Request 2871 (accepted)

Overview

Request 2871 (accepted)

A selfcontained guam variant.

Created by mollekopf about 3 years ago
In state accepted
Open review for Admin
Open review for vanmeeuwen

Submit guam-selfcontained

Submit package Kolab:Winterfell / guam-selfcontained to package Kolab:16 / guam-selfcontained

guam.spec Added

@@ -0,0 +1,349 @@
+%if 0%{?opensuse_bs}
+#!BuildIgnore:  ghostscript-x11
+%endif
+
+%global debug_package %{nil}
+
+%global realname kolab_guam
+%global binname guam
+
+%if 0%{?suse_version} < 1 && 0%{?fedora} < 1 && 0%{?rhel} < 7
+%global with_systemd 0
+%else
+%global with_systemd 1
+%endif
+
+%{!?_unitdir: %global _unitdir /usr/lib/systemd/system}
+%{!?_erldir: %global _erldir /usr/lib64/erlang/}
+%{!?_erllibdir: %global _erllibdir /usr/lib64/erlang/lib}
+
+%define lock_version() %{1}%{?_isa} = %(rpm -q --queryformat "%%{VERSION}" %{1})
+
+Name:               guam
+Version:            0.9.11
+Release:            1%{?dist}
+Summary:            A Smart Reverse IMAP Proxy
+
+Group:              System Environment/Daemons
+License:            GPLv3+
+URL:                https://kolab.org/about/guam
+
+Source0:            guam-%{version}.tar.gz
+Source100:          plesk.sys.config
+
+#Patch9991:          nodeps.patch
+
+BuildRequires:      erlang >= 17.4
+BuildRequires:      erlang-asn1
+BuildRequires:      erlang-common_test
+BuildRequires:      erlang-compiler
+BuildRequires:      erlang-crypto
+BuildRequires:      erlang-debugger
+BuildRequires:      erlang-erts
+BuildRequires:      erlang-et
+BuildRequires:      erlang-kernel
+BuildRequires:      erlang-mnesia
+BuildRequires:      erlang-observer
+BuildRequires:      erlang-public_key
+BuildRequires:      erlang-runtime_tools
+BuildRequires:      erlang-sasl
+BuildRequires:      erlang-snmp
+BuildRequires:      erlang-ssh
+BuildRequires:      erlang-ssl
+BuildRequires:      erlang-stdlib
+BuildRequires:      erlang-syntax_tools
+BuildRequires:      erlang-tools
+BuildRequires:      erlang-wx
+BuildRequires:      erlang-xmerl
+BuildRequires:      git
+
+Requires:           erlang
+Requires:           which
+
+%if 0%{?with_systemd}
+%if 0%{?suse_version}
+Requires(post):     systemd
+Requires(postun):   systemd
+Requires(preun):    systemd
+%else
+Requires(post):     systemd-units
+Requires(postun):   systemd-units
+Requires(preun):    coreutils
+Requires(preun):    systemd-units
+%endif
+%else
+Requires(post):     chkconfig
+Requires(post):     initscripts
+Requires(postun):   initscripts
+Requires(preun):    chkconfig
+Requires(preun):    initscripts
+%endif
+
+%description
+Guam is a smart, unjustly outcast Reverse IMAP Proxy that lives at
+the perimeter of your IMAP environment.
+
+%prep
+%setup -q
+
+%build
+
+DEBUG=1
+export DEBUG
+
+# Only available since hex v0.9.0
+HEX_OFFLINE=true
+export HEX_OFFLINE
+
+REBAR_CACHE_DIR=cache/rebar3/
+export REBAR_CACHE_DIR
+
+# Rebuild all beam files (The otp version from the tarball may not match)
+rm -rf _build
+./rebar3 compile
+
+./rebar3 release \
+    --dev-mode false \
+    --relname %{name} \
+    --relvsn %{version} \
+    --verbose
+
+%install
+
+find -type f | sort
+
+mkdir -p \
+    %{buildroot}%{_sysconfdir}/%{name}/ \
+    %{buildroot}%{_sbindir} \
+    %{buildroot}%{_erldir}/bin/ \
+    %{buildroot}%{_erllibdir}/ \
+%if 0%{?with_systemd}
+    %{buildroot}%{_unitdir}/ \
+%else
+    %{buildroot}%{_initddir}/ \
+%endif
+    %{buildroot}%{_var}/log/%{name}/
+
+# Configuration
+cp _build/default/rel/%{name}/etc/sys.config \
+    %{buildroot}%{_sysconfdir}/%{name}/sys.config
