Kolab Groupware OBS

We truncated the diff of some files because they were too big. If you want to see the full diff for every file, click here.

Changes of Revision 102

pykolab.spec Changed

enable-kolabd.patch Deleted

enable-wallace.patch Deleted

debian.changelog Changed

debian.series Changed

pykolab-0.7.0.tar.gz/.gitignore Deleted

pykolab-0.7.0.tar.gz/.tx Deleted

pykolab-0.7.0.tar.gz/.tx/config Deleted

pykolab-0.7.0.tar.gz/bin/gen-ldif Deleted

@@ -1,44 +0,0 @@
-#!/bin/bash
-
-[ ! -z "$2" ] && domain=$2 || domain="example.org"
-[ ! -z "$3" ] && rootdn=$3 || rootdn="dc=example,dc=org"
-[ ! -z "$4" ] && ou=$4 || ou="ou=People"
-
-echo "dn: ${ou},${rootdn}"
-echo "objectClass: top"
-echo "objectClass: organizationalunit"
-echo "$(echo ${ou} | cut -d'=' -f 1): $(echo ${ou} | cut -d'=' -f 2)"
-echo 'aci: (targetattr ="userpassword || telephonenumber || facsimiletelephonenumber")(version 3.0; acl "Allow self entry modification"; allow (write)(userdn = "ldap:///self");)'
-echo ""
-
-i=0
-while [ $i -lt 0$1 ]; do
-
-    givenname=`head -c 200 /dev/urandom | tr -dc A-Za-z | head -c5`
-    surname=`head -c 200 /dev/urandom | tr -dc A-Za-z | head -c10`
-
-    givenname="$(echo ${givenname:0:1} | tr '[:lower:]' '[:upper:]')$(echo ${givenname:1} | tr '[:upper:]' '[:lower:]')"
-    givenname_lower="$(echo ${givenname} | tr '[:upper:]' '[:lower:]')"
-    surname="$(echo ${surname:0:1} | tr '[:lower:]' '[:upper:]')$(echo ${surname:1} | tr '[:upper:]' '[:lower:]')"
-    surname_lower="$(echo ${surname} | tr '[:upper:]' '[:lower:]')"
-
-    uid="$(echo ${givenname:0:1}.${surname} | tr '[:upper:]' '[:lower:]')"
-
-    userpassword="VerySecret"
-
-    echo "dn: uid=$uid,${ou},${rootdn}"
-    echo "uid: $uid"
-    echo "givenName: $givenname"
-    echo "objectClass: top"
-    echo "objectClass: person"
-    echo "objectClass: inetOrgPerson"
-    echo "objectClass: organizationalPerson"
-    echo "objectClass: mailrecipient"
-    echo "sn: $surname"
-    echo "cn: $givenname $surname"
-    echo "mail: ${givenname_lower}.${surname_lower}@${domain}"
-    echo "userPassword: {SSHA}zJ3oU5kqtS3MxnLWmKpnE7+eGVbmQKmj"
-    echo ""
-
-    let i++
-done

pykolab-0.7.0.tar.gz/bin/pykolab-update-lang Deleted

pykolab-0.7.0.tar.gz/conf/kolab-test-example.conf Deleted

@@ -1,32 +0,0 @@
-[postfix]
-leave_this_one_to_me = why_dont_cha
-
-[mysql]
-db_uri = mysql://username:password@hostname/database
-
-[kolab]
-imap_backend = cyrus-imapd
-auth_mechanism = ldap
-mta = postfix
-archving = openbenno
-
-[ldap]
-user_base_dn = ou=People,%(base_dn)s
-base_dn = dc=localdomain
-uri = ldap://localhost
-bind_dn = cn=Directory Manager
-group_base_dn = ou=Groups,%(base_dn)s
-bind_pw = verysecret
-
-[testing]
-admin_password = alsoverysecret
-admin_login = manager
-server = 127.0.0.1
-users = [
-        { 'givenname': 'john',  'sn': 'doe',    'domain': 'doe.org',    'password': 'Welcome2KolabSystems' },
-        { 'givenname': 'joe',   'sn': 'doe',    'domain': 'doe.org',    'password': 'Welcome2KolabSystems' },
-        { 'givenname': 'max',   'sn': 'doe',    'domain': 'doe.org',    'password': 'Welcome2KolabSystems' },
-        { 'givenname': 'min',   'sn': 'doe',    'domain': 'doe.org',    'password': 'Welcome2KolabSystems' },
-        { 'givenname': 'joe',   'sn': 'sixpack','domain': 'sixpack.com','password': 'Welcome2KolabSystems' },
-        { 'givenname': 'max',   'sn': 'imum',   'domain': 'imum.net',   'password': 'Welcome2KolabSystems' },
-    ]

pykolab-0.7.0.tar.gz/doc Deleted

pykolab-0.7.0.tar.gz/doc/kolab.1 Deleted

@@ -1,502 +0,0 @@
-.TH kolab 1 "November 4, 2012" "pykolab 0.6" "USER COMMANDS"
-
-.SH NAME
-kolab \- command-line utility to interact with Kolab Groupware and Cyrus IMAP
-
-.\"
-.\"
-.\" SYNOPSIS Section
-.\"
-.\"
-.SH SYNOPSIS
-.BI "kolab [-c " "config-file" "] [-d " "debug-level" "] [-l " "log-level" "] [--logfile " "log-file" "] "
-.RB "[group] " "command " "[options] [parameters]"
-
-.\"
-.\"
-.\" DESCRIPTION Section
-.\"
-.\"
-.SH DESCRIPTION
-Kolab Groupware command-line utilities that make rain go away.
-.PP
-The
-.BR kolab (1)
-utilities are of an administrative nature, meaning that actions will be executed with the highest level of privileges available. For example, listing the mailboxes a user is subscribed to logs on to IMAP as the Cyrus IMAP administrator (configured in the [cyrus-imap] section of
-.BR kolab.conf (5)),
-and authorize itself as the user before issuing the LSUB command.
-
-.\"
-.\"
-.\" OPTIONS Section
-.\"
-.\"
-.SH OPTIONS
-
-.TP
-.BI "-c " "config-file"
-
-Use
-.I config-file
-instead of the system-wide configuration file
-.IR /etc/kolab/kolab.conf .
-
-.TP
-.BI "-d " "debug-level"
-
-Set the debug level to
-.IR debug-level .
-The default is 0.
-.HP
-.RS
-Trace
-.BR kolab (1)
-itself with debug level 8.
-The maximum debug level of 9 will cause
-.BR kolab (1)
-to perform protocol tracing (on IMAP, HTTP, LDAP, SMTP, LMTP, MANAGESIEVE and other protocols it uses).
-.RE
-
-.TP
-.BI "-h, --help"
-
-Display a short help on usage, including commands and a brief description for each.
-
-.TP
-.BI "-l, --loglevel " "log-level"
-
-Set the
-.BR kolab (1)
-log level to
-.I log-level
-Valid log-levels include DEBUG, INFO, WARN, ERR, CRIT, EMERG.
-.HP
-.RS
-.BR NOTE :
-Setting the debug level to non-zero implies setting a log level of DEBUG.
-.RE
-
-.TP
-.BI "-q, --quiet"
-
-Be quiet \- suppresses output like headers for columns
-
-.TP
-.BI "-y, --yes"
-
-Answer yes to all questions (that ask for confirmation).
-
-.\"
-.\"
-.\" FILES Section
-.\"
-.\"
-.SH FILES
-.I /etc/kolab/kolab.conf
-
-.RS
-The system wide configuration file for Kolab Groupware. See
-.BR kolab.conf (5)
-for further details.
-.RE
-
-.\"
-.\"
-.\" ENVIRONMENT Section
-.\"
-.\"
-.SH ENVIRONMENT
-No environment variables impact the operations of
-.BR kolab (1).
-
-.\"
-.\"
-.\" COMMANDS Section
-.\"
-.\"
-.SH COMMANDS
-
-.TP
-.BI "acl-cleanup " "aci-subject"
-
-Clean up ACLs on mailboxes and mailfolders that refer to the ACI subject
-.I aci-subject
-in any of the ACEs.
-
-.\" .TP
-.\" .BI "add-domain "
-.\" Add a domain name space
-.\"
-.\" .TP
-.\" .BI "add-group "
-.\" Add a group
-.\"
-.\" .TP
-.\" .BI "add-user "
-.\" Add a user
-.\"
-.TP
-.BI "add-user-subscription " "user pattern"
-
-Subscribe
-.I user
-to the mailboxes matching
-.IR pattern .
-See PATTERNS for more information on pattern matching.
-
-.TP
-.BI "cm, create-mailbox [" "--metadata=path,value" "] " mailbox
-
-Create a mailbox
-.I mailbox
-[with metadata
-.I path
-set to
-.IR value ].
-.PP
-.RS
-Valid metadata paths depend on the deployment. Metadata paths are prefixed by a METADATA namespace. See EXAMPLES for usage examples.
-.RE
-
-.TP
-.BI "dam, delete-mailbox-acl " "pattern aci-subject"
-
-Delete ACEs for
-.I aci-subject
-from mailboxes matching
-.IR pattern .
-See PATTERNS for more information on pattern matching.
-
-.\" .TP
-.\" .BI "delete-domain"
-.\" Delete a domain
-.\"
-.\" .TP
-.\" .BI "delete-group"
-.\" Delete a group
-.\"
-.TP
-.BI "dm, delete-mailbox " "pattern"
-
-Delete mailboxes matching
-.IR pattern .
-See PATTERNS for more information on pattern matching.
-
-.\" .TP
-.\" .BI "delete-user"
-.\" Delete a user
-.\"
-.\" .TP
-.\" .BI "export-mailbox"
-.\" Export a mailbox.
-.\"
-.TP
-.BI help
-
-Show a list of commands implemented with
-.BR kolab (1).
-
-.TP

pykolab-0.7.0.tar.gz/ext Deleted

pykolab-0.7.0.tar.gz/ext/python Deleted

pykolab-0.7.0.tar.gz/ext/python/Tools Deleted

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze Deleted

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze/README Deleted

@@ -1,296 +0,0 @@
-THE FREEZE SCRIPT
-=================
-
-(Directions for Windows are at the end of this file.)
-
-
-What is Freeze?
----------------
-
-Freeze make it possible to ship arbitrary Python programs to people
-who don't have Python.  The shipped file (called a "frozen" version of
-your Python program) is an executable, so this only works if your
-platform is compatible with that on the receiving end (this is usually
-a matter of having the same major operating system revision and CPU
-type).
-
-The shipped file contains a Python interpreter and large portions of
-the Python run-time.  Some measures have been taken to avoid linking
-unneeded modules, but the resulting binary is usually not small.
-
-The Python source code of your program (and of the library modules
-written in Python that it uses) is not included in the binary --
-instead, the compiled byte-code (the instruction stream used
-internally by the interpreter) is incorporated.  This gives some
-protection of your Python source code, though not much -- a
-disassembler for Python byte-code is available in the standard Python
-library.  At least someone running "strings" on your binary won't see
-the source.
-
-
-How does Freeze know which modules to include?
-----------------------------------------------
-
-Previous versions of Freeze used a pretty simple-minded algorithm to
-find the modules that your program uses, essentially searching for
-lines starting with the word "import".  It was pretty easy to trick it
-into making mistakes, either missing valid import statements, or
-mistaking string literals (e.g. doc strings) for import statements.
-
-This has been remedied: Freeze now uses the regular Python parser to
-parse the program (and all its modules) and scans the generated byte
-code for IMPORT instructions.  It may still be confused -- it will not
-know about calls to the __import__ built-in function, or about import
-statements constructed on the fly and executed using the 'exec'
-statement, and it will consider import statements even when they are
-unreachable (e.g. "if 0: import foobar").
-
-This new version of Freeze also knows about Python's new package
-import mechanism, and uses exactly the same rules to find imported
-modules and packages.  One exception: if you write 'from package
-import *', Python will look into the __all__ variable of the package
-to determine which modules are to be imported, while Freeze will do a
-directory listing.
-
-One tricky issue: Freeze assumes that the Python interpreter and
-environment you're using to run Freeze is the same one that would be
-used to run your program, which should also be the same whose sources
-and installed files you will learn about in the next section.  In
-particular, your PYTHONPATH setting should be the same as for running
-your program locally.  (Tip: if the program doesn't run when you type
-"python hello.py" there's little chance of getting the frozen version
-to run.)
-
-
-How do I use Freeze?
---------------------
-
-Normally, you should be able to use it as follows:
-
-	python freeze.py hello.py
-
-where hello.py is your program and freeze.py is the main file of
-Freeze (in actuality, you'll probably specify an absolute pathname
-such as /usr/joe/python/Tools/freeze/freeze.py).
-
-
-What do I do next?
-------------------
-
-Freeze creates a number of files: frozen.c, config.c and Makefile,
-plus one file for each Python module that gets included named
-M_<module>.c.  To produce the frozen version of your program, you can
-simply type "make".  This should produce a binary file.  If the
-filename argument to Freeze was "hello.py", the binary will be called
-"hello".
-
-Note: you can use the -o option to freeze to specify an alternative
-directory where these files are created. This makes it easier to
-clean up after you've shipped the frozen binary.  You should invoke
-"make" in the given directory.
-
-
-Freezing Tkinter programs
--------------------------
-
-Unfortunately, it is currently not possible to freeze programs that
-use Tkinter without a Tcl/Tk installation. The best way to ship a
-frozen Tkinter program is to decide in advance where you are going
-to place the Tcl and Tk library files in the distributed setup, and
-then declare these directories in your frozen Python program using
-the TCL_LIBRARY, TK_LIBRARY and TIX_LIBRARY environment variables.
-
-For example, assume you will ship your frozen program in the directory 
-<root>/bin/windows-x86 and will place your Tcl library files 
-in <root>/lib/tcl8.2 and your Tk library files in <root>/lib/tk8.2. Then
-placing the following lines in your frozen Python script before importing
-Tkinter or Tix would set the environment correctly for Tcl/Tk/Tix:
-
-import os
-import os.path
-RootDir = os.path.dirname(os.path.dirname(os.getcwd()))
-
-import sys
-if sys.platform == "win32":
-   sys.path = ['', '..\\..\\lib\\python-2.0']
-   os.environ['TCL_LIBRARY'] = RootDir + '\\lib\\tcl8.2'
-   os.environ['TK_LIBRARY'] = RootDir + '\\lib\\tk8.2'
-   os.environ['TIX_LIBRARY'] = RootDir + '\\lib\\tix8.1'
-elif sys.platform == "linux2":
-   sys.path = ['', '../../lib/python-2.0']
-   os.environ['TCL_LIBRARY'] = RootDir + '/lib/tcl8.2'
-   os.environ['TK_LIBRARY'] = RootDir + '/lib/tk8.2'
-   os.environ['TIX_LIBRARY'] = RootDir + '/lib/tix8.1'
-elif sys.platform == "solaris":
-   sys.path = ['', '../../lib/python-2.0']
-   os.environ['TCL_LIBRARY'] = RootDir + '/lib/tcl8.2'
-   os.environ['TK_LIBRARY'] = RootDir + '/lib/tk8.2'
-   os.environ['TIX_LIBRARY'] = RootDir + '/lib/tix8.1'
-
-This also adds <root>/lib/python-2.0 to your Python path
-for any Python files such as _tkinter.pyd you may need.
-
-Note that the dynamic libraries (such as tcl82.dll tk82.dll python20.dll
-under Windows, or libtcl8.2.so and libtcl8.2.so under Unix) are required
-at program load time, and are searched by the operating system loader
-before Python can be started. Under Windows, the environment
-variable PATH is consulted, and under Unix, it may be the
-environment variable LD_LIBRARY_PATH and/or the system
-shared library cache (ld.so). An additional preferred directory for
-finding the dynamic libraries is built into the .dll or .so files at
-compile time - see the LIB_RUNTIME_DIR variable in the Tcl makefile. 
-The OS must find the dynamic libraries or your frozen program won't start. 
-Usually I make sure that the .so or .dll files are in the same directory
-as the executable, but this may not be foolproof.
-
-A workaround to installing your Tcl library files with your frozen
-executable would be possible, in which the Tcl/Tk library files are
-incorporated in a frozen Python module as string literals and written
-to a temporary location when the program runs; this is currently left
-as an exercise for the reader.  An easier approach is to freeze the
-Tcl/Tk/Tix code into the dynamic libraries using the Tcl ET code,
-or the Tix Stand-Alone-Module code. Of course, you can also simply 
-require that Tcl/Tk is required on the target installation, but be 
-careful that the version corresponds.
-
-There are some caveats using frozen Tkinter applications:
-	Under Windows if you use the -s windows option, writing
-to stdout or stderr is an error.
-	The Tcl [info nameofexecutable] will be set to where the
-program was frozen, not where it is run from.
-	The global variables argc and argv do not exist.
-
-
-A warning about shared library modules
---------------------------------------
-
-When your Python installation uses shared library modules such as 
-_tkinter.pyd, these will not be incorporated in the frozen program.
- Again, the frozen program will work when you test it, but it won't
- work when you ship it to a site without a Python installation.
-
-Freeze prints a warning when this is the case at the end of the
-freezing process:
-
-	Warning: unknown modules remain: ...
-
-When this occurs, the best thing to do is usually to rebuild Python
-using static linking only. Or use the approach described in the previous
-section to declare a library path using sys.path, and place the modules
-such as _tkinter.pyd there.
-
-
-Troubleshooting
----------------
-
-If you have trouble using Freeze for a large program, it's probably
-best to start playing with a really simple program first (like the file
-hello.py).  If you can't get that to work there's something
-fundamentally wrong -- perhaps you haven't installed Python.  To do a
-proper install, you should do "make install" in the Python root
-directory.
-
-
-Usage under Windows 95 or NT
-----------------------------
-
-Under Windows 95 or NT, you *must* use the -p option and point it to
-the top of the Python source tree.
-

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze/bkfile.py Deleted

@@ -1,47 +0,0 @@
-_orig_open = open
-
-class _BkFile:
-    def __init__(self, file, mode, bufsize):
-        import os
-        self.__filename = file
-        self.__backup = file + '~'
-        try:
-            os.unlink(self.__backup)
-        except os.error:
-            pass
-        try:
-            os.rename(file, self.__backup)
-        except os.error:
-            self.__backup = None
-        self.__file = _orig_open(file, mode, bufsize)
-        self.closed = self.__file.closed
-        self.fileno = self.__file.fileno
-        self.flush = self.__file.flush
-        self.isatty = self.__file.isatty
-        self.mode = self.__file.mode
-        self.name = self.__file.name
-        self.read = self.__file.read
-        self.readinto = self.__file.readinto
-        self.readline = self.__file.readline
-        self.readlines = self.__file.readlines
-        self.seek = self.__file.seek
-        self.softspace = self.__file.softspace
-        self.tell = self.__file.tell
-        self.truncate = self.__file.truncate
-        self.write = self.__file.write
-        self.writelines = self.__file.writelines
-
-    def close(self):
-        self.__file.close()
-        if self.__backup is None:
-            return
-        import filecmp
-        if filecmp.cmp(self.__backup, self.__filename, shallow = 0):
-            import os
-            os.unlink(self.__filename)
-            os.rename(self.__backup, self.__filename)
-
-def open(file, mode = 'r', bufsize = -1):
-    if 'w' not in mode:
-        return _orig_open(file, mode, bufsize)
-    return _BkFile(file, mode, bufsize)

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze/checkextensions.py Deleted

