Summary:            Kolab Server implemented in Python
-Group:              Applications/System
-Requires:           %{name} = %{version}-%{release}
-
-%description -n kolab-server
-Kolab Server implemented in Python
-
-##
-## Kolab SMTP Access Policy for Postfix
-##
-%package -n postfix-kolab
-Summary:            Kolab SMTP Access Policy for Postfix
-Group:              Applications/System
-Requires:           postfix
-Requires:           %{name} = %{version}-%{release}
-Requires:           python-sqlalchemy
-Requires:           MySQL-python
-
-%description -n postfix-kolab
-Kolab SMTP Access Policy for Postfix
-
-##
-## Wallace
-##
-%package -n wallace
-Summary:            Kolab Content-Filter
-Group:              Applications/System
-Requires:           %{name} = %{version}-%{release}
-Requires:           python-sqlalchemy
-Requires:           MySQL-python
-Requires:           python-icalendar >= 3.0
-Requires:           %{name}-xml = %{version}-%{release}
-
-%description -n wallace
-This is the Kolab Content Filter, with plugins
-
-%prep
-%setup -q
-
-%build
-%configure
-
-%install
-rm -rf %{buildroot}
-make install DESTDIR=%{buildroot}
-
-%if 0%{?fedora} >= 15
-mkdir -p %{buildroot}/%{_unitdir}
-%{__install} -p -m 644 kolabd/kolabd.systemd %{buildroot}/%{_unitdir}/kolabd.service
-%{__install} -p -m 644 saslauthd/kolab-saslauthd.systemd %{buildroot}/%{_unitdir}/kolab-saslauthd.service
-%{__install} -p -m 644 wallace/wallace.systemd %{buildroot}/%{_unitdir}/wallace.service
-mkdir -p %{buildroot}/%{_sysconfdir}/tmpfiles.d/
-%{__install} -p -m 644 kolabd/kolabd.tmpfiles.d.conf %{buildroot}/%{_sysconfdir}/tmpfiles.d/kolabd.conf
-%{__install} -p -m 644 wallace/wallace.tmpfiles.d.conf %{buildroot}/%{_sysconfdir}/tmpfiles.d/wallace.conf
-%else
-mkdir -p %{buildroot}/%{_initddir}
-%{__install} -p -m 755 kolabd/kolabd.sysvinit %{buildroot}/%{_initrddir}/kolabd
-%{__install} -p -m 755 saslauthd/kolab-saslauthd.sysvinit %{buildroot}/%{_initrddir}/kolab-saslauthd
-%{__install} -p -m 755 wallace/wallace.sysvinit %{buildroot}/%{_initrddir}/wallace
-%endif
-
-mkdir -p %{buildroot}/%{_sysconfdir}/sysconfig
-%{__install} -p -m 644 kolabd/kolabd.sysconfig %{buildroot}/%{_sysconfdir}/sysconfig/kolabd
-%{__install} -p -m 644 saslauthd/kolab-saslauthd.sysconfig %{buildroot}/%{_sysconfdir}/sysconfig/kolab-saslauthd
-%{__install} -p -m 644 wallace/wallace.sysconfig %{buildroot}/%{_sysconfdir}/sysconfig/wallace
-
-%find_lang pykolab
-
-%pre
-# Add the kolab user and group accounts
-getent group %{kolab_group} &>/dev/null || groupadd -r %{kolab_group} -g %{kolab_group_id} &>/dev/null
-getent passwd %{kolab_user} &>/dev/null || \
-    useradd -r -u %{kolab_user_id} -g %{kolab_group} -d %{_localstatedir}/lib/%{kolab_user} -s /sbin/nologin \
-        -c "Kolab System Account" %{kolab_user} &>/dev/null || :
-
-gpasswd -a apache kolab >/dev/null 2>&1 || :
-
-getent group %{kolabn_group} &>/dev/null || groupadd -r %{kolabn_group} -g %{kolabn_group_id} &>/dev/null
-getent passwd %{kolabn_user} &>/dev/null || \
-    useradd -r -u %{kolabn_user_id} -g %{kolabn_group} -d %{_localstatedir}/lib/%{kolabn_user} -s /sbin/nologin \
-        -c "Kolab System Account (N)" %{kolabn_user} &>/dev/null || :
-    gpasswd -a %{kolabn_user} %{kolab_group} &>/dev/null || :
-
-getent group %{kolabr_group} &>/dev/null || groupadd -r %{kolabr_group} -g %{kolabr_group_id} &>/dev/null
-getent passwd %{kolabr_user} &>/dev/null || \
-    useradd -r -u %{kolabr_user_id} -g %{kolabr_group} -d %{_localstatedir}/lib/%{kolabr_user} -s /sbin/nologin \
-        -c "Kolab System Account (R)" %{kolabr_user} &>/dev/null || :
-
-# Make sure the kolab user and group is added
-getent passwd %{cyrus_admin} &>/dev/null || \
-    useradd -r -d %{_localstatedir}/lib/%{cyrus_admin} -s /sbin/nologin \
-        -c "Kolab Cyrus Administrator Account" %{cyrus_admin} &>/dev/null || :
-
-# Make sure our user has the correct home directory
-if [ $1 -gt 1 ] ; then
-    usermod -d %{_localstatedir}/lib/%{kolab_user} %{kolab_user} &>/dev/null || :
-    usermod -d %{_localstatedir}/lib/%{kolab_user} %{kolabn_user} &>/dev/null || :
-    usermod -d %{_localstatedir}/lib/%{kolab_user} %{kolabr_user} &>/dev/null || :
-fi
-
-%post -n kolab-saslauthd
-if [ $1 -eq 1 ]; then
-%if 0%{?fedora} >= 15
-    /bin/systemctl daemon-reload >/dev/null 2>&1 || :
-%else
-    /sbin/chkconfig --add kolab-saslauthd
-%endif
-else
-    /sbin/service kolab-saslauthd condrestart
-fi
-
-%preun -n kolab-saslauthd
-if [ $1 = 0 ]; then
-%if 0%{?fedora} >= 15
-    /bin/systemctl --no-reload disable kolab-saslauthd.service >/dev/null 2>&1 || :
-    /bin/systemctl stop kolab-saslauthd.service >/dev/null 2>&1 || :
-%else
-    /sbin/service kolab-saslauthd stop > /dev/null 2>&1
-    /sbin/chkconfig --del kolab-saslauthd
-%endif
-fi
-
-%post -n kolab-server
-if [ $1 -eq  1 ] ; then
-%if 0%{?fedora} >= 15
-    /bin/systemctl daemon-reload >/dev/null 2>&1 || :
-%else
-    /sbin/chkconfig --add kolabd
-%endif
-fi
-
-%preun -n kolab-server
-if [ $1 = 0 ]; then
-%if 0%{?fedora} >= 15
-    /bin/systemctl --no-reload disable kolabd.service >/dev/null 2>&1 || :
-    /bin/systemctl stop kolabd.service >/dev/null 2>&1 || :
-%else
-    /sbin/service kolabd stop > /dev/null 2>&1
-    /sbin/chkconfig --del kolabd
-%endif
-fi
-
-%post -n wallace
-if [ $1 -eq  1 ] ; then
-%if 0%{?fedora} >= 15
-    /bin/systemctl daemon-reload >/dev/null 2>&1 || :
-%else
-    chkconfig --add wallace
-%endif
-else
-%if 0%{?fedora} >= 15
-    /bin/systemctl reload-or-try-restart wallace.service
-%else
-    /sbin/service wallace condrestart
-%endif
-fi
-
-%preun -n wallace
-if [ $1 = 0 ]; then
-%if 0%{?fedora} >= 15
-    /bin/systemctl --no-reload disable wallace.service
-    /bin/systemctl stop wallace.service
-%else
-    /sbin/service wallace stop > /dev/null 2>&1
-    /sbin/chkconfig --del wallace
-%endif
-fi
-
-%check
-# RHEL's python unittest does not have assertIsInstance()
-%if 0%{?rhel} > 1
-nosetests -v tests/unit/ ||:
-%else
-nosetests -v tests/unit/
-%endif
-
-%clean
-rm -rf %{buildroot}
-
-%files -f pykolab.lang
-%defattr(-,root,root,-)
-%doc AUTHORS ChangeLog COPYING README README.tests
-%doc conf/kolab.conf
-%attr(0640,kolab-n,kolab) %config(noreplace) %{_sysconfdir}/kolab/kolab.conf
-%dir %{python_sitelib}/pykolab/
-%exclude %{python_sitelib}/pykolab/telemetry.*
-%{python_sitelib}/pykolab/*.py
-%{python_sitelib}/pykolab/*.pyc
-%{python_sitelib}/pykolab/*.pyo
-%{python_sitelib}/pykolab/auth/
-%{python_sitelib}/pykolab/conf/
-%{python_sitelib}/pykolab/imap/
-%dir %{python_sitelib}/pykolab/plugins/
-%{python_sitelib}/pykolab/plugins/*.py
-%{python_sitelib}/pykolab/plugins/*.pyc
-%{python_sitelib}/pykolab/plugins/*.pyo
-%{python_sitelib}/pykolab/plugins/defaultfolders
-%{python_sitelib}/pykolab/plugins/dynamicquota
-%{python_sitelib}/pykolab/plugins/recipientpolicy
-# No sieve script management without our modified version of
-# python-sievelib
-%exclude %{python_sitelib}/pykolab/plugins/sievemgmt
-%{python_sitelib}/kolab/
-%{python_sitelib}/cyruslib.py*
-%attr(0775,kolab,kolab-n) %dir %{_localstatedir}/lib/kolab/
-%attr(0775,kolab,kolab-n) %dir %{_localstatedir}/log/kolab/
-
-%files telemetry
-%defattr(-,root,root,-)
-%doc AUTHORS ChangeLog COPYING
-%{_sbindir}/kolab_parse_telemetry
-#%{python_sitelib}/pykolab/cli/commandgroups/telemetry.py
-%{python_sitelib}/pykolab/telemetry.*
-%{python_sitelib}/pykolab/cli/telemetry/
-
-%files xml
-%dir %{python_sitelib}/pykolab/xml
-%{python_sitelib}/pykolab/xml/*.py
-%{python_sitelib}/pykolab/xml/*.pyc
-%{python_sitelib}/pykolab/xml/*.pyo
-
-%files -n kolab-cli
-%defattr(-,root,root,-)
-%{_sbindir}/kolab
-%{_sbindir}/kolab-conf
-%{_sbindir}/setup-kolab
-%dir %{_sysconfdir}/kolab/templates
-%{_datadir}/kolab/templates
-%dir %{python_sitelib}/pykolab/cli/
-%{python_sitelib}/pykolab/cli/*.py
-%{python_sitelib}/pykolab/cli/*.pyc
-%{python_sitelib}/pykolab/cli/*.pyo
-%dir %{python_sitelib}/pykolab/cli/wap
-%{python_sitelib}/pykolab/cli/wap/*.py
-%{python_sitelib}/pykolab/cli/wap/*.pyc
-%{python_sitelib}/pykolab/cli/wap/*.pyo
-%dir %{python_sitelib}/pykolab/setup/
-%{python_sitelib}/pykolab/setup/*.py
-%{python_sitelib}/pykolab/setup/*.pyc
-%{python_sitelib}/pykolab/setup/*.pyo
-%dir %{python_sitelib}/pykolab/wap_client/
-%{python_sitelib}/pykolab/wap_client/*.py
-%{python_sitelib}/pykolab/wap_client/*.pyc
-%{python_sitelib}/pykolab/wap_client/*.pyo
-# No sieve script management without our modified version of
-# python-sievelib
-%exclude %{python_sitelib}/pykolab/cli/sieve
-
-%files -n kolab-saslauthd
-%defattr(-,root,root,-)
-%doc AUTHORS ChangeLog COPYING
-%if 0%{?fedora} >= 15
-%{_unitdir}/kolab-saslauthd.service
-%else
-%{_initrddir}/kolab-saslauthd
-%endif
-%config(noreplace) %{_sysconfdir}/sysconfig/kolab-saslauthd
-%{_sbindir}/kolab-saslauthd
-%{python_sitelib}/saslauthd/
-%dir %{_localstatedir}/run/kolab-saslauthd
-%dir %{_localstatedir}/run/saslauthd
-
-%files -n kolab-server
-%defattr(-,root,root,-)
-%doc AUTHORS ChangeLog COPYING
-%if 0%{?fedora} >= 15
-%{_unitdir}/kolabd.service
-%{_sysconfdir}/tmpfiles.d/kolabd.conf
-%else
-%{_initrddir}/kolabd
-%endif
-%config(noreplace) %{_sysconfdir}/sysconfig/kolabd
-%{_sbindir}/kolabd
-%{python_sitelib}/kolabd/
-%attr(0770,kolab,kolab) %dir %{_localstatedir}/run/kolabd
-
-%files -n postfix-kolab
-%defattr(-,root,root,-)
-%doc AUTHORS ChangeLog COPYING
-%{_libexecdir}/postfix/kolab_smtp_access_policy
-
-%files -n wallace
-%defattr(-,root,root,-)
-%doc AUTHORS ChangeLog COPYING
-%if 0%{?fedora} >= 15
-%{_unitdir}/wallace.service
-%{_sysconfdir}/tmpfiles.d/wallace.conf
-%else
-%{_initrddir}/wallace
-%endif
-%{_sysconfdir}/sysconfig/wallace
-%{_sbindir}/wallaced
-%{python_sitelib}/wallace
-%attr(0700,%{kolab_user},%{kolab_group}) %dir %{_var}/spool/pykolab
-%attr(0700,%{kolab_user},%{kolab_group}) %dir %{_var}/spool/pykolab/wallace
-
-%changelog
-* Wed Jul 30 2014 Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com> 0.7-0.1
-- Initial package of new upstream version
-