+cp _build/default/rel/%{name}/vm.args \
+    %{buildroot}%{_sysconfdir}/%{name}/vm.args
+
+# Service scripts
+%if 0%{?with_systemd}
+install -p -m 644 contrib/%{name}.service \
+    %{buildroot}%{_unitdir}/%{name}.service
+%else
+install -p -m 755 contrib/%{name}.sysvinit \
+    %{buildroot}%{_initddir}/%{name}
+%endif
+
+pushd %{buildroot}%{_erldir}/bin/
+ln -s ../lib/%{realname}-%{version}/bin/%{binname} %{realname}
+popd
+
+mkdir -p %{buildroot}%{_erllibdir}/%{realname}-%{version}/bin/
+cp -av _build/default/rel/%{name}/bin/* %{buildroot}%{_erllibdir}/%{realname}-%{version}/bin/
+
+# Remove the sources
+find _build/default/rel/%{name}/lib/ -type d -name "src" -exec rm -Rf {} +
+
+# Copy over all lib dirs
+cp -av _build/default/rel/%{name}/lib/* %{buildroot}%{_erllibdir}/
+
+# Copy over the release directory as well
+cp -av _build/default/rel/%{name}/releases/ %{buildroot}%{_erllibdir}/%{realname}-%{version}/
+
+%if 0%{?plesk}
+install -m 644 -p %{SOURCE100} %{buildroot}%{_sysconfdir}/guam/sys.config
+%endif
+
+pushd %{buildroot}%{_erllibdir}/%{realname}-%{version}/releases/%{version}/
+rm sys.config vm.args
+ln -sv ../../../../../../..%{_sysconfdir}/%{name}/sys.config sys.config
+ln -sv ../../../../../../..%{_sysconfdir}/%{name}/vm.args vm.args
+popd
+
+pushd %{buildroot}%{_erllibdir}/%{realname}-%{version}/
+ln -s ../../lib lib
+ln -s ../../../../..%{_var}/log/%{name} log
+popd
+
+cat > %{buildroot}%{_sbindir}/%{name} << EOF
+#!/bin/bash
+exec %{_erllibdir}/%{realname}-%{version}/bin/%{binname} \$*
+EOF
+
+%check
+
+DEBUG=1
+export DEBUG
+
+HEX_OFFLINE=true
+export HEX_OFFLINE
+
+REBAR_CACHE_DIR=cache/rebar3/
+export REBAR_CACHE_DIR
+
+./rebar3 eunit -v
+./rebar3 ct -v
+
+%postun
+%if 0%{?with_systemd}
+%systemd_postun %{name}.service
+%endif
+
+%if 0%{?with_systemd}
+%post
+%systemd_post %{name}.service
+
+if [ ! -f "/etc/guam/dh_2048.pem" ]; then
+    openssl gendh -out /etc/guam/dh_2048.pem -2 2048 >/dev/null 2>&1 || \
+    openssl dhparam -out /etc/guam/dh_2048.pem -2 2048 >/dev/null 2>&1
+fi
+
+%preun
+%systemd_preun %{name}.service
+
+%posttrans
+test -f /etc/sysconfig/guam-disable-posttrans || \
+    systemctl try-restart %{name}.service 2>&1 || :
+
+%else
+%post
+chkconfig --add %{name} >/dev/null 2>&1 || :
+
+if [ ! -f "/etc/guam/dh_2048.pem" ]; then
+    openssl gendh -out /etc/guam/dh_2048.pem -2 2048 >/dev/null 2>&1 || \
+    openssl dhparam -out /etc/guam/dh_2048.pem -2 2048 >/dev/null 2>&1
+fi
+
+%posttrans
+test -f /etc/sysconfig/guam-disable-posttrans || \
+    %{_sbindir}/service restart %{name} 2>&1 || :
+%endif
+
+%files
+%config(noreplace) %{_sysconfdir}/%{name}/sys.config
+%config(noreplace) %{_sysconfdir}/%{name}/vm.args
+%attr(0750,root,root) %{_sbindir}/%{name}
+%{_libdir}/erlang/bin/%{realname}
+%{_libdir}/erlang/lib/
+%attr(0640,root,root) %{_var}/log/%{name}/
+
+%if 0%{?with_systemd}
+%{_unitdir}/%{name}.service
+%else
+%{_initddir}/%{name}
+%endif
+
+%changelog
+* Mon Jun 07 2021 Christian Mollekopf <mollekopf@kolabsys.com> - 0.9.11-1
+- Release of version 0.9.11
+
+* Mon May 31 2021 Christian Mollekopf <mollekopf@kolabsys.com> - 0.9.10-1
+- Release of version 0.9.10
+
+* Mon Dec 14 2020 Christian Mollekopf <mollekopf@kolabsys.com> - 0.9.9-1
+- Release of version 0.9.9
+
+* Mon Nov 9 2020 Christian Mollekopf <mollekopf@kolabsys.com> - 0.9.8-2
+- Fixed STARTTLS
+
+* Mon Oct 26 2020 Christian Mollekopf <mollekopf@kolabsys.com> - 0.9.8-1
+- Release of version 0.9.8
+
+* Wed Apr 15 2020 Christian Mollekopf <mollekopf@kolabsys.com> - 0.9.7-1