@@ -1,90 +0,0 @@
-# Check for a module in a set of extension directories.
-# An extension directory should contain a Setup file
-# and one or more .o files or a lib.a file.
-
-import os
-import parsesetup
-
-def checkextensions(unknown, extensions):
-    files = []
-    modules = []
-    edict = {}
-    for e in extensions:
-        setup = os.path.join(e, 'Setup')
-        liba = os.path.join(e, 'lib.a')
-        if not os.path.isfile(liba):
-            liba = None
-        edict[e] = parsesetup.getsetupinfo(setup), liba
-    for mod in unknown:
-        for e in extensions:
-            (mods, vars), liba = edict[e]
-            if not mods.has_key(mod):
-                continue
-            modules.append(mod)
-            if liba:
-                # If we find a lib.a, use it, ignore the
-                # .o files, and use *all* libraries for
-                # *all* modules in the Setup file
-                if liba in files:
-                    break
-                files.append(liba)
-                for m in mods.keys():
-                    files = files + select(e, mods, vars,
-                                           m, 1)
-                break
-            files = files + select(e, mods, vars, mod, 0)
-            break
-    return files, modules
-
-def select(e, mods, vars, mod, skipofiles):
-    files = []
-    for w in mods[mod]:
-        w = treatword(w)
-        if not w:
-            continue
-        w = expandvars(w, vars)
-        for w in w.split():
-            if skipofiles and w[-2:] == '.o':
-                continue
-            # Assume $var expands to absolute pathname
-            if w[0] not in ('-', '$') and w[-2:] in ('.o', '.a'):
-                w = os.path.join(e, w)
-            if w[:2] in ('-L', '-R') and w[2:3] != '$':
-                w = w[:2] + os.path.join(e, w[2:])
-            files.append(w)
-    return files
-
-cc_flags = ['-I', '-D', '-U']
-cc_exts = ['.c', '.C', '.cc', '.c++']
-
-def treatword(w):
-    if w[:2] in cc_flags:
-        return None
-    if w[:1] == '-':
-        return w # Assume loader flag
-    head, tail = os.path.split(w)
-    base, ext = os.path.splitext(tail)
-    if ext in cc_exts:
-        tail = base + '.o'
-        w = os.path.join(head, tail)
-    return w
-
-def expandvars(str, vars):
-    i = 0
-    while i < len(str):
-        i = k = str.find('$', i)
-        if i < 0:
-            break
-        i = i+1
-        var = str[i:i+1]
-        i = i+1
-        if var == '(':
-            j = str.find(')', i)
-            if j < 0:
-                break
-            var = str[i:j]
-            i = j+1
-        if vars.has_key(var):
-            str = str[:k] + vars[var] + str[i:]
-            i = k
-    return str

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze/checkextensions_win32.py Deleted

@@ -1,188 +0,0 @@
-"""Extension management for Windows.
-
-Under Windows it is unlikely the .obj files are of use, as special compiler options
-are needed (primarily to toggle the behavior of "public" symbols.
-
-I dont consider it worth parsing the MSVC makefiles for compiler options.  Even if
-we get it just right, a specific freeze application may have specific compiler
-options anyway (eg, to enable or disable specific functionality)
-
-So my basic stragtegy is:
-
-* Have some Windows INI files which "describe" one or more extension modules.
-  (Freeze comes with a default one for all known modules - but you can specify
-  your own).
-* This description can include:
-  - The MSVC .dsp file for the extension.  The .c source file names
-    are extraced from there.
-  - Specific compiler/linker options
-  - Flag to indicate if Unicode compilation is expected.
-
-At the moment the name and location of this INI file is hardcoded,
-but an obvious enhancement would be to provide command line options.
-"""
-
-import os, sys
-try:
-    import win32api
-except ImportError:
-    win32api = None # User has already been warned
-
-class CExtension:
-    """An abstraction of an extension implemented in C/C++
-    """
-    def __init__(self, name, sourceFiles):
-        self.name = name
-        # A list of strings defining additional compiler options.
-        self.sourceFiles = sourceFiles
-        # A list of special compiler options to be applied to
-        # all source modules in this extension.
-        self.compilerOptions = []
-        # A list of .lib files the final .EXE will need.
-        self.linkerLibs = []
-
-    def GetSourceFiles(self):
-        return self.sourceFiles
-
-    def AddCompilerOption(self, option):
-        self.compilerOptions.append(option)
-    def GetCompilerOptions(self):
-        return self.compilerOptions
-
-    def AddLinkerLib(self, lib):
-        self.linkerLibs.append(lib)
-    def GetLinkerLibs(self):
-        return self.linkerLibs
-
-def checkextensions(unknown, extra_inis, prefix):
-    # Create a table of frozen extensions
-
-    defaultMapName = os.path.join( os.path.split(sys.argv[0])[0], "extensions_win32.ini")
-    if not os.path.isfile(defaultMapName):
-        sys.stderr.write("WARNING: %s can not be found - standard extensions may not be found\n" % defaultMapName)
-    else:
-        # must go on end, so other inis can override.
-        extra_inis.append(defaultMapName)
-
-    ret = []
-    for mod in unknown:
-        for ini in extra_inis:
-#                       print "Looking for", mod, "in", win32api.GetFullPathName(ini),"...",
-            defn = get_extension_defn( mod, ini, prefix )
-            if defn is not None:
-#                               print "Yay - found it!"
-                ret.append( defn )
-                break
-#                       print "Nope!"
-        else: # For not broken!
-            sys.stderr.write("No definition of module %s in any specified map file.\n" % (mod))
-
-    return ret
-
-def get_extension_defn(moduleName, mapFileName, prefix):
-    if win32api is None: return None
-    os.environ['PYTHONPREFIX'] = prefix
-    dsp = win32api.GetProfileVal(moduleName, "dsp", "", mapFileName)
-    if dsp=="":
-        return None
-
-    # We allow environment variables in the file name
-    dsp = win32api.ExpandEnvironmentStrings(dsp)
-    # If the path to the .DSP file is not absolute, assume it is relative
-    # to the description file.
-    if not os.path.isabs(dsp):
-        dsp = os.path.join( os.path.split(mapFileName)[0], dsp)
-    # Parse it to extract the source files.
-    sourceFiles = parse_dsp(dsp)
-    if sourceFiles is None:
-        return None
-
-    module = CExtension(moduleName, sourceFiles)
-    # Put the path to the DSP into the environment so entries can reference it.
-    os.environ['dsp_path'] = os.path.split(dsp)[0]
-    os.environ['ini_path'] = os.path.split(mapFileName)[0]
-
-    cl_options = win32api.GetProfileVal(moduleName, "cl", "", mapFileName)
-    if cl_options:
-        module.AddCompilerOption(win32api.ExpandEnvironmentStrings(cl_options))
-
-    exclude = win32api.GetProfileVal(moduleName, "exclude", "", mapFileName)
-    exclude = exclude.split()
-
-    if win32api.GetProfileVal(moduleName, "Unicode", 0, mapFileName):
-        module.AddCompilerOption('/D UNICODE /D _UNICODE')
-
-    libs = win32api.GetProfileVal(moduleName, "libs", "", mapFileName).split()
-    for lib in libs:
-        module.AddLinkerLib(win32api.ExpandEnvironmentStrings(lib))
-
-    for exc in exclude:
-        if exc in module.sourceFiles:
-            modules.sourceFiles.remove(exc)
-
-    return module
-
-# Given an MSVC DSP file, locate C source files it uses
-# returns a list of source files.
-def parse_dsp(dsp):
-#       print "Processing", dsp
-    # For now, only support
-    ret = []
-    dsp_path, dsp_name = os.path.split(dsp)
-    try:
-        lines = open(dsp, "r").readlines()
-    except IOError, msg:
-        sys.stderr.write("%s: %s\n" % (dsp, msg))
-        return None
-    for line in lines:
-        fields = line.strip().split("=", 2)
-        if fields[0]=="SOURCE":
-            if os.path.splitext(fields[1])[1].lower() in ['.cpp', '.c']:
-                ret.append( win32api.GetFullPathName(os.path.join(dsp_path, fields[1] ) ) )
-    return ret
-
-def write_extension_table(fname, modules):
-    fp = open(fname, "w")
-    try:
-        fp.write (ext_src_header)
-        # Write fn protos
-        for module in modules:
-            # bit of a hack for .pyd's as part of packages.
-            name = module.name.split('.')[-1]
-            fp.write('extern void init%s(void);\n' % (name) )
-        # Write the table
-        fp.write (ext_tab_header)
-        for module in modules:
-            name = module.name.split('.')[-1]
-            fp.write('\t{"%s", init%s},\n' % (name, name) )
-
-        fp.write (ext_tab_footer)
-        fp.write(ext_src_footer)
-    finally:
-        fp.close()
-
-
-ext_src_header = """\
-#include "Python.h"
-"""
-
-ext_tab_header = """\
-
-static struct _inittab extensions[] = {
-"""
-
-ext_tab_footer = """\
-        /* Sentinel */
-        {0, 0}
-};
-"""
-
-ext_src_footer = """\
-extern DL_IMPORT(int) PyImport_ExtendInittab(struct _inittab *newtab);
-
-int PyInitFrozenExtensions()
-{
-        return PyImport_ExtendInittab(extensions);
-}
-
-"""

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze/extensions_win32.ini Deleted

@@ -1,171 +0,0 @@
-; This is a list of modules generally build as .pyd files.
-;
-; Each section contains enough information about a module for
-; freeze to include the module as a static, built-in module
-; in a frozen .EXE/.DLL.
-
-; This is all setup for all the win32 extension modules
-; released by Mark Hammond.
-; You must ensure that the environment variable PYTHONEX is set 
-; to point to the root win32 extensions directory
-
-; PYTHONPREFIX must point to the Python build root directory
-; (the *parent* of PCbuild); normally the freeze script takes
-; care of this.
-
-
-
-
-
-;--------------------------------------------------------------
-;
-; Standard Python extension modules
-;
-
-; Here are some of the standard Python extensions modules.
-; If you need others, add them here
-
-[_socket]
-dsp=%PYTHONPREFIX%\PCBuild\_socket.dsp
-
-[_sre]
-dsp=%PYTHONPREFIX%\PCBuild\_sre.dsp
-
-[unicodedata]
-dsp=%PYTHONPREFIX%\PCBuild\unicodedata.dsp
-
-[mmap]
-dsp=%PYTHONPREFIX%\PCBuild\mmap.dsp
-
-[winsound]
-dsp=%PYTHONPREFIX%\PCBuild\winsound.dsp
-libs=winmm.lib
-
-[parser]
-dsp=%PYTHONPREFIX%\PCBuild\parser.dsp
-
-[select]
-dsp=%PYTHONPREFIX%\PCBuild\select.dsp
-
-[zlib]
-dsp=%PYTHONPREFIX%\PCBuild\zlib.dsp
-cl=/I %PYTHONPREFIX%\..\zlib-1.1.4 /D _WINDOWS /D WIN32 
-libs=%PYTHONPREFIX%\..\zlib-1.1.4\zlib.lib /nodefaultlib:libc
-
-[_winreg]
-dsp=%PYTHONPREFIX%\PCBuild\winreg.dsp
-libs=advapi32.lib
-
-
-;--------------------------------------------------------------
-;
-; Win32 Projects.
-;
-[perfmon]
-dsp=%PYTHONEX%\win32\perfmon.dsp
-cl=/I %PYTHONEX%\win32\src
-Unicode=1
-
-[pywintypes]
-dsp=%PYTHONEX%\win32\pywintypes.dsp
-cl=/I %PYTHONEX%\win32\src
-libs=ole32.lib oleaut32.lib
-
-[win32api]
-dsp=%PYTHONEX%\win32\win32api.dsp
-cl=/I %PYTHONEX%\win32\src
-libs=kernel32.lib user32.lib shell32.lib advapi32.lib
-
-[win32service]
-dsp=%PYTHONEX%\win32\win32service.dsp
-cl=/I %PYTHONEX%\win32\src
-Unicode=1
-libs=advapi32.lib
-
-[win32evtlog]
-dsp=%PYTHONEX%\win32\win32evtlog.dsp
-cl=/I %PYTHONEX%\win32\src
-
-[win32process]
-dsp=%PYTHONEX%\win32\win32process.dsp
-cl=/I %PYTHONEX%\win32\src
-
-[win32event]
-dsp=%PYTHONEX%\win32\win32event.dsp
-cl=/I %PYTHONEX%\win32\src
-
-[win32file]
-dsp=%PYTHONEX%\win32\win32file.dsp 
-cl=/I %PYTHONEX%\win32\src
-
-[win32net]
-dsp=%PYTHONEX%\win32\win32net.dsp
-cl=/I %PYTHONEX%\win32\src
-libs=netapi32.lib
-
-[win32pdh]
-dsp=%PYTHONEX%\win32\win32pdh.dsp
-cl=/I %PYTHONEX%\win32\src
-
-[win32pipe]
-dsp=%PYTHONEX%\win32\win32pipe.dsp 
-cl=/I %PYTHONEX%\win32\src
-
-[win32security]
-dsp=%PYTHONEX%\win32\win32security.dsp
-cl=/I %PYTHONEX%\win32\src
-
-[win32service]
-dsp=%PYTHONEX%\win32\win32service.dsp
-cl=/I %PYTHONEX%\win32\src
-
-[win32trace]
-dsp=%PYTHONEX%\win32\win32trace.dsp
-cl=/I %PYTHONEX%\win32\src
-
-;--------------------------------------------------------------
-;
-; COM Projects.
-;
-
-[pythoncom]
-dsp=%PYTHONEX%\com\win32com.dsp
-cl=/I %PYTHONEX%\com\win32com\src\include /I %PYTHONEX%\win32\src
-libs=uuid.lib
-
-[win32com.axcontrol.axcontrol]
-dsp=%PYTHONEX%\com\axcontrol.dsp
-cl=/I %PYTHONEX%\win32\src /I %PYTHONEX%\com\win32com\src\include
-
-[win32com.axscript.axscript]
-dsp=%PYTHONEX%\com\Active Scripting.dsp
-cl=/I %PYTHONEX%\win32\src /I %PYTHONEX%\com\win32com\src\include
-
-[win32com.axdebug.axdebug]
-dsp=%PYTHONEX%\com\Active Debugging.dsp
-cl=/I %PYTHONEX%\win32\src /I %PYTHONEX%\com\win32com\src\include
-
-[win32com.mapi.mapi]
-dsp=%PYTHONEX%\com\mapi.dsp
-cl=/I %PYTHONEX%\win32\src /I %PYTHONEX%\com\win32com\src\include
-libs=MBLOGON.lib ADDRLKUP.LIB mapi32.lib version.lib
-
-[win32com.mapi.exchange]
-dsp=%PYTHONEX%\com\exchange.dsp
-cl=/I %PYTHONEX%\win32\src /I %PYTHONEX%\com\win32com\src\include
-libs=MBLOGON.lib ADDRLKUP.LIB exchinst.lib EDKCFG.LIB EDKUTILS.LIB EDKMAPI.LIB mapi32.lib version.lib
-
-[win32com.mapi.exchdapi]
-dsp=%PYTHONEX%\com\exchdapi.dsp
-cl=/I %PYTHONEX%\win32\src /I %PYTHONEX%\com\win32com\src\include
-libs=DAPI.LIB
-
-[servicemanager]
-dsp=%PYTHONEX%\win32\PythonService EXE.dsp
-Unicode = 1
-
-; Pythonwin
-[win32ui]
-dsp=%PYTHONEX%\Pythonwin\win32ui.dsp
-cl=/D _AFXDLL /D FREEZE_WIN32UI /GX /I %PYTHONEX%\win32\src
-libs=mfc42.lib

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze/freeze.py Deleted

@@ -1,503 +0,0 @@
-#! /usr/bin/env python
-
-"""Freeze a Python script into a binary.
-
-usage: freeze [options...] script [module]...
-
-Options:
--p prefix:    This is the prefix used when you ran ``make install''
-              in the Python build directory.
-              (If you never ran this, freeze won't work.)
-              The default is whatever sys.prefix evaluates to.
-              It can also be the top directory of the Python source
-              tree; then -P must point to the build tree.
-
--P exec_prefix: Like -p but this is the 'exec_prefix', used to
-                install objects etc.  The default is whatever sys.exec_prefix
-                evaluates to, or the -p argument if given.
-                If -p points to the Python source tree, -P must point
-                to the build tree, if different.
-
--e extension: A directory containing additional .o files that
-              may be used to resolve modules.  This directory
-              should also have a Setup file describing the .o files.
-              On Windows, the name of a .INI file describing one
-              or more extensions is passed.
-              More than one -e option may be given.
-
--o dir:       Directory where the output files are created; default '.'.
-
--m:           Additional arguments are module names instead of filenames.
-
--a package=dir: Additional directories to be added to the package's
-                __path__.  Used to simulate directories added by the
-                package at runtime (eg, by OpenGL and win32com).
-                More than one -a option may be given for each package.
-
--l file:      Pass the file to the linker (windows only)
-
--d:           Debugging mode for the module finder.
-
--q:           Make the module finder totally quiet.
-
--h:           Print this help message.
-
--x module     Exclude the specified module. It will still be imported
-              by the frozen binary if it exists on the host system.
-
--X module     Like -x, except the module can never be imported by
-              the frozen binary.
-
--E:           Freeze will fail if any modules can't be found (that
-              were not excluded using -x or -X).
-
--i filename:  Include a file with additional command line options.  Used
-              to prevent command lines growing beyond the capabilities of
-              the shell/OS.  All arguments specified in filename
-              are read and the -i option replaced with the parsed
-              params (note - quoting args in this file is NOT supported)
-
--s subsystem: Specify the subsystem (For Windows only.);
-              'console' (default), 'windows', 'service' or 'com_dll'
-
--w:           Toggle Windows (NT or 95) behavior.
-              (For debugging only -- on a win32 platform, win32 behavior
-              is automatic.)
-
--r prefix=f:  Replace path prefix.
-              Replace prefix with f in the source path references
-              contained in the resulting binary.
-
-Arguments:
-
-script:       The Python script to be executed by the resulting binary.
-
-module ...:   Additional Python modules (referenced by pathname)
-              that will be included in the resulting binary.  These
-              may be .py or .pyc files.  If -m is specified, these are
-              module names that are search in the path instead.
-
-NOTES:
-
-In order to use freeze successfully, you must have built Python and
-installed it ("make install").
-
-The script should not use modules provided only as shared libraries;
-if it does, the resulting binary is not self-contained.
-"""
-
-
-# Import standard modules
-
-import modulefinder
-import getopt
-import os
-import sys
-
-
-# Import the freeze-private modules
-
-import checkextensions
-import makeconfig
-import makefreeze
-import makemakefile
-import parsesetup
-import bkfile
-
-
-# Main program
-
-def main():
-    # overridable context
-    prefix = None                       # settable with -p option
-    exec_prefix = None                  # settable with -P option
-    extensions = []
-    exclude = []                        # settable with -x option
-    addn_link = []      # settable with -l, but only honored under Windows.
-    path = sys.path[:]
-    modargs = 0
-    debug = 1
-    odir = ''
-    win = sys.platform[:3] == 'win'
-    replace_paths = []                  # settable with -r option
-    error_if_any_missing = 0
-
-    # default the exclude list for each platform
-    if win: exclude = exclude + [
-        'dos', 'dospath', 'mac', 'macpath', 'macfs', 'MACFS', 'posix',
-        'os2', 'ce', 'riscos', 'riscosenviron', 'riscospath',
-        ]
-
-    fail_import = exclude[:]
-
-    # output files
-    frozen_c = 'frozen.c'
-    config_c = 'config.c'
-    target = 'a.out'                    # normally derived from script name
-    makefile = 'Makefile'
-    subsystem = 'console'
-
-    # parse command line by first replacing any "-i" options with the
-    # file contents.
-    pos = 1
-    while pos < len(sys.argv)-1:
-        # last option can not be "-i", so this ensures "pos+1" is in range!
-        if sys.argv[pos] == '-i':
-            try:
-                options = open(sys.argv[pos+1]).read().split()
-            except IOError, why:
-                usage("File name '%s' specified with the -i option "
-                      "can not be read - %s" % (sys.argv[pos+1], why) )
-            # Replace the '-i' and the filename with the read params.
-            sys.argv[pos:pos+2] = options
-            pos = pos + len(options) - 1 # Skip the name and the included args.
-        pos = pos + 1
-
-    # Now parse the command line with the extras inserted.
-    try:
-        opts, args = getopt.getopt(sys.argv[1:], 'r:a:dEe:hmo:p:P:b:qs:wX:x:l:')
-    except getopt.error, msg:
-        usage('getopt error: ' + str(msg))
-
-    # proces option arguments
-    for o, a in opts:
-        if o == '-h':
-            print __doc__
-            return
-        if o == '-b':
-            binlib = a
-        if o == '-d':
-            debug = debug + 1
-        if o == '-e':
-            extensions.append(a)
-        if o == '-m':
-            modargs = 1
-        if o == '-o':
-            odir = a
-        if o == '-p':
-            prefix = a
-        if o == '-P':
-            exec_prefix = a
-        if o == '-q':
-            debug = 0
-        if o == '-w':
-            win = not win
-        if o == '-s':
-            if not win:
-                usage("-s subsystem option only on Windows")
-            subsystem = a
-        if o == '-x':
-            exclude.append(a)
-        if o == '-X':
-            exclude.append(a)
-            fail_import.append(a)
-        if o == '-E':
-            error_if_any_missing = 1
-        if o == '-l':
-            addn_link.append(a)
-        if o == '-a':
-            apply(modulefinder.AddPackagePath, tuple(a.split("=", 2)))