pykolab-0.7.tar.gz/pykolab/Makefile.am Changed

pykolab-0.7.tar.gz/pykolab/Makefile.in Deleted

@@ -1,1430 +0,0 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-@ENTERPRISE_TRUE@am__append_1 = conf/entitlement.py
-subdir = pykolab
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(srcdir)/constants.py.in $(pykolab_PYTHON) \
-	$(pykolab_auth_PYTHON) $(pykolab_auth_ldap_PYTHON) \
-	$(pykolab_cli_PYTHON) $(pykolab_clisieve_PYTHON) \
-	$(pykolab_clitelemetry_PYTHON) $(pykolab_cliwap_PYTHON) \
-	$(am__pykolab_conf_PYTHON_DIST) $(pykolab_imap_PYTHON) \
-	$(pykolab_plugins_PYTHON) \
-	$(pykolab_plugins_defaultfolders_PYTHON) \
-	$(pykolab_plugins_dynamicquota_PYTHON) \
-	$(pykolab_plugins_recipientpolicy_PYTHON) \
-	$(pykolab_plugins_sievemgmt_PYTHON) $(pykolab_setup_PYTHON) \
-	$(pykolab_wapclient_PYTHON) $(pykolab_xml_PYTHON) \
-	$(top_srcdir)/py-compile
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES = constants.py
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__py_compile = PYTHON=$(PYTHON) $(SHELL) $(py_compile)
-am__installdirs = "$(DESTDIR)$(pykolabdir)" \
-	"$(DESTDIR)$(pykolab_authdir)" \
-	"$(DESTDIR)$(pykolab_auth_ldapdir)" \
-	"$(DESTDIR)$(pykolab_clidir)" \
-	"$(DESTDIR)$(pykolab_clisievedir)" \
-	"$(DESTDIR)$(pykolab_clitelemetrydir)" \
-	"$(DESTDIR)$(pykolab_cliwapdir)" \
-	"$(DESTDIR)$(pykolab_confdir)" "$(DESTDIR)$(pykolab_imapdir)" \
-	"$(DESTDIR)$(pykolab_pluginsdir)" \
-	"$(DESTDIR)$(pykolab_plugins_defaultfoldersdir)" \
-	"$(DESTDIR)$(pykolab_plugins_dynamicquotadir)" \
-	"$(DESTDIR)$(pykolab_plugins_recipientpolicydir)" \
-	"$(DESTDIR)$(pykolab_plugins_sievemgmtdir)" \
-	"$(DESTDIR)$(pykolab_setupdir)" \
-	"$(DESTDIR)$(pykolab_wapclientdir)" \
-	"$(DESTDIR)$(pykolab_xmldir)"
-am__pep3147_tweak = \
-  sed -e 's|\.py$$||' -e 's|[^/]*$$|__pycache__/&.*.py|'
-am__pykolab_conf_PYTHON_DIST = conf/defaults.py conf/__init__.py \
-	conf/entitlement.py
-py_compile = $(top_srcdir)/py-compile
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALL_LINGUAS = @ALL_LINGUAS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DATESTAMP = @DATESTAMP@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GMOFILES = @GMOFILES@
-GMSGFMT = @GMSGFMT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLLIBS = @INTLLIBS@
-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
-INTLTOOL_MERGE = @INTLTOOL_MERGE@
-INTLTOOL_PERL = @INTLTOOL_PERL@
-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
-INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
-INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
-INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
-INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGFMT_OPTS = @MSGFMT_OPTS@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POFILES = @POFILES@
-POSUB = @POSUB@
-PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
-PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
-PYTHON = @PYTHON@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RELEASE = @RELEASE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-intltool__v_merge_options_ = @intltool__v_merge_options_@
-intltool__v_merge_options_0 = @intltool__v_merge_options_0@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-pykolabdir = $(pythondir)/$(PACKAGE)
-pykolab_PYTHON = $(wildcard *.py)
-pykolab_authdir = $(pythondir)/$(PACKAGE)/auth
-pykolab_auth_PYTHON = \
-	auth/__init__.py
-
-pykolab_auth_ldapdir = $(pythondir)/$(PACKAGE)/auth/ldap
-pykolab_auth_ldap_PYTHON = \
-	auth/ldap/__init__.py \
-	auth/ldap/auth_cache.py \
-	auth/ldap/cache.py \
-	auth/ldap/syncrepl.py
-
-pykolab_clidir = $(pythondir)/$(PACKAGE)/cli
-pykolab_cli_PYTHON = \
-	$(wildcard cli/*.py)
-
-pykolab_clisievedir = $(pythondir)/$(PACKAGE)/cli/sieve
-pykolab_clisieve_PYTHON = \
-	$(wildcard cli/sieve/*.py)
-
-pykolab_clitelemetrydir = $(pythondir)/$(PACKAGE)/cli/telemetry
-pykolab_clitelemetry_PYTHON = \
-	$(wildcard cli/telemetry/*.py)
-
-pykolab_cliwapdir = $(pythondir)/$(PACKAGE)/cli/wap
-pykolab_cliwap_PYTHON = \
-	$(wildcard cli/wap/*.py)
-
-pykolab_confdir = $(pythondir)/$(PACKAGE)/conf
-pykolab_conf_PYTHON = conf/defaults.py conf/__init__.py \
-	$(am__append_1)
-pykolab_imapdir = $(pythondir)/$(PACKAGE)/imap
-pykolab_imap_PYTHON = \
-	imap/__init__.py \
-	imap/cyrus.py
-
-pykolab_pluginsdir = $(pythondir)/$(PACKAGE)/plugins
-pykolab_plugins_PYTHON = \
-	plugins/__init__.py
-
-pykolab_plugins_defaultfoldersdir = $(pythondir)/$(PACKAGE)/plugins/defaultfolders
-pykolab_plugins_defaultfolders_PYTHON = \
-	plugins/defaultfolders/__init__.py
-
-pykolab_plugins_dynamicquotadir = $(pythondir)/$(PACKAGE)/plugins/dynamicquota
-pykolab_plugins_dynamicquota_PYTHON = \
-	plugins/dynamicquota/__init__.py
-
-pykolab_plugins_recipientpolicydir = $(pythondir)/$(PACKAGE)/plugins/recipientpolicy
-pykolab_plugins_recipientpolicy_PYTHON = \
-	plugins/recipientpolicy/__init__.py
-
-pykolab_plugins_sievemgmtdir = $(pythondir)/$(PACKAGE)/plugins/sievemgmt
-pykolab_plugins_sievemgmt_PYTHON = \
-	plugins/sievemgmt/__init__.py
-
-pykolab_setupdir = $(pythondir)/$(PACKAGE)/setup
-pykolab_setup_PYTHON = \
-	setup/components.py \
-	setup/setup_freebusy.py \
-	setup/setup_imap.py \
-	setup/setup_kolabd.py \
-	setup/setup_ldap.py \
-	setup/setup_mta.py \
-	setup/setup_mysql.py \
-	setup/setup_php.py \
-	setup/setup_roundcube.py \
-	setup/setup_syncroton.py \
-	setup/__init__.py
-
-pykolab_wapclientdir = $(pythondir)/$(PACKAGE)/wap_client
-pykolab_wapclient_PYTHON = \
-	$(wildcard wap_client/*.py)
-
-pykolab_xmldir = $(pythondir)/$(PACKAGE)/xml
-pykolab_xml_PYTHON = \
-	$(wildcard xml/*.py)
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu pykolab/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu pykolab/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-constants.py: $(top_builddir)/config.status $(srcdir)/constants.py.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-install-pykolabPYTHON: $(pykolab_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_PYTHON)'; dlist=; list2=; test -n "$(pykolabdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolabdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolabdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolabdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolabdir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolabdir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolabPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_PYTHON)'; test -n "$(pykolabdir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolabdir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_authPYTHON: $(pykolab_auth_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_auth_PYTHON)'; dlist=; list2=; test -n "$(pykolab_authdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_authdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_authdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_authdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_authdir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_authdir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_authPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_auth_PYTHON)'; test -n "$(pykolab_authdir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_authdir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_auth_ldapPYTHON: $(pykolab_auth_ldap_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_auth_ldap_PYTHON)'; dlist=; list2=; test -n "$(pykolab_auth_ldapdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_auth_ldapdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_auth_ldapdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_auth_ldapdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_auth_ldapdir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_auth_ldapdir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_auth_ldapPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_auth_ldap_PYTHON)'; test -n "$(pykolab_auth_ldapdir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_auth_ldapdir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_cliPYTHON: $(pykolab_cli_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_cli_PYTHON)'; dlist=; list2=; test -n "$(pykolab_clidir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_clidir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_clidir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_clidir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_clidir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_clidir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_cliPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_cli_PYTHON)'; test -n "$(pykolab_clidir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_clidir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_clisievePYTHON: $(pykolab_clisieve_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_clisieve_PYTHON)'; dlist=; list2=; test -n "$(pykolab_clisievedir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_clisievedir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_clisievedir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_clisievedir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_clisievedir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_clisievedir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_clisievePYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_clisieve_PYTHON)'; test -n "$(pykolab_clisievedir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_clisievedir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_clitelemetryPYTHON: $(pykolab_clitelemetry_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_clitelemetry_PYTHON)'; dlist=; list2=; test -n "$(pykolab_clitelemetrydir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_clitelemetrydir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_clitelemetrydir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_clitelemetrydir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_clitelemetrydir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_clitelemetrydir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_clitelemetryPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_clitelemetry_PYTHON)'; test -n "$(pykolab_clitelemetrydir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_clitelemetrydir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_cliwapPYTHON: $(pykolab_cliwap_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_cliwap_PYTHON)'; dlist=; list2=; test -n "$(pykolab_cliwapdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_cliwapdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_cliwapdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_cliwapdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_cliwapdir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_cliwapdir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_cliwapPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_cliwap_PYTHON)'; test -n "$(pykolab_cliwapdir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_cliwapdir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_confPYTHON: $(pykolab_conf_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_conf_PYTHON)'; dlist=; list2=; test -n "$(pykolab_confdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_confdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_confdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_confdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_confdir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_confdir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_confPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_conf_PYTHON)'; test -n "$(pykolab_confdir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_confdir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_imapPYTHON: $(pykolab_imap_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_imap_PYTHON)'; dlist=; list2=; test -n "$(pykolab_imapdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_imapdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_imapdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_imapdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_imapdir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_imapdir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_imapPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_imap_PYTHON)'; test -n "$(pykolab_imapdir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_imapdir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_pluginsPYTHON: $(pykolab_plugins_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_plugins_PYTHON)'; dlist=; list2=; test -n "$(pykolab_pluginsdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_pluginsdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_pluginsdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_pluginsdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_pluginsdir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_pluginsdir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_pluginsPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_plugins_PYTHON)'; test -n "$(pykolab_pluginsdir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_pluginsdir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_plugins_defaultfoldersPYTHON: $(pykolab_plugins_defaultfolders_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_plugins_defaultfolders_PYTHON)'; dlist=; list2=; test -n "$(pykolab_plugins_defaultfoldersdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_plugins_defaultfoldersdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_plugins_defaultfoldersdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_plugins_defaultfoldersdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_plugins_defaultfoldersdir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_plugins_defaultfoldersdir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_plugins_defaultfoldersPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_plugins_defaultfolders_PYTHON)'; test -n "$(pykolab_plugins_defaultfoldersdir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_plugins_defaultfoldersdir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_plugins_dynamicquotaPYTHON: $(pykolab_plugins_dynamicquota_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_plugins_dynamicquota_PYTHON)'; dlist=; list2=; test -n "$(pykolab_plugins_dynamicquotadir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_plugins_dynamicquotadir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_plugins_dynamicquotadir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_plugins_dynamicquotadir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_plugins_dynamicquotadir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_plugins_dynamicquotadir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_plugins_dynamicquotaPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_plugins_dynamicquota_PYTHON)'; test -n "$(pykolab_plugins_dynamicquotadir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_plugins_dynamicquotadir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_plugins_recipientpolicyPYTHON: $(pykolab_plugins_recipientpolicy_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_plugins_recipientpolicy_PYTHON)'; dlist=; list2=; test -n "$(pykolab_plugins_recipientpolicydir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_plugins_recipientpolicydir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_plugins_recipientpolicydir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_plugins_recipientpolicydir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_plugins_recipientpolicydir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_plugins_recipientpolicydir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_plugins_recipientpolicyPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_plugins_recipientpolicy_PYTHON)'; test -n "$(pykolab_plugins_recipientpolicydir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_plugins_recipientpolicydir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_plugins_sievemgmtPYTHON: $(pykolab_plugins_sievemgmt_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_plugins_sievemgmt_PYTHON)'; dlist=; list2=; test -n "$(pykolab_plugins_sievemgmtdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_plugins_sievemgmtdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_plugins_sievemgmtdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_plugins_sievemgmtdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_plugins_sievemgmtdir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_plugins_sievemgmtdir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_plugins_sievemgmtPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_plugins_sievemgmt_PYTHON)'; test -n "$(pykolab_plugins_sievemgmtdir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_plugins_sievemgmtdir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_setupPYTHON: $(pykolab_setup_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_setup_PYTHON)'; dlist=; list2=; test -n "$(pykolab_setupdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_setupdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_setupdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_setupdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_setupdir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_setupdir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_setupPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_setup_PYTHON)'; test -n "$(pykolab_setupdir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_setupdir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_wapclientPYTHON: $(pykolab_wapclient_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_wapclient_PYTHON)'; dlist=; list2=; test -n "$(pykolab_wapclientdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_wapclientdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_wapclientdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_wapclientdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_wapclientdir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_wapclientdir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_wapclientPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_wapclient_PYTHON)'; test -n "$(pykolab_wapclientdir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_wapclientdir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-install-pykolab_xmlPYTHON: $(pykolab_xml_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(pykolab_xml_PYTHON)'; dlist=; list2=; test -n "$(pykolab_xmldir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pykolab_xmldir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pykolab_xmldir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pykolab_xmldir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pykolab_xmldir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(pykolab_xmldir)" $$dlist; \
-	else :; fi
-
-uninstall-pykolab_xmlPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pykolab_xml_PYTHON)'; test -n "$(pykolab_xmldir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(pykolab_xmldir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-	for dir in "$(DESTDIR)$(pykolabdir)" "$(DESTDIR)$(pykolab_authdir)" "$(DESTDIR)$(pykolab_auth_ldapdir)" "$(DESTDIR)$(pykolab_clidir)" "$(DESTDIR)$(pykolab_clisievedir)" "$(DESTDIR)$(pykolab_clitelemetrydir)" "$(DESTDIR)$(pykolab_cliwapdir)" "$(DESTDIR)$(pykolab_confdir)" "$(DESTDIR)$(pykolab_imapdir)" "$(DESTDIR)$(pykolab_pluginsdir)" "$(DESTDIR)$(pykolab_plugins_defaultfoldersdir)" "$(DESTDIR)$(pykolab_plugins_dynamicquotadir)" "$(DESTDIR)$(pykolab_plugins_recipientpolicydir)" "$(DESTDIR)$(pykolab_plugins_sievemgmtdir)" "$(DESTDIR)$(pykolab_setupdir)" "$(DESTDIR)$(pykolab_wapclientdir)" "$(DESTDIR)$(pykolab_xmldir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-pykolabPYTHON install-pykolab_authPYTHON \
-	install-pykolab_auth_ldapPYTHON install-pykolab_cliPYTHON \
-	install-pykolab_clisievePYTHON \
-	install-pykolab_clitelemetryPYTHON \
-	install-pykolab_cliwapPYTHON install-pykolab_confPYTHON \
-	install-pykolab_imapPYTHON install-pykolab_pluginsPYTHON \
-	install-pykolab_plugins_defaultfoldersPYTHON \
-	install-pykolab_plugins_dynamicquotaPYTHON \
-	install-pykolab_plugins_recipientpolicyPYTHON \
-	install-pykolab_plugins_sievemgmtPYTHON \
-	install-pykolab_setupPYTHON install-pykolab_wapclientPYTHON \
-	install-pykolab_xmlPYTHON
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-pykolabPYTHON uninstall-pykolab_authPYTHON \
-	uninstall-pykolab_auth_ldapPYTHON uninstall-pykolab_cliPYTHON \
-	uninstall-pykolab_clisievePYTHON \
-	uninstall-pykolab_clitelemetryPYTHON \
-	uninstall-pykolab_cliwapPYTHON uninstall-pykolab_confPYTHON \
-	uninstall-pykolab_imapPYTHON uninstall-pykolab_pluginsPYTHON \
-	uninstall-pykolab_plugins_defaultfoldersPYTHON \
-	uninstall-pykolab_plugins_dynamicquotaPYTHON \
-	uninstall-pykolab_plugins_recipientpolicyPYTHON \
-	uninstall-pykolab_plugins_sievemgmtPYTHON \
-	uninstall-pykolab_setupPYTHON \
-	uninstall-pykolab_wapclientPYTHON uninstall-pykolab_xmlPYTHON
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
-	ctags-am distclean distclean-generic distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-pykolabPYTHON \
-	install-pykolab_authPYTHON install-pykolab_auth_ldapPYTHON \
-	install-pykolab_cliPYTHON install-pykolab_clisievePYTHON \
-	install-pykolab_clitelemetryPYTHON \
-	install-pykolab_cliwapPYTHON install-pykolab_confPYTHON \
-	install-pykolab_imapPYTHON install-pykolab_pluginsPYTHON \
-	install-pykolab_plugins_defaultfoldersPYTHON \
-	install-pykolab_plugins_dynamicquotaPYTHON \
-	install-pykolab_plugins_recipientpolicyPYTHON \
-	install-pykolab_plugins_sievemgmtPYTHON \
-	install-pykolab_setupPYTHON install-pykolab_wapclientPYTHON \
-	install-pykolab_xmlPYTHON install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags-am uninstall uninstall-am \
-	uninstall-pykolabPYTHON uninstall-pykolab_authPYTHON \
-	uninstall-pykolab_auth_ldapPYTHON uninstall-pykolab_cliPYTHON \
-	uninstall-pykolab_clisievePYTHON \
-	uninstall-pykolab_clitelemetryPYTHON \
-	uninstall-pykolab_cliwapPYTHON uninstall-pykolab_confPYTHON \
-	uninstall-pykolab_imapPYTHON uninstall-pykolab_pluginsPYTHON \
-	uninstall-pykolab_plugins_defaultfoldersPYTHON \
-	uninstall-pykolab_plugins_dynamicquotaPYTHON \
-	uninstall-pykolab_plugins_recipientpolicyPYTHON \
-	uninstall-pykolab_plugins_sievemgmtPYTHON \
-	uninstall-pykolab_setupPYTHON \
-	uninstall-pykolab_wapclientPYTHON uninstall-pykolab_xmlPYTHON
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

pykolab-0.7.tar.gz/pykolab/auth/ldap/__init__.py Changed

@@ -1816,9 +1816,26 @@
         if entry.has_key('kolabfolderaclentry') and \
                 not entry['kolabfolderaclentry'] == None:
 
+            if isinstance(entry['kolabfolderaclentry'], basestring):
+                entry['kolabfolderaclentry'] = [ entry['kolabfolderaclentry'] ]
+
+            import copy
+            _acls = copy.deepcopy(entry['kolabfolderaclentry'])
+            entry['kolabfolderaclentry'] = []
+
+            for _entry in _acls:
+                if _entry[0] == "(":
+                    entry['kolabfolderaclentry'].append(_entry)
+                    continue
+
+                s,r = [x.strip() for x in _entry.split(',')]
+
+                entry['kolabfolderaclentry'].append("('%s', '%s', '%s')" % (folder_path, s, r))
+
             self.imap._set_kolab_mailfolder_acls(
                     entry['kolabfolderaclentry']
                 )
+
         elif entry['kolabfolderaclentry'] in [None,[]]:
             for ace in self.imap.list_acls(folder_path):
                 aci_subject = ace.split()[0]

pykolab-0.7.tar.gz/pykolab/cli/cmd_examine_message.py Deleted

@@ -1,73 +0,0 @@
-# -*- coding: utf-8 -*-
-# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
-#
-# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 3 or, at your option, any later version
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Library General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-
-import sys
-
-import commands
-
-import pykolab
-
-from pykolab import imap_utf7
-from pykolab.imap import IMAP
-from pykolab.translate import _
-
-log = pykolab.getLogger('pykolab.cli')
-conf = pykolab.getConf()
-
-def __init__():
-    commands.register('examine_message', execute, description=description())
-
-def description():
-    return _("List messages in a folder")
-
-def execute(*args, **kw):
-    """
-        List messages in a folder
-    """
-
-    try:
-        folder = conf.cli_args.pop(0)
-
-        try:
-            uid = conf.cli_args.pop(0)
-        except:
-            log.error(_("Specify a message UID"))
-            sys.exit(1)
-
-    except:
-        log.error(_("Specify a folder"))
-        sys.exit(1)
-
-    imap = IMAP()
-    imap.connect()
-
-    _folder = imap.lm(imap_utf7.encode(folder))
-
-    if _folder == None or _folder == []:
-        log.error(_("No such folder"))
-        sys.exit(1)
-
-    imap.set_acl(folder, 'cyrus-admin', 'lrs')
-
-    imap.select(imap_utf7.encode(folder))
-
-    typ, data = imap.fetch(uid, '(RFC822)')
-    print typ, data[0][1]
-
-    imap.set_acl(folder, 'cyrus-admin', '')