+- Release of version 0.9.7
+
+* Tue Mar 31 2020 Christian Mollekopf <mollekopf@kolabsys.com> - 0.9.6-1
+- Release of version 0.9.6
+
+* Thu Dec  5 2019 Jeroen van Meeuwen <vanmeeuwen@kolabsys.com> - 0.9.5-1
+- Release of version 0.9.5
+
+* Wed May 15 2019 Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com> - 0.9.4-15
+- Fix LIST-EXTENDED, LIST-STATUS and LIST return options for purely numerical folder names
+
+* Tue Apr 23 2019 Christian Mollekopf (Kolab Systems) <mollekopf@kolabsys.com> - 0.9.4-14
+- Removed the unavailable syslog backend for plesk
+
+* Wed Jan  2 2019 Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com> - 0.9.4-10
+- Fix LIST-EXTENDED, LIST-STATUS and LIST return options response filtering
+
+* Thu Oct  4 2018 Jeroen van Meeuwen <vanmeeuwen@kolabsys.com> - 0.9.4-9
+- Add cacertfile setting for Plesk (Bifrost T143291)
+
+* Wed Jul 18 2018 Christoph Erhardt <kolab@sicherha.de> - 0.9.4-8
+- Add run-time dependency on which
+
+* Sat May 19 2018 Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com> - 0.9.4-7
+- Fix generating dh params file on more recent openssl versions
+
+* Tue May 08 2018 Christoph Erhardt <kolab@sicherha.de> - 0.9.4-6
+- Apply patch that fixes stalling client buffers and handling of split commands
+
+* Fri May 04 2018 Christoph Erhardt <kolab@sicherha.de> - 0.9.4-5
+- Make logs go to /var/log/guam
+
+* Sat Apr 21 2018 Christoph Erhardt <kolab@sicherha.de> - 0.9.4-4
+- Fix packaging, dependencies and more stuff
+
+* Thu Apr 19 2018 Christoph Erhardt <kolab@sicherha.de> - 0.9.4-3
+- Use script rather than symlink
+
+* Thu Apr 19 2018 Christoph Erhardt <kolab@sicherha.de> - 0.9.4-2
+- Ship correct variants of sys.config and vm.args
+
+* Sun Apr 15 2018 Christoph Erhardt <kolab@sicherha.de> - 0.9.4-1
+- Release version 0.9.4
+
+* Tue Feb 27 2018 Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com> - 0.9.2-3
+- Allow empty lines in commands
+
+* Mon Jun 26 2017 Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com> - 0.9.2-2
+- Fix T25795
+
+* Mon Jun 19 2017 Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com> - 0.9.2-1
+- Release version 0.9.2
+
+* Tue Jul 12 2016 Aaron Seigo <seigo@kolabsystems.com> - 0.8.3-1
+- Release of version 0.8.3
+
+* Fri Jul  8 2016 Jeroen van Meeuwen <vanmeeuwen@kolabsys.com> - 0.8.2-2
+- Fix T1345
+
+* Wed Jul  6 2016 Aaron Seigo <seigo@kolabsystems.com> - 0.8.2-1
+- Release of version 0.8.2
+
+* Tue Jul  5 2016 Jeroen van Meeuwen <vanmeeuwen@kolabsys.com> - 0.8.1-1
+- Release of version 0.8.1
+
+* Fri Jun 10 2016 Aaron Seigo <seigo@kolabsystems.com>
+- Package version 0.8
+
+* Tue Feb  2 2016 Jeroen van Meeuwen <vanmeeuwen@kolabsys.com> - 0.7.1-1
+- Check in systemd init script fixes
+
+* Mon Jan  4 2016 Jeroen van Meeuwen <vanmeeuwen@kolabsys.com> - 0.7.0-1
+- Release of 0.7.0
+
+* Mon Dec 21 2015 Jeroen van Meeuwen <vanmeeuwen@kolabsys.com> - 0.6-0.1.git
+- Check in 0.6 from git master HEAD to introduce CI/CD
+
+* Wed Dec 16 2015 Jeroen van Meeuwen <vanmeeuwen@kolabsys.com> - 0.5-0.1.git
+- Release of 0.5
+- Enhance groupware filtering
+
+* Tue Dec  8 2015 Jeroen van Meeuwen <vanmeeuwen@kolabsys.com> - 0.4-0.1.git
+- Release of 0.4
+
+* Mon Dec  7 2015 Jeroen van Meeuwen <vanmeeuwen@kolabsys.com> - 0.3-0.1.git
+- Third iteration with more/better TLS configuration support
+
+* Mon Nov 30 2015 Jeroen van Meeuwen <vanmeeuwen@kolabsys.com> - 0.2-0.1.git
+- Second iteration with TLS configuration
+
+* Thu Nov 26 2015 Jeroen van Meeuwen <vanmeeuwen@kolabsys.com> - 0.1-0.1.git
+- First package