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze/hello.py Deleted

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze/makeconfig.py Deleted

@@ -1,61 +0,0 @@
-import re
-
-
-# Write the config.c file
-
-never = ['marshal', '__main__', '__builtin__', 'sys', 'exceptions', '_warnings']
-
-def makeconfig(infp, outfp, modules, with_ifdef=0):
-    m1 = re.compile('-- ADDMODULE MARKER 1 --')
-    m2 = re.compile('-- ADDMODULE MARKER 2 --')
-    while 1:
-        line = infp.readline()
-        if not line: break
-        outfp.write(line)
-        if m1 and m1.search(line):
-            m1 = None
-            for mod in modules:
-                if mod in never:
-                    continue
-                if with_ifdef:
-                    outfp.write("#ifndef init%s\n"%mod)
-                outfp.write('extern void init%s(void);\n' % mod)
-                if with_ifdef:
-                    outfp.write("#endif\n")
-        elif m2 and m2.search(line):
-            m2 = None
-            for mod in modules:
-                if mod in never:
-                    continue
-                outfp.write('\t{"%s", init%s},\n' %
-                            (mod, mod))
-    if m1:
-        sys.stderr.write('MARKER 1 never found\n')
-    elif m2:
-        sys.stderr.write('MARKER 2 never found\n')
-
-
-# Test program.
-
-def test():
-    import sys
-    if not sys.argv[3:]:
-        print 'usage: python makeconfig.py config.c.in outputfile',
-        print 'modulename ...'
-        sys.exit(2)
-    if sys.argv[1] == '-':
-        infp = sys.stdin
-    else:
-        infp = open(sys.argv[1])
-    if sys.argv[2] == '-':
-        outfp = sys.stdout
-    else:
-        outfp = open(sys.argv[2], 'w')
-    makeconfig(infp, outfp, sys.argv[3:])
-    if outfp != sys.stdout:
-        outfp.close()
-    if infp != sys.stdin:
-        infp.close()
-
-if __name__ == '__main__':
-    test()

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze/makefreeze.py Deleted

@@ -1,90 +0,0 @@
-import marshal
-import bkfile
-
-
-# Write a file containing frozen code for the modules in the dictionary.
-
-header = """
-#include "Python.h"
-
-static struct _frozen _PyImport_FrozenModules[] = {
-"""
-trailer = """\
-    {0, 0, 0} /* sentinel */
-};
-"""
-
-# if __debug__ == 0 (i.e. -O option given), set Py_OptimizeFlag in frozen app.
-default_entry_point = """
-int
-main(int argc, char **argv)
-{
-        extern int Py_FrozenMain(int, char **);
-""" + ((not __debug__ and """
-        Py_OptimizeFlag++;
-""") or "")  + """
-        PyImport_FrozenModules = _PyImport_FrozenModules;
-        return Py_FrozenMain(argc, argv);
-}
-
-"""
-
-def makefreeze(base, dict, debug=0, entry_point=None, fail_import=()):
-    if entry_point is None: entry_point = default_entry_point
-    done = []
-    files = []
-    mods = dict.keys()
-    mods.sort()
-    for mod in mods:
-        m = dict[mod]
-        mangled = "__".join(mod.split("."))
-        if m.__code__:
-            file = 'M_' + mangled + '.c'
-            outfp = bkfile.open(base + file, 'w')
-            files.append(file)
-            if debug:
-                print "freezing", mod, "..."
-            str = marshal.dumps(m.__code__)
-            size = len(str)
-            if m.__path__:
-                # Indicate package by negative size
-                size = -size
-            done.append((mod, mangled, size))
-            writecode(outfp, mangled, str)
-            outfp.close()
-    if debug:
-        print "generating table of frozen modules"
-    outfp = bkfile.open(base + 'frozen.c', 'w')
-    for mod, mangled, size in done:
-        outfp.write('extern unsigned char M_%s[];\n' % mangled)
-    outfp.write(header)
-    for mod, mangled, size in done:
-        outfp.write('\t{"%s", M_%s, %d},\n' % (mod, mangled, size))
-    outfp.write('\n')
-    # The following modules have a NULL code pointer, indicating
-    # that the prozen program should not search for them on the host
-    # system. Importing them will *always* raise an ImportError.
-    # The zero value size is never used.
-    for mod in fail_import:
-        outfp.write('\t{"%s", NULL, 0},\n' % (mod,))
-    outfp.write(trailer)
-    outfp.write(entry_point)
-    outfp.close()
-    return files
-
-
-
-# Write a C initializer for a module containing the frozen python code.
-# The array is called M_<mod>.
-
-def writecode(outfp, mod, str):
-    outfp.write('unsigned char M_%s[] = {' % mod)
-    for i in range(0, len(str), 16):
-        outfp.write('\n\t')
-        for c in str[i:i+16]:
-            outfp.write('%d,' % ord(c))
-    outfp.write('\n};\n')
-
-## def writecode(outfp, mod, str):
-##     outfp.write('unsigned char M_%s[%d] = "%s";\n' % (mod, len(str),
-##     '\\"'.join(map(lambda s: repr(s)[1:-1], str.split('"')))))

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze/makemakefile.py Deleted

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze/parsesetup.py Deleted

@@ -1,112 +0,0 @@
-# Parse Makefiles and Python Setup(.in) files.
-
-import re
-
-
-# Extract variable definitions from a Makefile.
-# Return a dictionary mapping names to values.
-# May raise IOError.
-
-makevardef = re.compile('^([a-zA-Z0-9_]+)[ \t]*=(.*)')
-
-def getmakevars(filename):
-    variables = {}
-    fp = open(filename)
-    pendingline = ""
-    try:
-        while 1:
-            line = fp.readline()
-            if pendingline:
-                line = pendingline + line
-                pendingline = ""
-            if not line:
-                break
-            if line.endswith('\\\n'):
-                pendingline = line[:-2]
-            matchobj = makevardef.match(line)
-            if not matchobj:
-                continue
-            (name, value) = matchobj.group(1, 2)
-            # Strip trailing comment
-            i = value.find('#')
-            if i >= 0:
-                value = value[:i]
-            value = value.strip()
-            variables[name] = value
-    finally:
-        fp.close()
-    return variables
-
-
-# Parse a Python Setup(.in) file.
-# Return two dictionaries, the first mapping modules to their
-# definitions, the second mapping variable names to their values.
-# May raise IOError.
-
-setupvardef = re.compile('^([a-zA-Z0-9_]+)=(.*)')
-
-def getsetupinfo(filename):
-    modules = {}
-    variables = {}
-    fp = open(filename)
-    pendingline = ""
-    try:
-        while 1:
-            line = fp.readline()
-            if pendingline:
-                line = pendingline + line
-                pendingline = ""
-            if not line:
-                break
-            # Strip comments
-            i = line.find('#')
-            if i >= 0:
-                line = line[:i]
-            if line.endswith('\\\n'):
-                pendingline = line[:-2]
-                continue
-            matchobj = setupvardef.match(line)
-            if matchobj:
-                (name, value) = matchobj.group(1, 2)
-                variables[name] = value.strip()
-            else:
-                words = line.split()
-                if words:
-                    modules[words[0]] = words[1:]
-    finally:
-        fp.close()
-    return modules, variables
-
-
-# Test the above functions.
-
-def test():
-    import sys
-    import os
-    if not sys.argv[1:]:
-        print 'usage: python parsesetup.py Makefile*|Setup* ...'
-        sys.exit(2)
-    for arg in sys.argv[1:]:
-        base = os.path.basename(arg)
-        if base[:8] == 'Makefile':
-            print 'Make style parsing:', arg
-            v = getmakevars(arg)
-            prdict(v)
-        elif base[:5] == 'Setup':
-            print 'Setup style parsing:', arg
-            m, v = getsetupinfo(arg)
-            prdict(m)
-            prdict(v)
-        else:
-            print arg, 'is neither a Makefile nor a Setup file'
-            print '(name must begin with "Makefile" or "Setup")'
-
-def prdict(d):
-    keys = d.keys()
-    keys.sort()
-    for key in keys:
-        value = d[key]
-        print "%-15s" % key, str(value)
-
-if __name__ == '__main__':
-    test()

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze/win32.html Deleted

@@ -1,119 +0,0 @@
-<HTML>
-<HEAD>
-<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=windows-1252">
-<META NAME="Generator" CONTENT="Microsoft Word 97">
-<TITLE>win32</TITLE>
-<META NAME="Version" CONTENT="8.0.3410">
-<META NAME="Date" CONTENT="10/11/96">
-<META NAME="Template" CONTENT="D:\Program Files\Microsoft Office\Office\HTML.DOT">
-</HEAD>
-<BODY TEXT="#000000" BGCOLOR="#ffffff">
-
-<H1>Freeze for Win32</H1>
-<P>This document describes how to use Freeze for the Win32 platform.  </P>
-<P>Freeze itself is a Python tool for creating stand-alone executables from Python source code.  This document does not attempt to document freeze itself - only the win32 specific changes.</P>
-<H2>Frozen programs under Win32</H2>
-<P>Frozen programs under Win32 can (theoretically) freeze any type of program supported by Python on Win32 - At the moment, Console .EXE and NT Service .EXE programs are supported.  GUI Python programs and COM .EXE programs are very nearly all ready to go.</P>
-<H3>Program Dependencies</H3>
-<P>The person freezing the program has control over what external DLLs are required by a frozen program.  The following dependencies are supported:</P>
-<H4>Minimal frozen programs</H4>
-<P>These programs freeze only .py files in your program.  All external DLLs are required at run-time.  This includes all .pyd/.dll modules used by your program, Python20.dll, and msvcrt.dll.  </P>
-<P>A small Python program would typically create a .EXE around 300kb.</P>
-<H4>Frozen Extension programs</H4>
-<B><I><P>Note:</B></I> For Python1.5.1, you must get a patch from Guido to import.c for this to work.</P>
-<P>These programs also freeze in the sources from all .pyd and .dll files used at runtime.  This means the resulting .EXE is only dependent on Python20.dll and msvcrt.dll.</P>
-<P>A small Python program using win32api, win32con and one or 2 other win32 extensions would typically create a .EXE around 400kb.</P>
-<H4>Completely frozen programs</H4>
-<P>Completely stand-alone programs, as is the default on Unix systems.  These are currently not supported, mainly as the size of a decent Python program gets very large.  However, by tweaking the existing Unix support, this would not be difficult to do.</P>
-<H2>Freezing Extension Modules</H2>
-<P>By default, a file in the main "freeze" directory called "extensions_win32.ini" is used to obtain information about frozen extensions.  A typical entry is:</P>
-<CODE><P>[win32api]</P>
-<P>dsp=%PYTHONEX%\win32\win32api.dsp</P>
-<P>cl=/I %PYTHONEX%\win32\src</P>
-<P>libs=kernel32.lib user32.lib shell32.lib advapi32.lib</P>
-</CODE><P>&nbsp;</P>
-<P>This entry indicates that the win32api extension module is defined in the MSVC project file "<CODE>%PYTHONEX%\win32\win32api.dsp</CODE>".  Note the use of<CODE> </CODE>"<CODE>%PYTHONEX%" </CODE>- most strings are substituted with environment variables. In this case, it is assumed variable PYTHONEX points to the main "Python Extensions" source directory (which is assumed to be in the same structure as the release of the extension sources).</P>
-<P>An entry in a .INI file can also control specific compiler options, and also the .lib files necessary to be linked with the application.</P>
-<H3>Freezing Extension Module Considerations</H3>
-<P>To prevent freezing extension modules, simply exclude that module using the freeze "-x" switch.</P>
-<P>Occasionally, it will be necessary to explicitly include dependent modules.  For example, many win32 modules are dependent on the "pywintypes" module - for example, the win32api module.  In this case, the module may be explicitly included using the freeze "-m" option.</P>
-<H3>Freezing win32com and PythonCOM</H3>
-<P>PythonCOM.dll can be frozen as long as you are not implementing COM Servers.  Ie, you can freeze programs which control other applications, but can not implement programs that are themselves controlled by other applications.</P>
-<P>If you use any of the win32com .pyd extensions (ex, axscript, mapi, internet, axcontrol), then you will need to specify an additional "-a" option to point to the win32comext directory.  There is an example below.</P>
-<P>The use of the "win32com.client.gencache" module is not supported (although could be quite easily??)</P>
-<H2>Examples</H2>
-<P>Before we start, we must:</P>
-<CODE><P>D:\temp\delme&gt;set PYTHONEX=d:\src\pythonex</P>
-</CODE><H3>Helloworld.py</H3>
-<H4>Source Code</H4><DIR>
-<DIR>
-
-<CODE><P>import sys</P>
-<P>&nbsp;</P>
-<P>print " ".join( ["Hello", "world"] + sys.argv[1:] )</P></DIR>
-</DIR>
-
-</CODE><H4>Command Line used</H4><DIR>
-<DIR>
-
-<FONT FACE="Courier New" SIZE=2><P>\src\python-1.5.1\tools\freeze\freeze.py helloworld.py</P>
-<P>nmake</P></DIR>
-</DIR>
-
-</FONT><P>Resulting helloworld.exe: 114,688 bytes.</P>
-<H3>Helloworld2.py</H3>
-<P>Uses win32api.  Demonstrates requirement for pywintypes, and difference between freezing extensions and not.</P>
-<H4>Source Code</H4><DIR>
-<DIR>
-
-<P>import win32api</P>
-<P>print "Hello from", win32api.GetComputerName()</P></DIR>
-</DIR>
-
-<H4>Command Line used</H4>
-<P>By default, win32api will be frozen in with the .EXE.  If you do not provide the "pywintypes" inclusion, then the link step will fail looking for all the pywintypes modules.</P><DIR>
-<DIR>
-
-<FONT FACE="Courier New" SIZE=2><P>\src\python-1.5.1\tools\freeze\freeze.py helloworld2.py -m pywintypes</P>
-<P>nmake</P></DIR>
-</DIR>
-
-</FONT><P>Resulting helloworld2.exe: 167,936 bytes</P>
-<P>Simply adding win32con to the mix gives an EXE of size: 352,768 bytes.</P>
-<H4>Command Line used</H4>
-<P>Using this build, we are dependent at runtime on the win32api.pyd and pywintypes15.dll files.</P><DIR>
-<DIR>
-
-<P>\src\python-1.5.1\tools\freeze\freeze.py -x win32api helloworld.py</P></DIR>
-</DIR>
-
-<P>Resulting helloworld2.exe: 114,688</P>
-<P>Adding win32con to this build results in a size of: 252,928</P>
-<H3>Testmapi.py</H3>
-<P>Uses MAPI, a PythonCOM extension, and win32api.</P>
-<H4>Source Code</H4>
-<P>from win32com.mapi import mapi</P>
-<P>import win32api</P>
-<P>mapi.MAPIInitialize( (mapi.MAPI_INIT_VERSION, 0) )</P>
-<P>print "Hello from", win32api.GetComputerName()</P>
-<P>mapi.MAPIUninitialize()</P>
-<H4>Command Line used</H4>
-<P>As it does not import pythoncom or pywintypes itself, they must be specified.  As it uses the win32comext directory, -a must be used.  If you have built the win32com extensions from sources, then the second -a is required.</P><DIR>
-<DIR>
-
-<CODE><P>\src\python-1.5.1\tools\freeze\freeze.py -a win32com=%PYTHONEX%\com\win32comext -a win32com.mapi=%PYTHONEX%\com\build\release testmapi.py -m pywintypes -m pythoncom</P></DIR>
-</DIR>
-
-</CODE><P>Resulting testmapi.exe: 352,768 bytes</P>
-<H3>PipeTestService.py</H3>
-<P>This is a standard Python demo in the Win32 extensions.  It can be found in the "win32\demos\service" directory.</P>
-<H4>Command Line used</H4>
-<P>This will create a native NT Service EXE, dependent only on the main Python20.dll.  All other modules are built-in to the final .EXE</P><DIR>
-<DIR>
-
-<CODE><P>\src\python-1.5.1\tools\freeze\freeze.py -s service %PYTHONEX%\win32\demos\service\pipeTestService.py</P></DIR>
-</DIR>
-
-<P>Resulting pipeTestService.exe: </CODE><FONT FACE="Courier New" SIZE=2>533,504 bytes.</P></FONT></BODY>
-</HTML>
-

pykolab-0.7.0.tar.gz/ext/python/Tools/freeze/winmakemakefile.py Deleted

@@ -1,146 +0,0 @@
-import sys, os
-
-# Template used then the program is a GUI program
-WINMAINTEMPLATE = """
-#include <windows.h>
-
-int WINAPI WinMain(
-    HINSTANCE hInstance,      // handle to current instance
-    HINSTANCE hPrevInstance,  // handle to previous instance
-    LPSTR lpCmdLine,          // pointer to command line
-    int nCmdShow              // show state of window
-    )
-{
-    extern int Py_FrozenMain(int, char **);
-    PyImport_FrozenModules = _PyImport_FrozenModules;
-    return Py_FrozenMain(__argc, __argv);
-}
-"""
-
-SERVICETEMPLATE = """
-extern int PythonService_main(int, char **);
-
-int main( int argc, char **argv)
-{
-    PyImport_FrozenModules = _PyImport_FrozenModules;
-    return PythonService_main(argc, argv);
-}
-"""
-
-subsystem_details = {
-    # -s flag        : (C entry point template), (is it __main__?), (is it a DLL?)
-    'console'        : (None,                    1,                 0),
-    'windows'        : (WINMAINTEMPLATE,         1,                 0),
-    'service'        : (SERVICETEMPLATE,         0,                 0),
-    'com_dll'        : ("",                      0,                 1),
-}
-
-def get_custom_entry_point(subsystem):
-    try:
-        return subsystem_details[subsystem][:2]
-    except KeyError:
-        raise ValueError, "The subsystem %s is not known" % subsystem
-
-
-def makemakefile(outfp, vars, files, target):
-    save = sys.stdout
-    try:
-        sys.stdout = outfp
-        realwork(vars, files, target)
-    finally:
-        sys.stdout = save
-
-def realwork(vars, moddefns, target):
-    version_suffix = "%r%r" % sys.version_info[:2]
-    print "# Makefile for Microsoft Visual C++ generated by freeze.py script"
-    print
-    print 'target = %s' % target
-    print 'pythonhome = %s' % vars['prefix']
-    print
-    print 'DEBUG=0 # Set to 1 to use the _d versions of Python.'
-    print '!IF $(DEBUG)'
-    print 'debug_suffix=_d'
-    print 'c_debug=/Zi /Od /DDEBUG /D_DEBUG'
-    print 'l_debug=/DEBUG'
-    print 'temp_dir=Build\\Debug'
-    print '!ELSE'
-    print 'debug_suffix='
-    print 'c_debug=/Ox'
-    print 'l_debug='
-    print 'temp_dir=Build\\Release'
-    print '!ENDIF'
-    print
-
-    print '# The following line assumes you have built Python using the standard instructions'
-    print '# Otherwise fix the following line to point to the library.'
-    print 'pythonlib = "$(pythonhome)/pcbuild/python%s$(debug_suffix).lib"' % version_suffix
-    print
-
-    # We only ever write one "entry point" symbol - either
-    # "main" or "WinMain".  Therefore, there is no need to
-    # pass a subsystem switch to the linker as it works it
-    # out all by itself.  However, the subsystem _does_ determine
-    # the file extension and additional linker flags.
-    target_link_flags = ""
-    target_ext = ".exe"
-    if subsystem_details[vars['subsystem']][2]:
-        target_link_flags = "-dll"
-        target_ext = ".dll"
-
-
-    print "# As the target uses Python%s.dll, we must use this compiler option!" % version_suffix
-    print "cdl = /MD"
-    print
-    print "all: $(target)$(debug_suffix)%s" % (target_ext)
-    print
-
-    print '$(temp_dir):'
-    print '  if not exist $(temp_dir)\. mkdir $(temp_dir)'
-    print
-
-    objects = []
-    libs = ["shell32.lib", "comdlg32.lib", "wsock32.lib", "user32.lib", "oleaut32.lib"]
-    for moddefn in moddefns:
-        print "# Module", moddefn.name
-        for file in moddefn.sourceFiles:
-            base = os.path.basename(file)
-            base, ext = os.path.splitext(base)
-            objects.append(base + ".obj")
-            print '$(temp_dir)\%s.obj: "%s"' % (base, file)
-            print "\t@$(CC) -c -nologo /Fo$* $(cdl) $(c_debug) /D BUILD_FREEZE",
-            print '"-I$(pythonhome)/Include"  "-I$(pythonhome)/PC" \\'
-            print "\t\t$(cflags) $(cdebug) $(cinclude) \\"
-            extra = moddefn.GetCompilerOptions()
-            if extra:
-                print "\t\t%s \\" % (' '.join(extra),)
-            print '\t\t"%s"' % file
-            print
-
-        # Add .lib files this module needs
-        for modlib in moddefn.GetLinkerLibs():
-            if modlib not in libs:
-                libs.append(modlib)
-
-    print "ADDN_LINK_FILES=",
-    for addn in vars['addn_link']: print '"%s"' % (addn),
-    print ; print
-
-    print "OBJS=",
-    for obj in objects: print '"$(temp_dir)\%s"' % (obj),
-    print ; print
-
-    print "LIBS=",
-    for lib in libs: print '"%s"' % (lib),
-    print ; print
-
-    print "$(target)$(debug_suffix)%s: $(temp_dir) $(OBJS)" % (target_ext)
-    print "\tlink -out:$(target)$(debug_suffix)%s %s" % (target_ext, target_link_flags),
-    print "\t$(OBJS) \\"
-    print "\t$(LIBS) \\"
-    print "\t$(ADDN_LINK_FILES) \\"
-    print "\t$(pythonlib) $(lcustom) $(l_debug)\\"
-    print "\t$(resources)"
-    print
-    print "clean:"
-    print "\t-rm -f *.obj"
-    print "\t-rm -f $(target).exe"