pykolab-0.7.tar.gz/pykolab/cli/cmd_list_contacts.py Deleted

@@ -1,86 +0,0 @@
-# -*- coding: utf-8 -*-
-# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
-#
-# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 3 or, at your option, any later version
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Library General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-
-import sys
-
-import commands
-
-import pykolab
-
-from pykolab import imap_utf7
-from pykolab.imap import IMAP
-from pykolab.translate import _
-
-log = pykolab.getLogger('pykolab.cli')
-conf = pykolab.getConf()
-
-def __init__():
-    commands.register('list_contacts', execute, description=description())
-
-def description():
-    return _("List messages in a folder")
-
-def execute(*args, **kw):
-    """
-        List messages in a folder
-    """
-
-    try:
-        folder = conf.cli_args.pop(0)
-
-    except:
-        log.error(_("Specify a folder"))
-        sys.exit(1)
-
-    imap = IMAP()
-    imap.connect()
-
-    _folder = imap.lm(imap_utf7.encode(folder))
-
-    if _folder == None or _folder == []:
-        log.error(_("No such folder"))
-        sys.exit(1)
-
-    imap.set_acl(folder, 'cyrus-admin', 'lrs')
-
-    imap.select(imap_utf7.encode(folder))
-
-    typ, data = imap.search(None, '(ALL UNDELETED HEADER X-Kolab-Type application/x-vnd.kolab.contact)')
-
-    num_messages = len(data[0].split())
-
-    for num in data[0].split():
-        typ, flags = imap.fetch(num, 'FLAGS')
-        flags = flags[0].split()
-        if len(flags) >= 3:
-            # Any flags are set
-            if flags[2] == '(\\Deleted))':
-                print num, '\Deleted'
-            elif flags[2] == '(\\Deleted':
-                print num, '\Deleted'
-            elif '\\Deleted' in flags[3:]:
-                print num, '\Deleted'
-            elif '\\Deleted))' in flags[3:]:
-                print num, '\Deleted'
-            else:
-                print num
-        else:
-            print num
-
-    imap.set_acl(folder, 'cyrus-admin', '')

pykolab-0.7.tar.gz/pykolab/cli/cmd_list_events.py Deleted

@@ -1,86 +0,0 @@
-# -*- coding: utf-8 -*-
-# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
-#
-# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 3 or, at your option, any later version
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Library General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-
-import sys
-
-import commands
-
-import pykolab
-
-from pykolab import imap_utf7
-from pykolab.imap import IMAP
-from pykolab.translate import _
-
-log = pykolab.getLogger('pykolab.cli')
-conf = pykolab.getConf()
-
-def __init__():
-    commands.register('list_events', execute, description=description())
-
-def description():
-    return _("List messages in a folder")
-
-def execute(*args, **kw):
-    """
-        List messages in a folder
-    """
-
-    try:
-        folder = conf.cli_args.pop(0)
-
-    except:
-        log.error(_("Specify a folder"))
-        sys.exit(1)
-
-    imap = IMAP()
-    imap.connect()
-
-    _folder = imap.lm(imap_utf7.encode(folder))
-
-    if _folder == None or _folder == []:
-        log.error(_("No such folder"))
-        sys.exit(1)
-
-    imap.set_acl(folder, 'cyrus-admin', 'lrs')
-
-    imap.select(imap_utf7.encode(folder))
-
-    typ, data = imap.search(None, '(ALL UNDELETED HEADER X-Kolab-Type application/x-vnd.kolab.event)')
-
-    num_messages = len(data[0].split())
-
-    for num in data[0].split():
-        typ, flags = imap.fetch(num, 'FLAGS')
-        flags = flags[0].split()
-        if len(flags) >= 3:
-            # Any flags are set
-            if flags[2] == '(\\Deleted))':
-                print num, '\Deleted'
-            elif flags[2] == '(\\Deleted':
-                print num, '\Deleted'
-            elif '\\Deleted' in flags[3:]:
-                print num, '\Deleted'
-            elif '\\Deleted))' in flags[3:]:
-                print num, '\Deleted'
-            else:
-                print num
-        else:
-            print num
-
-    imap.set_acl(folder, 'cyrus-admin', '')

pykolab-0.7.tar.gz/pykolab/cli/cmd_rebalance_mailboxes.py Deleted

@@ -1,132 +0,0 @@
-# -*- coding: utf-8 -*-
-# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
-#
-# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 3 or, at your option, any later version
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Library General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-
-import sys
-
-import commands
-
-import pykolab
-
-from pykolab.auth import Auth
-from pykolab.imap import IMAP
-from pykolab.translate import _
-
-log = pykolab.getLogger('pykolab.cli')
-conf = pykolab.getConf()
-
-def __init__():
-    commands.register('rebalance_mailboxes', execute, description=description())
-
-def cli_options():
-    my_option_group = conf.add_cli_parser_option_group(_("CLI Options"))
-    my_option_group.add_option( '--dry-run',
-                                dest    = "dry_run",
-                                action  = "store_true",
-                                default = False,
-                                help    = _("Do a dry run."))
-
-def description():
-    return """List quota for a folder."""
-
-def execute(*args, **kw):
-    """
-        List quota for a mailbox
-    """
-
-    imap = IMAP()
-    imap.connect()
-
-    auth = Auth()
-    auth.connect()
-
-    domains = auth.list_domains()
-
-    folders = {}
-
-    for domain in domains.keys():
-        for folder in imap.lm("user/%%@%s" % (domain)):
-            folders[folder] = get_quota(imap, folder)
-
-        for folder in imap.lm("shared/%%@%s" % (domain)):
-            folders[folder] = get_quota(imap, folder)
-
-    for folder in imap.lm("user/%%"):
-        folders[folder] = get_quota(imap, folder)
-
-    for folder in imap.lm("shared/%%"):
-        folders[folder] = get_quota(imap, folder)
-
-    for folder in folders.keys():
-        if folders[folder] == None:
-            del folders[folder]
-
-    for folder in folders:
-        folders[folder]['server'] = imap.imap.find_mailfolder_server(folder)
-
-    # Data gathered, calculations can begin.
-    mboxs = {}
-    used = {}
-    alloc = {}
-
-    for folder in folders:
-        if not mboxs.has_key(folders[folder]['server']):
-            mboxs[folders[folder]['server']] = 0
-
-        if not used.has_key(folders[folder]['server']):
-            used[folders[folder]['server']] = 0
-
-        if not alloc.has_key(folders[folder]['server']):
-            alloc[folders[folder]['server']] = 0
-
-        mboxs[folders[folder]['server']] += 1
-        used[folders[folder]['server']] += folders[folder]['used']
-        alloc[folders[folder]['server']] += folders[folder]['quota']
-
-    #mboxs = {'bs101.kolabsys.net': 2812, 'bs102.kolabsys.net': 46, 'bs103.kolabsys.net': 6}
-    #used = {'bs101.kolabsys.net': 7508435, 'bs102.kolabsys.net': 586967, 'bs103.kolabsys.net': 121}
-    #alloc = {'bs101.kolabsys.net': 3279032832, 'bs102.kolabsys.net': 60817408, 'bs103.kolabsys.net': 6291456}
-
-    print "number of mailboxes per node:", mboxs
-    print "average per mailbox:", sum(mboxs.values()) / len(mboxs.keys())
-    for (k,v) in mboxs.iteritems():
-        print "k:", k, "is", float(v * len(mboxs.keys())) / float(sum(mboxs.values())), "%"
-
-    print "used:", used
-    print "used average:", sum(used.values()) / len(used.keys())
-    for (k,v) in used.iteritems():
-        if (float(sum(used.values())) > 0):
-            print "k:", k, "is", float(v * len(used.keys())) / float(sum(used.values())), "%"
-
-        print "average storage per mailbox:", float(used[k]) / float(mboxs[k])
-
-    print alloc
-    print sum(alloc.values()) / len(alloc.keys())
-    for (k,v) in alloc.iteritems():
-        if (float(sum(alloc.values())) > 0):
-            print "k:", k, "is", float(v * len(alloc.keys())) / float(sum(alloc.values())), "%"
-        print "average quota per mailbox:", float(alloc[k]) / float(mboxs[k])
-
-
-def get_quota(imap, folder):
-    try:
-        (used, quota) = imap.get_quota(folder)
-        if not used == None and not quota == None:
-            return {'used': used, 'quota': quota}
-    except:
-        return None

pykolab-0.7.tar.gz/pykolab/cli/cmd_rename_mailbox.py Changed

pykolab-0.7.tar.gz/pykolab/cli/cmd_role_info.py Deleted

@@ -1,47 +0,0 @@
-# -*- coding: utf-8 -*-
-# Copyright 2010-2012 Kolab Systems AG (http://www.kolabsys.com)
-#
-# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 3 or, at your option, any later version
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Library General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-
-import commands
-
-import pykolab
-
-from pykolab import utils
-from pykolab.translate import _
-
-log = pykolab.getLogger('pykolab.cli')
-conf = pykolab.getConf()
-
-def __init__():
-    commands.register('role_info', execute, description="Display role information.")
-
-def execute(*args, **kw):
-    from pykolab import wap_client
-
-    try:
-        role = conf.cli_args.pop(0)
-    except IndexError, errmsg:
-        role = utils.ask_question(_("Role"))
-
-    # Create the authentication object.
-    # TODO: Binds with superuser credentials!
-    wap_client.authenticate(username=conf.get("ldap", "bind_dn"), password=conf.get("ldap", "bind_pw"))
-    role = wap_client.role_info(role)
-
-    print role
-

pykolab-0.7.tar.gz/pykolab/cli/cmd_summarize_quota_allocation.py Deleted

@@ -1,74 +0,0 @@
-# -*- coding: utf-8 -*-
-# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
-#
-# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 3 or, at your option, any later version
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Library General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-
-import sys
-
-import commands
-
-import pykolab
-
-from pykolab.imap import IMAP
-from pykolab.translate import _
-
-log = pykolab.getLogger('pykolab.cli')
-conf = pykolab.getConf()
-
-def __init__():
-    commands.register('summarize_quota_allocation', execute, description=description(), aliases=['sqa'])
-
-def cli_options():
-    my_option_group = conf.add_cli_parser_option_group(_("CLI Options"))
-    my_option_group.add_option( '--server',
-                                dest    = "connect_server",
-                                action  = "store",
-                                default = None,
-                                metavar = "SERVER",
-                                help    = _("List mailboxes on server SERVER only."))
-
-def description():
-    return """Summarize all quota allocated."""
-
-def execute(*args, **kw):
-    """
-        Summarize all quota allocated.
-    """
-
-    imap = IMAP()
-
-    if not conf.connect_server == None:
-        imap.connect(server=conf.connect_server)
-    else:
-        imap.connect()
-
-    quota_folders = imap.list_folders('*')
-
-    quota_alloc = 0
-    quota_used = 0
-
-    for quota_folder in quota_folders:
-        try:
-            (used, quota) = imap.get_quota(quota_folder)
-            if not used == None and not quota == None:
-                quota_alloc += float(quota)
-                used += float(used)
-        except:
-            pass
-
-    print "Quota Allocated:\t%-5d GB" % ((quota_alloc / 1024 / 1024))
-    print "Quota Used:\t%-5d GB" % ((quota_alloc / 1024 / 1024))

pykolab-0.7.tar.gz/pykolab/constants.py Deleted

@@ -1,120 +0,0 @@
-# -*- coding: utf-8 -*-
-# Copyright 2010 Kolab Systems AG (http://www.kolabsys.com)
-#
-# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-import math
-import socket
-import sys
-
-from pykolab.translate import _
-
-__license__   = "GPLv2+"
-__copyright__ = "Kolab Systems AG"
-__version__   = '0.7'
-__release__   = '0.1'
-
-if 0.1 < 1:
-    __status__    = 'snapshot'
-elif math.floor((float)(0.1)) < (float)(0.1):
-    __status__    = 'prerelease'
-else:
-    __status__    = 'stable'
-
-domain = 'pykolab'
-
-epilog = _("PyKolab is a Kolab Systems product. For more information about Kolab or PyKolab, visit http://www.kolabsys.com")
-
-COMPONENTS = [
-        'imap',
-        'ldap',
-        'mta'
-    ]
-
-hostname = socket.gethostname()
-fqdn = socket.getfqdn()
-try:
-    domain_parts = fqdn.split('.')
-    if len(domain_parts) < 3:
-        print >> sys.stderr, _("WARNING") + ": " + _("The Fully Qualified Domain Name or FQDN for this system is incorrect. Falling back to 'localdomain'.")
-        domainname = "localdomain"
-    else:
-        domainname = '.'.join(domain_parts[1:])
-except IndexError:
-    domainname = "localdomain"
-
-# The system RC directory
-RC_DIR = "/etc/rc.d/init.d/"
-KOLAB_LIB_PATH = '/var/lib/kolab/'
-
-# Service map;
-#
-# Convert names of registered system services to their type. For example,
-# on Red Hat, OpenLDAP is 'slapd', whereas on Debian, OpenLDAP is 'ldap'.
-#
-SERVICE_MAP = {
-        'dirsrv': {
-                'type':         '389ds',
-                'description':  _('389 Directory Server or Red Hat Directory Server')
-            },
-        'ldap': {
-                'type':         'openldap',
-                'description':  _('OpenLDAP or compatible')
-            },
-        'slapd': {
-                'type':         'openldap',
-                'description':  _('OpenLDAP or compatible')
-            },
-    }
-
-import ldap
-LDAP_SCOPE = {
-        'base': ldap.SCOPE_BASE,
-        'sub': ldap.SCOPE_SUBTREE,
-        'one': ldap.SCOPE_ONELEVEL
-    }
-
-SUPPORTED_LDAP_CONTROLS = {
-        0: {
-                'desc': 'Persistent Search Control',
-                'oid': '2.16.840.1.113730.3.4.3',
-                'func': '_persistent_search'
-            },
-        1: {
-                'desc': 'OpenLDAP Syncrepl (RFC4533)',
-                'oid': '1.3.6.1.4.1.4203.1.9.1.1',
-                'func': '_sync_repl'
-            },
-        2: {
-                'desc': 'Simple Paged Results Control',
-                'oid': '1.2.840.113556.1.4.319',
-                'func': '_paged_search'
-            },
-        3: {
-                'desc': 'Virtual List View Control',
-                'oid': '2.16.840.1.113730.3.4.9',
-                'func': '_vlv_search'
-            },
-    }
-
-#SUPPORTED_LDAP_CONTROLS = {
-#        0: {
-#                'desc': 'OpenLDAP Syncrepl (RFC4533)',
-#                'oid': '1.3.6.1.4.1.4203.1.9.1.1',
-#                'func': '_sync_repl'
-#            }
-#    }