nodeps.patch Added

README.md Added

buildtarball.sh Added

debian.changelog Added

@@ -0,0 +1,220 @@
+guam (0.9.11-1) unstable; urgency=medium
+
+  * Release of version 0.9.11
+
+ -- Christian Mollekopf (Kolab Systems) <mollekopf@kolabsys.com>  Mon,  07 Jun 2021 09:31:31 +0200
+
+guam (0.9.10-1) unstable; urgency=medium
+
+  * Release of version 0.9.10
+
+ -- Christian Mollekopf (Kolab Systems) <mollekopf@kolabsys.com>  Mon,  31 May 2021 09:31:31 +0200
+
+guam (0.9.9-1) unstable; urgency=medium
+
+  * Release of version 0.9.9
+
+ -- Christian Mollekopf (Kolab Systems) <mollekopf@kolabsys.com>  Mon,  14 Dec 2020 09:31:31 +0200
+
+guam (0.9.8-2) unstable; urgency=medium
+
+  * Fixed STARTTLS
+
+ -- Christian Mollekopf (Kolab Systems) <mollekopf@kolabsys.com>  Mon,  9 Nov 2020 09:31:31 +0200
+
+guam (0.9.8-1) unstable; urgency=medium
+
+  * Release of version 0.9.8
+
+ -- Christian Mollekopf (Kolab Systems) <mollekopf@kolabsys.com>  Mon,  26 Oct 2020 09:31:31 +0200
+
+guam (0.9.7-3) unstable; urgency=medium
+
+  * Updated debian/postinst script
+
+ -- Daniel Hoffend <dh@dotlan.net>  Wed,  22 Apr 2020 00:46:22 +0200
+
+guam (0.9.7-1) unstable; urgency=medium
+
+  * Release of version 0.9.7
+
+ -- Christian Mollekopf (Kolab Systems) <mollekopf@kolabsys.com>  Wed,  15 Apr 2020 09:31:31 +0200
+
+guam (0.9.6-1) unstable; urgency=medium
+
+  * Release of version 0.9.6
+
+ -- Christian Mollekopf (Kolab Systems) <mollekopf@kolabsys.com>  Tue,  31 Mar 2020 09:31:31 +0200
+
+guam (0.9.5-2) unstable; urgency=medium
+
+  * Release of version 0.9.5
+
+ -- Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>  Thu,  5 Dec 2019 09:31:31 +0200
+
+guam (0.9.4-16) unstable; urgency=medium
+
+  * Fix LIST-EXTENDED, LIST-STATUS and other LIST return options for purely numeric folder names (T209164)
+
+ -- Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>  Wed, 15 May 2019 09:31:31 +0200
+
+guam (0.9.4-14) unstable; urgency=medium
+
+  * Removed the unavailable syslog backend for plesk.
+
+ -- Christian Mollekopf (Kolab Systems) <mollekopf@kolabsys.com>  Tue,  23 Apr 2019 09:31:31 +0200
+
+guam (0.9.4-13) unstable; urgency=medium
+
+  * Fix LIST-EXTENDED, LIST-STATUS and other LIST return options response filtering (Bifrost T160184)
+
+ -- Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>  Wed,  2 Jan 2019 09:31:31 +0200
+
+guam (0.9.4-12) unstable; urgency=medium
+
+  * Rebuild
+
+ -- Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>  Thu, 13 Dec 2018 09:31:31 +0200
+
+guam (0.9.4-9) unstable; urgency=medium
+
+  * Add setting cacertfile for Plesk (Bifrost T143291)
+
+ -- Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>  Thu,  4 Oct 2018 09:31:31 +0200
+
+guam (0.9.4-8) unstable; urgency=medium
+
+  * Fix lib symlink
+  * Add missing dependency on erlang-goldrush
+
+ -- Christoph Erhardt <kolab@sicherha.de>  Wed, 04 Jul 2018 09:04:39 +0200
+
+guam (0.9.4-7) unstable; urgency=medium
+
+  * Fix generating DH parameters on openssl >= 1.1.0f with gendh->dhparam
+
+ -- Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>  Sat, 19 May 2018 09:31:31 +0200
+
+guam (0.9.4-6) unstable; urgency=medium
+
+  * Apply patch that fixes stalling client buffers and handling of split commands
+