pykolab-0.7.0.tar.gz/po/bn.po Deleted

@@ -1,2344 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-#
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: pykolab\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-08-14 11:57+0100\n"
-"PO-Revision-Date: 2012-08-11 13:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: bn\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
-
-#: ../bin/kolab_smtp_access_policy.py:206
-#, python-format
-msgid "Adding policy request to instance %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:446
-msgid "Unauthorized access not allowed"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:467
-#: ../bin/kolab_smtp_access_policy.py:657
-msgid "Could not find recipient"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:486
-#: ../bin/kolab_smtp_access_policy.py:586
-#, python-format
-msgid "Could not find envelope sender user %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:529
-#, python-format
-msgid "Obtained authenticated user details for %r: %r"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:608
-#, python-format
-msgid "%s is unauthorized to send on behalf of %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:618
-#, python-format
-msgid ""
-"User %s attempted to use envelope sender address %s without authorization"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:681
-#: ../bin/kolab_smtp_access_policy.py:692
-#, python-format
-msgid "Found user %s to be a delegate user of %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:716
-#, python-format
-msgid ""
-"Verifying authenticated sender '%(sender)s' with sasl_username "
-"'%(sasl_username)s' for recipient '%(recipient)s'"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:719
-#, python-format
-msgid ""
-"Verifying unauthenticated sender '%(sender)s' for recipient '%(recipient)s'"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:735
-#, python-format
-msgid "Reproducing verify_recipient(%s, %s) from cache"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:753
-#, python-format
-msgid "Using authentication domain %s instead of %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:763
-#, python-format
-msgid "Domain %s is a primary domain"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:771
-#, python-format
-msgid ""
-"Checking the recipient for domain %s that is not ours. This is probably a "
-"configuration error."
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:786
-msgid ""
-"This recipient address is related to multiple object entries and the SMTP "
-"Access Policy can therefore not restrict message flow"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:793
-#, python-format
-msgid ""
-"Recipient address %r not found. Allowing since the MTA was configured to "
-"accept the recipient."
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:820
-msgid "Invalid recipient"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:831
-msgid "Could not find this user, accepting"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:894
-#: ../bin/kolab_smtp_access_policy.py:945
-#, python-format
-msgid "Sender %s is not allowed to send to recipient %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:933
-#, python-format
-msgid "Reproducing verify_sender(%r) from cache"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:960
-msgid "Sender uses unauthorized envelope sender address"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:977
-msgid "Could not verify sender"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:984
-msgid ""
-"Verifying whether sender is allowed to send to recipient using sender policy"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:997
-#, python-format
-msgid "Result is %r"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1002
-msgid "No recipient policy restrictions exist for this sender"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1011
-msgid "Found a recipient policy to apply for this sender."
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1026
-#, python-format
-msgid "Sender %s not allowed to send to recipient %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1056
-msgid "Cleaning up the cache"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1093
-#, python-format
-msgid "Operational Error in caching: %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1144
-#, python-format
-msgid "Caching the policy result with timestamp %d"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1221
-#, python-format
-msgid "Returning action DEFER_IF_PERMIT: %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1226
-#, python-format
-msgid "Returning action DUNNO: %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1231
-#, python-format
-msgid "Returning action HOLD: %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1236
-#, python-format
-msgid "Returning action PERMIT: %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1241
-#, python-format
-msgid "Returning action REJECT: %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1287

pykolab-0.7.0.tar.gz/po/pykolab.pot Deleted

@@ -1,3672 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-08-07 11:26-0400\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../bin/kolab_smtp_access_policy.py:209
-#, python-format
-msgid "Adding policy request to instance %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:479
-msgid "Unauthorized access not allowed"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:508
-#: ../bin/kolab_smtp_access_policy.py:689
-msgid "Could not find recipient"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:527
-#, python-format
-msgid "Could not find envelope sender user %s (511)"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:570
-#, python-format
-msgid "Obtained authenticated user details for %r: %r"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:627
-#, python-format
-msgid "Could not find envelope sender user %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:649
-#, python-format
-msgid "%s is unauthorized to send on behalf of %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:659
-#, python-format
-msgid ""
-"User %s attempted to use envelope sender address %s without authorization"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:713
-#: ../bin/kolab_smtp_access_policy.py:724
-#, python-format
-msgid "Found user %s to be a delegate user of %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:748
-#, python-format
-msgid ""
-"Verifying authenticated sender '%(sender)s' with sasl_username '%"
-"(sasl_username)s' for recipient '%(recipient)s'"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:751
-#, python-format
-msgid ""
-"Verifying unauthenticated sender '%(sender)s' for recipient '%(recipient)s'"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:767
-#, python-format
-msgid "Reproducing verify_recipient(%s, %s) from cache"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:804
-#, python-format
-msgid "Using authentication domain %s instead of %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:814
-#, python-format
-msgid "Domain %s is a primary domain"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:822
-#, python-format
-msgid ""
-"Checking the recipient for domain %s that is not ours. This is probably a "
-"configuration error."
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:837
-msgid ""
-"This recipient address is related to multiple object entries and the SMTP "
-"Access Policy can therefore not restrict message flow"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:854
-#, python-format
-msgid ""
-"Recipient address %r not found. Allowing since the MTA was configured to "
-"accept the recipient."
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:890
-msgid "Invalid recipient"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:901
-msgid "Could not find this user, accepting"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:974
-#: ../bin/kolab_smtp_access_policy.py:1050
-#, python-format
-msgid "Sender %s is not allowed to send to recipient %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1038
-#, python-format
-msgid "Reproducing verify_sender(%r) from cache"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1055
-msgid "Unverifiable sender."
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1060
-msgid "Sender is not using an alias"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1068
-msgid "Sender uses unauthorized envelope sender address"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1085
-msgid "Could not verify sender"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1092
-msgid ""
-"Verifying whether sender is allowed to send to recipient using sender policy"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1105
-#, python-format
-msgid "Result is %r"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1110
-msgid "No recipient policy restrictions exist for this sender"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1119
-msgid "Found a recipient policy to apply for this sender."
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1134
-#, python-format
-msgid "Sender %s not allowed to send to recipient %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1155
-msgid "Cleaning up the cache"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1177
-msgid ""
-"The 'uri' setting in the kolab_smtp_access_policy section is soon going to "
-"be deprecated in favor of 'cache_uri'"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1193
-#, python-format
-msgid "Operational Error in caching: %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1245
-#, python-format
-msgid "Caching the policy result with timestamp %d"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1319
-#, python-format
-msgid "Returning action DEFER_IF_PERMIT: %s"
-msgstr ""
-
-#: ../bin/kolab_smtp_access_policy.py:1324
-#, python-format
-msgid "Returning action DUNNO: %s"
-msgstr ""

pykolab-0.7.0.tar.gz/po/stamp-it Deleted

pykolab-0.7.0.tar.gz/pykolab/plugins/roundcubedb Deleted

pykolab-0.7.0.tar.gz/pykolab/plugins/roundcubedb/__init__.py Deleted

@@ -1,69 +0,0 @@
-# -*- coding: utf-8 -*-
-# Copyright 2014 Kolab Systems AG (http://www.kolabsys.com)
-#
-# Thomas Bruederli (Kolab Systems) <bruederli(a)kolabsys.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 3 or, at your option, any later version
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Library General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-
-import os
-import pykolab
-import subprocess
-
-from pykolab.translate import _
-
-log = pykolab.getLogger('pykolab.plugins.roundcubedb')
-conf = pykolab.getConf()
-
-class KolabRoundcubedb(object):
-    """
-        Pykolab plugin to update Roundcube's database on Kolab users db changes
-    """
-
-    def __init__(self):
-        pass
-
-    def add_options(self, *args,  **kw):
-        pass
-
-    def user_delete(self, *args, **kw):
-        """
-            The arguments passed to the 'user_delete' hook:
-
-            user - full user entry from LDAP
-            domain - domain name
-        """
-
-        log.debug(_("user_delete: %r") % (kw), level=9)
-
-        if os.path.isdir('/usr/share/roundcubemail'):
-            rcpath = '/usr/share/roundcubemail/'
-        elif os.path.isdir('/usr/share/roundcube'):
-            rcpath = '/usr/share/roundcube/'
-        else:
-            log.error(_("Roundcube installation path not found."))
-            return False
-
-        result_attribute = conf.get('cyrus-sasl', 'result_attribute')
-
-        # execute Roundcube's bin/deluser.sh script to do the work
-        if kw.has_key('user') and kw['user'].has_key(result_attribute) and os.path.exists(rcpath + 'bin/deluser.sh'):
-            proc = subprocess.Popen([ 'sudo -u apache', rcpath + 'bin/deluser.sh', kw['user'][result_attribute] ], stderr=subprocess.PIPE, stdout=subprocess.PIPE)
-            procout, procerr = proc.communicate()
-            if proc.returncode != 0:
-                log.error(rcpath + "bin/deluser.sh exited with error %d: %r" % (proc.returncode, procerr))
-            else:
-                log.debug(rcpath + "bin/deluser.sh success: %r; %r" % (procout, procerr), level=9)
-
-        return None

pykolab-0.7.0.tar.gz/share/kolab2.schema Deleted

@@ -1,1098 +0,0 @@
-# $Id: kolab2.schema,v 1.38 2009/07/08 10:26:06 gunnar Exp $
-# (c) 2003, 2004 Tassilo Erlewein <tassilo.erlewein@erfrakon.de>
-# (c) 2003-2009  Martin Konold <martin.konold@erfrakon.de>
-# (c) 2003 Achim Frank <achim.frank@erfrakon.de>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# Redistributions of source code must retain the above copyright notice, this
-# list of conditions and the following disclaimer.
-#
-# Redistributions in binary form must reproduce the above copyright notice,
-# this list of conditions and the following disclaimer in the documentation
-# and/or other materials provided with the distribution.
-#
-# The name of the author may not be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# This schema highly depends on the core.schema, cosine.schema and the inetorgperson.schema
-# as provided by 3rd parties like OpenLDAP.
-#
-# slapd.conf then looks like
-# include /kolab/etc/openldap/schema/core.schema
-# include /kolab/etc/openldap/schema/cosine.schema
-# include /kolab/etc/openldap/schema/inetorgperson.schema
-# include /kolab/etc/openldap/schema/rfc2739.schema
-# include /kolab/etc/openldap/schema/kolab2.schema
-
-# Prefix for OIDs: 1.3.6.1.4.1.19414 <- registered
-# Prefix for OIDs: 1.3.6.1.4.1.19414.2000 <-- temporarily reserved for ob
-# Prefix for attributes: 1.3.6.1.4.1.19414.1
-# Prefix for attributes: 1.3.6.1.4.1.19414.2
-# Prefix for objectclasses: 1.3.6.1.4.1.19414.3
-# nameprefix: kolab
-#
-####################
-# kolab attributes #
-####################
-
-# helper attribute to make the kolab root easily findable in
-# a big ldap directory
-attributetype ( 1.3.6.1.4.1.19414.2.1.1
-  NAME ( 'k' 'kolab' )
-  DESC 'Kolab attribute'
-  SUP name )
-
-# kolabDeleteflag used to be a boolean but describes with Kolab 2
-# the fqdn of the server which is requested to delete this objects
-# in its local store
-attributetype ( 1.3.6.1.4.1.19414.2.1.2
-  NAME 'kolabDeleteflag'
-  DESC 'Per host deletion status'
-  EQUALITY caseIgnoreIA5Match
-  SUBSTR caseIgnoreIA5SubstringsMatch
-  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
-
-# alias used to provide alternative rfc822 email addresses for kolab users
-attributetype ( 1.3.6.1.4.1.19414.2.1.3
-  NAME 'alias'
-  DESC 'RFC1274: RFC822 Mailbox'
-  EQUALITY caseIgnoreIA5Match
-  SUBSTR caseIgnoreIA5SubstringsMatch
-  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
-
-# kolabEncryptedPassword is an asymmetrically (RSA) encrypted copy of the
-# cleartext password. This is required in order to pass the password from
-# the maintainance/administration application to the kolabHomeServer running the
-# resource handler application in a secure manner.
-# Actually this attribute is deprecated as of Kolab 2.1. Instead we grant the
-# calendar user dn: cn=calendar,cn=internal,dc=yourcompany,dc=com access to
-# the respective calendar folder using IMAP ACLs.
-attributetype ( 1.3.6.1.4.1.19414.2.1.4
-  NAME 'kolabEncryptedPassword'
-  DESC 'base64 encoded public key encrypted Password'
-  SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
-
-# hostname including the domain name like kolab-master.yourcompany.com
-attributetype ( 1.3.6.1.4.1.19414.2.1.5
-  NAME ( 'fqhostname' 'fqdnhostname' )
-  DESC 'Fully qualified Hostname including full domain component'
-  EQUALITY caseIgnoreIA5Match
-  SUBSTR caseIgnoreIA5SubstringsMatch
-  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
-
-# fqdn of all hosts in a multi-location or cluster setup
-attributetype ( 1.3.6.1.4.1.19414.2.1.6
-  NAME 'kolabHost'
-  DESC 'Multivalued -- list of hostnames in a Kolab setup'
-  EQUALITY caseIgnoreIA5Match
-  SUBSTR caseIgnoreIA5SubstringsMatch
-  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
-
-# fqdn of the server containg the actual user mailbox
-attributetype ( 1.3.6.1.4.1.19414.1.1.1.1
-  NAME 'kolabHomeServer'
-  DESC 'server which keeps the users mailbox'
-  EQUALITY caseIgnoreIA5Match
-  SUBSTR caseIgnoreIA5SubstringsMatch
-  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
-
-# flag for allowing unrestriced length of mails
-attributetype ( 1.3.6.1.4.1.19414.1.1.1.2
-  NAME 'unrestrictedMailSize'
-  EQUALITY booleanMatch
-  SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 )
-
-# Specifies the email delegates.
-# An email delegate can send email on behalf of the account
-# which means using the "from" of the account.
-# Delegates are specified by the syntax of rfc822 email addresses.
-attributetype ( 1.3.6.1.4.1.19414.1.1.1.3
-  NAME 'kolabDelegate'
-  DESC 'Kolab user allowed to act as delegates - RFC822 Mailbox/Alias'
-  EQUALITY caseIgnoreIA5Match
-  SUBSTR caseIgnoreIA5SubstringsMatch
-  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
-
-# For user, group and resource Kolab accounts
-# Describes how to respond to invitations
-# We keep the attribute as a string, but actually it can only have one
-# of the following values:
-#
-#  ACT_ALWAYS_ACCEPT
-#  ACT_ALWAYS_REJECT
-#  ACT_REJECT_IF_CONFLICTS
-#  ACT_MANUAL_IF_CONFLICTS
-#  ACT_MANUAL
-# In addition one of these values may be prefixed with a primary email
-# address followed by a colon like
-# user@domain.tld: ACT_ALWAYS_ACCEPT
-attributetype ( 1.3.6.1.4.1.19414.1.1.1.4
-  NAME ( 'kolabInvitationPolicy' 'kolabResourceAction' )
-  DESC 'defines how to respond to invitations'
-  EQUALITY caseIgnoreIA5Match
-  SUBSTR caseIgnoreIA5SubstringsMatch
-  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} )
-
-# time span from now to the future used for the free busy data
-# measured in days
-attributetype ( 1.3.6.1.4.1.19414.1.1.1.5
-  NAME 'kolabFreeBusyFuture'
-  DESC 'time in days for fb data towards the future'
-  EQUALITY integerMatch
-  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
-  SINGLE-VALUE )
-
-# time span from now to the past used for the free busy data
-# measured in days
-attributetype ( 1.3.6.1.4.1.19414.1.1.1.6
-  NAME 'kolabFreeBusyPast'
-  DESC 'time in days for fb data towards the past'
-  EQUALITY integerMatch
-  SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
-  SINGLE-VALUE )
-
-# fqdn of the server as the default SMTP MTA
-# not used in Kolab 2 currently as in Kolab 2 the
-# default MTA is equivalent to the kolabHomeServer
-attributetype ( 1.3.6.1.4.1.19414.1.1.1.7
-  NAME 'kolabHomeMTA'
-  DESC 'fqdn of default MTA'
-  EQUALITY caseIgnoreIA5Match
-  SUBSTR caseIgnoreIA5SubstringsMatch
-  SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256}
-  SINGLE-VALUE )
-
-# Begin date of Kolab vacation period. Sender will
-# be notified every kolabVacationResendIntervall days
-# that recipient is absent until kolabVacationEnd.
-# Values in this syntax are encoded as printable strings,
-# represented as specified in X.208.
-# Note that the time zone must be specified.
-# For Kolab we limit ourself to  GMT
-# YYYYMMDDHHMMZ e.g. 200512311458Z.
-# see also: rfc 2252.
-# Currently this attribute is not used in Kolab.
-attributetype ( 1.3.6.1.4.1.19414.1.1.1.8
-  NAME 'kolabVacationBeginDateTime'
-  DESC 'Begin date of vacation'
-  EQUALITY generalizedTimeMatch
-  SYNTAX 1.3.6.1.4.1.1466.115.121.1.24
-  SINGLE-VALUE )
-
-# End date of Kolab vacation period. Sender will
-# be notified every kolabVacationResendIntervall days
-# that recipient is absent starting from kolabVacationBeginDateTime.
-# Values in this syntax are encoded as printable strings,