pykolab-0.7.tar.gz/pykolab/imap/cyrus.py Changed

pykolab-0.7.tar.gz/pykolab/itip Added

pykolab-0.7.tar.gz/pykolab/itip/__init__.py Added

@@ -0,0 +1,285 @@
+import icalendar
+import pykolab
+
+from pykolab.xml import to_dt
+from pykolab.xml import event_from_ical
+from pykolab.xml import participant_status_label
+from pykolab.translate import _
+
+log = pykolab.getLogger('pykolab.wallace')
+
+
+def events_from_message(message, methods=None):
+    return objects_from_message(message, "VEVENT", methods)
+
+def todos_from_message(message, methods=None):
+    return objects_from_message(message, "VTODO", methods)
+
+
+def objects_from_message(message, objname, methods=None):
+    """
+        Obtain the iTip payload from email.message <message>
+    """
+    # Placeholder for any itip_objects found in the message.
+    itip_objects = []
+    seen_uids = []
+
+    # iTip methods we are actually interested in. Other methods will be ignored.
+    if methods is None:
+        methods = [ "REQUEST", "CANCEL" ]
+
+    # Are all iTip messages multipart? No! RFC 6047, section 2.4 states "A
+    # MIME body part containing content information that conforms to this
+    # document MUST have (...)" but does not state whether an iTip message must
+    # therefore also be multipart.
+
+    # Check each part
+    for part in message.walk():
+
+        # The iTip part MUST be Content-Type: text/calendar (RFC 6047, section 2.4)
+        # But in real word, other mime-types are used as well
+        if part.get_content_type() in [ "text/calendar", "text/x-vcalendar", "application/ics" ]:
+            if not str(part.get_param('method')).upper() in methods:
+                log.info(_("Method %r not really interesting for us.") % (part.get_param('method')))
+                continue
+
+            # Get the itip_payload
+            itip_payload = part.get_payload(decode=True)
+
+            log.debug(_("Raw iTip payload: %s") % (itip_payload), level=9)
+
+            # Python iCalendar prior to 3.0 uses "from_string".
+            if hasattr(icalendar.Calendar, 'from_ical'):
+                cal = icalendar.Calendar.from_ical(itip_payload)
+            elif hasattr(icalendar.Calendar, 'from_string'):
+                cal = icalendar.Calendar.from_string(itip_payload)
+
+            # If we can't read it, we're out
+            else:
+                log.error(_("Could not read iTip from message."))
+                return []
+
+            for c in cal.walk():
+                if c.name == objname:
+                    itip = {}
+
+                    if c['uid'] in seen_uids:
+                        log.debug(_("Duplicate iTip object: %s") % (c['uid']), level=9)
+                        continue
+
+                    # From the event, take the following properties:
+                    #
+                    # - method
+                    # - uid
+                    # - sequence
+                    # - start
+                    # - end (if any)
+                    # - duration (if any)
+                    # - organizer
+                    # - attendees (if any)
+                    # - resources (if any)
+                    #
+
+                    itip['uid'] = str(c['uid'])
+                    itip['method'] = str(cal['method']).upper()
+                    itip['sequence'] = int(c['sequence']) if c.has_key('sequence') else 0
+
+                    if c.has_key('dtstart'):
+                        itip['start'] = c['dtstart'].dt
+                    else:
+                        log.error(_("iTip event without a start"))
+                        continue
+
+                    if c.has_key('dtend'):
+                        itip['end'] = c['dtend'].dt
+
+                    if c.has_key('duration'):
+                        itip['duration'] = c['duration'].dt
+                        itip['end'] = itip['start'] + c['duration'].dt
+
+                    itip['organizer'] = c['organizer']
+
+                    itip['attendees'] = c['attendee']
+
+                    if itip.has_key('attendees') and not isinstance(itip['attendees'], list):
+                        itip['attendees'] = [c['attendee']]
+
+                    if c.has_key('resources'):
+                        itip['resources'] = c['resources']
+
+                    itip['raw'] = itip_payload
+
+                    try:
+                        # TODO: distinguish event and todo here
+                        itip['xml'] = event_from_ical(c.to_ical())
+                    except Exception, e:
+                        log.error("event_from_ical() exception: %r; iCal: %s" % (e, itip_payload))
+                        continue
+
+                    itip_objects.append(itip)
+
+                    seen_uids.append(c['uid'])
+
+                # end if c.name == "VEVENT"
+
+            # end for c in cal.walk()
+
+        # end if part.get_content_type() == "text/calendar"
+
+    # end for part in message.walk()
+
+    if not len(itip_objects) and not message.is_multipart():
+        log.debug(_("Message is not an iTip message (non-multipart message)"), level=5)
+
+    return itip_objects
+
+
+def check_event_conflict(kolab_event, itip_event):
+    """
+        Determine whether the given kolab event conflicts with the given itip event
+    """
+    conflict = False
+
+    # don't consider conflict with myself
+    if kolab_event.uid == itip_event['uid']:
+        return conflict
+
+    # TODO: don't consider conflict if event has TRANSP:TRANSPARENT
+
+    _es = to_dt(kolab_event.get_start())
+    _ee = to_dt(kolab_event.get_ical_dtend())  # use iCal style end date: next day for all-day events
+
+    # naive loops to check for collisions in (recurring) events
+    # TODO: compare recurrence rules directly (e.g. matching time slot or weekday or monthday)
+    while not conflict and _es is not None:
+        _is = to_dt(itip_event['start'])
+        _ie = to_dt(itip_event['end'])
+
+        while not conflict and _is is not None:
+            # log.debug("* Comparing event dates at %s/%s with %s/%s" % (_es, _ee, _is, _ie), level=9)
+            conflict = check_date_conflict(_es, _ee, _is, _ie)
+            _is = to_dt(itip_event['xml'].get_next_occurence(_is)) if kolab_event.is_recurring() else None
+            _ie = to_dt(itip_event['xml'].get_occurence_end_date(_is))
+
+        _es = to_dt(kolab_event.get_next_occurence(_es)) if kolab_event.is_recurring() else None
+        _ee = to_dt(kolab_event.get_occurence_end_date(_es))
+
+    return conflict
+
+
+def check_date_conflict(_es, _ee, _is, _ie):
+    """
+        Check the given event start/end dates for conflicts
+    """
+    conflict = False
+
+    # TODO: add margin for all-day dates (+13h; -12h)
+
+    if _es < _is:
+        if _es <= _ie:
+            if _ee <= _is:
+                conflict = False
+            else:
+                conflict = True
+        else:
+            conflict = True
+    elif _es == _is:
+        conflict = True
+    else: # _es > _is
+        if _es <= _ie:
+            conflict = True
+        else:
+            conflict = False
+    
+    return conflict
+
+
+def send_reply(from_address, itip_events, response_text, subject=None):
+    """
+        Send the given iCal events as a valid iTip REPLY to the organizer.
+    """
+    import smtplib
+
+    conf = pykolab.getConf()
+    smtp = None
+
+    if isinstance(itip_events, dict):
+        itip_events = [ itip_events ]
+
+    for itip_event in itip_events:
+        attendee = itip_event['xml'].get_attendee_by_email(from_address)
+        participant_status = itip_event['xml'].get_ical_attendee_participant_status(attendee)
+
+        event_summary = itip_event['xml'].get_summary()
+        message_text = response_text % { 'summary':event_summary, 'status':participant_status_label(participant_status), 'name':attendee.get_name() }
+
+        if subject is not None:
+            subject = subject % { 'summary':event_summary, 'status':participant_status_label(participant_status), 'name':attendee.get_name() }
+
+        try:
+            message = itip_event['xml'].to_message_itip(from_address,
+                method="REPLY",
+                participant_status=participant_status,
+                message_text=message_text,
+                subject=subject
+            )
+        except Exception, e:
+            log.error(_("Failed to compose iTip reply message: %r") % (e))
+            return
+
+        smtp = smtplib.SMTP("localhost", 10026)  # replies go through wallace again
+
+        if conf.debuglevel > 8:
+            smtp.set_debuglevel(True)
+
+        try:
+            smtp.sendmail(message['From'], message['To'], message.as_string())
+        except Exception, e:
+            log.error(_("SMTP sendmail error: %r") % (e))
+
+    if smtp:
+        smtp.quit()
+
+
+def send_request(to_address, itip_events, request_text, subject=None, direct=False):
+    """
+        Send an iTip REQUEST message from the given iCal events
+    """
+    import smtplib
+
+    conf = pykolab.getConf()
+    smtp = None
+
+    if isinstance(itip_events, dict):
+        itip_events = [ itip_events ]
+
+    for itip_event in itip_events:
+        event_summary = itip_event['xml'].get_summary()
+        message_text = request_text % { 'summary':event_summary }
+
+        if subject is not None:
+            subject = subject % { 'summary':event_summary }
+
+        try:
+            message = itip_event['xml'].to_message_itip(None,
+                method="REQUEST",
+                message_text=message_text,
+                subject=subject
+            )
+        except Exception, e:
+            log.error(_("Failed to compose iTip request message: %r") % (e))
+            return
+
+        port = 10027 if direct else 10026
+        smtp = smtplib.SMTP("localhost", port)
+
+        if conf.debuglevel > 8:
+            smtp.set_debuglevel(True)
+
+        try:
+            smtp.sendmail(message['From'], to_address, message.as_string())
+        except Exception, e:
+            log.error(_("SMTP sendmail error: %r") % (e))
+
+    if smtp:
+        smtp.quit()

pykolab-0.7.tar.gz/pykolab/plugins/roundcubedb Added

pykolab-0.7.tar.gz/pykolab/plugins/roundcubedb/__init__.py Added

@@ -0,0 +1,69 @@
+# -*- coding: utf-8 -*-
+# Copyright 2014 Kolab Systems AG (http://www.kolabsys.com)
+#
+# Thomas Bruederli (Kolab Systems) <bruederli(a)kolabsys.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 3 or, at your option, any later version
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+
+import os
+import pykolab
+import subprocess
+
+from pykolab.translate import _
+
+log = pykolab.getLogger('pykolab.plugins.roundcubedb')
+conf = pykolab.getConf()
+
+class KolabRoundcubedb(object):
+    """
+        Pykolab plugin to update Roundcube's database on Kolab users db changes
+    """
+
+    def __init__(self):
+        pass
+
+    def add_options(self, *args,  **kw):
+        pass
+
+    def user_delete(self, *args, **kw):
+        """
+            The arguments passed to the 'user_delete' hook:
+
+            user - full user entry from LDAP
+            domain - domain name
+        """
+
+        log.debug(_("user_delete: %r") % (kw), level=9)
+
+        if os.path.isdir('/usr/share/roundcubemail'):
+            rcpath = '/usr/share/roundcubemail/'
+        elif os.path.isdir('/usr/share/roundcube'):
+            rcpath = '/usr/share/roundcube/'
+        else:
+            log.error(_("Roundcube installation path not found."))
+            return False
+
+        result_attribute = conf.get('cyrus-sasl', 'result_attribute')
+
+        # execute Roundcube's bin/deluser.sh script to do the work
+        if kw.has_key('user') and kw['user'].has_key(result_attribute) and os.path.exists(rcpath + 'bin/deluser.sh'):
+            proc = subprocess.Popen([ 'sudo -u apache', rcpath + 'bin/deluser.sh', kw['user'][result_attribute] ], stderr=subprocess.PIPE, stdout=subprocess.PIPE)
+            procout, procerr = proc.communicate()
+            if proc.returncode != 0:
+                log.error(rcpath + "bin/deluser.sh exited with error %d: %r" % (proc.returncode, procerr))
+            else:
+                log.debug(rcpath + "bin/deluser.sh success: %r; %r" % (procout, procerr), level=9)
+
+        return None

pykolab-0.7.tar.gz/pykolab/xml/event.py Changed

@@ -197,6 +197,10 @@
                 for _retval in retval:
                     event.add(attr.lower(), _retval, encode=0)
 
+        # copy custom properties to iCal
+        for cs in self.event.customProperties():
+            event.add(cs.identifier, cs.value)
+
         cal.add_component(event)
 
         if hasattr(cal, 'to_ical'):
@@ -512,7 +516,7 @@
         if status in self.status_map.keys():
             return status
 
-        return self._translate_value(status, self.status_map)
+        return self._translate_value(status, self.status_map) if status else None
 
     def get_ical_sequence(self):
         return str(self.event.sequence()) if self.event.sequence() else None
@@ -635,6 +639,14 @@
         for _datetime in _datetimes:
             self.add_exception_date(_datetime)
 
+    def add_custom_property(self, name, value):
+        if not name.upper().startswith('X-'):
+            raise ValueError, _("Invalid custom property name %r") % (name)
+
+        props = self.event.customProperties()
+        props.append(kolabformat.CustomProperty(name.upper(), value))
+        self.event.setCustomProperties(props)
+
     def set_from_ical(self, attr, value):
         ical_setter = 'set_ical_' + attr
         default_setter = 'set_' + attr

pykolab-0.7.tar.gz/pykolab/xml/task.py Deleted

pykolab-0.7.tar.gz/pylint.log Deleted

pykolab-0.7.tar.gz/saslauthd/Makefile.in Deleted

@@ -1,522 +0,0 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = saslauthd
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(saslauthd_PYTHON) $(top_srcdir)/py-compile
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__py_compile = PYTHON=$(PYTHON) $(SHELL) $(py_compile)
-am__installdirs = "$(DESTDIR)$(saslauthddir)"
-am__pep3147_tweak = \
-  sed -e 's|\.py$$||' -e 's|[^/]*$$|__pycache__/&.*.py|'
-py_compile = $(top_srcdir)/py-compile
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALL_LINGUAS = @ALL_LINGUAS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DATESTAMP = @DATESTAMP@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GMOFILES = @GMOFILES@
-GMSGFMT = @GMSGFMT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLLIBS = @INTLLIBS@
-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
-INTLTOOL_MERGE = @INTLTOOL_MERGE@
-INTLTOOL_PERL = @INTLTOOL_PERL@
-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
-INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
-INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
-INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
-INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGFMT_OPTS = @MSGFMT_OPTS@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POFILES = @POFILES@
-POSUB = @POSUB@
-PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
-PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
-PYTHON = @PYTHON@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RELEASE = @RELEASE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-intltool__v_merge_options_ = @intltool__v_merge_options_@
-intltool__v_merge_options_0 = @intltool__v_merge_options_0@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTRA_DIST = \
-	kolab-saslauthd.sysconfig \
-	kolab-saslauthd.systemd \
-	kolab-saslauthd.sysvinit
-
-saslauthddir = $(pythondir)/saslauthd
-saslauthd_PYTHON = $(wildcard *.py)
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu saslauthd/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu saslauthd/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-saslauthdPYTHON: $(saslauthd_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(saslauthd_PYTHON)'; dlist=; list2=; test -n "$(saslauthddir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(saslauthddir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(saslauthddir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(saslauthddir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(saslauthddir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(saslauthddir)" $$dlist; \
-	else :; fi
-
-uninstall-saslauthdPYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(saslauthd_PYTHON)'; test -n "$(saslauthddir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(saslauthddir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-	for dir in "$(DESTDIR)$(saslauthddir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-saslauthdPYTHON
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-exec-local
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-saslauthdPYTHON
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
-	ctags-am distclean distclean-generic distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-exec-local install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-saslauthdPYTHON install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags-am uninstall uninstall-am \
-	uninstall-saslauthdPYTHON
-
-
-install-exec-local:
-	mkdir -p $(DESTDIR)/$(localstatedir)/run/kolab-saslauthd \
-		$(DESTDIR)/$(localstatedir)/run/kolab-saslauthd \
-		$(DESTDIR)/$(localstatedir)/run/saslauthd \
-		$(DESTDIR)/$(localstatedir)/lib/kolab-saslauthd
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

pykolab-0.7.tar.gz/share/Makefile.in Deleted

@@ -1,519 +0,0 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = share
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(rctemplatedir)" \
-	"$(DESTDIR)$(templatedir)"
-DATA = $(rctemplate_DATA) $(template_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALL_LINGUAS = @ALL_LINGUAS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DATESTAMP = @DATESTAMP@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GMOFILES = @GMOFILES@
-GMSGFMT = @GMSGFMT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLLIBS = @INTLLIBS@
-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
-INTLTOOL_MERGE = @INTLTOOL_MERGE@
-INTLTOOL_PERL = @INTLTOOL_PERL@
-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
-INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
-INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
-INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
-INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGFMT_OPTS = @MSGFMT_OPTS@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POFILES = @POFILES@
-POSUB = @POSUB@
-PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
-PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
-PYTHON = @PYTHON@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RELEASE = @RELEASE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-intltool__v_merge_options_ = @intltool__v_merge_options_@
-intltool__v_merge_options_0 = @intltool__v_merge_options_0@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-templatedir = $(datadir)/kolab/templates
-template_DATA = \
-	$(wildcard templates/*.tpl) \
-	$(wildcard templates/header_checks.*)
-
-rctemplatedir = $(datadir)/kolab/templates/roundcubemail
-rctemplate_DATA = \
-	$(wildcard templates/roundcubemail/*.tpl)
-
-EXTRA_DIST = \
-	$(template_DATA) \
-	$(rctemplate_DATA)
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu share/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu share/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-rctemplateDATA: $(rctemplate_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(rctemplate_DATA)'; test -n "$(rctemplatedir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(rctemplatedir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(rctemplatedir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(rctemplatedir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(rctemplatedir)" || exit $$?; \
-	done
-
-uninstall-rctemplateDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(rctemplate_DATA)'; test -n "$(rctemplatedir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(rctemplatedir)'; $(am__uninstall_files_from_dir)
-install-templateDATA: $(template_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(template_DATA)'; test -n "$(templatedir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(templatedir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(templatedir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(templatedir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(templatedir)" || exit $$?; \
-	done
-
-uninstall-templateDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(template_DATA)'; test -n "$(templatedir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(templatedir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(rctemplatedir)" "$(DESTDIR)$(templatedir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-rctemplateDATA install-templateDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-exec-local
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-rctemplateDATA uninstall-templateDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
-	ctags-am distclean distclean-generic distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-exec-local install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-rctemplateDATA install-strip install-templateDATA \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags-am uninstall uninstall-am \
-	uninstall-rctemplateDATA uninstall-templateDATA
-
-
-install-exec-local:
-	mkdir -p \
-		$(DESTDIR)/$(sysconfdir)/kolab/templates \
-		$(DESTDIR)/$(sysconfdir)/kolab/templates/roundcubemail
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