+ -- Christoph Erhardt <kolab@sicherha.de>  Tue, 08 May 2018 09:31:31 +0200
+
+guam (0.9.4-5) unstable; urgency=medium
+
+  * Add erlang-eimap to guam-bundled-libs
+  * Make logs go to /var/log/guam
+
+ -- Christoph Erhardt <kolab@sicherha.de>  Fri, 04 May 2018 09:59:56 +0200
+
+guam (0.9.4-4) unstable; urgency=medium
+
+  * Fix packaging, dependencies and more stuff
+  * Make package compatible with Erlang from backports
+
+ -- Christoph Erhardt <kolab@sicherha.de>  Sat, 21 Apr 2017 10:39:28 +0200
+
+guam (0.9.4-3) unstable; urgency=medium
+
+  * Use script rather than symlink
+
+ -- Christoph Erhardt <kolab@sicherha.de>  Thu, 19 Apr 2017 21:33:45 +0200
+
+guam (0.9.4-2) unstable; urgency=medium
+
+  * Ship correct variants of sys.config and vm.args
+
+ -- Christoph Erhardt <kolab@sicherha.de>  Thu, 19 Apr 2017 19:36:20 +0200
+
+guam (0.9.4-1) unstable; urgency=medium
+
+  * Release of version 0.9.4
+
+ -- Christoph Erhardt <kolab@sicherha.de>  Sun, 15 Apr 2017 23:14:48 +0200
+
+guam (0.9.2-4) unstable; urgency=medium
+
+  * Allow empty lines in commands
+
+ -- Jeroen van Meeuwen <vanmeeuwen@kolabsys.com>  Tue, 27 Feb 2018 06:06:06 +0600
+
+guam (0.9.2-3) unstable; urgency=medium
+
+  * Rebuild
+
+ -- Jeroen van Meeuwen <vanmeeuwen@kolabsys.com>  Tue, 29 Aug 2017 06:06:06 +0600
+
+guam (0.9.2-2) unstable; urgency=medium
+
+  * Fix potentially empty responses
+  * Fix T25795 / IDLE passthrough
+
+ -- Jeroen van Meeuwen <vanmeeuwen@kolabsys.com>  Mon, 26 Jun 2017 06:06:06 +0600
+
+guam (0.9.2-1) unstable; urgency=medium
+
+  * Release of version 0.9.2
+
+ -- Jeroen van Meeuwen <vanmeeuwen@kolabsys.com>  Mon, 19 Jun 2017 06:06:06 +0600
+
+guam (0.8.3-1.3) unstable; urgency=medium
+
+  * Ship a different default config for Plesk
+  * Unmask service if masked
+
+ -- Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com>  Wed,  8 Feb 2017 12:12:12 +0100
+
+guam (0.8.3-1) unstable; urgency=medium
+
+  * Release of 0.8.3
+
+ -- Aaron Seigo <seigo@kolabsystems.com>  Tue,  12 Jul 2016 13:00:00 +0600
+
+guam (0.8.2-2) unstable; urgency=medium
+
+  * Fix T1345
+
+ -- Jeroen van Meeuwen <vanmeeuwen@kolabsys.com>  Fri,  8 Jul 2016 06:06:06 +0600
+
+guam (0.8.2-1) unstable; urgency=medium
+
+  * Release of 0.8.2
+
+ -- Aaron Seigo <seigo@kolabsystems.com>  Wed,  6 Jul 2016 13:00:00 +0600
+
+guam (0.8.1-1) unstable; urgency=medium
+
+  * Release of 0.8.1
+
+ -- Jeroen van Meeuwen <vanmeeuwen@kolabsys.com>  Tue,  5 Jul 2016 06:06:06 +0600
+
+guam (0.8-2mic1) unstable; urgency=medium
+
+  * add patches from rpm builds
+
+ -- hede <kolab983@der-he.de>  Tue, 28 Jun 2016 06:54:23 +0100
+
+guam (0.8-2) unstable; urgency=medium
+
+  * Package version 0.8
+
+ -- Aaron Seigo <seigo@kolabsystems.com>  Fri, 10 Jun 2016 10:54:23 +0100
+
+guam (0.8-1+git20160219~kolab1) unstable; urgency=medium
+
+  * Bump to new git version.
+
+ -- Christoph Erhardt <kolab@sicherha.de>  Sat, 27 Feb 2016 23:30:08 +0100
+
+guam (0.8-1+git20160111~kolab1) unstable; urgency=medium
+
+  * Bump to new git version.
+
+ -- Christoph Erhardt <kolab@sicherha.de>  Thu, 11 Feb 2016 21:04:08 +0100
+
+guam (0.7.1-1~kolab1) unstable; urgency=medium
+
+  * Initial release.
+
+ -- Christoph Erhardt <kolab@sicherha.de>  Sun, 07 Feb 2016 08:48:37 +0100