pykolab-0.7.0.tar.gz/test-wallace.py Deleted

@@ -1,102 +0,0 @@
-#!/usr/bin/python
-#
-# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
-#
-# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-import smtplib
-import socket
-import sys
-
-# For development purposes
-sys.path.extend(['.', '..'])
-
-from email.MIMEMultipart import MIMEMultipart
-from email.MIMEBase import MIMEBase
-from email.MIMEText import MIMEText
-from email.Utils import COMMASPACE, formatdate
-from email import Encoders
-
-def send_mail(send_from, send_to, send_with=None):
-    smtp = smtplib.SMTP("localhost", 10026)
-    smtp.set_debuglevel(True)
-    subject = "This is a Kolab load test mail"
-    text = """Hi there,
-
-I am a Kolab Groupware test email, generated by a script that makes
-me send lots of email to lots of people using one account and a bunch
-of delegation blah.
-
-Your response, though completely unnecessary, would be appreciated, because
-being a fictitious character doesn't do my address book of friends any good.
-
-Kind regards,
-
-Lucy Meier.
-"""
-
-    msg = MIMEMultipart()
-    msg['From'] = send_from
-    msg['To'] = COMMASPACE.join(send_to)
-    msg['Date'] = formatdate(localtime=True)
-    msg['Subject'] = subject
-
-    msg.attach( MIMEText(text) )
-
-    #msg.attach( MIMEBase('application', open('/boot/initrd-plymouth.img').read()) )
-
-    smtp.sendmail(send_from, send_to, msg.as_string())
-
-if __name__ == "__main__":
-    #send_to = [
-            #'Jeroen van Meeuwen <jeroen.vanmeeuwen@klab.cc>',
-            #'Aleksander Machniak <aleksander.machniak@klab.cc>',
-            #'Georg Greve <georg.greve@klab.cc>',
-            #'Paul Adams <paul.adams@klab.cc>',
-            #'Thomas Broderli <thomas.broderli@klab.cc>',
-            #'Christoph Wickert <christoph.wickert@klab.cc>',
-            #'Lucy Meier <lucy.meier@klab.cc>',
-        #]
-
-
-    #send_mail(
-            #'Jeroen van Meeuwen <jeroen.vanmeeuwen@klab.cc>',
-            #send_to
-        #)
-
-    #send_mail(
-            #'Lucy Meier on behalf of Paul Adams <paul.adams@test90.kolabsys.com>',
-            #send_to
-        #)
-
-    #send_mail(
-            #'Lucy Meier on behalf of Georg Greve <georg.greve@test90.kolabsys.com>',
-            #send_to
-        #)
-
-    send_to = [
-            'Jeroen van Meeuwen (REJECT) <vanmeeuwen+reject@kolabsys.com>',
-            'Jeroen van Meeuwen (HOLD) <vanmeeuwen+hold@kolabsys.com>',
-            'Jeroen van Meeuwen (DEFER) <vanmeeuwen+defer@kolabsys.com>',
-            'Jeroen van Meeuwen (ACCEPT) <vanmeeuwen+accept@kolabsys.com>',
-            'Jeroen "kanarip" van Meeuwen (ACCEPT) <kanarip+accept@kolabsys.com>',
-            'Jeroen "kanarip" van Meeuwen (REJECT) <kanarip+reject@kolabsys.com>',
-            'Lucy Meier (REJECT) <meier+reject@kolabsys.com>',
-            'Georg Greve (REJECT) <greve+reject@kolabsys.com>',
-        ]
-
-    send_mail('Jeroen van Meeuwen <vanmeeuwen@kolabsys.com>', send_to)

pykolab-0.7.0.tar.gz/ucs/kolab_sieve.py Deleted

@@ -1,159 +0,0 @@
-#!/usr/bin/python
-#
-# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
-#
-# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-# workaround for PEP 366
-__package__ = ''
-
-import listener
-import logging
-import os
-import sys
-import univention_baseconfig
-import univention.debug as ulog
-
-sys.path = [
-        os.path.abspath(
-                os.path.join(
-                        os.path.dirname(
-                                os.path.realpath(os.path.abspath(__file__))
-                            ),
-                        '..'
-                    )
-            ) ] + sys.path
-
-sys.stderr = open('/dev/null', 'a')
-
-name = 'kolab_sieve'
-description = "Sieve Script Management for Kolab Groupware on UCS"
-
-# The filter has to be composed to make sure only Kolab Groupware
-# related objects are passed along to this listener module.
-filter = '(objectClass=kolabInetOrgPerson)'
-#attributes = [ '*' ]
-
-import pykolab
-from pykolab import constants
-from pykolab import utils
-
-log = pykolab.getLogger('pykolab.listener')
-log.remove_stdout_handler()
-log.setLevel(logging.DEBUG)
-log.debuglevel = 9
-
-conf = pykolab.getConf()
-conf.finalize_conf(fatal=False)
-conf.debuglevel = 9
-
-from pykolab.auth import Auth
-
-def handler(*args, **kw):
-    auth = Auth()
-    auth.connect()
-
-    if len(args) == 4:
-        # moddn, not relevant for Sieve Script Management
-        pass
-
-    elif len(args) == 3:
-        dn = args[0]
-        new = utils.normalize(args[1])
-        old = utils.normalize(args[2])
-
-        if isinstance(old, dict) and len(old.keys()) > 0:
-            # Either the entry changed or was deleted
-
-            if isinstance(new, dict) and len(new.keys()) > 0:
-                # The entry was modified.
-
-                result_attr = conf.get('cyrus-sasl', 'result_attribute')
-
-                if not new.has_key(result_attr):
-                    log.error(
-                            "Entry %r does not have attribute %r" % (
-                                    dn,
-                                    result_attr
-                                )
-                        )
-
-                    return
-
-                # See if the mailserver_attribute exists
-                mailserver_attribute = conf.get('ldap', 'mailserver_attribute').lower()
-
-                if mailserver_attribute == None:
-                    log.error("Mail server attribute is not set")
-                    # TODO: Perhaps, query for IMAP servers. If there is only one,
-                    #       we know what to do.
-                    return
-
-                if new.has_key(mailserver_attribute):
-                    if not new[mailserver_attribute] == constants.fqdn:
-                        log.info(
-                                "The mail server for user %r is set, and it is not me (%r)" % (
-                                        dn,
-                                        new[mailserver_attribute]
-                                    )
-                            )
-
-                        return
-                else:
-                    log.error("Entry %r does not have a mail server set" % (dn))
-                    return
-
-                conf.plugins.exec_hook(
-                        'sieve_mgmt_refresh',
-                        kw = {
-                                'user': new[result_attr]
-                            }
-                    )
-
-            else:
-                # The entry was deleted. This is irrelevant for
-                # Sieve Script Management
-                return
-
-        elif isinstance(new, dict) and len(new.keys()) > 0:
-            # Old is not a dict (or empty), so the entry is just created
-
-            # See if the mailserver_attribute exists
-            mailserver_attribute = conf.get('ldap', 'mailserver_attribute').lower()
-            result_attr = conf.get('cyrus-sasl', 'result_attribute').lower()
-
-            if mailserver_attribute == None:
-                log.error("Mail server attribute is not set")
-                # TODO: Perhaps, query for IMAP servers. If there is only one,
-                #       we know what to do.
-                return
-
-            if new.has_key(mailserver_attribute):
-                if not new[mailserver_attribute] == constants.fqdn:
-                    log.info("The mail server for user %r is set, and it is not me (%r)" % (dn, new[mailserver_attribute]))
-                    return
-
-                conf.plugins.exec_hook(
-                        'sieve_mgmt_refresh',
-                        kw = {
-                                'user': new[result_attr]
-                            }
-                    )
-
-        else:
-            log.info("entry %r changed, but no new or old attributes" % (dn))
-

pykolab-0.7.1.tar.gz/ChangeLog Added

@@ -0,0 +1,9107 @@
+commit 5a9852f6358f6f37f1b13545ecd366880de492bd
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Tue Aug 19 22:53:32 2014 +0200
+
+    Bump version
+
+commit 1da7b81cebf9bb2fd9485e5af3f59ede9a31b4c0
+Author: Timotheus Pokorra (TBits.net) <tp@tbits.net>
+Date:   Tue Aug 19 15:11:29 2014 +0200
+
+    Bug #2491: sleep time until new domains are created should be optionally set in configuration file
+
+commit ee82a914da00c1f0133240abc4767ac01f4c27ea
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Tue Aug 19 14:02:30 2014 +0200
+
+    Bug #3156 - wrong sender_login_maps
+
+commit ff5031a3d8f1b30857628b670da1758d345be530
+Author: Aeneas Jaißle <aj@ajaissle.de>
+Date:   Tue Aug 19 13:52:46 2014 +0200
+
+    Fix #3391: setup-kolab syncroton fails on openSUSE. The setup script tries an os.walk to find msql.initial.sql, but has a 'break' stopping the walk from going one (needed) level deeper.
+
+commit 36ef0b35a936cc49e490d132d88922968c1eb471
+Author: Thomas Bruederli <bruederli@kolabsys.com>
+Date:   Tue Aug 19 11:57:34 2014 -0400
+
+    Set read ACLs for admin user before accessing resource calendars (#3428)
+
+commit c8560954615b94e21b7605a1e095481c6a022721
+Author: Thomas Bruederli <bruederli@kolabsys.com>
+Date:   Fri Aug 15 18:08:36 2014 -0400
+
+    Catch failures on base64 decoding event UIDs from owner confirmation replies (#3423)
+
+commit adf90b45b28b458931ff69fb77caebe3c868d84b
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Tue Aug 19 13:46:41 2014 +0200
+
+    Work around fsockopen() taking OpenSSL's default cert validation routines (#3332)
+
+commit fff8fd1189e52eab6e42cda1885cc782969d6a61
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Tue Aug 19 13:39:15 2014 +0200
+
+    Add kolab_smtp_access_policy/cache_uri setting to set
+
+commit decbb7d37719074d1c63dd26fd1120c9646e7549
+Author: Daniel Hoffend <dh@dotlan.net>
+Date:   Tue Aug 19 13:28:43 2014 +0200
+
+    fix splitting of imap acl/aci from ldap entry (#3351)
+
+commit ef398699e6a041e718dfec2d67702edd45135e64
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Tue Aug 19 13:22:55 2014 +0200
+
+    Drop patches from packaging (#3374)
+
+commit 27f4d069f721b254c5db7249bd792d0fec52fc40
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Tue Aug 19 13:18:45 2014 +0200
+
+    Fix #3350, _acl referenced before assignment
+
+commit a46c3d3a34c2cf9264566c29a429bd8a1d3aec6c
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Tue Aug 19 13:16:26 2014 +0200
+
+    Fix #3349 by testing if a log file already exists
+
+commit af9c30d69a2e0f6e428d239359c4bb4be7ab8595
+Author: Daniel Hoffend <dh@dotlan.net>
+Date:   Tue Aug 19 13:12:50 2014 +0200
+
+    virtualaliasmaps only for sharedfolders of kolabFolderType=mail (#3311)
+
+commit f179b42eb66d1f436f63c118f46d26eed33dc9ca
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Tue Aug 19 13:06:53 2014 +0200
+
+    %mail -> %s
+
+commit 6540816847dab0c14a42644f08de063520a74966
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Tue Aug 19 12:29:11 2014 +0200
+
+    Add default settings for group ACLs
+
+commit 129472ff828b3d1789c60eaecd2b90acdeb9baf5
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Tue Aug 19 11:55:26 2014 +0200
+
+    Fix #3418 and add new default folders
+
+commit ec2dc345c803ed50dfd81c497ba85b8ed45b31c9
+Author: Aeneas Jaißle <aj@ajaissle.de>
+Date:   Tue Aug 19 11:36:11 2014 +0200
+
+    Add /etc/amavisd.conf as possible amavisd configuration file
+
+commit f40f94e60cdb3b07c76408acf9d64f680a0b82ab
+Author: Aeneas Jaißle <aj@ajaissle.de>
+Date:   Tue Aug 19 11:35:02 2014 +0200
+
+    This patch adds an option '--socket' that can be used when starting kolab-saslauthd, to specify the socket file to bind to.
+
+commit b7448315c76685b66a74368aa6bbfd70c5d7b531
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Tue Aug 19 10:50:57 2014 +0200
+
+    Allow a URI to be passed on to connect()
+
+commit 2c3a0384bd5fca829a1e7b2b0de3dcb209169052
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Tue Aug 19 10:50:25 2014 +0200
+
+    clamd.amavisd is actually clamd@amavisd
+
+commit c5e8514c602be65eec3bec91ab16ffddf15c9148
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Thu Aug 14 15:35:46 2014 +0200
+
+    Improve the defaults for iTip sending on behalf of users not logged in.
+
+commit a526ac76f0269c4c8216d308f9d616d74a123a27
+Author: Timotheus Pokorra (TBits.net) <tp@tbits.net>
+Date:   Thu Aug 14 14:51:09 2014 +0200
+
+    killproc -p $pidfile to only kill the master thread (#917)
+
+commit b006de19c34ef3678d30fa67c88baf5ce300f733
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Thu Aug 14 14:47:05 2014 +0200
+
+    Correct the folder path at the earliest opportunity to avoid mis-firing set acl commands (#3315)
+
+commit 7edf06594b70b6fc203e01341b573a07e65875cf
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Thu Aug 14 14:30:35 2014 +0200
+
+    Set version to 0.7.0
+
+commit b5f2d9e385cda35c9cb8b068c25d4d330de52ec7
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Thu Aug 14 14:02:13 2014 +0200
+
+    Only break when an actual schema file has been found
+
+commit aa266861ccbffb4ab5f9176d4d46b569771c992a
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Thu Aug 14 13:44:38 2014 +0200
+
+    Enable wallace by default
+
+commit b35567b8e2c24c69f56eb59b986e3f4f6c04be12
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Thu Aug 14 13:38:57 2014 +0200
+
+    kolab-users -> kolab-people
+
+commit a7c5e671b0531ac2ea390ebc0f1f604218d62718
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Thu Aug 14 13:23:26 2014 +0200
+
+    Use ldap_simple as the default password driver
+
+commit 6e91426d541921efd39c7cc12a8372848c312ed4
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Thu Aug 14 11:17:30 2014 +0200
+
+    Reflect the appropriate defaults for the Kolab Free/Busy web service
+
+commit 262f1b2b2fb3831707dbb3f5948736a6c5ca5d3f
+Author: Thomas Bruederli <bruederli@kolabsys.com>
+Date:   Thu Aug 14 03:14:38 2014 -0400
+
+    Fix traceback errors in resource booking module (#3312)
+
+commit 3cc6d87fb7ac57322e4e8b7d0321f280a49344cc
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Wed Aug 13 16:29:50 2014 +0200
+
+    Supply the default configuration for sharedfolder_acl_entry_attribute
+
+commit b52a188db9dbc7ed4d8d04a92d66c86e61f9dcfa
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Wed Aug 13 16:28:46 2014 +0200
+
+    Use the correct (actually configured) acl entry attribute for shared folders
+
+commit eeb52be1e300509cb1129e6951e7451cd441957c
+Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>
+Date:   Wed Aug 13 16:28:26 2014 +0200
+
+    Do not fail as miserably if setting an ACL fails
+
+commit 3bf16dfc05fcad3cb01bf0a3b21611db4839e8ce

pykolab-0.7.1.tar.gz/Makefile.in Added

@@ -0,0 +1,975 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = .
+DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
+	$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/configure $(am__configure_deps) \
+	$(top_srcdir)/bin/rebuild.sh.in $(srcdir)/pykolab.spec.in \
+	COPYING TODO install-sh missing py-compile
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES = bin/rebuild.sh pykolab.spec
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^$[^/]*$/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/$[^/]*$$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+ALL_LINGUAS = @ALL_LINGUAS@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CATALOGS = @CATALOGS@

pykolab-0.7.1.tar.gz/TODO Added

pykolab-0.7.1.tar.gz/aclocal.m4 Added

@@ -0,0 +1,1994 @@
+# generated automatically by aclocal 1.13.4 -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# Copyright (C) 1995-2002 Free Software Foundation, Inc.
+# Copyright (C) 2001-2003,2004 Red Hat, Inc.
+#
+# This file is free software, distributed under the terms of the GNU
+# General Public License.  As a special exception to the GNU General
+# Public License, this file may be distributed as part of a program
+# that contains a configuration script generated by Autoconf, under
+# the same distribution terms as the rest of that program.
+#
+# This file can be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+#
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper@cygnus.com>, 1995, 1996
+#
+# Modified to never use included libintl. 
+# Owen Taylor <otaylor@redhat.com>, 12/15/1998
+#
+# Major rework to remove unused code
+# Owen Taylor <otaylor@redhat.com>, 12/11/2002
+#
+# Added better handling of ALL_LINGUAS from GNU gettext version 
+# written by Bruno Haible, Owen Taylor <otaylor.redhat.com> 5/30/3002
+#
+# Modified to require ngettext
+# Matthias Clasen <mclasen@redhat.com> 08/06/2004
+#
+# We need this here as well, since someone might use autoconf-2.5x
+# to configure GLib then an older version to configure a package
+# using AM_GLIB_GNU_GETTEXT
+AC_PREREQ(2.53)
+
+dnl
+dnl We go to great lengths to make sure that aclocal won't 
+dnl try to pull in the installed version of these macros
+dnl when running aclocal in the glib directory.
+dnl
+m4_copy([AC_DEFUN],[glib_DEFUN])
+m4_copy([AC_REQUIRE],[glib_REQUIRE])
+dnl
+dnl At the end, if we're not within glib, we'll define the public
+dnl definitions in terms of our private definitions.
+dnl
+
+# GLIB_LC_MESSAGES
+#--------------------
+glib_DEFUN([GLIB_LC_MESSAGES],
+  [AC_CHECK_HEADERS([locale.h])
+    if test $ac_cv_header_locale_h = yes; then
+    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+    if test $am_cv_val_LC_MESSAGES = yes; then
+      AC_DEFINE(HAVE_LC_MESSAGES, 1,
+        [Define if your <locale.h> file defines LC_MESSAGES.])
+    fi
+  fi])
+
+# GLIB_PATH_PROG_WITH_TEST
+#----------------------------
+dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+glib_DEFUN([GLIB_PATH_PROG_WITH_TEST],
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+  /*)
+  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in ifelse([$5], , $PATH, [$5]); do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if [$3]; then
+	ac_cv_path_$1="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+  ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+  AC_MSG_RESULT([$]$1)
+else
+  AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
+# GLIB_WITH_NLS
+#-----------------
+glib_DEFUN([GLIB_WITH_NLS],
+  dnl NLS is obligatory
+  [USE_NLS=yes
+    AC_SUBST(USE_NLS)
+
+    gt_cv_have_gettext=no
+
+    CATOBJEXT=NONE
+    XGETTEXT=:
+    INTLLIBS=
+
+    AC_CHECK_HEADER(libintl.h,
+     [gt_cv_func_dgettext_libintl="no"
+      libintl_extra_libs=""
+
+      #
+      # First check in libc
+      #
+      AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc,
+        [AC_TRY_LINK([
+#include <libintl.h>
+],
+         [return !ngettext ("","", 1)],
+	  gt_cv_func_ngettext_libc=yes,
+          gt_cv_func_ngettext_libc=no)
+        ])
+  
+      if test "$gt_cv_func_ngettext_libc" = "yes" ; then
+	      AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc,
+        	[AC_TRY_LINK([
+#include <libintl.h>
+],
+	          [return !dgettext ("","")],
+		  gt_cv_func_dgettext_libc=yes,
+	          gt_cv_func_dgettext_libc=no)
+        	])
+      fi
+  
+      if test "$gt_cv_func_ngettext_libc" = "yes" ; then
+        AC_CHECK_FUNCS(bind_textdomain_codeset)
+      fi
+
+      #
+      # If we don't have everything we want, check in libintl
+      #
+      if test "$gt_cv_func_dgettext_libc" != "yes" \
+	 || test "$gt_cv_func_ngettext_libc" != "yes" \
+         || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then
+        
+        AC_CHECK_LIB(intl, bindtextdomain,
+	    [AC_CHECK_LIB(intl, ngettext,
+		    [AC_CHECK_LIB(intl, dgettext,
+			          gt_cv_func_dgettext_libintl=yes)])])
+
+	if test "$gt_cv_func_dgettext_libintl" != "yes" ; then
+	  AC_MSG_CHECKING([if -liconv is needed to use gettext])
+	  AC_MSG_RESULT([])
+  	  AC_CHECK_LIB(intl, ngettext,
+          	[AC_CHECK_LIB(intl, dcgettext,
+		       [gt_cv_func_dgettext_libintl=yes
+			libintl_extra_libs=-liconv],
+			:,-liconv)],
+		:,-liconv)
+        fi
+
+        #
+        # If we found libintl, then check in it for bind_textdomain_codeset();
+        # we'll prefer libc if neither have bind_textdomain_codeset(),
+        # and both have dgettext and ngettext
+        #
+        if test "$gt_cv_func_dgettext_libintl" = "yes" ; then
+          glib_save_LIBS="$LIBS"
+          LIBS="$LIBS -lintl $libintl_extra_libs"
+          unset ac_cv_func_bind_textdomain_codeset
+          AC_CHECK_FUNCS(bind_textdomain_codeset)
+          LIBS="$glib_save_LIBS"