pykolab-0.7.tar.gz/share/kolab2.schema Added

@@ -0,0 +1,1098 @@
+# $Id: kolab2.schema,v 1.38 2009/07/08 10:26:06 gunnar Exp $
+# (c) 2003, 2004 Tassilo Erlewein <tassilo.erlewein@erfrakon.de>
+# (c) 2003-2009  Martin Konold <martin.konold@erfrakon.de>
+# (c) 2003 Achim Frank <achim.frank@erfrakon.de>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# Redistributions of source code must retain the above copyright notice, this
+# list of conditions and the following disclaimer.
+#
+# Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# The name of the author may not be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# This schema highly depends on the core.schema, cosine.schema and the inetorgperson.schema
+# as provided by 3rd parties like OpenLDAP.
+#
+# slapd.conf then looks like
+# include /kolab/etc/openldap/schema/core.schema
+# include /kolab/etc/openldap/schema/cosine.schema
+# include /kolab/etc/openldap/schema/inetorgperson.schema
+# include /kolab/etc/openldap/schema/rfc2739.schema
+# include /kolab/etc/openldap/schema/kolab2.schema
+
+# Prefix for OIDs: 1.3.6.1.4.1.19414 <- registered
+# Prefix for OIDs: 1.3.6.1.4.1.19414.2000 <-- temporarily reserved for ob
+# Prefix for attributes: 1.3.6.1.4.1.19414.1
+# Prefix for attributes: 1.3.6.1.4.1.19414.2
+# Prefix for objectclasses: 1.3.6.1.4.1.19414.3
+# nameprefix: kolab
+#
+####################
+# kolab attributes #
+####################
+
+# helper attribute to make the kolab root easily findable in
+# a big ldap directory
+attributetype ( 1.3.6.1.4.1.19414.2.1.1
+  NAME ( 'k' 'kolab' )
+  DESC 'Kolab attribute'
+  SUP name )
+
+# kolabDeleteflag used to be a boolean but describes with Kolab 2
+# the fqdn of the server which is requested to delete this objects
+# in its local store
+attributetype ( 1.3.6.1.4.1.19414.2.1.2
+  NAME 'kolabDeleteflag'
+  DESC 'Per host deletion status'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+# alias used to provide alternative rfc822 email addresses for kolab users
+attributetype ( 1.3.6.1.4.1.19414.2.1.3
+  NAME 'alias'
+  DESC 'RFC1274: RFC822 Mailbox'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+# kolabEncryptedPassword is an asymmetrically (RSA) encrypted copy of the
+# cleartext password. This is required in order to pass the password from
+# the maintainance/administration application to the kolabHomeServer running the
+# resource handler application in a secure manner.
+# Actually this attribute is deprecated as of Kolab 2.1. Instead we grant the
+# calendar user dn: cn=calendar,cn=internal,dc=yourcompany,dc=com access to
+# the respective calendar folder using IMAP ACLs.
+attributetype ( 1.3.6.1.4.1.19414.2.1.4
+  NAME 'kolabEncryptedPassword'
+  DESC 'base64 encoded public key encrypted Password'
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+
+# hostname including the domain name like kolab-master.yourcompany.com
+attributetype ( 1.3.6.1.4.1.19414.2.1.5
+  NAME ( 'fqhostname' 'fqdnhostname' )
+  DESC 'Fully qualified Hostname including full domain component'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+# fqdn of all hosts in a multi-location or cluster setup
+attributetype ( 1.3.6.1.4.1.19414.2.1.6
+  NAME 'kolabHost'
+  DESC 'Multivalued -- list of hostnames in a Kolab setup'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+# fqdn of the server containg the actual user mailbox
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.1
+  NAME 'kolabHomeServer'
+  DESC 'server which keeps the users mailbox'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+# flag for allowing unrestriced length of mails
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.2
+  NAME 'unrestrictedMailSize'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# Specifies the email delegates.
+# An email delegate can send email on behalf of the account
+# which means using the "from" of the account.
+# Delegates are specified by the syntax of rfc822 email addresses.
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.3
+  NAME 'kolabDelegate'
+  DESC 'Kolab user allowed to act as delegates - RFC822 Mailbox/Alias'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+# For user, group and resource Kolab accounts
+# Describes how to respond to invitations
+# We keep the attribute as a string, but actually it can only have one
+# of the following values:
+#
+#  ACT_ALWAYS_ACCEPT
+#  ACT_ALWAYS_REJECT
+#  ACT_REJECT_IF_CONFLICTS
+#  ACT_MANUAL_IF_CONFLICTS
+#  ACT_MANUAL
+# In addition one of these values may be prefixed with a primary email
+# address followed by a colon like
+# user@domain.tld: ACT_ALWAYS_ACCEPT
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.4
+  NAME ( 'kolabInvitationPolicy' 'kolabResourceAction' )
+  DESC 'defines how to respond to invitations'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+# time span from now to the future used for the free busy data
+# measured in days
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.5
+  NAME 'kolabFreeBusyFuture'
+  DESC 'time in days for fb data towards the future'
+  EQUALITY integerMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
+  SINGLE-VALUE )
+
+# time span from now to the past used for the free busy data
+# measured in days
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.6
+  NAME 'kolabFreeBusyPast'
+  DESC 'time in days for fb data towards the past'
+  EQUALITY integerMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
+  SINGLE-VALUE )
+
+# fqdn of the server as the default SMTP MTA
+# not used in Kolab 2 currently as in Kolab 2 the
+# default MTA is equivalent to the kolabHomeServer
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.7
+  NAME 'kolabHomeMTA'
+  DESC 'fqdn of default MTA'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256}
+  SINGLE-VALUE )
+
+# Begin date of Kolab vacation period. Sender will
+# be notified every kolabVacationResendIntervall days
+# that recipient is absent until kolabVacationEnd.
+# Values in this syntax are encoded as printable strings,
+# represented as specified in X.208.
+# Note that the time zone must be specified.
+# For Kolab we limit ourself to  GMT
+# YYYYMMDDHHMMZ e.g. 200512311458Z.
+# see also: rfc 2252.
+# Currently this attribute is not used in Kolab.
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.8
+  NAME 'kolabVacationBeginDateTime'
+  DESC 'Begin date of vacation'
+  EQUALITY generalizedTimeMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.24
+  SINGLE-VALUE )
+
+# End date of Kolab vacation period. Sender will
+# be notified every kolabVacationResendIntervall days
+# that recipient is absent starting from kolabVacationBeginDateTime.
+# Values in this syntax are encoded as printable strings,
+# represented as specified in X.208.
+# Note that the time zone must be specified.
+# For Kolab we limit ourself to  GMT
+# YYYYMMDDHHMMZ e.g. 200601012258Z.
+# see also: rfc 2252.
+# Currently this attribute is not used in Kolab.
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.9
+  NAME 'kolabVacationEndDateTime'
+  DESC 'End date of vacation'
+  EQUALITY generalizedTimeMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.24
+  SINGLE-VALUE )
+
+# Intervall in days after which senders get
+# another vacation message.
+# Currently this attribute is not used in Kolab.
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.10
+  NAME 'kolabVacationResendInterval'
+  DESC 'Vacation notice interval in days'
+  EQUALITY integerMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
+  SINGLE-VALUE )
+
+# Email recipient addresses which are handled by the
+# vacation script. There can be multiple kolabVacationAddress
+# entries for each kolabInetOrgPerson.
+# Default is the primary email address and all
+# email aliases of the kolabInetOrgPerson.
+# Currently this attribute is not used in Kolab.
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.11
+  NAME 'kolabVacationAddress'
+  DESC 'Email address for vacation to response upon'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+# Enable sending vacation notices in reaction
+# unsolicited commercial email.
+# Default is no.
+# Currently this attribute is not used in Kolab.
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.12
+  NAME 'kolabVacationReplyToUCE'
+  DESC 'Enable vacation notices to UCE'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
+  SINGLE-VALUE )
+
+# Email recipient domains which are handled by the
+# vacation script. There can be multiple kolabVacationReactDomain
+# entries for each kolabInetOrgPerson
+# Default is to handle all domains.
+# Currently this attribute is not used in Kolab.
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.13
+  NAME 'kolabVacationReactDomain'
+  DESC 'Multivalued -- Email domain for vacation to response upon'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+# Forward all incoming emails except UCE if kolabForwardUCE
+# is not set to this email address.
+# There can be multiple kolabForwardAddress entries for
+# each kolabInetOrgPerson.
+# Currently this attribute is not used in Kolab.
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.14
+  NAME 'kolabForwardAddress'
+  DESC 'Forward email to this address'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+# Keep local copy when forwarding emails to list of
+# kolabForwardAddress.
+# Default is no.
+# Currently this attribute is not used in Kolab.
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.15
+  NAME 'kolabForwardKeepCopy'
+  DESC 'Keep copy when forwarding'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
+  SINGLE-VALUE )
+
+# Enable forwarding of UCE.
+# Default is yes.
+# Currently this attribute is not used in Kolab.
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.16
+  NAME 'kolabForwardUCE'
+  DESC 'Enable forwarding of mails known as UCE'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
+  SINGLE-VALUE )
+
+# comment when creating or deleting a kolab object
+# a comment might be appropriate. This is most useful
+# for tracability when users get moved to the graveyard
+# instead of being really deleted. Every entry must be prefixed
+# with an ISO 8601 date string e.g 200604301458Z. All times must
+# be in zulu timezone.
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.17
+  NAME 'kolabComment'
+  DESC 'multi-value comment'
+  EQUALITY caseIgnoreMatch
+  SUBSTR caseIgnoreSubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{1024} )
+
+# describes the allowed or disallowed smtp addresses for
+# recipients. If this attribute is not set for a user no
+# kolab recipient policy does apply.
+# example entries:
+# .tld             - allow mail to every recipient for this tld
+# domain.tld       - allow mail to everyone in domain.tld
+# .domain.tld      - allow mail to everyone in domain.tld and its subdomains
+# user@domain.tld  - allow mail to explicit user@domain.tld
+# user@            - allow mail to this user but any domain
+# -.tld            - disallow mail to every recipient for this tld
+# -domain.tld      - disallow mail to everyone in domain.tld
+# -.domain.tld     - disallow mail to everyone in domain.tld and its subdomains
+# -user@domain.tld - disallow mail to explicit user@domain.tld
+# -user@           - disallow mail to this user but any domain
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.18
+  NAME 'kolabAllowSMTPRecipient'
+  DESC 'SMTP address allowed for destination (multi-valued)'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{512} )
+
+# Create the user mailbox on the kolabHomeServer only.
+# Default is no.
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.19
+  NAME 'kolabHomeServerOnly'
+  DESC 'Create the user mailbox on the kolabHomeServer only'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
+  SINGLE-VALUE )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.20
+  NAME 'kolabMaritalStatus'
+  DESC 'ledig(0), verh.(1)} DEFAULT ledig'
+  EQUALITY integerMatch
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27{1} )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.21
+  NAME ( 'homeFacsimileTelephoneNumber' 'homeFaxNumber' )
+  DESC 'private facsimilie telephone number'
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.50{32} )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.25
+  NAME 'bylawURI'
+  DESC 'URI pointing at the bylaw'
+  SUP labeledURI
+  SINGLE-VALUE )
+
+# Single string with $ seperated lines consisting of
+# surname $
+# givenName $
+# dateOfBirth $
+# restrictions $
+# signer of contract ('true'/'false')
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.27
+  NAME 'legalRepresentative'
+  DESC 'legal representative'
+  EQUALITY caseIgnoreListMatch
+  SUBSTR caseIgnoreListSubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.41 )
+
+# Single string with $ seperated lines consisting of
+# surname $
+# givenName $
+# dateOfBirth $
+# restrictions $
+# signer of contract ('true'/'false')
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.28
+  NAME 'commercialProcuration'
+  DESC 'described person which has commercial procuration'
+  EQUALITY caseIgnoreListMatch
+  SUBSTR caseIgnoreListSubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.41 )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.29
+  NAME 'legalRepresentationPolicy'
+  DESC 'described how legal representation works'
+  EQUALITY caseIgnoreMatch
+  SUBSTR caseIgnoreSubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.31
+  NAME 'inLiquidation'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.32
+  NAME 'tradeRegisterRegisteredCapital'
+  EQUALITY integerMatch
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.33
+  NAME 'tradeRegisterType'
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.36
+  NAME 'tradeRegisterURI'
+  SUP labeledURI
+  SINGLE-VALUE )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.37
+  NAME 'tradeRegisterLastChangedDate'
+  EQUALITY generalizedTimeMatch
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.38
+  NAME 'kolabGermanBankAccountNumber'
+  DESC 'The 8-digits number of a german bank account without spaces'
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.36{10} )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.39
+  NAME 'kolabGermanBankCode'
+  DESC 'The 8-digits number of a german bank code (BLZ) without spaces'
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.36{8} )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.40
+  NAME 'kolabGermanBankName'
+  DESC 'The name of a german bank registered in the BLZ table published by Deutsche Bundesbank.'
+  SUP name
+  SINGLE-VALUE )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.41
+  NAME 'kolabGermanBankAccountInfo'
+  DESC 'Composed field containing a one-line human-readable representation of all necessary information.'
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.42
+  NAME 'kolabGermanBankAccountHolder'
+  DESC 'The name of the holder of a german bank account commonly used as recipient name.'
+  SINGLE-VALUE
+  SUP name )
+
+# describes the allowed or disallowed smtp addresses for
+# recipients. If this attribute is not set for a user no
+# kolab recipient policy does apply.
+# example entries:
+# .tld             - allow mail to every recipient for this tld
+# domain.tld       - allow mail to everyone in domain.tld
+# .domain.tld      - allow mail to everyone in domain.tld and its subdomains
+# user@domain.tld  - allow mail to explicit user@domain.tld
+# user@            - allow mail to this user but any domain
+# -.tld            - disallow mail to every recipient for this tld
+# -domain.tld      - disallow mail to everyone in domain.tld
+# -.domain.tld     - disallow mail to everyone in domain.tld and its subdomains
+# -user@domain.tld - disallow mail to explicit user@domain.tld
+# -user@           - disallow mail to this user but any domain
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.43
+  NAME 'kolabAllowSMTPFrom'
+  DESC 'SMTP address accepted for receiving (multi-valued)'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{512} )
+
+attributetype ( 1.3.6.1.4.1.19414.1.1.1.44
+  NAME 'kolabSalutation'
+  DESC 'Salutation like Mr., Mrs, Herr, Frau)'
+  EQUALITY caseIgnoreMatch
+  SUBSTR caseIgnoreSubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{64} )
+
+# kolabFolderType describes the kind of Kolab folder
+# as defined in the kolab format specification.
+# We will annotate all folders with an entry
+# /vendor/kolab/folder-type containing the attribute
+# value.shared set to: <type>[.<subtype>].
+# The <type> can be: mail, event, journal, task, note,
+# or contact. The <subtype> for a mail folder can be
+# inbox, drafts, sentitems, or junkemail (this one holds
+# spam mails). For the other <type>s, it can only be
+# default, or not set.  For other types of folders
+# supported by the clients, these should be prefixed with
+# "k-" for KMail, "h-" for Horde and "o-" for Outlook, and
+# look like for example "kolab.o-voicemail". Other third-party
+# clients shall use the "x-" prefix.
+# We then use the ANNOTATEMORE IMAP extension to
+# associate the folder type with a folder.
+attributetype ( 1.3.6.1.4.1.19414.2.1.7
+  NAME 'kolabFolderType'
+  DESC 'type of a kolab folder'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256}
+  SINGLE-VALUE )
+
+######################
+# postfix attributes #
+######################
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.501
+  NAME 'postfix-mydomain'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.502
+  NAME 'postfix-relaydomains'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.503
+  NAME 'postfix-mydestination'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.504
+  NAME 'postfix-mynetworks'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.505
+  NAME 'postfix-relayhost'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.506
+  NAME 'postfix-transport'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.507
+  NAME 'postfix-enable-virus-scan'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
+  SINGLE-VALUE )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.508
+  NAME 'postfix-allow-unauthenticated'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
+  SINGLE-VALUE )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.509
+  NAME 'postfix-virtual'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.510
+  NAME 'postfix-relayport'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.511
+  NAME 'postfix-message-size-limit'
+  EQUALITY integerMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 )
+
+##########################
+# cyrus imapd attributes #
+##########################
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.601
+  NAME 'cyrus-autocreatequota'
+  EQUALITY integerMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
+  SINGLE-VALUE )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.602
+  NAME 'cyrus-admins'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+# enable plain imap without ssl
+attributetype ( 1.3.6.1.4.1.19414.2.1.603
+  NAME 'cyrus-imap'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
+  SINGLE-VALUE )
+
+# enable legacy pop3
+attributetype ( 1.3.6.1.4.1.19414.2.1.604
+  NAME 'cyrus-pop3'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# user specific quota on the cyrus imap server
+attributetype ( 1.3.6.1.4.1.19414.2.1.605
+  NAME 'cyrus-userquota'
+  DESC 'Mailbox hard quota limit in MB'
+  EQUALITY integerMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 )
+
+# cyrus imapd access control list
+# acls work with users and groups
+attributetype ( 1.3.6.1.4.1.19414.2.1.651
+  NAME 'acl'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+# enable secure imap
+attributetype ( 1.3.6.1.4.1.19414.2.1.606
+  NAME 'cyrus-imaps'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# enable secure pop3
+attributetype ( 1.3.6.1.4.1.19414.2.1.607
+  NAME 'cyrus-pop3s'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# enable sieve support (required for forward and vacation services)
+attributetype ( 1.3.6.1.4.1.19414.2.1.608
+  NAME 'cyrus-sieve'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# installation wide percentage which determines when to send a
+# warning to the user
+attributetype ( 1.3.6.1.4.1.19414.2.1.609
+  NAME 'cyrus-quotawarn'
+  EQUALITY integerMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 )
+
+# enable smmap support
+attributetype ( 1.3.6.1.4.1.19414.2.1.610
+  NAME 'cyrus-smmap'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# enable fulldirhash support
+attributetype ( 1.3.6.1.4.1.19414.2.1.611
+  NAME 'cyrus-fulldirhash'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# enable hashimapspool support
+attributetype ( 1.3.6.1.4.1.19414.2.1.612
+  NAME 'cyrus-hashimapspool'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# enable squatter support
+attributetype ( 1.3.6.1.4.1.19414.2.1.613
+  NAME 'cyrus-squatter'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+
+#############################
+# apache and php attributes #
+#############################
+
+# enable plain http (no ssl)
+attributetype ( 1.3.6.1.4.1.19414.2.1.701
+  NAME 'apache-http'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# Allow freebusy download without authenticating first
+attributetype ( 1.3.6.1.4.1.19414.2.1.702
+  NAME 'apache-allow-unauthenticated-fb'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+##########################
+# kolabfilter attributes #
+##########################
+
+# enable trustable From:
+attributetype ( 1.3.6.1.4.1.19414.2.1.750
+  NAME 'kolabfilter-verify-from-header'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# should Sender header be allowed instead of From
+# when present?
+attributetype ( 1.3.6.1.4.1.19414.2.1.751
+  NAME 'kolabfilter-allow-sender-header'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# Should reject messages with From headers that dont match
+# the envelope? Default is to rewrite the header
+attributetype ( 1.3.6.1.4.1.19414.2.1.752
+  NAME 'kolabfilter-reject-forged-from-header'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# Enable the Kolab Policy Daemon. If false or not
+# set don't use the Kolab Policy Daemon
+attributetype ( 1.3.6.1.4.1.19414.2.1.800
+  NAME 'kolabPolicyDaemon'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# Configurable list of ciphers considered to be secure enough for our purposes.
+# E.g. TLS 1.0 and SSL 3.0
+attributetype ( 1.3.6.1.4.1.19414.2.1.801
+  NAME 'kolabSecureCiphers'
+  DESC 'comma separated list of ciphers considered to be secure'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+
+######################################################
+# proftpd attributes (unused since Kolab Server 2.2) #
+######################################################
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.901
+  NAME 'proftpd-defaultquota'
+  EQUALITY integerMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.902
+  NAME 'proftpd-ftp'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.903
+  NAME 'proftpd-userPassword'
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+
+########################################################################
+# pop3 service attributes (suitable to integrate external pop3 sources #
+########################################################################
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.1001
+  NAME 'externalPop3AccountDescription'
+  DESC 'a human readable description of the external POP3 account e.g. my gmail account'
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{1024} )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.1002
+  NAME 'externalPop3AccountMail'
+  DESC 'email address associated with the external POP3 account e.g. givenname.surname@gmail.com'
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.1003
+  NAME 'externalPop3AccountServer'
+  DESC 'Pop3 server associated with the external POP3 account e.g. pop3.provider.com'
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.1004
+  NAME 'externalPop3AccountPort'
+  DESC 'TCP port number used for pop3 service associated with the external POP3 account e.g. 110'
+  EQUALITY integerMatch
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27{5} )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.1005
+  NAME 'externalPop3AccountUseSSL'
+  DESC 'boolean defining if SSL must be used for external POP3 account - requires suitable externalPop3AccountPort'
+  EQUALITY booleanMatch
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.1006
+  NAME 'externalPop3AccountUseTLS'
+  DESC 'boolean defining if TLS must be used for external POP3 account'
+  EQUALITY booleanMatch
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+# sometimes useful for self-signed certificates
+attributetype ( 1.3.6.1.4.1.19414.2.1.1007
+  NAME 'externalPop3AccountCheckServerCertificate'
+  DESC 'allows to disable checking server certificates when using SSL or TLS - beware of MIT-attacks!'
+  EQUALITY booleanMatch
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.1008
+  NAME 'externalPop3AccountLoginName'
+  DESC 'name used to login into pop3 account often this uid is equivalent to the email address'
+  SINGLE-VALUE 
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.1009
+  NAME 'externalPop3EncryptedAccountPassword'
+  DESC 'encryped password for the external POP3 account - secret key must be known to the pop3 fetch service'
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.40)
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.1010
+  NAME 'externalPop3AccountKeepMailOnServer'
+  DESC 'controls if fetched message shall remain on external POP3 server - beware this is often unreliable'
+  EQUALITY booleanMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
+
+attributetype ( 1.3.6.1.4.1.19414.2.1.1011
+  NAME 'externalPop3AccountLoginMethod'
+  DESC 'login method used for external POP3 account - currently these are plainText, LOGIN, PLAIN, NTLM, DIGEST-MD5, CRAM-MD5, GSSAPI and APOP'
+  EQUALITY caseIgnoreIA5Match
+  SUBSTR caseIgnoreIA5SubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{32} )
+
+########################
+# external definitions #
+########################
+
+# extended from apple.schema
+attributetype ( 1.3.6.1.4.1.63.1000.1.1.1.1.27
+  NAME ( 'apple-birthday' 'dateOfBirth' 'dateOfIncorporation' )
+  DESC 'Birthday or date of incorporation'
+  EQUALITY generalizedTimeMatch
+  SUBSTR caseExactIA5SubstringsMatch
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 )
+
+# from http://www.stroeder.com/stroeder.com.schema
+attributetype ( 1.3.6.1.4.1.5427.1.389.4.12
+  NAME ( 'birthPlace' 'placeOfBirth' )
+  DESC 'Place of birth'
+  SUP name
+  SINGLE-VALUE )
+
+# from http://www.stroeder.com/stroeder.com.schema
+attributetype ( 1.3.6.1.4.1.5427.1.389.4.14
+  NAME 'birthName'
+  DESC 'Last name at time of birth, e.g. maiden name'
+  SUP name
+  SINGLE-VALUE )
+
+# from http://www.stroeder.com/stroeder.com.schema
+# The following data items and codes are used (see ISO 5218):
+#       Not known       0
+#       Male            1
+#       Female          2
+#       Not specified   9
+#
+attributetype ( 1.3.6.1.4.1.5427.1.389.4.7
+  NAME 'gender'
+  DESC 'Representation of human sex (see ISO 5218)'
+  EQUALITY integerMatch
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27{1} )
+
+# from http://www.stroeder.com/stroeder.com.schema
+# tax ID of person or company within Germany
+#
+attributetype ( 1.3.6.1.4.1.5427.1.389.4.666
+  NAME 'germanTaxId'
+  DESC 'tax ID of person or company within Germany'
+  EQUALITY caseIgnoreMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{20} )
+
+# rfc 3039
+# ISO 3166 Country Code
+# multiple citizenships are possible!
+attributetype ( 1.3.6.1.5.5.7.9.4
+  NAME 'countryOfCitizenship'
+  DESC 'Country of citizenship'
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.11 )
+
+# ISO 3166 Country Code
+attributetype ( 1.3.6.1.5.5.7.9.5
+  NAME 'countryOfResidence'
+  DESC 'Country of residence'
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.11 )
+
+# http://www.daasi.de/
+attributetype ( 1.3.6.1.4.1.5062.1.1.3.16
+  NAME 'legalForm'
+  DESC 'legal form of a company'
+  EQUALITY caseIgnoreMatch
+  SUBSTR caseIgnoreSubstringsMatch
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+
+# http://www.daasi.de/
+# location of the trade register authority
+attributetype ( 1.3.6.1.4.1.5062.1.1.3.17
+  NAME 'tradeRegisterLocation'
+  DESC 'Location of the trade registrar where the organization is registered'
+  SUP name
+  SINGLE-VALUE )
+
+# http://www.daasi.de/
+# registration number a the trade register authority
+attributetype ( 1.3.6.1.4.1.5062.1.1.3.18
+  NAME 'tradeRegisterIdentifier'
+  DESC 'Idientifier with which an organization is registered'
+  EQUALITY caseIgnoreMatch
+  SUBSTR caseIgnoreSubstringsMatch
+  SINGLE-VALUE
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+
+# https://forxa.mancomun.org/plugins/scmsvn/viewcvs.php/trunk/ldap/dxpisi.schema?annotate=29&root=mancomun
+# VATNumber
+# Identifier number for companies and persons. In Spain it is the same as NIF/CIF.
+# In Germany it is called Umsatzsteueridentifikationsnummer.
+attributetype ( 1.3.6.1.4.1.27994.1.3.4
+  NAME 'VATNumber'
+  DESC 'Identifier number for companies and persons'
+  EQUALITY caseIgnoreMatch
+  SUBSTR caseIgnoreSubstringsMatch
+  SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{10} )
+
+########################
+# kolab object classes #
+########################
+
+# main kolab server configuration
+# storing global values and user specific default values
+# like kolabFreeBusyFuture and kolabFreeBusyPast
+objectclass ( 1.3.6.1.4.1.19414.2.2.1
+  NAME 'kolab'
+  DESC 'Kolab server configuration'
+  SUP top STRUCTURAL
+  MUST k
+  MAY ( kolabHost $
+        postfix-mydomain $
+        postfix-relaydomains $
+        postfix-mydestination $
+        postfix-mynetworks $
+        postfix-relayhost $
+        postfix-relayport $
+        postfix-transport $
+        postfix-virtual $
+        postfix-enable-virus-scan $
+        postfix-allow-unauthenticated $
+        postfix-message-size-limit $
+        cyrus-quotawarn $
+        cyrus-autocreatequota $
+        cyrus-admins $
+        cyrus-imap $
+        cyrus-pop3 $
+        cyrus-imaps $
+        cyrus-pop3s $
+        cyrus-sieve $
+        cyrus-smmap $
+        cyrus-fulldirhash $
+        cyrus-hashimapspool $
+        cyrus-squatter $
+        apache-http $
+        apache-allow-unauthenticated-fb $
+        kolabfilter-verify-from-header $
+        kolabfilter-allow-sender-header $
+        kolabfilter-reject-forged-from-header $
+        kolabPolicyDaemon $
+        kolabSecureCiphers $
+        proftpd-ftp $
+        proftpd-defaultquota $
+        kolabFreeBusyFuture $
+        kolabFreeBusyPast $
+        uid $
+        userPassword ) )
+
+# public folders are typically visible to everyone subscribed to
+# the server without the need for an extra login. Subfolders are
+# defined using the hiarchy seperator '/' e.g. "sf/sub1". Please note
+# that the term public folder is prefered to shared folder because
+# normal user mailboxes can also share folders using acls.
+objectclass ( 1.3.6.1.4.1.19414.2.2.9
+  NAME 'kolabSharedFolder'
+  DESC 'Kolab public shared folder'
+  SUP top STRUCTURAL
+  MUST cn
+  MAY ( acl $
+        alias $
+        cyrus-userquota $
+        kolabHomeServer $
+        kolabFolderType $
+        kolabDeleteflag ) )
+
+# kolabNamedObject is used as a plain node for the LDAP tree.
+# In contrast to unix filesystem directories LDAP nodes can
+# and often do also have contents/attributes. We use the
+# kolabNamedObject in order to put some structure in the
+# LDAP directory tree.
+objectclass ( 1.3.6.1.4.1.5322.13.1.1
+  NAME 'kolabNamedObject'
+  SUP top STRUCTURAL
+  MAY (cn $ ou) )
+
+# kolab account
+# we use an auxiliary in order to ease integration
+# with existing inetOrgPerson objects
+# Please note that userPassword is a may
+# attribute in the schema but is mandatory for
+# Kolab
+objectclass ( 1.3.6.1.4.1.19414.3.2.2
+  NAME 'kolabInetOrgPerson'
+  DESC 'Kolab Internet Organizational Person'
+  SUP top AUXILIARY
+  MAY ( c $
+        alias $
+        pseudonym $
+        kolabHomeServer $
+        kolabHomeServerOnly $
+        kolabHomeMTA $
+        unrestrictedMailSize $
+        kolabDelegate $
+        kolabEncryptedPassword $
+        cyrus-userquota $
+        kolabInvitationPolicy $
+        kolabFreeBusyFuture $
+        calFBURL $
+        kolabVacationBeginDateTime $
+        kolabVacationEndDateTime $
+        kolabVacationResendInterval $
+        kolabVacationAddress $
+        kolabVacationReplyToUCE $
+        kolabVacationReactDomain $
+        kolabForwardAddress $
+        kolabForwardKeepCopy $
+        kolabForwardUCE $
+        kolabAllowSMTPRecipient $
+        kolabAllowSMTPFrom $
+        kolabSalutation $
+        kolabMaritalStatus $
+        dateOfBirth $
+        placeOfBirth $
+        birthName $
+        gender $
+        homeFacsimileTelephoneNumber $
+        countryOfCitizenship $
+        countryOfResidence $
+        legalForm $
+        tradeRegisterLocation $
+        tradeRegisterIdentifier $
+        VATNumber $
+        germanTaxId $
+        kolabDeleteflag $
+        kolabComment ) )
+
+# kolab organization with country support
+objectclass ( 1.3.6.1.4.1.19414.3.2.3
+  NAME 'kolabOrganization'
+  DESC 'RFC2256: a Kolab organization'
+  SUP organization STRUCTURAL
+  MAY ( c $
+        mail $
+        kolabDeleteflag $
+        alias ) )
+
+# kolab organizational unit with country support
+objectclass ( 1.3.6.1.4.1.19414.3.2.4
+  NAME 'kolabOrganizationalUnit'
+  DESC 'a Kolab organizational unit'
+  SUP organizationalUnit STRUCTURAL
+  MAY ( c $
+        mail $
+        kolabDeleteflag $
+        alias ) )
+
+# kolab groupOfNames with extra kolabDeleteflag and the required
+# attribute mail.
+# The mail attribute for kolab objects of the type kolabGroupOfNames
+# is not arbitrary but MUST be a single attribute of the form
+# of an valid SMTP address with the CN as the local part.
+# E.g cn@kolabdomain (e.g. employees@mydomain.com). The
+# mail attribute MUST be globally unique.
+objectclass ( 1.3.6.1.4.1.19414.3.2.5
+  NAME 'kolabGroupOfNames'
+  DESC 'Kolab group of names (DNs) derived from RFC2256'
+  SUP groupOfNames STRUCTURAL
+  MAY ( mail $
+        kolabDeleteflag ) )
+
+objectclass ( 1.3.6.1.4.1.19414.3.2.6
+  NAME 'kolabExternalPop3Account'
+  DESC 'kolab fetch messages via POP3 from external sources'
+  SUP top STRUCTURAL
+  MUST ( externalPop3AccountServer $
+         externalPop3AccountLoginName $
+         externalPop3EncryptedAccountPassword )
+  MAY ( externalPop3AccountDescription $
+        externalPop3AccountMail $
+        externalPop3AccountPort $
+        externalPop3AccountUseSSL $
+        externalPop3AccountUseTLS $
+        externalPop3AccountLoginMethod $
+        externalPop3AccountCheckServerCertificate $
+        externalPop3AccountKeepMailOnServer ) )
+
+objectclass ( 1.3.6.1.4.1.19414.3.2.7
+  NAME 'kolabGermanBankArrangement'
+  DESC 'German bank account information'
+  SUP top STRUCTURAL
+  MUST ( kolabGermanBankAccountNumber $
+         kolabGermanBankCode )
+  MAY ( kolabGermanBankAccountHolder $
+        kolabGermanBankName $
+        kolabGermanBankAccountInfo ) )