debian.control Added

@@ -0,0 +1,41 @@
+Source: guam
+Section: mail
+Priority: extra
+Maintainer: Christoph Erhardt <kolab@sicherha.de>
+Standards-Version: 3.9.6
+Build-Depends: debhelper (>= 10) | dh-systemd (>= 1.5),
+	erlang (>= 17.4),
+	erlang-eimap (>= 0.3.0),
+	erlang-goldrush (>= 0.2.0),
+	erlang-lager,
+	erlang-lager-syslog,
+	psa | bash,
+	erlang-rebar3 (>= 3.3.2)
+Homepage: https://kolab.org/about/guam
+
+Package: guam
+Architecture: any
+Section: mail
+Depends: ${misc:Depends}, ${dist:GuamDepends}
+Description: Smart Reverse IMAP Proxy
+ Guam is a smart, unjustly outcast Reverse IMAP Proxy that lives at
+ the perimeter of your IMAP environment.
+
+Package: guam-libs
+Architecture: any
+Section: mail
+Depends: ${misc:Depends}, ${dist:GuamLibDepends}
+Conflicts: guam-bundled-libs
+Description: Dependency meta-package for Guam
+ This package pulls in all the library dependencies required to run Guam.
+ Debian backports users who have a backported Erlang version may need to install
+ guam-bundled-libs instead.
+
+Package: guam-bundled-libs
+Architecture: any
+Section: mail
+Depends: ${misc:Depends}, ${dist:GuamBundleDepends}
+Conflicts: guam-libs
+Description: Bundled runtime environment for Guam
+ This is a support package for Debian backports users who have a backported
+ Erlang version. All others should preferably use guam-libs.