pykolab-0.7.1.tar.gz/conf/Makefile.in Added

@@ -0,0 +1,485 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = conf
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(confdir)"
+DATA = $(conf_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALL_LINGUAS = @ALL_LINGUAS@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DATESTAMP = @DATESTAMP@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLLIBS = @INTLLIBS@
+INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
+INTLTOOL_MERGE = @INTLTOOL_MERGE@
+INTLTOOL_PERL = @INTLTOOL_PERL@
+INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
+INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
+INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
+INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
+INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MSGFMT_OPTS = @MSGFMT_OPTS@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@

pykolab-0.7.0.tar.gz/conf/kolab.conf -> pykolab-0.7.1.tar.gz/conf/kolab.conf Changed

pykolab-0.7.1.tar.gz/configure Added

@@ -0,0 +1,7071 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for pykolab 0.7.1.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\$.*\$"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\$.*\$$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\$.*\$"`;;
+      esac;
+      expr "X$arg" : "X\$.*\$" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"

pykolab-0.7.0.tar.gz/configure.ac -> pykolab-0.7.1.tar.gz/configure.ac Changed

pykolab-0.7.1.tar.gz/kolabd/Makefile.in Added

@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = kolabd
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(kolabd_PYTHON) $(top_srcdir)/py-compile
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__py_compile = PYTHON=$(PYTHON) $(SHELL) $(py_compile)
+am__installdirs = "$(DESTDIR)$(kolabddir)"
+am__pep3147_tweak = \
+  sed -e 's|\.py$$||' -e 's|[^/]*$$|__pycache__/&.*.py|'
+py_compile = $(top_srcdir)/py-compile
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALL_LINGUAS = @ALL_LINGUAS@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DATESTAMP = @DATESTAMP@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLLIBS = @INTLLIBS@
+INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
+INTLTOOL_MERGE = @INTLTOOL_MERGE@
+INTLTOOL_PERL = @INTLTOOL_PERL@
+INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
+INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
+INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
+INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
+INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MSGFMT_OPTS = @MSGFMT_OPTS@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

pykolab-0.7.0.tar.gz/kolabd/__init__.py -> pykolab-0.7.1.tar.gz/kolabd/__init__.py Changed

pykolab-0.7.1.tar.gz/pykolab.spec Added

@@ -0,0 +1,405 @@
+%{!?python_sitelib: %define python_sitelib %(python -c "from distutils.sysconfig import get_python_lib; print get_python_lib()")}
+
+%global kolab_user kolab
+%global kolab_user_id 412
+%global kolab_group kolab
+%global kolab_group_id 412
+
+%global kolabn_user kolab-n
+%global kolabn_user_id 413
+%global kolabn_group kolab-n
+%global kolabn_group_id 413
+
+%global kolabr_user kolab-r
+%global kolabr_user_id 414
+%global kolabr_group kolab-r
+%global kolabr_group_id 414
+
+Summary:            Kolab Groupware Solution
+Name:               pykolab
+Version:            0.7.1
+Release:            1%{?dist}
+License:            GPLv3+
+Group:              Applications/System
+URL:                http://kolab.org/
+Source0:            http://files.kolab.org/releases/%{name}-%{version}.tar.gz
+BuildRoot:          %{_tmppath}/%{name}-%{version}-%{release}-root
+BuildArch:          noarch
+BuildRequires:      gcc
+BuildRequires:      gettext
+BuildRequires:      glib2-devel
+BuildRequires:      intltool
+BuildRequires:      python
+BuildRequires:      python-icalendar
+BuildRequires:      python-kolabformat
+BuildRequires:      python-ldap
+BuildRequires:      python-nose
+BuildRequires:      python-pyasn1
+BuildRequires:      python-pyasn1-modules
+BuildRequires:      python-sqlalchemy
+Requires:           kolab-cli = %{version}-%{release}
+Requires:           python-ldap >= 2.4
+Requires:           python-pyasn1
+Requires:           python-pyasn1-modules
+Requires:           python-sqlalchemy
+Requires(pre):      /usr/sbin/useradd
+Requires(pre):      /usr/sbin/usermod
+Requires(pre):      /usr/sbin/groupadd
+
+%description
+Kolab enables you to easily build a groupware server as part of a
+collaborative environment.
+
+##
+## Kolab Telemetry Logging
+##
+%package telemetry
+Summary:            Kolab Telemetry Logging Capabilities
+Group:              Applications/System
+Requires:           kolab-cli = %{version}-%{release}
+
+%description telemetry
+Cyrus IMAP Telemetry logging handling capabilities for Kolab Groupware
+
+##
+## Kolab XML
+##
+%package xml
+Summary:            Kolab XML format wrapper for %{name}
+Group:              Applications/System
+Requires:           %{name} = %{version}-%{release}
+Requires:           python-kolabformat >= 0.5
+
+%description xml
+Kolab Format XML bindings wrapper for %{name}
+
+##
+## Kolab CLI
+##
+%package -n kolab-cli
+Summary:            Kolab CLI components
+Group:              Applications/System
+Requires:           %{name} = %{version}-%{release}
+Requires:           python-augeas
+Requires:           python-cheetah
+
+%description -n kolab-cli
+Kolab CLI utilities
+
+##
+## Kolab SASL Authentication Daemon
+##
+%package -n kolab-saslauthd
+Summary:            Kolab SASL Authentication Daemon
+Group:              Applications/System
+Requires:           %{name} = %{version}-%{release}
+Requires:           cyrus-sasl
+Requires:           cyrus-sasl-plain
+
+%description -n kolab-saslauthd
+Kolab SASL Authentication Daemon for multi-domain, multi-authn database deployments
+
+##
+## Kolab Server implemented in Python
+##
+%package -n kolab-server
+Summary:            Kolab Server implemented in Python
+Group:              Applications/System
+Requires:           %{name} = %{version}-%{release}
+
+%description -n kolab-server
+Kolab Server implemented in Python
+
+##
+## Kolab SMTP Access Policy for Postfix
+##
+%package -n postfix-kolab
+Summary:            Kolab SMTP Access Policy for Postfix
+Group:              Applications/System
+Requires:           postfix
+Requires:           %{name} = %{version}-%{release}
+Requires:           python-sqlalchemy
+Requires:           MySQL-python
+
+%description -n postfix-kolab
+Kolab SMTP Access Policy for Postfix
+
+##
+## Wallace
+##
+%package -n wallace
+Summary:            Kolab Content-Filter
+Group:              Applications/System
+Requires:           %{name} = %{version}-%{release}
+Requires:           python-sqlalchemy
+Requires:           MySQL-python
+Requires:           python-icalendar >= 3.0
+Requires:           %{name}-xml = %{version}-%{release}
+
+%description -n wallace
+This is the Kolab Content Filter, with plugins
+
+%prep
+%setup -q
+
+%build
+%configure
+
+%install
+rm -rf %{buildroot}
+make install DESTDIR=%{buildroot}
+
+%if 0%{?fedora} >= 15
+mkdir -p %{buildroot}/%{_unitdir}
+%{__install} -p -m 644 kolabd/kolabd.systemd %{buildroot}/%{_unitdir}/kolabd.service
+%{__install} -p -m 644 saslauthd/kolab-saslauthd.systemd %{buildroot}/%{_unitdir}/kolab-saslauthd.service
+%{__install} -p -m 644 wallace/wallace.systemd %{buildroot}/%{_unitdir}/wallace.service
+mkdir -p %{buildroot}/%{_sysconfdir}/tmpfiles.d/
+%{__install} -p -m 644 kolabd/kolabd.tmpfiles.d.conf %{buildroot}/%{_sysconfdir}/tmpfiles.d/kolabd.conf
+%{__install} -p -m 644 wallace/wallace.tmpfiles.d.conf %{buildroot}/%{_sysconfdir}/tmpfiles.d/wallace.conf
+%else
+mkdir -p %{buildroot}/%{_initddir}
+%{__install} -p -m 755 kolabd/kolabd.sysvinit %{buildroot}/%{_initrddir}/kolabd
+%{__install} -p -m 755 saslauthd/kolab-saslauthd.sysvinit %{buildroot}/%{_initrddir}/kolab-saslauthd
+%{__install} -p -m 755 wallace/wallace.sysvinit %{buildroot}/%{_initrddir}/wallace
+%endif
+
+mkdir -p %{buildroot}/%{_sysconfdir}/sysconfig
+%{__install} -p -m 644 kolabd/kolabd.sysconfig %{buildroot}/%{_sysconfdir}/sysconfig/kolabd
+%{__install} -p -m 644 saslauthd/kolab-saslauthd.sysconfig %{buildroot}/%{_sysconfdir}/sysconfig/kolab-saslauthd
+%{__install} -p -m 644 wallace/wallace.sysconfig %{buildroot}/%{_sysconfdir}/sysconfig/wallace
+
+%find_lang pykolab
+
+%pre
+# Add the kolab user and group accounts
+getent group %{kolab_group} &>/dev/null || groupadd -r %{kolab_group} -g %{kolab_group_id} &>/dev/null
+getent passwd %{kolab_user} &>/dev/null || \
+    useradd -r -u %{kolab_user_id} -g %{kolab_group} -d %{_localstatedir}/lib/%{kolab_user} -s /sbin/nologin \
+        -c "Kolab System Account" %{kolab_user} &>/dev/null || :
+
+gpasswd -a apache kolab >/dev/null 2>&1 || :
+
+getent group %{kolabn_group} &>/dev/null || groupadd -r %{kolabn_group} -g %{kolabn_group_id} &>/dev/null
+getent passwd %{kolabn_user} &>/dev/null || \
+    useradd -r -u %{kolabn_user_id} -g %{kolabn_group} -d %{_localstatedir}/lib/%{kolabn_user} -s /sbin/nologin \
+        -c "Kolab System Account (N)" %{kolabn_user} &>/dev/null || :
+    gpasswd -a %{kolabn_user} %{kolab_group} &>/dev/null || :
+
+getent group %{kolabr_group} &>/dev/null || groupadd -r %{kolabr_group} -g %{kolabr_group_id} &>/dev/null
+getent passwd %{kolabr_user} &>/dev/null || \
+    useradd -r -u %{kolabr_user_id} -g %{kolabr_group} -d %{_localstatedir}/lib/%{kolabr_user} -s /sbin/nologin \
+        -c "Kolab System Account (R)" %{kolabr_user} &>/dev/null || :
+
+# Make sure the kolab user and group is added
+getent passwd %{cyrus_admin} &>/dev/null || \
+    useradd -r -d %{_localstatedir}/lib/%{cyrus_admin} -s /sbin/nologin \
+        -c "Kolab Cyrus Administrator Account" %{cyrus_admin} &>/dev/null || :
+
+# Make sure our user has the correct home directory

pykolab-0.7.1.tar.gz/pykolab/Makefile.in Added

@@ -0,0 +1,1487 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+@ENTERPRISE_TRUE@am__append_1 = conf/entitlement.py
+subdir = pykolab
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(srcdir)/constants.py.in $(pykolab_PYTHON) \
+	$(pykolab_auth_PYTHON) $(pykolab_auth_ldap_PYTHON) \
+	$(pykolab_cli_PYTHON) $(pykolab_clisieve_PYTHON) \
+	$(pykolab_clitelemetry_PYTHON) $(pykolab_cliwap_PYTHON) \
+	$(am__pykolab_conf_PYTHON_DIST) $(pykolab_imap_PYTHON) \
+	$(pykolab_itip_PYTHON) $(pykolab_plugins_PYTHON) \
+	$(pykolab_plugins_defaultfolders_PYTHON) \
+	$(pykolab_plugins_dynamicquota_PYTHON) \
+	$(pykolab_plugins_recipientpolicy_PYTHON) \
+	$(pykolab_plugins_sievemgmt_PYTHON) $(pykolab_setup_PYTHON) \
+	$(pykolab_wapclient_PYTHON) $(pykolab_xml_PYTHON) \
+	$(top_srcdir)/py-compile
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES = constants.py
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__py_compile = PYTHON=$(PYTHON) $(SHELL) $(py_compile)
+am__installdirs = "$(DESTDIR)$(pykolabdir)" \
+	"$(DESTDIR)$(pykolab_authdir)" \
+	"$(DESTDIR)$(pykolab_auth_ldapdir)" \
+	"$(DESTDIR)$(pykolab_clidir)" \
+	"$(DESTDIR)$(pykolab_clisievedir)" \
+	"$(DESTDIR)$(pykolab_clitelemetrydir)" \
+	"$(DESTDIR)$(pykolab_cliwapdir)" \
+	"$(DESTDIR)$(pykolab_confdir)" "$(DESTDIR)$(pykolab_imapdir)" \
+	"$(DESTDIR)$(pykolab_itipdir)" \
+	"$(DESTDIR)$(pykolab_pluginsdir)" \
+	"$(DESTDIR)$(pykolab_plugins_defaultfoldersdir)" \
+	"$(DESTDIR)$(pykolab_plugins_dynamicquotadir)" \
+	"$(DESTDIR)$(pykolab_plugins_recipientpolicydir)" \
+	"$(DESTDIR)$(pykolab_plugins_sievemgmtdir)" \
+	"$(DESTDIR)$(pykolab_setupdir)" \
+	"$(DESTDIR)$(pykolab_wapclientdir)" \
+	"$(DESTDIR)$(pykolab_xmldir)"
+am__pep3147_tweak = \
+  sed -e 's|\.py$$||' -e 's|[^/]*$$|__pycache__/&.*.py|'
+am__pykolab_conf_PYTHON_DIST = conf/defaults.py conf/__init__.py \
+	conf/entitlement.py
+py_compile = $(top_srcdir)/py-compile
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALL_LINGUAS = @ALL_LINGUAS@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DATESTAMP = @DATESTAMP@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+GREP = @GREP@

pykolab-0.7.0.tar.gz/pykolab/auth/ldap/__init__.py -> pykolab-0.7.1.tar.gz/pykolab/auth/ldap/__init__.py Changed

@@ -1214,6 +1214,9 @@
             else:
                 folder_path = entry['cn']
 
+        if not folder_path.startswith('shared/'):
+            folder_path = "shared/%s" % folder_path
+
         folderacl_entry_attribute = self.config_get('sharedfolder_acl_entry_attribute')
         if folderacl_entry_attribute == None:
             folderacl_entry_attribute = 'acl'
@@ -1232,7 +1235,7 @@
 
             for acl_entry in entry[folderacl_entry_attribute]:
                 acl_access = acl_entry.split()[-1]
-                aci_subject = ' '.join(acl_entry.split()[:-1])
+                aci_subject = ', '.join(acl_entry.split(', ')[:-1])
 
                 log.debug(_("Found a subject %r with access %r") % (aci_subject, acl_access), level=8)
 
@@ -1257,6 +1260,7 @@
 
         if not self.imap.shared_folder_exists(folder_path):
             self.imap.shared_folder_create(folder_path, server)
+            self.imap.set_acl(folder_path, 'anyone', '')
 
         if entry.has_key('kolabfoldertype') and \
                 not entry['kolabfoldertype'] == None:
@@ -1272,8 +1276,6 @@
             self.imap._set_kolab_mailfolder_acls(
                     entry['kolabfolderaclentry']
                 )
-        else:
-            self.imap.set_acl(folder_path, 'anyone', '')
 
         if entry.has_key(delivery_address_attribute) and \
                 not entry[delivery_address_attribute] == None:
@@ -1593,6 +1595,9 @@
             else:
                 folder_path = entry['cn']
 
+        if not folder_path.startswith('shared/'):
+            folder_path = "shared/%s" % folder_path
+
         folderacl_entry_attribute = self.config_get('sharedfolder_acl_entry_attribute')
         if folderacl_entry_attribute == None:
             folderacl_entry_attribute = 'acl'
@@ -1611,7 +1616,7 @@
 
             for acl_entry in entry[folderacl_entry_attribute]:
                 acl_access = acl_entry.split()[-1]
-                aci_subject = ' '.join(acl_entry.split()[:-1])
+                aci_subject = ', '.join(acl_entry.split(', ')[:-1])
 
                 log.debug(_("Found a subject %r with access %r") % (aci_subject, acl_access), level=8)
 
@@ -1636,6 +1641,7 @@
 
         if not self.imap.shared_folder_exists(folder_path):
             self.imap.shared_folder_create(folder_path, server)
+            self.imap.set_acl(folder_path, 'anyone', '')
 
         if entry.has_key('kolabfoldertype') and \
                 not entry['kolabfoldertype'] == None:
@@ -1644,8 +1650,6 @@
                     folder_path,
                     entry['kolabfoldertype']
                 )
-        else:
-            self.imap.set_acl(folder_path, 'anyone', '')
 
         if entry.has_key('kolabfolderaclentry') and \
                 not entry['kolabfolderaclentry'] == None:
@@ -1653,8 +1657,6 @@
             self.imap._set_kolab_mailfolder_acls(
                     entry['kolabfolderaclentry']
                 )
-        else:
-            self.imap.set_acl(folder_path, 'anyone', '')
 
         if entry.has_key(delivery_address_attribute) and \
                 not entry[delivery_address_attribute] == None:
@@ -1802,6 +1804,9 @@
             else:
                 folder_path = entry['cn']
 