pykolab-0.7.tar.gz/share/templates/roundcubemail/kolab_addressbook.inc.php.tpl Deleted

pykolab-0.7.tar.gz/test-wallace.py Added

@@ -0,0 +1,102 @@
+#!/usr/bin/python
+#
+# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
+#
+# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+import smtplib
+import socket
+import sys
+
+# For development purposes
+sys.path.extend(['.', '..'])
+
+from email.MIMEMultipart import MIMEMultipart
+from email.MIMEBase import MIMEBase
+from email.MIMEText import MIMEText
+from email.Utils import COMMASPACE, formatdate
+from email import Encoders
+
+def send_mail(send_from, send_to, send_with=None):
+    smtp = smtplib.SMTP("localhost", 10026)
+    smtp.set_debuglevel(True)
+    subject = "This is a Kolab load test mail"
+    text = """Hi there,
+
+I am a Kolab Groupware test email, generated by a script that makes
+me send lots of email to lots of people using one account and a bunch
+of delegation blah.
+
+Your response, though completely unnecessary, would be appreciated, because
+being a fictitious character doesn't do my address book of friends any good.
+
+Kind regards,
+
+Lucy Meier.
+"""
+
+    msg = MIMEMultipart()
+    msg['From'] = send_from
+    msg['To'] = COMMASPACE.join(send_to)
+    msg['Date'] = formatdate(localtime=True)
+    msg['Subject'] = subject
+
+    msg.attach( MIMEText(text) )
+
+    #msg.attach( MIMEBase('application', open('/boot/initrd-plymouth.img').read()) )
+
+    smtp.sendmail(send_from, send_to, msg.as_string())
+
+if __name__ == "__main__":
+    #send_to = [
+            #'Jeroen van Meeuwen <jeroen.vanmeeuwen@klab.cc>',
+            #'Aleksander Machniak <aleksander.machniak@klab.cc>',
+            #'Georg Greve <georg.greve@klab.cc>',
+            #'Paul Adams <paul.adams@klab.cc>',
+            #'Thomas Broderli <thomas.broderli@klab.cc>',
+            #'Christoph Wickert <christoph.wickert@klab.cc>',
+            #'Lucy Meier <lucy.meier@klab.cc>',
+        #]
+
+
+    #send_mail(
+            #'Jeroen van Meeuwen <jeroen.vanmeeuwen@klab.cc>',
+            #send_to
+        #)
+
+    #send_mail(
+            #'Lucy Meier on behalf of Paul Adams <paul.adams@test90.kolabsys.com>',
+            #send_to
+        #)
+
+    #send_mail(
+            #'Lucy Meier on behalf of Georg Greve <georg.greve@test90.kolabsys.com>',
+            #send_to
+        #)
+
+    send_to = [
+            'Jeroen van Meeuwen (REJECT) <vanmeeuwen+reject@kolabsys.com>',
+            'Jeroen van Meeuwen (HOLD) <vanmeeuwen+hold@kolabsys.com>',
+            'Jeroen van Meeuwen (DEFER) <vanmeeuwen+defer@kolabsys.com>',
+            'Jeroen van Meeuwen (ACCEPT) <vanmeeuwen+accept@kolabsys.com>',
+            'Jeroen "kanarip" van Meeuwen (ACCEPT) <kanarip+accept@kolabsys.com>',
+            'Jeroen "kanarip" van Meeuwen (REJECT) <kanarip+reject@kolabsys.com>',
+            'Lucy Meier (REJECT) <meier+reject@kolabsys.com>',
+            'Georg Greve (REJECT) <greve+reject@kolabsys.com>',
+        ]
+
+    send_mail('Jeroen van Meeuwen <vanmeeuwen@kolabsys.com>', send_to)

pykolab-0.7.tar.gz/tests/functional/test_kolabd/test_004_many_aliases.py Deleted

@@ -1,53 +0,0 @@
-import time
-import unittest
-
-import pykolab
-from pykolab import wap_client
-from pykolab.auth import Auth
-from pykolab.imap import IMAP
-
-conf = pykolab.getConf()
-
-class TestKolabDaemon(unittest.TestCase):
-    @classmethod
-    def setup_class(self, *args, **kw):
-        from tests.functional.purge_users import purge_users
-        purge_users()
-
-#    @classmethod
-#    def teardown_class(self, *args, **kw):
-#        from tests.functional.purge_users import purge_users
-#        purge_users()
-
-    def test_001_create_user(self):
-        from tests.functional.user_add import user_add
-        user_add("John", "Doe")
-
-        time.sleep(3)
-
-        auth = Auth()
-        auth.connect()
-
-        max_tries = 20
-        while max_tries > 0:
-            recipient = auth.find_recipient('john.doe@example.org')
-
-            if not recipient:
-                time.sleep(1)
-                max_tries -= 1
-            else:
-                break
-
-        imap = IMAP()
-        imap.connect()
-
-        folders = imap.lm('user/john.doe@example.org')
-        self.assertEqual(len(folders), 1, "No INBOX found for user John")
-
-    def test_002_add_aliases(self):
-        auth = Auth()
-        auth.connect()
-
-        recipient = auth.find_recipient('john.doe@example.org')
-        wap_client.user_edit(recipient, {'alias': ['webmaster@example.org', 'root@example.org', 'postmaster@example.org', 'hostmaster@example.org']})
-

pykolab-0.7.tar.gz/tests/functional/test_wallace/test_005_resource_invitation.py Changed

@@ -11,6 +11,7 @@
 from pykolab.translate import _
 from pykolab.xml import event_from_message
 from pykolab.xml import participant_status_label
+from pykolab.itip import events_from_message
 from email import message_from_string
 from twisted.trial import unittest
 
@@ -220,6 +221,7 @@
 
         self.room1 = funcs.resource_add("confroom", "Room 101", owner=self.jane['dn'], kolabinvitationpolicy='ACT_ACCEPT_AND_NOTIFY')
         self.room2 = funcs.resource_add("confroom", "Conference Room B-222")
+        self.room3 = funcs.resource_add("confroom", "CEOs Office 303", owner=self.jane['dn'], kolabinvitationpolicy='ACT_MANUAL')
         self.rooms = funcs.resource_add("collection", "Rooms", [ self.room1['dn'], self.room2['dn'] ], self.jane['dn'], kolabinvitationpolicy='ACT_ACCEPT_AND_NOTIFY')
 
         time.sleep(1)
@@ -232,6 +234,7 @@
 
         smtp = smtplib.SMTP('localhost', 10026)
         smtp.sendmail(from_addr, to_addr, mime_message % (to_addr, itip_payload))
+        smtp.quit()
 
     def send_itip_invitation(self, resource_email, start=None, allday=False, template=None):
         if start is None:
@@ -339,6 +342,8 @@
 
             time.sleep(1)
 