debian.rules Added

@@ -0,0 +1,128 @@
+#!/usr/bin/make -f
+
+include /usr/share/dpkg/pkg-info.mk
+
+DESTDIR   = $(CURDIR)/debian/guam
+LIBDIR    = $(CURDIR)/debian/guam-libs
+BUNDLEDIR = $(CURDIR)/debian/guam-bundled-libs
+
+# The versions of all dependencies are hardcoded by relx (which honestly sucks).
+# The following magic tries to ensure that the Debian package's dependencies are
+# pinned to the versions present on the build machine.
+# Usually, we pull in the package "guam-libs", which declares all the regular
+# dependencies and creates an appropriate "lib" symlink.
+# However, if the dependencies cannot be satisfied on the end user's machine -
+# for instance because a  different Erlang version was installed from backports
+# - we make the package manager pull in an extra package "guam-bundled-libs"
+# that contains all the dependencies in the exact versions expected by relx.
+#
+# For maintainers, the bottom line is this: please revision-bump this package
+# every time one of its dependencies gets version-bumped.
+currver = $(shell dpkg-query -f '$${Version}' -W $(1) | sed 's/[+-].*$$//')
+nextver = $(shell echo $(call currver,$(1)) | perl -pe 's/((\d+\.)*)(\d+)$$/$$1.($$3+1)/e')
+pinvermin = $(1) (>= $(call currver,$(1)))
+pinvermax = $(1) (<< $(call nextver,$(1)))
+pinver    = $(call pinvermin,$(1)), $(call pinvermax,$(1))
+pinvererlmin = $(1) (>= $(call currver,erlang))
+pinvererlmax = $(1) (<< $(call nextver,erlang))
+
+# We ship these packages ourselves, so they don't need bundling
+KOLAB_PROVIDED_DEPS := $(call pinver,erlang-eimap), $(call pinver,erlang-lager-syslog)
+EIMAP_DIR        := eimap-$(call currver,erlang-eimap)
+LAGER_SYSLOG_DIR := lager_syslog-$(call currver,erlang-lager-syslog)
+
+SUBSTVARS += -Vdist:GuamDepends="guam-libs (= $(DEB_VERSION)) | guam-bundled-libs (= $(DEB_VERSION))"
+SUBSTVARS += -Vdist:GuamLibDepends="$(call pinvererlmin,erlang-base) | $(call pinvererlmin,erlang-base-hipe), $(call pinvererlmax,erlang-base) | $(call pinvererlmax,erlang-base-hipe), $(KOLAB_PROVIDED_DEPS), $(call pinver,erlang-asn1), $(call pinver,erlang-goldrush), $(call pinver,erlang-inets), $(call pinver,erlang-lager), $(call pinver,erlang-public-key)"
+SUBSTVARS += -Vdist:GuamBundleDepends="$(KOLAB_PROVIDED_DEPS)"
+
+%:
+	dh $@ --with=systemd
+
+override_dh_auto_build:
+	sed -i -e 's/include_erts,\s*false/include_erts, true/' rebar.config
+	export DEBUG=1
+	export HEX_OFFLINE=1
+	./rebar3 release \
+		--dev-mode false \
+		--relname guam \
+		--relvsn $(DEB_VERSION_UPSTREAM) \
+		--verbose
+
+
+override_dh_auto_clean:
+	./rebar3 clean || :
+
+override_dh_auto_test:
+	./rebar3 eunit -v || :
+
+override_dh_auto_install:
+	mkdir -p $(DESTDIR)/usr/sbin $(DESTDIR)/etc/guam \
+		$(DESTDIR)/lib/systemd/system $(DESTDIR)/var/log/ \
+		$(DESTDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/ \
+		$(DESTDIR)/usr/lib/erlang/bin $(DESTDIR)/var/log/guam
+	chmod o= $(DESTDIR)/var/log/guam
+
+	install -p -m 644 contrib/guam.service \
+	        $(DESTDIR)/lib/systemd/system/guam.service
+
+	cp -a _build/default/rel/guam/bin \
+		$(DESTDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/
+
+	cp -a _build/default/rel/guam/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/ebin \
+		$(DESTDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/
+
+	rm _build/default/rel/guam/releases/$(DEB_VERSION_UPSTREAM)/sys.config
+	rm _build/default/rel/guam/releases/$(DEB_VERSION_UPSTREAM)/vm.args
+
+	cp -a _build/default/rel/guam/releases \
+		$(DESTDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/
+
+	if [ -f "/etc/plesk-release" ]; then \
+		cp ../SOURCES/plesk.sys.config \
+			$(DESTDIR)/etc/guam/sys.config ; \
+	else \
+		sed -i -e 's/pki\/tls\/private\/localhost\.pem/ssl\/certs\/ssl-cert-snakeoil.pem/' \
+			-e 's/pki\/tls\/private\/localhost\.ca\.pem/ssl\/certs\/ssl-cert-snakeoil.pem/' \
+			-e 's/pki\/tls\/private\/localhost\.key/ssl\/private\/ssl-cert-snakeoil.key/' \
+			_build/default/rel/guam/etc/sys.config ; \
+		cp _build/default/rel/guam/etc/sys.config \
+			$(DESTDIR)/etc/guam/sys.config ; \
+	fi
+
+	ln -s ../../../../../../../etc/guam/sys.config \
+		$(DESTDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/releases/$(DEB_VERSION_UPSTREAM)/sys.config
+
+	cp _build/default/rel/guam/vm.args $(DESTDIR)/etc/guam/vm.args
+
+	ln -s ../../../../../../../etc/guam/vm.args \
+		$(DESTDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/releases/$(DEB_VERSION_UPSTREAM)/vm.args
+
+	ln -s ../../../../../var/log/guam $(DESTDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/log
+
+	echo '#!/bin/bash' > $(DESTDIR)/usr/sbin/guam
+	echo 'exec /usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/bin/guam $$*' \
+	     >> $(DESTDIR)/usr/sbin/guam
+	chmod +x $(DESTDIR)/usr/sbin/guam
+
+	ln -s ../lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/bin/guam \
+		$(DESTDIR)/usr/lib/erlang/bin/kolab_guam
+
+	# Symlink for system-installed libraries
+	mkdir -p $(LIBDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)
+	ln -s ../../lib $(LIBDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/lib
+
+	# Bundled runtime system and libraries
+	mkdir -p $(BUNDLEDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)
+	cp -a _build/default/rel/guam/erts-* \
+		$(BUNDLEDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/
+	cp -a _build/default/rel/guam/lib \
+		$(BUNDLEDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/
+	rm -r $(BUNDLEDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)
+	ln -s .. $(BUNDLEDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)
+	for dir in $(EIMAP_DIR) $(LAGER_SYSLOG_DIR); do \
+		rm -r $(BUNDLEDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/lib/$$dir; \
+		ln -s ../../$$dir $(BUNDLEDIR)/usr/lib/erlang/lib/kolab_guam-$(DEB_VERSION_UPSTREAM)/lib/$$dir; \
+	done
+
+override_dh_gencontrol:
+	dh_gencontrol -- $(SUBSTVARS)