+        if not folder_path.startswith('shared/'):
+            folder_path = "shared/%s" % folder_path
+
         if not self.imap.shared_folder_exists(folder_path):
             self.imap.shared_folder_create(folder_path, server)

pykolab-0.7.1.tar.gz/pykolab/cli/cmd_examine_message.py Added

@@ -0,0 +1,73 @@
+# -*- coding: utf-8 -*-
+# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
+#
+# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 3 or, at your option, any later version
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+
+import sys
+
+import commands
+
+import pykolab
+
+from pykolab import imap_utf7
+from pykolab.imap import IMAP
+from pykolab.translate import _
+
+log = pykolab.getLogger('pykolab.cli')
+conf = pykolab.getConf()
+
+def __init__():
+    commands.register('examine_message', execute, description=description())
+
+def description():
+    return _("List messages in a folder")
+
+def execute(*args, **kw):
+    """
+        List messages in a folder
+    """
+
+    try:
+        folder = conf.cli_args.pop(0)
+
+        try:
+            uid = conf.cli_args.pop(0)
+        except:
+            log.error(_("Specify a message UID"))
+            sys.exit(1)
+
+    except:
+        log.error(_("Specify a folder"))
+        sys.exit(1)
+
+    imap = IMAP()
+    imap.connect()
+
+    _folder = imap.lm(imap_utf7.encode(folder))
+
+    if _folder == None or _folder == []:
+        log.error(_("No such folder"))
+        sys.exit(1)
+
+    imap.set_acl(folder, 'cyrus-admin', 'lrs')
+
+    imap.select(imap_utf7.encode(folder))
+
+    typ, data = imap.fetch(uid, '(RFC822)')
+    print typ, data[0][1]
+
+    imap.set_acl(folder, 'cyrus-admin', '')

pykolab-0.7.1.tar.gz/pykolab/cli/cmd_list_contacts.py Added

@@ -0,0 +1,86 @@
+# -*- coding: utf-8 -*-
+# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
+#
+# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 3 or, at your option, any later version
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+
+import sys
+
+import commands
+
+import pykolab
+
+from pykolab import imap_utf7
+from pykolab.imap import IMAP
+from pykolab.translate import _
+
+log = pykolab.getLogger('pykolab.cli')
+conf = pykolab.getConf()
+
+def __init__():
+    commands.register('list_contacts', execute, description=description())
+
+def description():
+    return _("List messages in a folder")
+
+def execute(*args, **kw):
+    """
+        List messages in a folder
+    """
+
+    try:
+        folder = conf.cli_args.pop(0)
+
+    except:
+        log.error(_("Specify a folder"))
+        sys.exit(1)
+
+    imap = IMAP()
+    imap.connect()
+
+    _folder = imap.lm(imap_utf7.encode(folder))
+
+    if _folder == None or _folder == []:
+        log.error(_("No such folder"))
+        sys.exit(1)
+
+    imap.set_acl(folder, 'cyrus-admin', 'lrs')
+
+    imap.select(imap_utf7.encode(folder))
+
+    typ, data = imap.search(None, '(ALL UNDELETED HEADER X-Kolab-Type application/x-vnd.kolab.contact)')
+
+    num_messages = len(data[0].split())
+
+    for num in data[0].split():
+        typ, flags = imap.fetch(num, 'FLAGS')
+        flags = flags[0].split()
+        if len(flags) >= 3:
+            # Any flags are set
+            if flags[2] == '(\\Deleted))':
+                print num, '\Deleted'
+            elif flags[2] == '(\\Deleted':
+                print num, '\Deleted'
+            elif '\\Deleted' in flags[3:]:
+                print num, '\Deleted'
+            elif '\\Deleted))' in flags[3:]:
+                print num, '\Deleted'
+            else:
+                print num
+        else:
+            print num
+
+    imap.set_acl(folder, 'cyrus-admin', '')

pykolab-0.7.1.tar.gz/pykolab/cli/cmd_list_events.py Added

@@ -0,0 +1,86 @@
+# -*- coding: utf-8 -*-
+# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
+#
+# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 3 or, at your option, any later version
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+
+import sys
+
+import commands
+
+import pykolab
+
+from pykolab import imap_utf7
+from pykolab.imap import IMAP
+from pykolab.translate import _
+
+log = pykolab.getLogger('pykolab.cli')
+conf = pykolab.getConf()
+
+def __init__():
+    commands.register('list_events', execute, description=description())
+
+def description():
+    return _("List messages in a folder")
+
+def execute(*args, **kw):
+    """
+        List messages in a folder
+    """
+
+    try:
+        folder = conf.cli_args.pop(0)
+
+    except:
+        log.error(_("Specify a folder"))
+        sys.exit(1)
+
+    imap = IMAP()
+    imap.connect()
+
+    _folder = imap.lm(imap_utf7.encode(folder))
+
+    if _folder == None or _folder == []:
+        log.error(_("No such folder"))
+        sys.exit(1)
+
+    imap.set_acl(folder, 'cyrus-admin', 'lrs')
+
+    imap.select(imap_utf7.encode(folder))
+
+    typ, data = imap.search(None, '(ALL UNDELETED HEADER X-Kolab-Type application/x-vnd.kolab.event)')
+
+    num_messages = len(data[0].split())
+
+    for num in data[0].split():
+        typ, flags = imap.fetch(num, 'FLAGS')
+        flags = flags[0].split()
+        if len(flags) >= 3:
+            # Any flags are set
+            if flags[2] == '(\\Deleted))':
+                print num, '\Deleted'
+            elif flags[2] == '(\\Deleted':
+                print num, '\Deleted'
+            elif '\\Deleted' in flags[3:]:
+                print num, '\Deleted'
+            elif '\\Deleted))' in flags[3:]:
+                print num, '\Deleted'
+            else:
+                print num
+        else:
+            print num
+
+    imap.set_acl(folder, 'cyrus-admin', '')

pykolab-0.7.1.tar.gz/pykolab/cli/cmd_rebalance_mailboxes.py Added

@@ -0,0 +1,132 @@
+# -*- coding: utf-8 -*-
+# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
+#
+# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 3 or, at your option, any later version
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+
+import sys
+
+import commands
+
+import pykolab
+
+from pykolab.auth import Auth
+from pykolab.imap import IMAP
+from pykolab.translate import _
+
+log = pykolab.getLogger('pykolab.cli')
+conf = pykolab.getConf()
+
+def __init__():
+    commands.register('rebalance_mailboxes', execute, description=description())
+
+def cli_options():
+    my_option_group = conf.add_cli_parser_option_group(_("CLI Options"))
+    my_option_group.add_option( '--dry-run',
+                                dest    = "dry_run",
+                                action  = "store_true",
+                                default = False,
+                                help    = _("Do a dry run."))
+
+def description():
+    return """List quota for a folder."""
+
+def execute(*args, **kw):
+    """
+        List quota for a mailbox
+    """
+
+    imap = IMAP()
+    imap.connect()
+
+    auth = Auth()
+    auth.connect()
+
+    domains = auth.list_domains()
+
+    folders = {}
+
+    for domain in domains.keys():
+        for folder in imap.lm("user/%%@%s" % (domain)):
+            folders[folder] = get_quota(imap, folder)
+
+        for folder in imap.lm("shared/%%@%s" % (domain)):
+            folders[folder] = get_quota(imap, folder)
+
+    for folder in imap.lm("user/%%"):
+        folders[folder] = get_quota(imap, folder)
+
+    for folder in imap.lm("shared/%%"):
+        folders[folder] = get_quota(imap, folder)
+
+    for folder in folders.keys():
+        if folders[folder] == None:
+            del folders[folder]
+
+    for folder in folders:
+        folders[folder]['server'] = imap.imap.find_mailfolder_server(folder)
+
+    # Data gathered, calculations can begin.
+    mboxs = {}
+    used = {}
+    alloc = {}
+
+    for folder in folders:
+        if not mboxs.has_key(folders[folder]['server']):
+            mboxs[folders[folder]['server']] = 0
+
+        if not used.has_key(folders[folder]['server']):
+            used[folders[folder]['server']] = 0
+
+        if not alloc.has_key(folders[folder]['server']):
+            alloc[folders[folder]['server']] = 0
+
+        mboxs[folders[folder]['server']] += 1
+        used[folders[folder]['server']] += folders[folder]['used']
+        alloc[folders[folder]['server']] += folders[folder]['quota']
+
+    #mboxs = {'bs101.kolabsys.net': 2812, 'bs102.kolabsys.net': 46, 'bs103.kolabsys.net': 6}
+    #used = {'bs101.kolabsys.net': 7508435, 'bs102.kolabsys.net': 586967, 'bs103.kolabsys.net': 121}
+    #alloc = {'bs101.kolabsys.net': 3279032832, 'bs102.kolabsys.net': 60817408, 'bs103.kolabsys.net': 6291456}
+
+    print "number of mailboxes per node:", mboxs
+    print "average per mailbox:", sum(mboxs.values()) / len(mboxs.keys())
+    for (k,v) in mboxs.iteritems():
+        print "k:", k, "is", float(v * len(mboxs.keys())) / float(sum(mboxs.values())), "%"
+
+    print "used:", used
+    print "used average:", sum(used.values()) / len(used.keys())
+    for (k,v) in used.iteritems():
+        if (float(sum(used.values())) > 0):
+            print "k:", k, "is", float(v * len(used.keys())) / float(sum(used.values())), "%"
+
+        print "average storage per mailbox:", float(used[k]) / float(mboxs[k])
+
+    print alloc
+    print sum(alloc.values()) / len(alloc.keys())
+    for (k,v) in alloc.iteritems():
+        if (float(sum(alloc.values())) > 0):
+            print "k:", k, "is", float(v * len(alloc.keys())) / float(sum(alloc.values())), "%"
+        print "average quota per mailbox:", float(alloc[k]) / float(mboxs[k])
+
+
+def get_quota(imap, folder):
+    try:
+        (used, quota) = imap.get_quota(folder)
+        if not used == None and not quota == None:
+            return {'used': used, 'quota': quota}
+    except:
+        return None

pykolab-0.7.1.tar.gz/pykolab/cli/cmd_role_info.py Added

@@ -0,0 +1,47 @@
+# -*- coding: utf-8 -*-
+# Copyright 2010-2012 Kolab Systems AG (http://www.kolabsys.com)
+#
+# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 3 or, at your option, any later version
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+
+import commands
+
+import pykolab
+
+from pykolab import utils
+from pykolab.translate import _
+
+log = pykolab.getLogger('pykolab.cli')
+conf = pykolab.getConf()
+
+def __init__():
+    commands.register('role_info', execute, description="Display role information.")
+
+def execute(*args, **kw):
+    from pykolab import wap_client
+
+    try:
+        role = conf.cli_args.pop(0)
+    except IndexError, errmsg:
+        role = utils.ask_question(_("Role"))
+
+    # Create the authentication object.
+    # TODO: Binds with superuser credentials!
+    wap_client.authenticate(username=conf.get("ldap", "bind_dn"), password=conf.get("ldap", "bind_pw"))
+    role = wap_client.role_info(role)
+
+    print role
+

pykolab-0.7.1.tar.gz/pykolab/cli/cmd_summarize_quota_allocation.py Added

@@ -0,0 +1,74 @@
+# -*- coding: utf-8 -*-
+# Copyright 2010-2013 Kolab Systems AG (http://www.kolabsys.com)
+#
+# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 3 or, at your option, any later version
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+
+import sys
+
+import commands
+
+import pykolab
+
+from pykolab.imap import IMAP
+from pykolab.translate import _
+
+log = pykolab.getLogger('pykolab.cli')
+conf = pykolab.getConf()
+
+def __init__():
+    commands.register('summarize_quota_allocation', execute, description=description(), aliases=['sqa'])
+
+def cli_options():
+    my_option_group = conf.add_cli_parser_option_group(_("CLI Options"))
+    my_option_group.add_option( '--server',
+                                dest    = "connect_server",
+                                action  = "store",
+                                default = None,
+                                metavar = "SERVER",
+                                help    = _("List mailboxes on server SERVER only."))
+
+def description():
+    return """Summarize all quota allocated."""
+
+def execute(*args, **kw):
+    """
+        Summarize all quota allocated.
+    """
+
+    imap = IMAP()
+
+    if not conf.connect_server == None:
+        imap.connect(server=conf.connect_server)
+    else:
+        imap.connect()
+
+    quota_folders = imap.list_folders('*')
+
+    quota_alloc = 0
+    quota_used = 0
+
+    for quota_folder in quota_folders:
+        try:
+            (used, quota) = imap.get_quota(quota_folder)
+            if not used == None and not quota == None:
+                quota_alloc += float(quota)
+                used += float(used)
+        except:
+            pass
+
+    print "Quota Allocated:\t%-5d GB" % ((quota_alloc / 1024 / 1024))
+    print "Quota Used:\t%-5d GB" % ((quota_alloc / 1024 / 1024))

pykolab-0.7.0.tar.gz/pykolab/conf/__init__.py -> pykolab-0.7.1.tar.gz/pykolab/conf/__init__.py Changed

pykolab-0.7.0.tar.gz/pykolab/conf/defaults.py -> pykolab-0.7.1.tar.gz/pykolab/conf/defaults.py Changed

pykolab-0.7.1.tar.gz/pykolab/constants.py Added

@@ -0,0 +1,120 @@
+# -*- coding: utf-8 -*-
+# Copyright 2010 Kolab Systems AG (http://www.kolabsys.com)
+#
+# Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen a kolabsys.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+import math
+import socket
+import sys
+
+from pykolab.translate import _
+
+__license__   = "GPLv2+"
+__copyright__ = "Kolab Systems AG"
+__version__   = '0.7.1'
+__release__   = '1'
+
+if 1 < 1:
+    __status__    = 'snapshot'
+elif math.floor((float)(1)) < (float)(1):
+    __status__    = 'prerelease'
+else:
+    __status__    = 'stable'
+
+domain = 'pykolab'
+
+epilog = _("PyKolab is a Kolab Systems product. For more information about Kolab or PyKolab, visit http://www.kolabsys.com")
+
+COMPONENTS = [
+        'imap',
+        'ldap',
+        'mta'
+    ]
+
+hostname = socket.gethostname()
+fqdn = socket.getfqdn()
+try:
+    domain_parts = fqdn.split('.')
+    if len(domain_parts) < 3:
+        print >> sys.stderr, _("WARNING") + ": " + _("The Fully Qualified Domain Name or FQDN for this system is incorrect. Falling back to 'localdomain'.")
+        domainname = "localdomain"
+    else:
+        domainname = '.'.join(domain_parts[1:])
+except IndexError:
+    domainname = "localdomain"
+
+# The system RC directory
+RC_DIR = "/etc/rc.d/init.d/"
+KOLAB_LIB_PATH = '/var/lib/kolab/'
+
+# Service map;
+#
+# Convert names of registered system services to their type. For example,
+# on Red Hat, OpenLDAP is 'slapd', whereas on Debian, OpenLDAP is 'ldap'.
+#
+SERVICE_MAP = {
+        'dirsrv': {
+                'type':         '389ds',
+                'description':  _('389 Directory Server or Red Hat Directory Server')
+            },
+        'ldap': {
+                'type':         'openldap',
+                'description':  _('OpenLDAP or compatible')
+            },
+        'slapd': {
+                'type':         'openldap',
+                'description':  _('OpenLDAP or compatible')
+            },
+    }
+
+import ldap
+LDAP_SCOPE = {
+        'base': ldap.SCOPE_BASE,
+        'sub': ldap.SCOPE_SUBTREE,
+        'one': ldap.SCOPE_ONELEVEL
+    }
+
+SUPPORTED_LDAP_CONTROLS = {
+        0: {
+                'desc': 'Persistent Search Control',
+                'oid': '2.16.840.1.113730.3.4.3',
+                'func': '_persistent_search'
+            },
+        1: {
+                'desc': 'OpenLDAP Syncrepl (RFC4533)',
+                'oid': '1.3.6.1.4.1.4203.1.9.1.1',
+                'func': '_sync_repl'
+            },
+        2: {
+                'desc': 'Simple Paged Results Control',
+                'oid': '1.2.840.113556.1.4.319',
+                'func': '_paged_search'
+            },
+        3: {
+                'desc': 'Virtual List View Control',
+                'oid': '2.16.840.1.113730.3.4.9',
+                'func': '_vlv_search'
+            },
+    }
+
+#SUPPORTED_LDAP_CONTROLS = {
+#        0: {
+#                'desc': 'OpenLDAP Syncrepl (RFC4533)',
+#                'oid': '1.3.6.1.4.1.4203.1.9.1.1',
+#                'func': '_sync_repl'
+#            }
+#    }

pykolab-0.7.0.tar.gz/pykolab/imap/__init__.py -> pykolab-0.7.1.tar.gz/pykolab/imap/__init__.py Changed

pykolab-0.7.0.tar.gz/pykolab/logger.py -> pykolab-0.7.1.tar.gz/pykolab/logger.py Changed

@@ -162,24 +162,26 @@
 
                         sys.exit(1)
 
-                try:
-                    os.chown(
-                            self.logfile,
-                            user_uid,
-                            group_gid
-                        )
-                    os.chmod(self.logfile, 0660)
-                except Exception, errmsg:
-                    self.error(_("Could not change permissions on %s: %r") % (self.logfile, errmsg))
-                    if self.debuglevel > 8:
-                        import traceback
-                        traceback.print_exc()
+                if os.path.isfile(self.logfile):
+                    try:
+                        os.chown(
+                                self.logfile,
+                                user_uid,
+                                group_gid
+                            )
+                        os.chmod(self.logfile, 0660)
+                    except Exception, errmsg:
+                        self.error(_("Could not change permissions on %s: %r") % (self.logfile, errmsg))
+                        if self.debuglevel > 8:
+                            import traceback
+                            traceback.print_exc()
 
         except Exception, errmsg:
-            self.error(_("Could not change permissions on %s: %r") % (self.logfile, errmsg))
-            if self.debuglevel > 8:
-                import traceback
-                traceback.print_exc()
+            if os.path.isfile(self.logfile):
+                self.error(_("Could not change permissions on %s: %r") % (self.logfile, errmsg))
+                if self.debuglevel > 8:
+                    import traceback
+                    traceback.print_exc()
 
         # Make sure the log file exists
         try:

pykolab-0.7.0.tar.gz/pykolab/setup/setup_freebusy.py -> pykolab-0.7.1.tar.gz/pykolab/setup/setup_freebusy.py Changed

@@ -78,6 +78,10 @@
     if scheme == None or scheme == "":
         scheme = 'imaps'
 
+    if scheme == "imaps" and port == 993:
+        scheme = "imap"
+        port = 143
+
     resources_imap_uri = '%s://%s:%s@%s:%s/%%kolabtargetfolder?acl=lrs' % (scheme, admin_login, admin_password, hostname, port)
     users_imap_uri = '%s://%%s:%s@%s:%s/?proxy_auth=%s' % (scheme, admin_password, hostname, port, admin_login)
 
@@ -101,7 +105,7 @@
                     'attributes': 'mail',
                     'lc_attributes': 'mail',
                     'fbsource': users_imap_uri,
-                    'cacheto': '/var/cache/kolab-freebusy/%mail.ifb',
+                    'cacheto': '/var/cache/kolab-freebusy/%s.ifb',
                     'expires': '15m',
                     'loglevel': 300,
                 },
@@ -114,7 +118,7 @@
                     'attributes': 'mail, kolabtargetfolder',
                     'filter': '(&(objectClass=kolabsharedfolder)(kolabfoldertype=event)(mail=%s))',
                     'fbsource': resources_imap_uri,
-                    'cacheto': '/var/cache/kolab-freebusy/%mail.ifb',
+                    'cacheto': '/var/cache/kolab-freebusy/%s.ifb',
                     'expires': '15m',
                     'loglevel': 300,
                 },

pykolab-0.7.0.tar.gz/pykolab/setup/setup_kolabd.py -> pykolab-0.7.1.tar.gz/pykolab/setup/setup_kolabd.py Changed

pykolab-0.7.0.tar.gz/pykolab/setup/setup_mta.py -> pykolab-0.7.1.tar.gz/pykolab/setup/setup_mta.py Changed

@@ -224,7 +224,7 @@
 bind_dn = %(service_bind_dn)s
 bind_pw = %(service_bind_pw)s
 
-query_filter = (&(|(mail=%%s)(alias=%%s))(objectclass=kolabsharedfolder))
+query_filter = (&(|(mail=%%s)(alias=%%s))(objectclass=kolabsharedfolder)(kolabFolderType=mail))
 result_attribute = kolabtargetfolder
 result_format = shared+%%s
 """ % {
@@ -260,7 +260,7 @@
             "smtpd_tls_security_level": "may",
             "smtp_tls_security_level": "may",
             "smtpd_sasl_auth_enable": "yes",
-            "smtpd_sender_login_maps": "$relay_recipient_maps",
+            "smtpd_sender_login_maps": "$local_recipient_maps",
             "smtpd_sender_restrictions": "permit_mynetworks, reject_sender_login_mismatch",
             "smtpd_recipient_restrictions": "permit_mynetworks, reject_unauth_pipelining, reject_rbl_client zen.spamhaus.org, reject_non_fqdn_recipient, reject_invalid_helo_hostname, reject_unknown_recipient_domain, reject_unauth_destination, check_policy_service unix:private/recipient_policy_incoming, permit",
             "smtpd_sender_restrictions": "permit_mynetworks, check_policy_service unix:private/sender_policy_incoming",
@@ -388,6 +388,8 @@
             fp = open('/etc/amavisd/amavisd.conf', 'w')
         elif os.path.isdir('/etc/amavis'):
             fp = open('/etc/amavis/amavisd.conf', 'w')
+        elif os.path.isfile('/etc/amavisd.conf'):
+            fp = open('/etc/amavisd.conf', 'w')
 
         if not fp == None:
             fp.write(t.__str__())
@@ -418,10 +420,18 @@
             myaugeas.save()
         myaugeas.close()
 