+        imap.disconnect()
+
         return found
 
     def purge_mailbox(self, mailbox):
@@ -621,3 +626,82 @@
         notify = self.check_message_received(_('Booking for %s has been %s') % (delegatee['cn'], participant_status_label('ACCEPTED')), delegatee['mail'], self.jane['mailbox'])
         self.assertIsInstance(notify, email.message.Message)
         self.assertIn(self.john['mail'], notification_text)
+
+
+    def test_013_owner_confirmation_accept(self):
+        self.purge_mailbox(self.john['mailbox'])
+        self.purge_mailbox(self.jane['mailbox'])
+
+        uid = self.send_itip_invitation(self.room3['mail'], datetime.datetime(2014,9,12, 14,0,0))
+
+        # requester (john) gets a TENTATIVE confirmation
+        response = self.check_message_received(self.itip_reply_subject % { 'summary':'test', 'status':participant_status_label('TENTATIVE') }, self.room3['mail'])
+        self.assertIsInstance(response, email.message.Message)
+
+        event = self.check_resource_calendar_event(self.room3['kolabtargetfolder'], uid)
+        self.assertIsInstance(event, pykolab.xml.Event)
+        self.assertEqual(event.get_summary(), "test")
+        self.assertEqual(event.get_attendee_by_email(self.room3['mail']).get_participant_status(True), 'TENTATIVE')
+
+        # check confirmation message sent to resource owner (jane)
+        notify = self.check_message_received(_('Booking request for %s requires confirmation') % (self.room3['cn']), mailbox=self.jane['mailbox'])
+        self.assertIsInstance(notify, email.message.Message)
+
+        itip_event = events_from_message(notify)[0]
+
+        # resource owner confirms reservation request
+        itip_reply = itip_event['xml'].to_message_itip(self.jane['mail'],
+            method="REPLY",
+            participant_status='ACCEPTED',
+            message_text="Request accepted",
+            subject=_('Booking for %s has been %s') % (self.room3['cn'], participant_status_label('ACCEPTED'))
+        )
+
+        smtp = smtplib.SMTP('localhost', 10026)
+        smtp.sendmail(self.jane['mail'], str(itip_event['organizer']), str(itip_reply))
+        smtp.quit()
+
+        # requester (john) now gets the ACCEPTED response
+        response = self.check_message_received(self.itip_reply_subject % { 'summary':'test', 'status':participant_status_label('ACCEPTED') }, self.room3['mail'])
+        self.assertIsInstance(response, email.message.Message)
+
+        event = self.check_resource_calendar_event(self.room3['kolabtargetfolder'], uid)
+        self.assertIsInstance(event, pykolab.xml.Event)
+        self.assertEqual(event.get_attendee_by_email(self.room3['mail']).get_participant_status(True), 'ACCEPTED')
+
+
+    def test_014_owner_confirmation_decline(self):
+        self.purge_mailbox(self.john['mailbox'])
+        self.purge_mailbox(self.jane['mailbox'])
+
+        uid = self.send_itip_invitation(self.room3['mail'], datetime.datetime(2014,9,14, 9,0,0))
+
+        # requester (john) gets a TENTATIVE confirmation
+        response = self.check_message_received(self.itip_reply_subject % { 'summary':'test', 'status':participant_status_label('TENTATIVE') }, self.room3['mail'])
+        self.assertIsInstance(response, email.message.Message)
+
+        # check confirmation message sent to resource owner (jane)
+        notify = self.check_message_received(_('Booking request for %s requires confirmation') % (self.room3['cn']), mailbox=self.jane['mailbox'])
+        self.assertIsInstance(notify, email.message.Message)
+
+        itip_event = events_from_message(notify)[0]
+
+        # resource owner declines reservation request
+        itip_reply = itip_event['xml'].to_message_itip(self.jane['mail'],
+            method="REPLY",
+            participant_status='DECLINED',
+            message_text="Request declined",
+            subject=_('Booking for %s has been %s') % (self.room3['cn'], participant_status_label('DECLINED'))
+        )
+
+        smtp = smtplib.SMTP('localhost', 10026)
+        smtp.sendmail(self.jane['mail'], str(itip_event['organizer']), str(itip_reply))
+        smtp.quit()
+
+        # requester (john) now gets the DECLINED response
+        response = self.check_message_received(self.itip_reply_subject % { 'summary':'test', 'status':participant_status_label('DECLINED') }, self.room3['mail'])
+        self.assertIsInstance(response, email.message.Message)
+
+        # tentative reservation was removed from resource calendar
+        event = self.check_resource_calendar_event(self.room3['kolabtargetfolder'], uid)
+        self.assertEqual(event, None)

pykolab-0.7.tar.gz/tests/functional/test_wallace/test_006_gpgencrypt.py Deleted

@@ -1,257 +0,0 @@
-import time
-import pykolab
-import smtplib
-import email
-import datetime
-import uuid
-
-from pykolab import wap_client
-from pykolab.auth import Auth
-from pykolab.imap import IMAP
-
-from email import message_from_string
-
-import tests.functional.resource_func as funcs
-
-conf = pykolab.getConf()
-
-class TestGPGEncrypt(unittest.TestCase):
-    @classmethod
-    def setUp(self):
-        """ Compatibility for twisted.trial.unittest
-        """
-        if not self.john:
-            self.setup_class()
-
-    @classmethod
-    def setup_class(self, *args, **kw):
-        from tests.functional.purge_users import purge_users
-        purge_users()
-
-        self.john = {
-            'displayname': 'John Doe',
-            'mail': 'john.doe@example.org',
-            'sender': 'John Doe <john.doe@example.org>',
-            'mailbox': 'user/john.doe@example.org'
-        }
-
-        from tests.functional.user_add import user_add
-        user_add("John", "Doe")
-
-        funcs.purge_resources()
-        self.audi = funcs.resource_add("car", "Audi A4")
-        self.passat = funcs.resource_add("car", "VW Passat")
-        self.boxter = funcs.resource_add("car", "Porsche Boxter S")
-        self.cars = funcs.resource_add("collection", "Company Cars", [ self.audi['dn'], self.passat['dn'], self.boxter['dn'] ])
-
-        time.sleep(1)
-        from tests.functional.synchronize import synchronize_once
-        synchronize_once()
-
-    def send_message(self, msg_source, to_addr, from_addr=None):
-        if from_addr is None:
-            from_addr = self.john['mail']
-
-        smtp = smtplib.SMTP('localhost', 10026)
-        smtp.sendmail(from_addr, to_addr, msg_source)
-
-    def send_itip_invitation(self, resource_email, start=None):
-        if start is None:
-            start = datetime.datetime.now()
-
-        uid = str(uuid.uuid4())
-        end = start + datetime.timedelta(hours=4)
-        self.send_message(itip_invitation % (
-                resource_email,
-                uid,
-                start.strftime('%Y%m%dT%H%M%S'),
-                end.strftime('%Y%m%dT%H%M%S'),
-                resource_email
-            ),
-            resource_email)
-
-        return uid
-
-    def send_itip_update(self, resource_email, uid, start=None):
-        if start is None:
-            start = datetime.datetime.now()
-
-        end = start + datetime.timedelta(hours=4)
-        self.send_message(itip_update % (
-                resource_email,
-                uid,
-                start.strftime('%Y%m%dT%H%M%S'),
-                end.strftime('%Y%m%dT%H%M%S'),
-                resource_email
-            ),
-            resource_email)
-
-        return uid
-
-    def send_itip_cancel(self, resource_email, uid):
-        self.send_message(itip_cancellation % (
-                resource_email,
-                uid,
-                resource_email
-            ),
-            resource_email)
-
-        return uid
-
-
-    def check_message_received(self, subject, from_addr=None):
-        imap = IMAP()
-        imap.connect()
-        imap.set_acl(self.john['mailbox'], "cyrus-admin", "lrs")
-        imap.imap.m.select(self.john['mailbox'])
-
-        found = None
-        retries = 10
-
-        while not found and retries > 0:
-            retries -= 1
-
-            typ, data = imap.imap.m.search(None, '(UNDELETED HEADER FROM "%s")' % (from_addr) if from_addr else 'UNDELETED')
-            for num in data[0].split():
-                typ, msg = imap.imap.m.fetch(num, '(RFC822)')
-                message = message_from_string(msg[0][1])
-                if message['Subject'] == subject:
-                    found = message
-                    break
-
-            time.sleep(1)
-
-        imap.disconnect()
-
-        return found
-
-    def check_resource_calendar_event(self, mailbox, uid=None):
-        imap = IMAP()
-        imap.connect()
-
-        imap.imap.m.select(u'"'+mailbox+'"')
-
-        found = None
-        retries = 10
-
-        while not found and retries > 0:
-            retries -= 1
-
-            typ, data = imap.imap.m.search(None, '(UNDELETED HEADER SUBJECT "%s")' % (uid) if uid else '(UNDELETED HEADER X-Kolab-Type "application/x-vnd.kolab.event")')
-            for num in data[0].split():
-                typ, data = imap.imap.m.fetch(num, '(RFC822)')
-                event_message = message_from_string(data[0][1])
-
-                # return matching UID or first event found
-                if uid and event_message['subject'] != uid:
-                    continue
-
-                for part in event_message.walk():
-                    if part.get_content_type() == "application/calendar+xml":
-                        payload = part.get_payload(decode=True)
-                        found = pykolab.xml.event_from_string(payload)
-                        break
-
-                if found:
-                    break
-
-            time.sleep(1)
-
-        return found
-
-    def purge_mailbox(self, mailbox):
-        imap = IMAP()
-        imap.connect()
-        imap.set_acl(mailbox, "cyrus-admin", "lrwcdest")
-        imap.imap.m.select(u'"'+mailbox+'"')
-
-        typ, data = imap.imap.m.search(None, 'ALL')
-        for num in data[0].split():
-            imap.imap.m.store(num, '+FLAGS', '\\Deleted')
-
-        imap.imap.m.expunge()
-        imap.disconnect()
-
-
-    def test_001_resource_from_email_address(self):
-        resource = module_resources.resource_record_from_email_address(self.audi['mail'])
-        self.assertEqual(len(resource), 1)
-        self.assertEqual(resource[0], self.audi['dn'])
-
-        collection = module_resources.resource_record_from_email_address(self.cars['mail'])
-        self.assertEqual(len(collection), 1)
-        self.assertEqual(collection[0], self.cars['dn'])
-
-
-    def test_002_invite_resource(self):
-        uid = self.send_itip_invitation(self.audi['mail'], datetime.datetime(2014,7,13, 10,0,0))
-
-        response = self.check_message_received("Reservation Request for test was ACCEPTED", self.audi['mail'])
-        self.assertIsInstance(response, email.message.Message)
-
-        event = self.check_resource_calendar_event(self.audi['kolabtargetfolder'], uid)
-        self.assertIsInstance(event, pykolab.xml.Event)
-        self.assertEqual(event.get_summary(), "test")
-
-
-    def test_003_invite_resource_conflict(self):
-        uid = self.send_itip_invitation(self.audi['mail'], datetime.datetime(2014,7,13, 12,0,0))
-
-        response = self.check_message_received("Reservation Request for test was DECLINED", self.audi['mail'])
-        self.assertIsInstance(response, email.message.Message)
-
-        self.assertEqual(self.check_resource_calendar_event(self.audi['kolabtargetfolder'], uid), None)
-
-
-    def test_004_invite_resource_collection(self):
-        self.purge_mailbox(self.john['mailbox'])
-
-        uid = self.send_itip_invitation(self.cars['mail'], datetime.datetime(2014,7,13, 12,0,0))
-
-        # one of the collection members accepted the reservation
-        accept = self.check_message_received("Reservation Request for test was ACCEPTED")
-        self.assertIsInstance(accept, email.message.Message)
-
-        delegatee = self.passat if accept['from'].find(self.passat['mail']) >= 0 else self.boxter
-        self.assertIn(delegatee['mail'], accept['from'])
-
-        # check booking in the delegatee's resource calendar
-        self.assertIsInstance(self.check_resource_calendar_event(delegatee['kolabtargetfolder'], uid), pykolab.xml.Event)
-
-        # resource collection responds with a DELEGATED message
-        response = self.check_message_received("Reservation Request for test was DELEGATED", self.cars['mail'])
-        self.assertIsInstance(response, email.message.Message)
-
-
-    def test_005_rescheduling_reservation(self):
-        uid = self.send_itip_invitation(self.audi['mail'], datetime.datetime(2014,5,1, 10,0,0))
-
-        response = self.check_message_received("Reservation Request for test was ACCEPTED", self.audi['mail'])
-        self.assertIsInstance(response, email.message.Message)
-
-        self.purge_mailbox(self.john['mailbox'])
-        self.send_itip_update(self.audi['mail'], uid, datetime.datetime(2014,5,1, 12,0,0)) # conflict with myself
-
-        response = self.check_message_received("Reservation Request for test was ACCEPTED", self.audi['mail'])
-        self.assertIsInstance(response, email.message.Message)
-
-        event = self.check_resource_calendar_event(self.audi['kolabtargetfolder'], uid)
-        self.assertIsInstance(event, pykolab.xml.Event)
-        self.assertEqual(event.get_start().hour, 12)
-        self.assertEqual(event.get_sequence(), 2)
-
-
-    def test_006_cancelling_revervation(self):
-        uid = self.send_itip_invitation(self.boxter['mail'], datetime.datetime(2014,5,1, 10,0,0))
-        self.assertIsInstance(self.check_resource_calendar_event(self.boxter['kolabtargetfolder'], uid), pykolab.xml.Event)
-
-        self.send_itip_cancel(self.boxter['mail'], uid)
-
-        time.sleep(2)  # wait for IMAP to update
-        self.assertEqual(self.check_resource_calendar_event(self.boxter['kolabtargetfolder'], uid), None)
-
-        # make new reservation to the now free'd slot
-        self.send_itip_invitation(self.boxter['mail'], datetime.datetime(2014,5,1, 9,0,0))
-
-        response = self.check_message_received("Reservation Request for test was ACCEPTED", self.boxter['mail'])
-        self.assertIsInstance(response, email.message.Message)

pykolab-0.7.tar.gz/tests/unit/test-003-event.py Changed

pykolab-0.7.tar.gz/tests/unit/test-011-base64_encoded_contact.py Deleted

@@ -1,77 +0,0 @@
-from email import message_from_string
-from email.MIMEMultipart import MIMEMultipart
-from email.MIMEBase import MIMEBase
-from email.MIMEImage import MIMEImage
-from email.MIMEText import MIMEText
-from email.Utils import COMMASPACE, formatdate
-from email import Encoders
-import sys
-import unittest
-
-class TestContactBase64EncodedXML(unittest.TestCase):
-    def assertIsInstance(self, _value, _type):
-        if hasattr(unittest.TestCase, 'assertIsInstance'):
-            return unittest.TestCase.assertIsInstance(self, _value, _type)
-        else:
-            if (type(_value)) == _type:
-                return True
-            else:
-                raise AssertionError, "%s != %s" % (type(_value), _type)
-
-    def test_001_base64_encoded_xml(self):
-        msg = """From: vanmeeuwen@demo.kolab.org
-Reply-To:
-Bcc:
-To: synckolab@no.tld
-Subject: sk-vc-3AC0C113BFADC313
-Date: Sun, 17 Feb 2013 10:21:40 -0500
-Content-Type: Multipart/Mixed;boundary="Boundary-00=363B189F14E3799C"
-User-Agent: SyncKolab 3.0.0
-X-Kolab-Type: application/vcard+xml
-
---Boundary-00=363B189F14E3799C
-Content-Type: Text/Plain;
- charset="us-ascii"
-Content-Transfer-Encoding: 7bit
-
-This is a Kolab Groupware object.
-To view this object you will need an email client that can understand the Kolab Groupware format.
-For a list of such email clients please visit
-http://kolab.org/content/kolab-clients
----
-Name: van Meeuwen Jeroen
-E-Mail:kanarip@kanarip.com
----
-
-Notice:
-The information above is only valid, if no other client than synckolab updated this message. (ie. a client that updates the attachment but not the message)
-
---Boundary-00=363B189F14E3799C
-Content-Type: application/vcard+xml;
- name="kolab.xml"
-Content-Transfer-Encoding: base64
-Content-Disposition: attachment;
- filename="kolab.xml"
-
-PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiIHN0YW5kYWxvbmU9Im5vIiA/
-Pgo8dmNhcmRzIHhtbG5zPSJ1cm46aWV0ZjpwYXJhbXM6eG1sOm5zOnZjYXJkLTQuMCI+Cjx2
-Y2FyZD4KIDx1aWQ+PHRleHQ+c2stdmMtM0FDMEMxMTNCRkFEQzMxMzwvdGV4dD48L3VpZD4K
-IDx4LWtvbGFiLXZlcnNpb24+PHRleHQ+My4wZGV2MTwvdGV4dD48L3gta29sYWItdmVyc2lv
-bj4KIDxwcm9kaWQ+PHRleHQ+U3luY0tvbGFiIDMuMC4wLCBLb2xhYiByZXNvdXJjZTwvdGV4
-dD48L3Byb2RpZD4KIDxyZXY+PHRpbWVzdGFtcD4xOTY5MTIzMVQwMDAwMDBaWjwvdGltZXN0
-YW1wPjwvcmV2PgogPGtpbmQ+PHRleHQ+aW5kaXZpZHVhbDwvdGV4dD48L2tpbmQ+CiAgPGZu
-Pjx0ZXh0Pkplcm9lbiB2YW4gTWVldXdlbjwvdGV4dD48L2ZuPgogPG4+CiAgIDxzdXJuYW1l
-PnZhbiBNZWV1d2VuPC9zdXJuYW1lPgogICA8Z2l2ZW4+SmVyb2VuPC9naXZlbj4KIDwvbj4K
-IDxuaWNrbmFtZT4KICAgIDx0ZXh0PmthbmFyaXA8L3RleHQ+CiA8L25pY2tuYW1lPgogPGVt
-YWlsPgogIDxwYXJhbWV0ZXJzPjxwcmVmPjxpbnRlZ2VyPjE8L2ludGVnZXI+PC9wcmVmPjwv
-cGFyYW1ldGVycz4KICA8dGV4dD5rYW5hcmlwQGthbmFyaXAuY29tPC90ZXh0PgogPC9lbWFp
-bD4KPHgtY3VzdG9tPjxpZGVudGlmaWVyPlgtUHJlZmVyTWFpbEZvcm1hdDwvaWRlbnRpZmll
-cj48dmFsdWU+dW5rbm93bjwvdmFsdWU+PC94LWN1c3RvbT4KIDx4LWN1c3RvbT48aWRlbnRp
-Zmllcj5YLUFsbG93UmVtb3RlQ29udGVudDwvaWRlbnRpZmllcj48dmFsdWU+ZmFsc2U8L3Zh
-bHVlPjwveC1jdXN0b20+CjwvdmNhcmQ+CjwvdmNhcmRzPgo=
---Boundary-00=363B189F14E3799C--
-"""
-        message = message_from_string(msg)
-
-if __name__ == '__main__':
-    unittest.main()