debian.series Added

debian.tar.gz Added

guam-0.9.11.tar.gz Added

guam.dsc Added

plesk.sys.config Added

@@ -0,0 +1,181 @@
+%% Example configuration for Guam.
+[
+    {
+        kolab_guam, [
+            {
+                imap_servers, [
+                    {
+                        imap, [
+                            { host, "127.0.0.1" },
+                            { port, 9143 },
+                            { tls, no }
+                        ]
+                    },
+                    {
+                        imaps, [
+                            { host, "127.0.0.1" },
+                            { port, 9993 },
+                            { tls, true }
+                        ]
+                    }
+                ]
+            },
+            {
+                listeners, [
+                    {
+                        imap, [
+                            { port, 143 },
+                            { imap_server, imap },
+                            {
+                                rules, [
+                                    { filter_groupware, [] }
+                                ]
+                            },
+                            {
+                                tls_config, [
+                                    { certfile, "/etc/dovecot/private/dovecot.pem" },
+                                    { cacertfile, "/etc/dovecot/private/dovecot.pem" },
+                                    { dhfile, "/etc/guam/dh_2048.pem" },
+                                    { verify, verify_none },
+                                    { versions, [ 'tlsv1.2', 'tlsv1.1', tlsv1] },
+                                    { fail_if_no_peer_cert, false },
+                                    { honor_cipher_order, true },
+                                    { ciphers, [
+                                                    "ECDHE-ECDSA-AES256-GCM-SHA384",
+                                                    "ECDHE-RSA-AES256-GCM-SHA384",
+                                                    "ECDHE-ECDSA-AES256-SHA384",
+                                                    "ECDHE-RSA-AES256-SHA384",
+                                                    "ECDHE-ECDSA-DES-CBC3-SHA",
+                                                    "ECDH-ECDSA-AES256-GCM-SHA384",
+                                                    "ECDH-RSA-AES256-GCM-SHA384",
+                                                    "ECDH-ECDSA-AES256-SHA384",
+                                                    "ECDH-RSA-AES256-SHA384",
+                                                    "DHE-DSS-AES256-GCM-SHA384",
+                                                    "DHE-DSS-AES256-SHA256",
+                                                    "AES256-GCM-SHA384",
+                                                    "AES256-SHA256",
+                                                    "ECDHE-ECDSA-AES128-GCM-SHA256",
+                                                    "ECDHE-RSA-AES128-GCM-SHA256",
+                                                    "ECDHE-ECDSA-AES128-SHA256",
+                                                    "ECDHE-RSA-AES128-SHA256",
+                                                    "ECDH-ECDSA-AES128-GCM-SHA256",
+                                                    "ECDH-RSA-AES128-GCM-SHA256",
+                                                    "ECDH-ECDSA-AES128-SHA256",
+                                                    "ECDH-RSA-AES128-SHA256",
+                                                    "DHE-DSS-AES128-GCM-SHA256",
+                                                    "DHE-DSS-AES128-SHA256",
+                                                    "AES128-GCM-SHA256",
+                                                    "AES128-SHA256",
+                                                    "ECDHE-ECDSA-AES256-SHA",
+                                                    "ECDHE-RSA-AES256-SHA",
+                                                    "DHE-DSS-AES256-SHA",
+                                                    "ECDH-ECDSA-AES256-SHA",
+                                                    "ECDH-RSA-AES256-SHA",
+                                                    "AES256-SHA",
+                                                    "ECDHE-ECDSA-AES128-SHA",
+                                                    "ECDHE-RSA-AES128-SHA",
+                                                    "DHE-DSS-AES128-SHA",
+                                                    "ECDH-ECDSA-AES128-SHA",
+                                                    "ECDH-RSA-AES128-SHA",
+                                                    "AES128-SHA"
+                                                ]
+                                        },
+                                    { client_renegotiation, false },
+                                    { secure_renegotiate, true }
+                                ]
+                            }
+                        ]
+                    },
+                    {
+                        imaps, [
+                            { port, 993 },
+                            { implicit_tls, true },
+                            { imap_server, imaps },
+                            {
+                                rules, [
+                                    { filter_groupware, [] }
+                                ]
+                            },
+                            {
+                                tls_config, [
+                                    { certfile, "/etc/dovecot/private/dovecot.pem" },
+                                    { cacertfile, "/etc/dovecot/private/dovecot.pem" },
+                                    { dhfile, "/etc/guam/dh_2048.pem" },
+                                    { verify, verify_none },
+                                    { versions, [ 'tlsv1.2', 'tlsv1.1', tlsv1] },
+                                    { fail_if_no_peer_cert, false },
+                                    { honor_cipher_order, true },
+                                    { ciphers, [
+                                                    "ECDHE-ECDSA-AES256-GCM-SHA384",
+                                                    "ECDHE-RSA-AES256-GCM-SHA384",
+                                                    "ECDHE-ECDSA-AES256-SHA384",
+                                                    "ECDHE-RSA-AES256-SHA384",
+                                                    "ECDHE-ECDSA-DES-CBC3-SHA",
+                                                    "ECDH-ECDSA-AES256-GCM-SHA384",
+                                                    "ECDH-RSA-AES256-GCM-SHA384",
+                                                    "ECDH-ECDSA-AES256-SHA384",
+                                                    "ECDH-RSA-AES256-SHA384",
+                                                    "DHE-DSS-AES256-GCM-SHA384",
+                                                    "DHE-DSS-AES256-SHA256",
+                                                    "AES256-GCM-SHA384",
+                                                    "AES256-SHA256",
+                                                    "ECDHE-ECDSA-AES128-GCM-SHA256",
+                                                    "ECDHE-RSA-AES128-GCM-SHA256",
+                                                    "ECDHE-ECDSA-AES128-SHA256",
+                                                    "ECDHE-RSA-AES128-SHA256",
+                                                    "ECDH-ECDSA-AES128-GCM-SHA256",
+                                                    "ECDH-RSA-AES128-GCM-SHA256",
+                                                    "ECDH-ECDSA-AES128-SHA256",
+                                                    "ECDH-RSA-AES128-SHA256",
+                                                    "DHE-DSS-AES128-GCM-SHA256",
+                                                    "DHE-DSS-AES128-SHA256",
+                                                    "AES128-GCM-SHA256",
+                                                    "AES128-SHA256",
+                                                    "ECDHE-ECDSA-AES256-SHA",
+                                                    "ECDHE-RSA-AES256-SHA",
+                                                    "DHE-DSS-AES256-SHA",
+                                                    "ECDH-ECDSA-AES256-SHA",
+                                                    "ECDH-RSA-AES256-SHA",
+                                                    "AES256-SHA",
+                                                    "ECDHE-ECDSA-AES128-SHA",
+                                                    "ECDHE-RSA-AES128-SHA",
+                                                    "DHE-DSS-AES128-SHA",
+                                                    "ECDH-ECDSA-AES128-SHA",
+                                                    "ECDH-RSA-AES128-SHA",
+                                                    "AES128-SHA"
+                                                ]
+                                        },
+                                    { client_renegotiation, false },
+                                    { secure_renegotiate, true }
+                                ]
+                            }
+                        ]
+                    }
+                ]
+            }
+        ]
+    },
+
+    {
+        lager, [
+            {
+                handlers, [
+                    { lager_console_backend, info },
+                    { lager_file_backend, [ { file, "log/error.log"}, { level, error } ] },
+                    { lager_file_backend, [ { file, "log/console.log"}, { level, info } ] }
+                ]
+            }
+        ]
+    },
+
+    %% SASL config
+    {
+        sasl, [
+            { sasl_error_logger, { file, "log/sasl-error.log" } },
+            { errlog_type, error },
+            { error_logger_mf_dir, "log/sasl" },      % Log directory
+            { error_logger_mf_maxbytes, 10485760 },   % 10 MB max file size
+            { error_logger_mf_maxfiles, 5 }           % 5 files max
+        ]
+    }
+].

Build Results
RPM Lint

Refresh

Comments for request 2871 0

Request History

mollekopf created request about 3 years ago

A selfcontained guam variant.

mollekopf accepted request about 3 years ago