+    if os.path.isfile('/etc/default/wallace'):
+        myaugeas = Augeas()
+        setting = os.path.join('/files/etc/default/wallace','START')
+        if not myaugeas.get(setting) == 'yes':
+            myaugeas.set(setting,'yes')
+            myaugeas.save()
+        myaugeas.close()
+
     if os.path.isfile('/bin/systemctl'):
         subprocess.call(['systemctl', 'restart', 'postfix.service'])
         subprocess.call(['systemctl', 'restart', 'amavisd.service'])
-        subprocess.call(['systemctl', 'restart', 'clamd.amavisd.service'])
+        subprocess.call(['systemctl', 'restart', 'clamd@amavisd.service'])
         subprocess.call(['systemctl', 'restart', 'wallace.service'])
     elif os.path.isfile('/sbin/service'):
         subprocess.call(['service', 'postfix', 'restart'])
@@ -439,7 +449,7 @@
     if os.path.isfile('/bin/systemctl'):
         subprocess.call(['systemctl', 'enable', 'postfix.service'])
         subprocess.call(['systemctl', 'enable', 'amavisd.service'])
-        subprocess.call(['systemctl', 'enable', 'clamd.amavisd.service'])
+        subprocess.call(['systemctl', 'enable', 'clamd@amavisd.service'])
         subprocess.call(['systemctl', 'enable', 'wallace.service'])
     elif os.path.isfile('/sbin/chkconfig'):
         subprocess.call(['chkconfig', 'postfix', 'on'])

pykolab-0.7.0.tar.gz/pykolab/setup/setup_mysql.py -> pykolab-0.7.1.tar.gz/pykolab/setup/setup_mysql.py Changed

pykolab-0.7.0.tar.gz/pykolab/setup/setup_syncroton.py -> pykolab-0.7.1.tar.gz/pykolab/setup/setup_syncroton.py Changed

@@ -44,15 +44,18 @@
     for root, directories, filenames in os.walk('/usr/share/doc/'):
         for directory in directories:
             if directory.startswith("kolab-syncroton"):
-                for root, directories, filenames in os.walk(os.path.join('/usr/share/doc/', directory)):
+                for root, directories, filenames in os.walk(os.path.join(root, directory)):
                     for filename in filenames:
                         if filename.startswith('mysql.initial') and filename.endswith('.sql'):
                             schema_filepath = os.path.join(root,filename)
                             if not schema_filepath in schema_files:
                                 schema_files.append(schema_filepath)
+                                break
 
-                break
-        break
+                if len(schema_files) > 0
+                    break
+        if len(schema_files) > 0
+            break
 
     if not os.path.isfile('/tmp/kolab-setup-my.cnf'):
         utils.multiline_message(

pykolab-0.7.0.tar.gz/pykolab/wap_client/__init__.py -> pykolab-0.7.1.tar.gz/pykolab/wap_client/__init__.py Changed

pykolab-0.7.1.tar.gz/pykolab/xml/task.py Added

pykolab-0.7.1.tar.gz/pylint.log Added

pykolab-0.7.1.tar.gz/saslauthd/Makefile.in Added

@@ -0,0 +1,522 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = saslauthd
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(saslauthd_PYTHON) $(top_srcdir)/py-compile
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__py_compile = PYTHON=$(PYTHON) $(SHELL) $(py_compile)
+am__installdirs = "$(DESTDIR)$(saslauthddir)"
+am__pep3147_tweak = \
+  sed -e 's|\.py$$||' -e 's|[^/]*$$|__pycache__/&.*.py|'
+py_compile = $(top_srcdir)/py-compile
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALL_LINGUAS = @ALL_LINGUAS@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DATESTAMP = @DATESTAMP@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLLIBS = @INTLLIBS@
+INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
+INTLTOOL_MERGE = @INTLTOOL_MERGE@
+INTLTOOL_PERL = @INTLTOOL_PERL@
+INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
+INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
+INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
+INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
+INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MSGFMT_OPTS = @MSGFMT_OPTS@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

pykolab-0.7.0.tar.gz/saslauthd/__init__.py -> pykolab-0.7.1.tar.gz/saslauthd/__init__.py Changed

pykolab-0.7.0.tar.gz/saslauthd/kolab-saslauthd.sysvinit -> pykolab-0.7.1.tar.gz/saslauthd/kolab-saslauthd.sysvinit Changed

pykolab-0.7.1.tar.gz/share/Makefile.in Added

@@ -0,0 +1,519 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = share
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(rctemplatedir)" \
+	"$(DESTDIR)$(templatedir)"
+DATA = $(rctemplate_DATA) $(template_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALL_LINGUAS = @ALL_LINGUAS@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DATESTAMP = @DATESTAMP@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLLIBS = @INTLLIBS@
+INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
+INTLTOOL_MERGE = @INTLTOOL_MERGE@
+INTLTOOL_PERL = @INTLTOOL_PERL@
+INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
+INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
+INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
+INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
+INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MSGFMT_OPTS = @MSGFMT_OPTS@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@

pykolab-0.7.0.tar.gz/share/templates/roundcubemail/acl.inc.php.tpl -> pykolab-0.7.1.tar.gz/share/templates/roundcubemail/acl.inc.php.tpl Changed

pykolab-0.7.0.tar.gz/share/templates/roundcubemail/calendar.inc.php.tpl -> pykolab-0.7.1.tar.gz/share/templates/roundcubemail/calendar.inc.php.tpl Changed

pykolab-0.7.1.tar.gz/share/templates/roundcubemail/kolab_addressbook.inc.php.tpl Added

pykolab-0.7.0.tar.gz/share/templates/roundcubemail/kolab_folders.inc.php.tpl -> pykolab-0.7.1.tar.gz/share/templates/roundcubemail/kolab_folders.inc.php.tpl Changed

pykolab-0.7.1.tar.gz/tests/functional/test_kolabd/test_004_many_aliases.py Added

@@ -0,0 +1,53 @@
+import time
+import unittest
+
+import pykolab
+from pykolab import wap_client
+from pykolab.auth import Auth
+from pykolab.imap import IMAP
+
+conf = pykolab.getConf()
+
+class TestKolabDaemon(unittest.TestCase):
+    @classmethod
+    def setup_class(self, *args, **kw):
+        from tests.functional.purge_users import purge_users
+        purge_users()
+
+#    @classmethod
+#    def teardown_class(self, *args, **kw):
+#        from tests.functional.purge_users import purge_users
+#        purge_users()
+
+    def test_001_create_user(self):
+        from tests.functional.user_add import user_add
+        user_add("John", "Doe")
+
+        time.sleep(3)
+
+        auth = Auth()
+        auth.connect()
+
+        max_tries = 20
+        while max_tries > 0:
+            recipient = auth.find_recipient('john.doe@example.org')
+
+            if not recipient:
+                time.sleep(1)
+                max_tries -= 1
+            else:
+                break
+
+        imap = IMAP()
+        imap.connect()
+
+        folders = imap.lm('user/john.doe@example.org')
+        self.assertEqual(len(folders), 1, "No INBOX found for user John")
+
+    def test_002_add_aliases(self):
+        auth = Auth()
+        auth.connect()
+
+        recipient = auth.find_recipient('john.doe@example.org')
+        wap_client.user_edit(recipient, {'alias': ['webmaster@example.org', 'root@example.org', 'postmaster@example.org', 'hostmaster@example.org']})
+

pykolab-0.7.0.tar.gz/tests/functional/test_wallace/test_005_resource_invitation.py -> pykolab-0.7.1.tar.gz/tests/functional/test_wallace/test_005_resource_invitation.py Changed

pykolab-0.7.1.tar.gz/tests/functional/test_wallace/test_006_gpgencrypt.py Added

@@ -0,0 +1,257 @@
+import time
+import pykolab
+import smtplib
+import email
+import datetime
+import uuid
+
+from pykolab import wap_client
+from pykolab.auth import Auth
+from pykolab.imap import IMAP
+
+from email import message_from_string
+
+import tests.functional.resource_func as funcs
+
+conf = pykolab.getConf()
+
+class TestGPGEncrypt(unittest.TestCase):
+    @classmethod
+    def setUp(self):
+        """ Compatibility for twisted.trial.unittest
+        """
+        if not self.john:
+            self.setup_class()
+
+    @classmethod
+    def setup_class(self, *args, **kw):
+        from tests.functional.purge_users import purge_users
+        purge_users()
+
+        self.john = {
+            'displayname': 'John Doe',
+            'mail': 'john.doe@example.org',
+            'sender': 'John Doe <john.doe@example.org>',
+            'mailbox': 'user/john.doe@example.org'
+        }
+
+        from tests.functional.user_add import user_add
+        user_add("John", "Doe")
+
+        funcs.purge_resources()
+        self.audi = funcs.resource_add("car", "Audi A4")
+        self.passat = funcs.resource_add("car", "VW Passat")
+        self.boxter = funcs.resource_add("car", "Porsche Boxter S")
+        self.cars = funcs.resource_add("collection", "Company Cars", [ self.audi['dn'], self.passat['dn'], self.boxter['dn'] ])
+
+        time.sleep(1)
+        from tests.functional.synchronize import synchronize_once
+        synchronize_once()
+
+    def send_message(self, msg_source, to_addr, from_addr=None):
+        if from_addr is None:
+            from_addr = self.john['mail']
+
+        smtp = smtplib.SMTP('localhost', 10026)
+        smtp.sendmail(from_addr, to_addr, msg_source)
+
+    def send_itip_invitation(self, resource_email, start=None):
+        if start is None:
+            start = datetime.datetime.now()
+
+        uid = str(uuid.uuid4())
+        end = start + datetime.timedelta(hours=4)
+        self.send_message(itip_invitation % (
+                resource_email,
+                uid,
+                start.strftime('%Y%m%dT%H%M%S'),
+                end.strftime('%Y%m%dT%H%M%S'),
+                resource_email
+            ),
+            resource_email)
+
+        return uid
+
+    def send_itip_update(self, resource_email, uid, start=None):
+        if start is None:
+            start = datetime.datetime.now()
+
+        end = start + datetime.timedelta(hours=4)
+        self.send_message(itip_update % (
+                resource_email,
+                uid,
+                start.strftime('%Y%m%dT%H%M%S'),
+                end.strftime('%Y%m%dT%H%M%S'),
+                resource_email
+            ),
+            resource_email)
+
+        return uid
+
+    def send_itip_cancel(self, resource_email, uid):
+        self.send_message(itip_cancellation % (
+                resource_email,
+                uid,
+                resource_email
+            ),
+            resource_email)
+
+        return uid
+
+
+    def check_message_received(self, subject, from_addr=None):
+        imap = IMAP()
+        imap.connect()
+        imap.set_acl(self.john['mailbox'], "cyrus-admin", "lrs")
+        imap.imap.m.select(self.john['mailbox'])
+
+        found = None
+        retries = 10
+
+        while not found and retries > 0:
+            retries -= 1
+
+            typ, data = imap.imap.m.search(None, '(UNDELETED HEADER FROM "%s")' % (from_addr) if from_addr else 'UNDELETED')
+            for num in data[0].split():
+                typ, msg = imap.imap.m.fetch(num, '(RFC822)')
+                message = message_from_string(msg[0][1])
+                if message['Subject'] == subject:
+                    found = message
+                    break
+
+            time.sleep(1)
+
+        imap.disconnect()
+
+        return found
+
+    def check_resource_calendar_event(self, mailbox, uid=None):
+        imap = IMAP()
+        imap.connect()
+
+        imap.imap.m.select(u'"'+mailbox+'"')
+
+        found = None
+        retries = 10
+
+        while not found and retries > 0:
+            retries -= 1
+
+            typ, data = imap.imap.m.search(None, '(UNDELETED HEADER SUBJECT "%s")' % (uid) if uid else '(UNDELETED HEADER X-Kolab-Type "application/x-vnd.kolab.event")')
+            for num in data[0].split():
+                typ, data = imap.imap.m.fetch(num, '(RFC822)')
+                event_message = message_from_string(data[0][1])
+
+                # return matching UID or first event found
+                if uid and event_message['subject'] != uid:
+                    continue
+
+                for part in event_message.walk():
+                    if part.get_content_type() == "application/calendar+xml":
+                        payload = part.get_payload(decode=True)
+                        found = pykolab.xml.event_from_string(payload)
+                        break
+
+                if found:
+                    break
+
+            time.sleep(1)
+
+        return found
+
+    def purge_mailbox(self, mailbox):
+        imap = IMAP()
+        imap.connect()
+        imap.set_acl(mailbox, "cyrus-admin", "lrwcdest")
+        imap.imap.m.select(u'"'+mailbox+'"')
+
+        typ, data = imap.imap.m.search(None, 'ALL')
+        for num in data[0].split():
+            imap.imap.m.store(num, '+FLAGS', '\\Deleted')
+
+        imap.imap.m.expunge()
+        imap.disconnect()
+
+
+    def test_001_resource_from_email_address(self):
+        resource = module_resources.resource_record_from_email_address(self.audi['mail'])
+        self.assertEqual(len(resource), 1)
+        self.assertEqual(resource[0], self.audi['dn'])
+
+        collection = module_resources.resource_record_from_email_address(self.cars['mail'])
+        self.assertEqual(len(collection), 1)
+        self.assertEqual(collection[0], self.cars['dn'])
+
+
+    def test_002_invite_resource(self):
+        uid = self.send_itip_invitation(self.audi['mail'], datetime.datetime(2014,7,13, 10,0,0))
+
+        response = self.check_message_received("Reservation Request for test was ACCEPTED", self.audi['mail'])
+        self.assertIsInstance(response, email.message.Message)
+
+        event = self.check_resource_calendar_event(self.audi['kolabtargetfolder'], uid)
+        self.assertIsInstance(event, pykolab.xml.Event)
+        self.assertEqual(event.get_summary(), "test")
+
+
+    def test_003_invite_resource_conflict(self):
+        uid = self.send_itip_invitation(self.audi['mail'], datetime.datetime(2014,7,13, 12,0,0))
+

pykolab-0.7.1.tar.gz/tests/unit/test-011-base64_encoded_contact.py Added

@@ -0,0 +1,77 @@
+from email import message_from_string
+from email.MIMEMultipart import MIMEMultipart
+from email.MIMEBase import MIMEBase
+from email.MIMEImage import MIMEImage
+from email.MIMEText import MIMEText
+from email.Utils import COMMASPACE, formatdate
+from email import Encoders
+import sys
+import unittest
+
+class TestContactBase64EncodedXML(unittest.TestCase):
+    def assertIsInstance(self, _value, _type):
+        if hasattr(unittest.TestCase, 'assertIsInstance'):
+            return unittest.TestCase.assertIsInstance(self, _value, _type)
+        else:
+            if (type(_value)) == _type:
+                return True
+            else:
+                raise AssertionError, "%s != %s" % (type(_value), _type)
+
+    def test_001_base64_encoded_xml(self):
+        msg = """From: vanmeeuwen@demo.kolab.org
+Reply-To:
+Bcc:
+To: synckolab@no.tld
+Subject: sk-vc-3AC0C113BFADC313
+Date: Sun, 17 Feb 2013 10:21:40 -0500
+Content-Type: Multipart/Mixed;boundary="Boundary-00=363B189F14E3799C"
+User-Agent: SyncKolab 3.0.0
+X-Kolab-Type: application/vcard+xml
+
+--Boundary-00=363B189F14E3799C
+Content-Type: Text/Plain;
+ charset="us-ascii"
+Content-Transfer-Encoding: 7bit
+
+This is a Kolab Groupware object.
+To view this object you will need an email client that can understand the Kolab Groupware format.
+For a list of such email clients please visit
+http://kolab.org/content/kolab-clients
+---
+Name: van Meeuwen Jeroen
+E-Mail:kanarip@kanarip.com
+---
+
+Notice:
+The information above is only valid, if no other client than synckolab updated this message. (ie. a client that updates the attachment but not the message)
+
+--Boundary-00=363B189F14E3799C
+Content-Type: application/vcard+xml;
+ name="kolab.xml"
+Content-Transfer-Encoding: base64
+Content-Disposition: attachment;
+ filename="kolab.xml"
+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+--Boundary-00=363B189F14E3799C--
+"""
+        message = message_from_string(msg)
+
+if __name__ == '__main__':
+    unittest.main()

pykolab-0.7.1.tar.gz/tests/unit/test-012-utf7.py Added

pykolab-0.7.1.tar.gz/tests/unit/test-013-bitmask.py Added

pykolab-0.7.1.tar.gz/tests/unit/test-015-platform.py Added

pykolab-0.7.1.tar.gz/wallace/Makefile.in Added

@@ -0,0 +1,525 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = wallace
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(wallace_PYTHON) $(top_srcdir)/py-compile
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__py_compile = PYTHON=$(PYTHON) $(SHELL) $(py_compile)
+am__installdirs = "$(DESTDIR)$(wallacedir)"
+am__pep3147_tweak = \
+  sed -e 's|\.py$$||' -e 's|[^/]*$$|__pycache__/&.*.py|'
+py_compile = $(top_srcdir)/py-compile
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALL_LINGUAS = @ALL_LINGUAS@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DATESTAMP = @DATESTAMP@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLLIBS = @INTLLIBS@
+INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
+INTLTOOL_MERGE = @INTLTOOL_MERGE@
+INTLTOOL_PERL = @INTLTOOL_PERL@
+INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
+INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
+INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
+INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
+INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MSGFMT_OPTS = @MSGFMT_OPTS@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

pykolab-0.7.0.tar.gz/wallace/module_resources.py -> pykolab-0.7.1.tar.gz/wallace/module_resources.py Changed

@@ -205,10 +205,13 @@
         for recipient in recipients:
             # extract reference UID from recipients like resource+UID@domain.org
             if re.match('.+\+[A-Za-z0-9=/-]+@', recipient):
-                (prefix, host) = recipient.split('@')
-                (local, uid) = prefix.split('+')
-                reference_uid = base64.b64decode(uid, '-/')
-                recipient = local + '@' + host
+                try:
+                    (prefix, host) = recipient.split('@')
+                    (local, uid) = prefix.split('+')
+                    reference_uid = base64.b64decode(uid, '-/')
+                    recipient = local + '@' + host
+                except:
+                    continue
 
             if not len(resource_record_from_email_address(recipient)) == 0:
                 resource_recipient = recipient
@@ -530,6 +533,9 @@
         level=9
     )
 
+    # set read ACLs for admin user
+    imap.set_acl(mailbox, conf.get(conf.get('kolab', 'imap_backend'), 'admin_login'), "lrs")
+
     # might raise an exception, let that bubble
     imap.imap.m.select(imap.folder_quote(mailbox))
     typ, data = imap.imap.m.search(None, 'ALL')
@@ -683,7 +689,7 @@
         if replace:
             delete_resource_event(itip_event['uid'], resource)
         else:
-            imap.imap.m.setacl(targetfolder, conf.get(conf.get('kolab', 'imap_backend'), 'admin_login'), "lrswipkxtecda")
+            imap.set_acl(targetfolder, conf.get(conf.get('kolab', 'imap_backend'), 'admin_login'), "lrswipkxtecda")
 
         result = imap.imap.m.append(
             targetfolder,
@@ -706,7 +712,7 @@
         Removes the IMAP object with the given UID from a resource's calendar folder
     """
     targetfolder = imap.folder_quote(resource['kolabtargetfolder'])
-    imap.imap.m.setacl(targetfolder, conf.get(conf.get('kolab', 'imap_backend'), 'admin_login'), "lrswipkxtecda")
+    imap.set_acl(targetfolder, conf.get(conf.get('kolab', 'imap_backend'), 'admin_login'), "lrswipkxtecda")
     imap.imap.m.select(targetfolder)
 
     typ, data = imap.imap.m.search(None, '(HEADER SUBJECT "%s")' % uid)

pykolab-0.7.0.tar.gz/wallace/wallace.sysvinit -> pykolab-0.7.1.tar.gz/wallace/wallace.sysvinit Changed

pykolab.dsc Changed