pykolab-0.7.tar.gz/tests/unit/test-012-utf7.py Deleted

pykolab-0.7.tar.gz/tests/unit/test-013-bitmask.py Deleted

pykolab-0.7.tar.gz/tests/unit/test-015-platform.py Deleted

pykolab-0.7.tar.gz/ucs/kolab_sieve.py Added

@@ -0,0 +1,159 @@
+#!/usr/bin/python
+#
+# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
+#
+# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# workaround for PEP 366
+__package__ = ''
+
+import listener
+import logging
+import os
+import sys
+import univention_baseconfig
+import univention.debug as ulog
+
+sys.path = [
+        os.path.abspath(
+                os.path.join(
+                        os.path.dirname(
+                                os.path.realpath(os.path.abspath(__file__))
+                            ),
+                        '..'
+                    )
+            ) ] + sys.path
+
+sys.stderr = open('/dev/null', 'a')
+
+name = 'kolab_sieve'
+description = "Sieve Script Management for Kolab Groupware on UCS"
+
+# The filter has to be composed to make sure only Kolab Groupware
+# related objects are passed along to this listener module.
+filter = '(objectClass=kolabInetOrgPerson)'
+#attributes = [ '*' ]
+
+import pykolab
+from pykolab import constants
+from pykolab import utils
+
+log = pykolab.getLogger('pykolab.listener')
+log.remove_stdout_handler()
+log.setLevel(logging.DEBUG)
+log.debuglevel = 9
+
+conf = pykolab.getConf()
+conf.finalize_conf(fatal=False)
+conf.debuglevel = 9
+
+from pykolab.auth import Auth
+
+def handler(*args, **kw):
+    auth = Auth()
+    auth.connect()
+
+    if len(args) == 4:
+        # moddn, not relevant for Sieve Script Management
+        pass
+
+    elif len(args) == 3:
+        dn = args[0]
+        new = utils.normalize(args[1])
+        old = utils.normalize(args[2])
+
+        if isinstance(old, dict) and len(old.keys()) > 0:
+            # Either the entry changed or was deleted
+
+            if isinstance(new, dict) and len(new.keys()) > 0:
+                # The entry was modified.
+
+                result_attr = conf.get('cyrus-sasl', 'result_attribute')
+
+                if not new.has_key(result_attr):
+                    log.error(
+                            "Entry %r does not have attribute %r" % (
+                                    dn,
+                                    result_attr
+                                )
+                        )
+
+                    return
+
+                # See if the mailserver_attribute exists
+                mailserver_attribute = conf.get('ldap', 'mailserver_attribute').lower()
+
+                if mailserver_attribute == None:
+                    log.error("Mail server attribute is not set")
+                    # TODO: Perhaps, query for IMAP servers. If there is only one,
+                    #       we know what to do.
+                    return
+
+                if new.has_key(mailserver_attribute):
+                    if not new[mailserver_attribute] == constants.fqdn:
+                        log.info(
+                                "The mail server for user %r is set, and it is not me (%r)" % (
+                                        dn,
+                                        new[mailserver_attribute]
+                                    )
+                            )
+
+                        return
+                else:
+                    log.error("Entry %r does not have a mail server set" % (dn))
+                    return
+
+                conf.plugins.exec_hook(
+                        'sieve_mgmt_refresh',
+                        kw = {
+                                'user': new[result_attr]
+                            }
+                    )
+
+            else:
+                # The entry was deleted. This is irrelevant for
+                # Sieve Script Management
+                return
+
+        elif isinstance(new, dict) and len(new.keys()) > 0:
+            # Old is not a dict (or empty), so the entry is just created
+
+            # See if the mailserver_attribute exists
+            mailserver_attribute = conf.get('ldap', 'mailserver_attribute').lower()
+            result_attr = conf.get('cyrus-sasl', 'result_attribute').lower()
+
+            if mailserver_attribute == None:
+                log.error("Mail server attribute is not set")
+                # TODO: Perhaps, query for IMAP servers. If there is only one,
+                #       we know what to do.
+                return
+
+            if new.has_key(mailserver_attribute):
+                if not new[mailserver_attribute] == constants.fqdn:
+                    log.info("The mail server for user %r is set, and it is not me (%r)" % (dn, new[mailserver_attribute]))
+                    return
+
+                conf.plugins.exec_hook(
+                        'sieve_mgmt_refresh',
+                        kw = {
+                                'user': new[result_attr]
+                            }
+                    )
+
+        else:
+            log.info("entry %r changed, but no new or old attributes" % (dn))
+

pykolab-0.7.tar.gz/wallace/Makefile.in Deleted

@@ -1,525 +0,0 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = wallace
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(wallace_PYTHON) $(top_srcdir)/py-compile
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__py_compile = PYTHON=$(PYTHON) $(SHELL) $(py_compile)
-am__installdirs = "$(DESTDIR)$(wallacedir)"
-am__pep3147_tweak = \
-  sed -e 's|\.py$$||' -e 's|[^/]*$$|__pycache__/&.*.py|'
-py_compile = $(top_srcdir)/py-compile
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALL_LINGUAS = @ALL_LINGUAS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DATESTAMP = @DATESTAMP@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GMOFILES = @GMOFILES@
-GMSGFMT = @GMSGFMT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLLIBS = @INTLLIBS@
-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
-INTLTOOL_MERGE = @INTLTOOL_MERGE@
-INTLTOOL_PERL = @INTLTOOL_PERL@
-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
-INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
-INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
-INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
-INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGFMT_OPTS = @MSGFMT_OPTS@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POFILES = @POFILES@
-POSUB = @POSUB@
-PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
-PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
-PYTHON = @PYTHON@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RELEASE = @RELEASE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-intltool__v_merge_options_ = @intltool__v_merge_options_@
-intltool__v_merge_options_0 = @intltool__v_merge_options_0@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTRA_DIST = \
-	wallace.sysconfig \
-	wallace.systemd \
-	wallace.sysvinit \
-	wallace.tmpfiles.d.conf
-
-wallacedir = $(pythondir)/wallace
-wallace_PYTHON = \
-	__init__.py \
-	modules.py \
-	$(wildcard module_*.py)
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu wallace/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu wallace/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-wallacePYTHON: $(wallace_PYTHON)
-	@$(NORMAL_INSTALL)
-	@list='$(wallace_PYTHON)'; dlist=; list2=; test -n "$(wallacedir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(wallacedir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(wallacedir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
-	  if test -f $$b$$p; then \
-	    $(am__strip_dir) \
-	    dlist="$$dlist $$f"; \
-	    list2="$$list2 $$b$$p"; \
-	  else :; fi; \
-	done; \
-	for file in $$list2; do echo $$file; done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(wallacedir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(wallacedir)" || exit $$?; \
-	done || exit $$?; \
-	if test -n "$$dlist"; then \
-	  $(am__py_compile) --destdir "$(DESTDIR)" \
-	                    --basedir "$(wallacedir)" $$dlist; \
-	else :; fi
-
-uninstall-wallacePYTHON:
-	@$(NORMAL_UNINSTALL)
-	@list='$(wallace_PYTHON)'; test -n "$(wallacedir)" || list=; \
-	py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$py_files" || exit 0; \
-	dir='$(DESTDIR)$(wallacedir)'; \
-	pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \
-	pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \
-	py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \
-	echo "$$py_files_pep3147";\
-	pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \
-	pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \
-	st=0; \
-	for files in \
-	  "$$py_files" \
-	  "$$pyc_files" \
-	  "$$pyo_files" \
-	  "$$pyc_files_pep3147" \
-	  "$$pyo_files_pep3147" \
-	; do \
-	  $(am__uninstall_files_from_dir) || st=$$?; \
-	done; \
-	exit $$st
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-	for dir in "$(DESTDIR)$(wallacedir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-wallacePYTHON
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-exec-local
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-wallacePYTHON
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
-	ctags-am distclean distclean-generic distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-exec-local install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip install-wallacePYTHON installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags-am uninstall uninstall-am \
-	uninstall-wallacePYTHON
-
-
-install-exec-local:
-	mkdir -p $(DESTDIR)/$(sbindir) \
-		$(DESTDIR)/$(localstatedir)/run/wallaced
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

pykolab-0.7.tar.gz/wallace/module_invitationpolicy.py Changed

pykolab-0.7.tar.gz/wallace/module_resources.py Changed

@@ -26,6 +26,8 @@
 import time
 from urlparse import urlparse
 import urllib
+import uuid
+import re
 
 from email import message_from_string
 from email.parser import Parser
@@ -159,15 +161,17 @@
     message = Parser().parse(open(filepath, 'r'))
 
     recipients = [address for displayname,address in getaddresses(message.get_all('X-Kolab-To'))]
+    sender_email = [address for displayname,address in getaddresses(message.get_all('X-Kolab-From'))][0]
 
     any_itips = False
     any_resources = False
     possibly_any_resources = True
+    reference_uid = None
 
     # An iTip message may contain multiple events. Later on, test if the message
     # is an iTip message by checking the length of this list.
     try:
-        itip_events = events_from_message(message, ['REQUEST', 'CANCEL'])
+        itip_events = events_from_message(message, ['REQUEST', 'REPLY', 'CANCEL'])
     except Exception, e:
         log.error(_("Failed to parse iTip events from message: %r" % (e)))
         itip_events = []
@@ -199,6 +203,12 @@
         auth.connect()
 
         for recipient in recipients:
+            # extract reference UID from recipients like resource+UID@domain.org
+            if re.match('.+\+[A-Za-z0-9%/_-]+@', recipient):
+                (prefix, host) = recipient.split('@')
+                (local, reference_uid) = prefix.split('+')
+                recipient = local + '@' + host
+
             if not len(resource_record_from_email_address(recipient)) == 0:
                 resource_recipient = recipient
                 any_resources = True
@@ -226,6 +236,7 @@
     # check if resource attendees match the envelope recipient
     if len(resource_dns) == 0:
         log.info(_("No resource attendees matching envelope recipient %s, Reject message") % (resource_recipient))
+        log.debug("%r" % (itip_events), level=8)
         reject(filepath)
         return False
 
@@ -242,6 +253,41 @@
     receiving_resource = resources[resource_dns[0]]
 
     for itip_event in itip_events:
+        if itip_event['method'] == 'REPLY':
+            done = True
+
+            # find initial reservation referenced by the reply
+            if reference_uid:
+                event = find_existing_event(reference_uid, receiving_resource)
+                if event:
+                    try:
+                        sender_attendee = itip_event['xml'].get_attendee_by_email(sender_email)
+                        owner_reply = sender_attendee.get_participant_status()
+                        log.debug(_("Sender Attendee: %r => %r") % (sender_attendee, owner_reply), level=9)
+                    except Exception, e:
+                        log.error("Could not find envelope sender attendee: %r" % (e))
+                        continue
+
+                    itip_event_ = dict(xml=event, uid=event.get_uid())
+
+                    if owner_reply == kolabformat.PartAccepted:
+                        accept_reservation_request(itip_event_, receiving_resource, confirmed=True)
+                    elif owner_reply == kolabformat.PartDeclined:
+                        decline_reservation_request(itip_event_, receiving_resource)
+                        # TODO: set partstat=DECLINED and status=CANCELLED instead of deleting?
+                        delete_resource_event(reference_uid, receiving_resource)
+                    else:
+                        log.info("Invalid response (%r) recieved from resource owner for event %r" % (
+                            sender_attendee.get_participant_status(True), reference_uid
+                        ))
+                else:
+                    log.info(_("Event referenced by this REPLY (%r) not found in resource calendar") % (reference_uid))
+
+            # exit for-loop
+            break
+
+        # else:
+
         try:
             receiving_attendee = itip_event['xml'].get_attendee_by_email(receiving_resource['mail'])
             log.debug(_("Receiving Resource: %r; %r") % (receiving_resource, receiving_attendee), level=9)
@@ -510,18 +556,65 @@
     return num_messages
 
 
-def accept_reservation_request(itip_event, resource, delegator=None):
+def find_existing_event(uid, resource_rec):
+    """
+        Search the resources's calendar folder for the given event (by UID)
+    """
+    global imap
+
+    event = None
+    mailbox = resource_rec['kolabtargetfolder']
+
+    log.debug(_("Searching %r for event %r") % (mailbox, uid), level=9)
+
+    try:
+        imap.imap.m.select(imap.folder_quote(mailbox))
+        typ, data = imap.imap.m.search(None, '(UNDELETED HEADER SUBJECT "%s")' % (uid))
+    except Exception, e:
+        log.error(_("Failed to access resource calendar:: %r") % (e))
+        return event
+
+    for num in reversed(data[0].split()):
+        typ, data = imap.imap.m.fetch(num, '(RFC822)')
+
+        try:
+            event = event_from_message(message_from_string(data[0][1]))
+        except Exception, e:
+            log.error(_("Failed to parse event from message %s/%s: %r") % (mailbox, num, e))
+            continue
+
+        if event and event.uid == uid:
+            return event
+
+    return event
+
+
+def accept_reservation_request(itip_event, resource, delegator=None, confirmed=False):
     """
         Accepts the given iTip event by booking it into the resource's
         calendar. Then set the attendee status of the given resource to
         ACCEPTED and sends an iTip reply message to the organizer.
     """
+    owner = get_resource_owner(resource)
+    confirmation_required = False
+
+    if not confirmed and resource.has_key('kolabinvitationpolicy'):
+        for policy in resource['kolabinvitationpolicy']:
+            if policy & ACT_MANUAL and owner['mail']:
+                confirmation_required = True
+                break
+
+    partstat = 'TENTATIVE' if confirmation_required else 'ACCEPTED'
 
     itip_event['xml'].set_attendee_participant_status(
         itip_event['xml'].get_attendee_by_email(resource['mail']),
-        "ACCEPTED"
+        partstat
     )
 
+    # remove old copy of the reservation
+    if confirmed:
+        delete_resource_event(itip_event['uid'], resource)
+
     saved = save_resource_event(itip_event, resource)
 
     log.debug(
@@ -529,12 +622,12 @@
         level=8
     )
 
-    owner = get_resource_owner(resource)
-
     if saved:
         send_response(delegator['mail'] if delegator else resource['mail'], itip_event, owner)
 
-    if owner:
+    if owner and confirmation_required:
+        send_owner_confirmation(resource, owner, itip_event)
+    elif owner:
         send_owner_notification(resource, owner, itip_event, saved)
 
 
@@ -685,6 +778,12 @@
 
     log.debug(_("Raw set of resources: %r") % (resources_raw), level=9)
 
+    # consider organizer (in REPLY messages), too
+    organizers_raw = [re.sub('\+[A-Za-z0-9%/_-]+@', '@', str(y['organizer'])) for y in itip_events if y.has_key('organizer')]
+
+    log.debug(_("Raw set of organizers: %r") % (organizers_raw), level=8)
+
+
     # TODO: We expect the format of an attendee line to literally be:
     #
     #   ATTENDEE:RSVP=TRUE;ROLE=REQ-PARTICIPANT;MAILTO:lydia.bossers@kolabsys.com
@@ -693,7 +792,7 @@
     #
     #   RSVP=TRUE;ROLE=REQ-PARTICIPANT;MAILTO:lydia.bossers@kolabsys.com
     #
-    attendees = [x.split(':')[-1] for x in attendees_raw]
+    attendees = [x.split(':')[-1] for x in attendees_raw + organizers_raw]
 
     # Limit the attendee resources to the one that is actually invited
     # with the current message. Considering all invited resources would result in
@@ -1000,3 +1099,59 @@
         'orgname': organizer.name(),
         'orgemail': organizer.email()
     }
+
+
+def send_owner_confirmation(resource, owner, itip_event):
+    """
+        Send a reservation request to the resource owner for manual confirmation (ACCEPT or DECLINE)
+
+        This clones the given invtation with a new UID and setting the resource as organizer in order to
+        receive the reply from the owner.
+    """
+
+    event = itip_event['xml']
+    uid = itip_event['uid']
+    organizer = event.get_organizer()
+
+    # generate new UID and set the resource as organizer
+    (mail, domain) = resource['mail'].split('@')
+    event.set_uid(str(uuid.uuid4()))
+    event.set_organizer(mail + '+' + urllib.quote(uid) + '@' + domain, resource['cn'])
+    itip_event['uid'] = event.get_uid()
+
+    # add resource owner as attendee
+    event.add_attendee(owner['mail'], owner['cn'], rsvp=True, role=kolabformat.Required, participant_status=kolabformat.PartNeedsAction)
+
+    # flag this iTip message as confirmation type
+    event.add_custom_property('X-Wallace-MessageType', 'CONFIRMATION')
+
+    log.debug(
+        _("Clone invitation for owner confirmation: %r from %r") % (
+            itip_event['uid'], event.get_organizer().email()
+        ),
+        level=8
+    )
+
+    message_text = _("""
+        A reservation request for %(resource)s requires your approval!
+        Please either accept or decline this inivitation without saving it to your calendar.
+
+        The reservation request was sent from %(orgname)s <%(orgemail)s>.
+
+        Subject: %(summary)s.
+        Date: %(date)s
+
+        *** This is an automated message, please don't reply by email. ***
+    """)% {
+        'resource': resource['cn'],
+        'orgname': organizer.name(),
+        'orgemail': organizer.email(),
+        'summary': event.get_summary(),
+        'date': event.get_date_text()
+    }
+
+    pykolab.itip.send_request(owner['mail'], itip_event, message_text,
+        subject=_('Booking request for %s requires confirmation') % (resource['cn']),
+        direct=True)
+
+